From: Ladislav Michl <ladis@linux-mips.org>
To: barebox@lists.infradead.org
Subject: [PATCH 13/16] mtd: nand_bbt: scan for next free bbt block if writing bbt fails
Date: Sun, 28 Oct 2018 22:26:23 +0100 [thread overview]
Message-ID: <20181028212622.GN14788@lenoch> (raw)
In-Reply-To: <20181028211947.GA14788@lenoch>
Linux commit 10ffd570f117 adapted for Barebox:
If erasing or writing the BBT fails, we should mark the current BBT
block as bad and use the BBT descriptor to scan for the next available
unused block in the BBT. We should only return a failure if there isn't
any space left.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
drivers/mtd/nand/nand_bbt.c | 51 ++++++++++++++++++++++++++++++++-----
1 file changed, 45 insertions(+), 6 deletions(-)
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 1d3551b4e..af992e795 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -662,6 +662,37 @@ static int get_bbt_block(struct nand_chip *this, struct nand_bbt_descr *td,
return -ENOSPC;
}
+/**
+ * mark_bbt_block_bad - Mark one of the block reserved for BBT bad
+ * @mtd: the MTD device
+ * @td: the BBT description
+ * @chip: the CHIP selector
+ * @block: the BBT block to mark
+ *
+ * Blocks reserved for BBT can become bad. This functions is an helper to mark
+ * such blocks as bad. It takes care of updating the in-memory BBT, marking the
+ * block as bad using a bad block marker and invalidating the associated
+ * td->pages[] entry.
+ */
+static void mark_bbt_block_bad(struct mtd_info *mtd,
+ struct nand_bbt_descr *td,
+ int chip, int block)
+{
+ struct nand_chip *this = mtd->priv;
+ loff_t to;
+ int res;
+
+ bbt_mark_entry(this, block, BBT_BLOCK_WORN);
+
+ to = (loff_t)block << this->bbt_erase_shift;
+ res = this->block_markbad(mtd, to);
+ if (res)
+ pr_warn("nand_bbt: error %d while marking block %d bad\n",
+ res, block);
+
+ td->pages[chip] = -1;
+}
+
/**
* write_bbt - [GENERIC] (Re)write the bad block table
* @mtd: MTD device structure
@@ -710,7 +741,7 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
}
/* Loop through the chips */
- for (; chip < nrchips; chip++) {
+ while (chip < nrchips) {
int block;
block = get_bbt_block(this, td, md, chip);
@@ -820,20 +851,28 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
einfo.addr = to;
einfo.len = 1 << this->bbt_erase_shift;
res = nand_erase_nand(mtd, &einfo, 1);
- if (res < 0)
- goto outerr;
+ if (res < 0) {
+ pr_warn("nand_bbt: error while erasing BBT block %d\n",
+ res);
+ mark_bbt_block_bad(mtd, td, chip, block);
+ continue;
+ }
res = scan_write_bbt(mtd, to, len, buf,
td->options & NAND_BBT_NO_OOB ? NULL :
&buf[len]);
- if (res < 0)
- goto outerr;
+ if (res < 0) {
+ pr_warn("nand_bbt: error while writing BBT block %d\n",
+ res);
+ mark_bbt_block_bad(mtd, td, chip, block);
+ continue;
+ }
pr_info("Bad block table written to 0x%012llx, version 0x%02X\n",
(unsigned long long)to, td->version[chip]);
/* Mark it as used */
- td->pages[chip] = page;
+ td->pages[chip++] = page;
}
return 0;
--
2.19.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-10-28 21:26 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-28 21:19 [PATCH 00/16] NAND update (1st step) Ladislav Michl
2018-10-28 21:21 ` [PATCH 01/16] mtd: nand: refactor chip->block_markbad interface Ladislav Michl
2018-10-28 21:21 ` [PATCH 02/16] mtd: nand: remove multiplied-by-2 block logic Ladislav Michl
2018-10-28 21:22 ` [PATCH 03/16] mtd: nand: hide in-memory BBT implementation details Ladislav Michl
2018-10-29 10:07 ` Ladislav Michl
2018-10-29 11:43 ` Ladislav Michl
2018-10-30 9:07 ` Sascha Hauer
2018-10-28 21:22 ` [PATCH 04/16] mtd: nand: remove NAND_BBT_SCANEMPTY Ladislav Michl
2018-10-28 21:22 ` [PATCH 05/16] mtd: nand: Request strength instead of bytes for soft BCH Ladislav Michl
2018-10-28 21:23 ` [PATCH 06/16] mtd: atmel_nand: Add per board ECC setup Ladislav Michl
2018-10-28 21:23 ` [PATCH 07/16] mtd: nand: simplify nand_bch_init() usage Ladislav Michl
2018-10-28 21:24 ` [PATCH 08/16] mtd: nand_bbt: kill NAND_BBT_SCANALLPAGES Ladislav Michl
2018-10-28 21:24 ` [PATCH 09/16] mtd: nand_bbt: handle error case for nand_create_badblock_pattern() Ladislav Michl
2018-10-28 21:25 ` [PATCH 10/16] mtd: nand_bbt: make nand_scan_bbt() static Ladislav Michl
2018-10-28 21:25 ` [PATCH 11/16] mtd: nand_bbt: unify/fix error handling in nand_scan_bbt() Ladislav Michl
2018-10-28 21:25 ` [PATCH 12/16] mtd: nand_bbt: Move BBT block selection logic out of write_bbt() Ladislav Michl
2018-10-28 21:26 ` Ladislav Michl [this message]
2018-10-28 21:26 ` [PATCH 14/16] mtd: nand: Kill the chip->scan_bbt() hook Ladislav Michl
2019-01-21 8:32 ` Sascha Hauer
2018-10-28 21:27 ` [PATCH 15/16] mtd: nand: Kill cellinfo Ladislav Michl
2018-10-28 21:27 ` [PATCH 16/16] mtd: nand: detect OOB size for Toshiba 24nm raw SLC Ladislav Michl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181028212622.GN14788@lenoch \
--to=ladis@linux-mips.org \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox