mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Lucas Stach <l.stach@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 1/4] ARM: rdu2: config PMIC SW1AB and SW1C rails to 1.375
Date: Thu,  1 Nov 2018 19:25:52 +0100	[thread overview]
Message-ID: <20181101182555.18561-1-l.stach@pengutronix.de> (raw)

This is the default out-of-reset voltage, but if only the i.MX6 SoC
got reset, the PMIC might still be stuck at the lower volatge for the
slow operating point.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 arch/arm/boards/zii-imx6q-rdu2/board.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/boards/zii-imx6q-rdu2/board.c b/arch/arm/boards/zii-imx6q-rdu2/board.c
index c99f993f02b8..49cc234c020b 100644
--- a/arch/arm/boards/zii-imx6q-rdu2/board.c
+++ b/arch/arm/boards/zii-imx6q-rdu2/board.c
@@ -16,6 +16,7 @@
 #include <common.h>
 #include <envfs.h>
 #include <gpio.h>
+#include <i2c/i2c.h>
 #include <init.h>
 #include <mach/bbu.h>
 #include <mach/imx6.h>
@@ -137,10 +138,27 @@ late_initcall(rdu2_enable_front_panel_usb);
 
 static int rdu2_devices_init(void)
 {
+	struct i2c_client client;
+
 	if (!of_machine_is_compatible("zii,imx6q-zii-rdu2") &&
 	    !of_machine_is_compatible("zii,imx6qp-zii-rdu2"))
 		return 0;
 
+	client.adapter = i2c_get_adapter(1);
+	if (client.adapter) {
+		u8 reg;
+
+		/*
+		 * Reset PMIC SW1AB and SW1C rails to 1.375V. If an event
+		 * caused only the i.MX6 SoC reset, the PMIC might still be
+		 * stuck on the low voltage for the slow operating point.
+		 */
+		client.addr = 0x08; /* PMIC i2c address */
+		reg = 0x2b; /* 1.375V, valid for both rails */
+		i2c_write_reg(&client, 0x20, &reg, 1);
+		i2c_write_reg(&client, 0x2e, &reg, 1);
+	}
+
 	barebox_set_hostname("rdu2");
 
 	imx6_bbu_internal_spi_i2c_register_handler("SPI", "/dev/m25p0.barebox",
-- 
2.19.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2018-11-01 18:26 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-01 18:25 Lucas Stach [this message]
2018-11-01 18:25 ` [PATCH 2/4] ARM: rdu2: configure the USB port as OTG Lucas Stach
2018-11-01 18:25 ` [PATCH 3/4] ARM: rdu2: program e1000 iNVM Lucas Stach
2018-11-01 18:25 ` [PATCH 4/4] ARM: rdu2: fix warnings in Barebox internal DT Lucas Stach
2018-11-02  6:35 ` [PATCH 1/4] ARM: rdu2: config PMIC SW1AB and SW1C rails to 1.375 Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181101182555.18561-1-l.stach@pengutronix.de \
    --to=l.stach@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox