[PATCH v4 01/11] ARM: pass architecture flag for SMCC also to PBL compilation unit

[PATCH v4 01/11] ARM: pass architecture flag for SMCC also to PBL compilation unit

[Lucas Stach]

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 arch/arm/cpu/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/cpu/Makefile b/arch/arm/cpu/Makefile
index 874d723e2cee..374b7cda4c77 100644
--- a/arch/arm/cpu/Makefile
+++ b/arch/arm/cpu/Makefile
@@ -23,6 +23,7 @@ endif
 obj-$(CONFIG_ARM_PSCI) += psci.o
 obj-pbl-$(CONFIG_ARM_SMCCC) += smccc-call$(S64).o
 AFLAGS_smccc-call$(S64).o :=-Wa,-march=armv$(if $(S64),8,7)-a
+AFLAGS_pbl-smccc-call$(S64).o :=-Wa,-march=armv$(if $(S64),8,7)-a
 obj-$(CONFIG_ARM_SECURE_MONITOR) += sm.o sm_as.o
 AFLAGS_sm_as.o		:=-Wa,-march=armv7-a
 
-- 
2.19.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v4 02/11] ARM: import opcode helpers from Linux kernel

[Lucas Stach]

Those are needed to generate some of the ARM SEC and VIRT
opcodes in a portable way.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Roland Hieber <r.hieber@pengutronix.de>
---
 arch/arm/include/asm/opcodes-virt.h |  39 +++++
 arch/arm/include/asm/opcodes.h      | 231 ++++++++++++++++++++++++++++
 2 files changed, 270 insertions(+)
 create mode 100644 arch/arm/include/asm/opcodes-virt.h
 create mode 100644 arch/arm/include/asm/opcodes.h

diff --git a/arch/arm/include/asm/opcodes-virt.h b/arch/arm/include/asm/opcodes-virt.h
new file mode 100644
index 000000000000..efcfdf92d9d5
--- /dev/null
+++ b/arch/arm/include/asm/opcodes-virt.h
@@ -0,0 +1,39 @@
+/*
+ * opcodes-virt.h: Opcode definitions for the ARM virtualization extensions
+ * Copyright (C) 2012  Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __ASM_ARM_OPCODES_VIRT_H
+#define __ASM_ARM_OPCODES_VIRT_H
+
+#include <asm/opcodes.h>
+
+#define __HVC(imm16) __inst_arm_thumb32(				\
+	0xE1400070 | (((imm16) & 0xFFF0) << 4) | ((imm16) & 0x000F),	\
+	0xF7E08000 | (((imm16) & 0xF000) << 4) | ((imm16) & 0x0FFF)	\
+)
+
+#define __ERET	__inst_arm_thumb32(					\
+	0xE160006E,							\
+	0xF3DE8F00							\
+)
+
+#define __MSR_ELR_HYP(regnum)	__inst_arm_thumb32(			\
+	0xE12EF300 | regnum,						\
+	0xF3808E30 | (regnum << 16)					\
+)
+
+#endif /* ! __ASM_ARM_OPCODES_VIRT_H */
diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h
new file mode 100644
index 000000000000..a78bf5d2c518
--- /dev/null
+++ b/arch/arm/include/asm/opcodes.h
@@ -0,0 +1,231 @@
+/*
+ *  arch/arm/include/asm/opcodes.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_OPCODES_H
+#define __ASM_ARM_OPCODES_H
+
+#ifndef __ASSEMBLY__
+#include <linux/linkage.h>
+extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr);
+#endif
+
+#define ARM_OPCODE_CONDTEST_FAIL   0
+#define ARM_OPCODE_CONDTEST_PASS   1
+#define ARM_OPCODE_CONDTEST_UNCOND 2
+
+
+/*
+ * Assembler opcode byteswap helpers.
+ * These are only intended for use by this header: don't use them directly,
+ * because they will be suboptimal in most cases.
+ */
+#define ___asm_opcode_swab32(x) (	\
+	  (((x) << 24) & 0xFF000000)	\
+	| (((x) <<  8) & 0x00FF0000)	\
+	| (((x) >>  8) & 0x0000FF00)	\
+	| (((x) >> 24) & 0x000000FF)	\
+)
+#define ___asm_opcode_swab16(x) (	\
+	  (((x) << 8) & 0xFF00)		\
+	| (((x) >> 8) & 0x00FF)		\
+)
+#define ___asm_opcode_swahb32(x) (	\
+	  (((x) << 8) & 0xFF00FF00)	\
+	| (((x) >> 8) & 0x00FF00FF)	\
+)
+#define ___asm_opcode_swahw32(x) (	\
+	  (((x) << 16) & 0xFFFF0000)	\
+	| (((x) >> 16) & 0x0000FFFF)	\
+)
+#define ___asm_opcode_identity32(x) ((x) & 0xFFFFFFFF)
+#define ___asm_opcode_identity16(x) ((x) & 0xFFFF)
+
+
+/*
+ * Opcode byteswap helpers
+ *
+ * These macros help with converting instructions between a canonical integer
+ * format and in-memory representation, in an endianness-agnostic manner.
+ *
+ * __mem_to_opcode_*() convert from in-memory representation to canonical form.
+ * __opcode_to_mem_*() convert from canonical form to in-memory representation.
+ *
+ *
+ * Canonical instruction representation:
+ *
+ *	ARM:		0xKKLLMMNN
+ *	Thumb 16-bit:	0x0000KKLL, where KK < 0xE8
+ *	Thumb 32-bit:	0xKKLLMMNN, where KK >= 0xE8
+ *
+ * There is no way to distinguish an ARM instruction in canonical representation
+ * from a Thumb instruction (just as these cannot be distinguished in memory).
+ * Where this distinction is important, it needs to be tracked separately.
+ *
+ * Note that values in the range 0x0000E800..0xE7FFFFFF intentionally do not
+ * represent any valid Thumb-2 instruction.  For this range,
+ * __opcode_is_thumb32() and __opcode_is_thumb16() will both be false.
+ *
+ * The ___asm variants are intended only for use by this header, in situations
+ * involving inline assembler.  For .S files, the normal __opcode_*() macros
+ * should do the right thing.
+ */
+#ifdef __ASSEMBLY__
+
+#define ___opcode_swab32(x) ___asm_opcode_swab32(x)
+#define ___opcode_swab16(x) ___asm_opcode_swab16(x)
+#define ___opcode_swahb32(x) ___asm_opcode_swahb32(x)
+#define ___opcode_swahw32(x) ___asm_opcode_swahw32(x)
+#define ___opcode_identity32(x) ___asm_opcode_identity32(x)
+#define ___opcode_identity16(x) ___asm_opcode_identity16(x)
+
+#else /* ! __ASSEMBLY__ */
+
+#include <linux/types.h>
+#include <linux/swab.h>
+
+#define ___opcode_swab32(x) swab32(x)
+#define ___opcode_swab16(x) swab16(x)
+#define ___opcode_swahb32(x) swahb32(x)
+#define ___opcode_swahw32(x) swahw32(x)
+#define ___opcode_identity32(x) ((u32)(x))
+#define ___opcode_identity16(x) ((u16)(x))
+
+#endif /* ! __ASSEMBLY__ */
+
+
+#ifdef CONFIG_CPU_ENDIAN_BE8
+
+#define __opcode_to_mem_arm(x) ___opcode_swab32(x)
+#define __opcode_to_mem_thumb16(x) ___opcode_swab16(x)
+#define __opcode_to_mem_thumb32(x) ___opcode_swahb32(x)
+#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_swab32(x)
+#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_swab16(x)
+#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahb32(x)
+
+#else /* ! CONFIG_CPU_ENDIAN_BE8 */
+
+#define __opcode_to_mem_arm(x) ___opcode_identity32(x)
+#define __opcode_to_mem_thumb16(x) ___opcode_identity16(x)
+#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_identity32(x)
+#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_identity16(x)
+#ifndef CONFIG_CPU_ENDIAN_BE32
+/*
+ * On BE32 systems, using 32-bit accesses to store Thumb instructions will not
+ * work in all cases, due to alignment constraints.  For now, a correct
+ * version is not provided for BE32.
+ */
+#define __opcode_to_mem_thumb32(x) ___opcode_swahw32(x)
+#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahw32(x)
+#endif
+
+#endif /* ! CONFIG_CPU_ENDIAN_BE8 */
+
+#define __mem_to_opcode_arm(x) __opcode_to_mem_arm(x)
+#define __mem_to_opcode_thumb16(x) __opcode_to_mem_thumb16(x)
+#ifndef CONFIG_CPU_ENDIAN_BE32
+#define __mem_to_opcode_thumb32(x) __opcode_to_mem_thumb32(x)
+#endif
+
+/* Operations specific to Thumb opcodes */
+
+/* Instruction size checks: */
+#define __opcode_is_thumb32(x) (		\
+	   ((x) & 0xF8000000) == 0xE8000000	\
+	|| ((x) & 0xF0000000) == 0xF0000000	\
+)
+#define __opcode_is_thumb16(x) (					\
+	   ((x) & 0xFFFF0000) == 0					\
+	&& !(((x) & 0xF800) == 0xE800 || ((x) & 0xF000) == 0xF000)	\
+)
+
+/* Operations to construct or split 32-bit Thumb instructions: */
+#define __opcode_thumb32_first(x) (___opcode_identity16((x) >> 16))
+#define __opcode_thumb32_second(x) (___opcode_identity16(x))
+#define __opcode_thumb32_compose(first, second) (			\
+	  (___opcode_identity32(___opcode_identity16(first)) << 16)	\
+	| ___opcode_identity32(___opcode_identity16(second))		\
+)
+#define ___asm_opcode_thumb32_first(x) (___asm_opcode_identity16((x) >> 16))
+#define ___asm_opcode_thumb32_second(x) (___asm_opcode_identity16(x))
+#define ___asm_opcode_thumb32_compose(first, second) (			    \
+	  (___asm_opcode_identity32(___asm_opcode_identity16(first)) << 16) \
+	| ___asm_opcode_identity32(___asm_opcode_identity16(second))	    \
+)
+
+/*
+ * Opcode injection helpers
+ *
+ * In rare cases it is necessary to assemble an opcode which the
+ * assembler does not support directly, or which would normally be
+ * rejected because of the CFLAGS or AFLAGS used to build the affected
+ * file.
+ *
+ * Before using these macros, consider carefully whether it is feasible
+ * instead to change the build flags for your file, or whether it really
+ * makes sense to support old assembler versions when building that
+ * particular kernel feature.
+ *
+ * The macros defined here should only be used where there is no viable
+ * alternative.
+ *
+ *
+ * __inst_arm(x): emit the specified ARM opcode
+ * __inst_thumb16(x): emit the specified 16-bit Thumb opcode
+ * __inst_thumb32(x): emit the specified 32-bit Thumb opcode
+ *
+ * __inst_arm_thumb16(arm, thumb): emit either the specified arm or
+ *	16-bit Thumb opcode, depending on whether an ARM or Thumb-2
+ *	kernel is being built
+ *
+ * __inst_arm_thumb32(arm, thumb): emit either the specified arm or
+ *	32-bit Thumb opcode, depending on whether an ARM or Thumb-2
+ *	kernel is being built
+ *
+ *
+ * Note that using these macros directly is poor practice.  Instead, you
+ * should use them to define human-readable wrapper macros to encode the
+ * instructions that you care about.  In code which might run on ARMv7 or
+ * above, you can usually use the __inst_arm_thumb{16,32} macros to
+ * specify the ARM and Thumb alternatives at the same time.  This ensures
+ * that the correct opcode gets emitted depending on the instruction set
+ * used for the kernel build.
+ *
+ * Look at opcodes-virt.h for an example of how to use these macros.
+ */
+#include <linux/stringify.h>
+
+#define __inst_arm(x) ___inst_arm(___asm_opcode_to_mem_arm(x))
+#define __inst_thumb32(x) ___inst_thumb32(				\
+	___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_first(x)),	\
+	___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_second(x))	\
+)
+#define __inst_thumb16(x) ___inst_thumb16(___asm_opcode_to_mem_thumb16(x))
+
+#ifdef CONFIG_THUMB2_BAREBOX
+#define __inst_arm_thumb16(arm_opcode, thumb_opcode) \
+	__inst_thumb16(thumb_opcode)
+#define __inst_arm_thumb32(arm_opcode, thumb_opcode) \
+	__inst_thumb32(thumb_opcode)
+#else
+#define __inst_arm_thumb16(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
+#define __inst_arm_thumb32(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
+#endif
+
+/* Helpers for the helpers.  Don't use these directly. */
+#ifdef __ASSEMBLY__
+#define ___inst_arm(x) .long x
+#define ___inst_thumb16(x) .short x
+#define ___inst_thumb32(first, second) .short first, second
+#else
+#define ___inst_arm(x) ".long " __stringify(x) "\n\t"
+#define ___inst_thumb16(x) ".short " __stringify(x) "\n\t"
+#define ___inst_thumb32(first, second) \
+	".short " __stringify(first) ", " __stringify(second) "\n\t"
+#endif
+
+#endif /* __ASM_ARM_OPCODES_H */
-- 
2.19.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v4 03/11] ARM: safely switch from HYP to SVC mode if required

[Lucas Stach]

This is a port of the Linux safe_svcmode_maskall macro to
the Barebox lowlevel init.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Roland Hieber <r.hieber@pengutronix.de>
---
v3: fix whitespace
---
 arch/arm/cpu/lowlevel.S       | 18 +++++++++++++++---
 arch/arm/include/asm/system.h | 26 ++++++++++++++++++++++++++
 2 files changed, 41 insertions(+), 3 deletions(-)

diff --git a/arch/arm/cpu/lowlevel.S b/arch/arm/cpu/lowlevel.S
index 7696a198e764..43665981e48b 100644
--- a/arch/arm/cpu/lowlevel.S
+++ b/arch/arm/cpu/lowlevel.S
@@ -1,16 +1,28 @@
 #include <linux/linkage.h>
 #include <init.h>
 #include <asm/system.h>
+#include <asm/opcodes-virt.h>
 
 .section ".text_bare_init_","ax"
 ENTRY(arm_cpu_lowlevel_init)
 	/* save lr, since it may be banked away with a processor mode change */
 	mov	r2, lr
+
 	/* set the cpu to SVC32 mode, mask irq and fiq */
 	mrs	r12, cpsr
-	bic	r12, r12, #0x1f
-	orr	r12, r12, #0xd3
-	msr	cpsr, r12
+	eor	r12, r12, #HYP_MODE
+	tst	r12, #MODE_MASK
+	bic	r12, r12, #MODE_MASK
+	orr	r12, r12, #(PSR_I_BIT | PSR_F_BIT | SVC_MODE)
+THUMB(	orr	r12, r12, #PSR_T_BIT	)
+	bne	1f
+	orr	r12, r12, #PSR_A_BIT
+	adr	lr, 2f
+	msr	spsr_cxsf, r12
+	__MSR_ELR_HYP(14)
+	__ERET
+1:	msr	cpsr_c, r12
+2:
 
 #if __LINUX_ARM_ARCH__ >= 6
 	/*
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 5cf828ea36cb..48242ab473f4 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -60,6 +60,32 @@
 #define CR_AFE  (1 << 29)	/* Access flag enable			*/
 #define CR_TE   (1 << 30)	/* Thumb exception enable		*/
 
+/*
+ * PSR bits
+ */
+#define USR_MODE	0x00000010
+#define FIQ_MODE	0x00000011
+#define IRQ_MODE	0x00000012
+#define SVC_MODE	0x00000013
+#define ABT_MODE	0x00000017
+#define HYP_MODE	0x0000001a
+#define UND_MODE	0x0000001b
+#define SYSTEM_MODE	0x0000001f
+#define MODE32_BIT	0x00000010
+#define MODE_MASK	0x0000001f
+
+#define PSR_T_BIT	0x00000020
+#define PSR_F_BIT	0x00000040
+#define PSR_I_BIT	0x00000080
+#define PSR_A_BIT	0x00000100
+#define PSR_E_BIT	0x00000200
+#define PSR_J_BIT	0x01000000
+#define PSR_Q_BIT	0x08000000
+#define PSR_V_BIT	0x10000000
+#define PSR_C_BIT	0x20000000
+#define PSR_Z_BIT	0x40000000
+#define PSR_N_BIT	0x80000000
+
 #ifndef __ASSEMBLY__
 #if __LINUX_ARM_ARCH__ >= 7
 static inline unsigned int current_el(void)
-- 
2.19.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v4 04/11] ARM: allow secure monitor code to be built without PSCI

[Lucas Stach]

The hyp mode handling added in the secure monitor code is also useful
when Barebox doesn't have PSCI control. Allow to build without PSCI.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Roland Hieber <r.hieber@pengutronix.de>
---
 arch/arm/cpu/sm_as.S | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/cpu/sm_as.S b/arch/arm/cpu/sm_as.S
index 09580e75de5f..0d01e1bf2435 100644
--- a/arch/arm/cpu/sm_as.S
+++ b/arch/arm/cpu/sm_as.S
@@ -129,7 +129,9 @@ secure_monitor:
 	sub	sp, sp, #4*4			@ allocate result structure on stack
 	mov	r12, sp
 	push	{r4-r6, r12}
+#ifdef CONFIG_ARM_PSCI
 	bl	psci_entry
+#endif
 	pop	{r4-r6, r12}
 	ldm	r12, {r0-r3}
 	add	sp, sp, #4*4
@@ -163,6 +165,8 @@ ENTRY(psci_cpu_entry)
 	mcr	p15, 0, r0, c1, c0, 1	@ ACTLR
 
 	bl	secure_monitor_stack_setup
+#ifdef CONFIG_ARM_PSCI
 	bl	psci_cpu_entry_c
+#endif
 
 ENDPROC(psci_cpu_entry)
-- 
2.19.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v4 05/11] ARM: add file for HYP mode related setup

[Lucas Stach]

This adds routines to add hyp mode vectors and switch back to HYP
mode from SVC. This is needed in both the PBL and Barebox proper.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Roland Hieber <r.hieber@pengutronix.de>
---
v3:
- fix whitespace
- use __BARE_INIT
---
 arch/arm/cpu/Makefile         |   3 +
 arch/arm/cpu/hyp.S            | 116 ++++++++++++++++++++++++++++++++++
 arch/arm/cpu/sm_as.S          |  11 ----
 arch/arm/include/asm/secure.h |   3 +
 4 files changed, 122 insertions(+), 11 deletions(-)
 create mode 100644 arch/arm/cpu/hyp.S

diff --git a/arch/arm/cpu/Makefile b/arch/arm/cpu/Makefile
index 374b7cda4c77..45de2728d01a 100644
--- a/arch/arm/cpu/Makefile
+++ b/arch/arm/cpu/Makefile
@@ -4,6 +4,9 @@ obj-$(CONFIG_ARM_EXCEPTIONS) += exceptions$(S64).o interrupts$(S64).o
 obj-$(CONFIG_MMU) += mmu$(S64).o
 lwl-y += lowlevel$(S64).o
 obj-pbl-$(CONFIG_MMU) += mmu-early$(S64).o
+obj-pbl-y += hyp.o
+AFLAGS_hyp.o :=-Wa,-march=armv7-a -Wa,-mcpu=all
+AFLAGS_pbl-hyp.o :=-Wa,-march=armv7-a -Wa,-mcpu=all
 
 obj-y += start.o entry.o
 
diff --git a/arch/arm/cpu/hyp.S b/arch/arm/cpu/hyp.S
new file mode 100644
index 000000000000..1314b56eab25
--- /dev/null
+++ b/arch/arm/cpu/hyp.S
@@ -0,0 +1,116 @@
+#include <linux/linkage.h>
+#include <asm/system.h>
+#include <asm/opcodes-virt.h>
+#include <init.h>
+
+.arch_extension sec
+.arch_extension virt
+
+__BARE_INIT
+
+.data
+	.align  2
+ENTRY(__boot_cpu_mode)
+	.long   0
+.text
+
+ENTRY(__hyp_install)
+	mrs	r12, cpsr
+	and	r12, r12, #MODE_MASK
+
+	@ Save the initial CPU state
+	adr	r0, .L__boot_cpu_mode_offset
+	ldr	r1, [r0]
+	str	r12, [r0, r1]
+
+	cmp	r12, #HYP_MODE
+	movne	pc, lr			@ give up if the CPU is not in HYP mode
+
+	@ Now install the hypervisor stub:
+	adr	r12, __hyp_vectors
+	mcr	p15, 4, r12, c12, c0, 0	@ set hypervisor vector base (HVBAR)
+
+	@ Disable all traps, so we don't get any nasty surprise
+	mov	r12, #0
+	mcr	p15, 4, r12, c1, c1, 0	@ HCR
+	mcr	p15, 4, r12, c1, c1, 2	@ HCPTR
+	mcr	p15, 4, r12, c1, c1, 3	@ HSTR
+
+THUMB(	orr	r12, #(1 << 30)	)	@ HSCTLR.TE
+	mcr	p15, 4, r12, c1, c0, 0	@ HSCTLR
+
+	mrc	p15, 4, r12, c1, c1, 1	@ HDCR
+	and	r12, #0x1f		@ Preserve HPMN
+	mcr	p15, 4, r12, c1, c1, 1	@ HDCR
+
+	@ Make sure NS-SVC is initialised appropriately
+	mrc	p15, 0, r12, c1, c0, 0	@ SCTLR
+	orr	r12, #(1 << 5)		@ CP15 barriers enabled
+	bic	r12, #(3 << 7)		@ Clear SED/ITD for v8 (RES0 for v7)
+	bic	r12, #(3 << 19)		@ WXN and UWXN disabled
+	mcr	p15, 0, r12, c1, c0, 0	@ SCTLR
+
+	mrc	p15, 0, r12, c0, c0, 0	@ MIDR
+	mcr	p15, 4, r12, c0, c0, 0	@ VPIDR
+
+	mrc	p15, 0, r12, c0, c0, 5	@ MPIDR
+	mcr	p15, 4, r12, c0, c0, 5	@ VMPIDR
+	bx	lr
+ENDPROC(__hyp_install)
+
+ENTRY(armv7_hyp_install)
+	mov	r2, lr
+
+	bl	__hyp_install
+
+	/* set the cpu to SVC32 mode, mask irq and fiq */
+	mrs	r12, cpsr
+	eor	r12, r12, #HYP_MODE
+	tst	r12, #MODE_MASK
+	bic	r12, r12, #MODE_MASK
+	orr	r12, r12, #(PSR_I_BIT | PSR_F_BIT | SVC_MODE)
+THUMB(	orr	r12, r12, #PSR_T_BIT	)
+	bne	1f
+	orr	r12, r12, #PSR_A_BIT
+	adr	lr, 2f
+	msr	spsr_cxsf, r12
+	__MSR_ELR_HYP(14)
+	__ERET
+1:	msr	cpsr_c, r12
+2:
+	mov	pc, r2
+ENDPROC(armv7_hyp_install)
+
+ENTRY(armv7_switch_to_hyp)
+	mov	r0, lr
+	mov	r1, sp		@ save SVC copy of LR and SP
+	isb
+	hvc #0			@ for older asm: .byte 0x70, 0x00, 0x40, 0xe1
+	mov	sp, r1
+	mov	lr, r0		@ restore SVC copy of LR and SP
+
+	bx	lr
+ENDPROC(armv7_switch_to_hyp)
+
+.align 2
+.L__boot_cpu_mode_offset:
+	.long	__boot_cpu_mode - .
+
+/* The HYP trap is crafted to match armv7_switch_to_hyp() */
+__hyp_do_trap:
+	mov lr, r0
+	mov sp, r1
+	bx  lr
+ENDPROC(__hyp_do_trap)
+
+.align 5
+__hyp_vectors:
+__hyp_reset:	W(b)	.
+__hyp_und:	W(b)	.
+__hyp_svc:	W(b)	.
+__hyp_pabort:	W(b)	.
+__hyp_dabort:	W(b)	.
+__hyp_trap:	W(b)	__hyp_do_trap
+__hyp_irq:	W(b)	.
+__hyp_fiq:	W(b)	.
+ENDPROC(__hyp_vectors)
diff --git a/arch/arm/cpu/sm_as.S b/arch/arm/cpu/sm_as.S
index 0d01e1bf2435..de6cd0406f4f 100644
--- a/arch/arm/cpu/sm_as.S
+++ b/arch/arm/cpu/sm_as.S
@@ -148,17 +148,6 @@ hyp_trap:
         mov pc, lr                              @ do no switch modes, but
                                                 @ return to caller
 
-ENTRY(armv7_switch_to_hyp)
-	mov	r0, lr
-	mov	r1, sp		@ save SVC copy of LR and SP
-	isb
-	hvc #0			@ for older asm: .byte 0x70, 0x00, 0x40, 0xe1
-	mov	sp, r1
-	mov	lr, r0		@ restore SVC copy of LR and SP
-
-	bx	lr
-ENDPROC(armv7_switch_to_hyp)
-
 ENTRY(psci_cpu_entry)
 	mrc	p15, 0, r0, c1, c0, 1	@ ACTLR
 	orr	r0, r0, #(1 << 6)	@ Set SMP bit
diff --git a/arch/arm/include/asm/secure.h b/arch/arm/include/asm/secure.h
index a4cb1f6c1c44..663d81ea27dd 100644
--- a/arch/arm/include/asm/secure.h
+++ b/arch/arm/include/asm/secure.h
@@ -5,9 +5,12 @@
 
 int armv7_secure_monitor_install(void);
 int __armv7_secure_monitor_install(void);
+
 void armv7_switch_to_hyp(void);
+void armv7_hyp_install(void);
 
 extern unsigned char secure_monitor_init_vectors[];
+extern int __boot_cpu_mode;
 
 enum arm_security_state {
 	ARM_STATE_SECURE,
-- 
2.19.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v4 06/11] ARM: don't try to install secure monitor when entered in HYP mode

[Lucas Stach]

When Barebox has been entered in HYP mode, the CPU is already switched
to the non-secure world and it's not possible for Barebox to install
it's own secure monitor.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Roland Hieber <r.hieber@pengutronix.de>
---
 arch/arm/cpu/sm.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/cpu/sm.c b/arch/arm/cpu/sm.c
index cb0bac106b5f..1246d8e3a441 100644
--- a/arch/arm/cpu/sm.c
+++ b/arch/arm/cpu/sm.c
@@ -184,6 +184,9 @@ int armv7_secure_monitor_install(void)
 		return -EINVAL;
 	}
 
+	if (__boot_cpu_mode == HYP_MODE)
+		return 0;
+
 	mmuon = get_cr() & CR_M;
 
 	vbar = get_vbar();
-- 
2.19.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v4 07/11] ARM: default to starting kernel in HYP mode when entered in HYP

[Lucas Stach]

When Barebox has been entered in HYP mode, there is a high chance that
the kernel is  intended to be started in HYP mode also. Get this
default into place.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Roland Hieber <r.hieber@pengutronix.de>
---
 arch/arm/cpu/sm.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/cpu/sm.c b/arch/arm/cpu/sm.c
index 1246d8e3a441..6fad30adabc9 100644
--- a/arch/arm/cpu/sm.c
+++ b/arch/arm/cpu/sm.c
@@ -262,6 +262,9 @@ static int sm_init(void)
 				  bootm_secure_state_names,
 				  ARRAY_SIZE(bootm_secure_state_names));
 
+	if (__boot_cpu_mode == HYP_MODE)
+		bootm_secure_state = ARM_STATE_HYP;
+
 	return 0;
 }
 device_initcall(sm_init);
\ No newline at end of file
-- 
2.19.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v4 08/11] ARM: install HYP vectors at PBL and Barebox entry

[Lucas Stach]

If the CPU was already in HYP mode when entering the PBL, install a
simple trap handler to allow to get back from SVC to HYP before
switching to HYP mode.

As the vectors are part of the currently running binary, we need to
do the same setup when starting the real Barebox binary, as the PBL
setup vectors might get overwritten. To do this we trap into HYP mode
just before jumping to Barebox and then re-do the vector setup and
SVC switch as the first thing in Barebox proper.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Roland Hieber <r.hieber@pengutronix.de>
---
 arch/arm/cpu/lowlevel.S   | 3 +++
 arch/arm/cpu/start-pbl.c  | 4 ++++
 arch/arm/cpu/start.c      | 5 +++++
 arch/arm/cpu/uncompress.c | 4 ++++
 4 files changed, 16 insertions(+)

diff --git a/arch/arm/cpu/lowlevel.S b/arch/arm/cpu/lowlevel.S
index 43665981e48b..13dfe496ad17 100644
--- a/arch/arm/cpu/lowlevel.S
+++ b/arch/arm/cpu/lowlevel.S
@@ -8,6 +8,9 @@ ENTRY(arm_cpu_lowlevel_init)
 	/* save lr, since it may be banked away with a processor mode change */
 	mov	r2, lr
 
+	/* careful: the hyp install corrupts r0 and r1 */
+	bl	__hyp_install
+
 	/* set the cpu to SVC32 mode, mask irq and fiq */
 	mrs	r12, cpsr
 	eor	r12, r12, #HYP_MODE
diff --git a/arch/arm/cpu/start-pbl.c b/arch/arm/cpu/start-pbl.c
index 16159d7f9d51..48a808645671 100644
--- a/arch/arm/cpu/start-pbl.c
+++ b/arch/arm/cpu/start-pbl.c
@@ -26,6 +26,7 @@
 #include <asm/barebox-arm-head.h>
 #include <asm-generic/memory_layout.h>
 #include <asm/sections.h>
+#include <asm/secure.h>
 #include <asm/cache.h>
 #include <asm/mmu.h>
 #include <asm/unaligned.h>
@@ -98,5 +99,8 @@ __noreturn void barebox_single_pbl_start(unsigned long membase,
 	else
 		barebox = (void *)barebox_base;
 
+	if (IS_ENABLED(CONFIG_CPU_V7) && __boot_cpu_mode == HYP_MODE)
+		armv7_switch_to_hyp();
+
 	barebox(membase, memsize, boarddata);
 }
diff --git a/arch/arm/cpu/start.c b/arch/arm/cpu/start.c
index 64bd942ad764..a79d64eaa6e6 100644
--- a/arch/arm/cpu/start.c
+++ b/arch/arm/cpu/start.c
@@ -24,6 +24,7 @@
 #include <asm/barebox-arm-head.h>
 #include <asm-generic/memory_layout.h>
 #include <asm/sections.h>
+#include <asm/secure.h>
 #include <asm/unaligned.h>
 #include <asm/cache.h>
 #include <asm/mmu.h>
@@ -147,6 +148,10 @@ __noreturn void barebox_non_pbl_start(unsigned long membase,
 	unsigned long barebox_base = arm_mem_barebox_image(membase,
 							   endmem,
 							   barebox_size);
+
+	if (IS_ENABLED(CONFIG_CPU_V7))
+		armv7_hyp_install();
+
 	if (IS_ENABLED(CONFIG_RELOCATABLE))
 		relocate_to_adr(barebox_base);
 
diff --git a/arch/arm/cpu/uncompress.c b/arch/arm/cpu/uncompress.c
index 43b49b42120b..048bca0c9599 100644
--- a/arch/arm/cpu/uncompress.c
+++ b/arch/arm/cpu/uncompress.c
@@ -27,6 +27,7 @@
 #include <asm/barebox-arm-head.h>
 #include <asm-generic/memory_layout.h>
 #include <asm/sections.h>
+#include <asm/secure.h>
 #include <asm/cache.h>
 #include <asm/mmu.h>
 #include <asm/unaligned.h>
@@ -105,5 +106,8 @@ void __noreturn barebox_multi_pbl_start(unsigned long membase,
 
 	pr_debug("jumping to uncompressed image at 0x%p\n", barebox);
 
+	if (IS_ENABLED(CONFIG_CPU_V7) && __boot_cpu_mode == HYP_MODE)
+		armv7_switch_to_hyp();
+
 	barebox(membase, memsize, boarddata);
 }
-- 
2.19.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v4 09/11] ARM: rpi: add revision IDs for Pi 3 Model B and Pi Zero

[Lucas Stach]

From: Enrico Joerns <ejo@pengutronix.de>

Signed-off-by: Enrico Joerns <ejo@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Roland Hieber <r.hieber@pengutronix.de>
---
 arch/arm/boards/raspberry-pi/rpi-common.c | 2 ++
 arch/arm/mach-bcm283x/include/mach/mbox.h | 4 ++++
 2 files changed, 6 insertions(+)

diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c b/arch/arm/boards/raspberry-pi/rpi-common.c
index 6e375bc984de..aec8cb27ed40 100644
--- a/arch/arm/boards/raspberry-pi/rpi-common.c
+++ b/arch/arm/boards/raspberry-pi/rpi-common.c
@@ -174,6 +174,8 @@ const struct rpi_model rpi_models_old_scheme[] = {
 const struct rpi_model rpi_models_new_scheme[] = {
 	RPI_MODEL(0, "Unknown model", NULL),
 	RPI_MODEL(BCM2836_BOARD_REV_2_B, "2 Model B", rpi_b_plus_init),
+	RPI_MODEL(BCM2837_BOARD_REV_3_B, "3 Model B", rpi_b_plus_init),
+	RPI_MODEL(BCM2837_BOARD_REV_ZERO, "Zero", rpi_b_plus_init),
 };
 
 static int rpi_board_rev = 0;
diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h
index 2b5aea88ee0a..4cddf99a8429 100644
--- a/arch/arm/mach-bcm283x/include/mach/mbox.h
+++ b/arch/arm/mach-bcm283x/include/mach/mbox.h
@@ -129,6 +129,10 @@ struct bcm2835_mbox_tag_hdr {
 
 /* RPi 2 */
 #define BCM2836_BOARD_REV_2_B		0x4
+/* RPi 3 */
+#define BCM2837_BOARD_REV_3_B		0x8
+/* Zero */
+#define BCM2837_BOARD_REV_ZERO		0x9
 
 /*
  * 0x2..0xf from:
-- 
2.19.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v4 10/11] ARM: rpi: add raspberry pi 3 support

[Lucas Stach]

This adds basic support at the same feature level as the other
supported raspberry pi boards.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Roland Hieber <r.hieber@pengutronix.de>
---
 arch/arm/boards/raspberry-pi/lowlevel.c | 14 ++++++++++++--
 arch/arm/configs/rpi_defconfig          |  2 ++
 arch/arm/dts/Makefile                   |  1 +
 arch/arm/dts/bcm2837-rpi-3.dts          | 16 ++++++++++++++++
 arch/arm/mach-bcm283x/Kconfig           |  6 ++++++
 arch/arm/mach-bcm283x/core.c            |  1 +
 images/Makefile.bcm283x                 |  4 ++++
 7 files changed, 42 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/dts/bcm2837-rpi-3.dts

diff --git a/arch/arm/boards/raspberry-pi/lowlevel.c b/arch/arm/boards/raspberry-pi/lowlevel.c
index cbc6caa4b9ed..34c9350920e9 100644
--- a/arch/arm/boards/raspberry-pi/lowlevel.c
+++ b/arch/arm/boards/raspberry-pi/lowlevel.c
@@ -1,7 +1,7 @@
+#include <asm/barebox-arm.h>
+#include <asm/cache.h>
 #include <common.h>
 #include <linux/sizes.h>
-#include <asm/barebox-arm.h>
-#include <asm/barebox-arm-head.h>
 #include <mach/platform.h>
 
 extern char __dtb_bcm2835_rpi_start[];
@@ -23,3 +23,13 @@ ENTRY_FUNCTION(start_raspberry_pi2, r0, r1, r2)
 
 	barebox_arm_entry(BCM2835_SDRAM_BASE, SZ_512M, fdt);
 }
+
+extern char __dtb_bcm2837_rpi_3_start[];
+ENTRY_FUNCTION(start_raspberry_pi3, r0, r1, r2)
+{
+	void *fdt = __dtb_bcm2837_rpi_3_start + get_runtime_offset();
+
+	arm_cpu_lowlevel_init();
+
+	barebox_arm_entry(BCM2835_SDRAM_BASE, SZ_512M, fdt);
+}
diff --git a/arch/arm/configs/rpi_defconfig b/arch/arm/configs/rpi_defconfig
index f3aef4290425..cd88b4ac751c 100644
--- a/arch/arm/configs/rpi_defconfig
+++ b/arch/arm/configs/rpi_defconfig
@@ -1,9 +1,11 @@
 CONFIG_ARCH_BCM283X=y
 CONFIG_MACH_RPI=y
 CONFIG_MACH_RPI2=y
+CONFIG_MACH_RPI3=y
 CONFIG_AEABI=y
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
 CONFIG_ARM_UNWIND=y
+CONFIG_IMAGE_COMPRESSION_NONE=y
 CONFIG_MMU=y
 CONFIG_MALLOC_TLSF=y
 CONFIG_KALLSYMS=y
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 1caeca35b484..4e063902c635 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -71,6 +71,7 @@ pbl-dtb-$(CONFIG_MACH_PHYTEC_SOM_RK3288) += rk3288-phycore-som.dtb.o
 pbl-dtb-$(CONFIG_MACH_REALQ7) += imx6q-dmo-edmqmx6.dtb.o
 pbl-dtb-$(CONFIG_MACH_RPI) += bcm2835-rpi.dtb.o
 pbl-dtb-$(CONFIG_MACH_RPI2) += bcm2836-rpi-2.dtb.o
+pbl-dtb-$(CONFIG_MACH_RPI3) += bcm2837-rpi-3.dtb.o
 pbl-dtb-$(CONFIG_MACH_SABRELITE) += imx6q-sabrelite.dtb.o imx6dl-sabrelite.dtb.o
 pbl-dtb-$(CONFIG_MACH_SABRESD) += imx6q-sabresd.dtb.o
 pbl-dtb-$(CONFIG_MACH_FREESCALE_IMX6SX_SABRESDB) += imx6sx-sdb.dtb.o
diff --git a/arch/arm/dts/bcm2837-rpi-3.dts b/arch/arm/dts/bcm2837-rpi-3.dts
new file mode 100644
index 000000000000..d6ffc369122c
--- /dev/null
+++ b/arch/arm/dts/bcm2837-rpi-3.dts
@@ -0,0 +1,16 @@
+#include <arm64/broadcom/bcm2837-rpi-3-b.dts>
+
+/ {
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory {
+		reg = <0x0 0x0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+	/delete-node/ bluetooth;
+};
diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig
index 1457f114ccaa..af2f88c47acb 100644
--- a/arch/arm/mach-bcm283x/Kconfig
+++ b/arch/arm/mach-bcm283x/Kconfig
@@ -19,6 +19,12 @@ config MACH_RPI2
 	select CPU_V7
 	select MACH_RPI_COMMON
 
+config MACH_RPI3
+	bool "RaspberryPi 3 (BCM2837/CORTEX-A53)"
+	select CPU_V7
+	select MACH_RPI_COMMON
+	select ARM_SECURE_MONITOR
+
 endmenu
 
 config MACH_RPI_DEBUG_UART_BASE
diff --git a/arch/arm/mach-bcm283x/core.c b/arch/arm/mach-bcm283x/core.c
index fddcb0d1a1d4..26f0996b1cb8 100644
--- a/arch/arm/mach-bcm283x/core.c
+++ b/arch/arm/mach-bcm283x/core.c
@@ -41,6 +41,7 @@ static int bcm2835_clk_init(void)
 	clk = clk_fixed("uart0-pl0110", 3 * 1000 * 1000);
 	clk_register_clkdev(clk, NULL, "uart0-pl0110");
 	clk_register_clkdev(clk, NULL, "20201000.serial");
+	clk_register_clkdev(clk, NULL, "3f201000.serial");
 
 	clk = clk_fixed("bcm2835-cs", 1 * 1000 * 1000);
 	clk_register_clkdev(clk, NULL, "bcm2835-cs");
diff --git a/images/Makefile.bcm283x b/images/Makefile.bcm283x
index d59ef043f05c..d14e648926ac 100644
--- a/images/Makefile.bcm283x
+++ b/images/Makefile.bcm283x
@@ -9,3 +9,7 @@ image-$(CONFIG_MACH_RPI) += barebox-raspberry-pi-1.img
 pblx-$(CONFIG_MACH_RPI2) += start_raspberry_pi2
 FILE_barebox-raspberry-pi-2.img = start_raspberry_pi2.pblx
 image-$(CONFIG_MACH_RPI2) += barebox-raspberry-pi-2.img
+
+pblx-$(CONFIG_MACH_RPI3) += start_raspberry_pi3
+FILE_barebox-raspberry-pi-3.img = start_raspberry_pi3.pblx
+image-$(CONFIG_MACH_RPI3) += barebox-raspberry-pi-3.img
\ No newline at end of file
-- 
2.19.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v4 11/11] ARM: rpi: autosize malloc area

[Lucas Stach]

Autosize the malloc area according to the available RAM size.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Roland Hieber <r.hieber@pengutronix.de>
---
 arch/arm/configs/rpi_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/rpi_defconfig b/arch/arm/configs/rpi_defconfig
index cd88b4ac751c..2bb615849324 100644
--- a/arch/arm/configs/rpi_defconfig
+++ b/arch/arm/configs/rpi_defconfig
@@ -7,6 +7,7 @@ CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
 CONFIG_ARM_UNWIND=y
 CONFIG_IMAGE_COMPRESSION_NONE=y
 CONFIG_MMU=y
+CONFIG_MALLOC_SIZE=0x0
 CONFIG_MALLOC_TLSF=y
 CONFIG_KALLSYMS=y
 CONFIG_PROMPT="R-Pi> "
-- 
2.19.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH v4 09/11] ARM: rpi: add revision IDs for Pi 3 Model B and Pi Zero

[Lucas Stach]

Am Donnerstag, den 01.11.2018, 10:18 +0100 schrieb Lucas Stach:
> > From: Enrico Joerns <ejo@pengutronix.de>
> 
> > Signed-off-by: Enrico Joerns <ejo@pengutronix.de>
> > Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> > Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> ---
>  arch/arm/boards/raspberry-pi/rpi-common.c | 2 ++
>  arch/arm/mach-bcm283x/include/mach/mbox.h | 4 ++++
>  2 files changed, 6 insertions(+)
> 
> diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c b/arch/arm/boards/raspberry-pi/rpi-common.c
> index 6e375bc984de..aec8cb27ed40 100644
> --- a/arch/arm/boards/raspberry-pi/rpi-common.c
> +++ b/arch/arm/boards/raspberry-pi/rpi-common.c
> @@ -174,6 +174,8 @@ const struct rpi_model rpi_models_old_scheme[] = {
>  const struct rpi_model rpi_models_new_scheme[] = {
> >  	RPI_MODEL(0, "Unknown model", NULL),
> >  	RPI_MODEL(BCM2836_BOARD_REV_2_B, "2 Model B", rpi_b_plus_init),
> > +	RPI_MODEL(BCM2837_BOARD_REV_3_B, "3 Model B", rpi_b_plus_init),
> > +	RPI_MODEL(BCM2837_BOARD_REV_ZERO, "Zero", rpi_b_plus_init),
>  };
>  
>  static int rpi_board_rev = 0;
> diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h
> index 2b5aea88ee0a..4cddf99a8429 100644
> --- a/arch/arm/mach-bcm283x/include/mach/mbox.h
> +++ b/arch/arm/mach-bcm283x/include/mach/mbox.h
> @@ -129,6 +129,10 @@ struct bcm2835_mbox_tag_hdr {
>  
>  /* RPi 2 */
> >  #define BCM2836_BOARD_REV_2_B		0x4
> +/* RPi 3 */
> > +#define BCM2837_BOARD_REV_3_B		0x8
> +/* Zero */
> > +#define BCM2837_BOARD_REV_ZERO		0x9

Robert noted that the Zero is actually a BCM2835 SoC. Sascha, can you
fix up the define name while applying?

Regards,
Lucas

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH v4 09/11] ARM: rpi: add revision IDs for Pi 3 Model B and Pi Zero

[Sascha Hauer]

On Thu, Nov 01, 2018 at 07:35:25PM +0100, Lucas Stach wrote:
> Am Donnerstag, den 01.11.2018, 10:18 +0100 schrieb Lucas Stach:
> > > From: Enrico Joerns <ejo@pengutronix.de>
> > 
> > > Signed-off-by: Enrico Joerns <ejo@pengutronix.de>
> > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> > > Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> > ---
> >  arch/arm/boards/raspberry-pi/rpi-common.c | 2 ++
> >  arch/arm/mach-bcm283x/include/mach/mbox.h | 4 ++++
> >  2 files changed, 6 insertions(+)
> > 
> > diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c b/arch/arm/boards/raspberry-pi/rpi-common.c
> > index 6e375bc984de..aec8cb27ed40 100644
> > --- a/arch/arm/boards/raspberry-pi/rpi-common.c
> > +++ b/arch/arm/boards/raspberry-pi/rpi-common.c
> > @@ -174,6 +174,8 @@ const struct rpi_model rpi_models_old_scheme[] = {
> >  const struct rpi_model rpi_models_new_scheme[] = {
> > >  	RPI_MODEL(0, "Unknown model", NULL),
> > >  	RPI_MODEL(BCM2836_BOARD_REV_2_B, "2 Model B", rpi_b_plus_init),
> > > +	RPI_MODEL(BCM2837_BOARD_REV_3_B, "3 Model B", rpi_b_plus_init),
> > > +	RPI_MODEL(BCM2837_BOARD_REV_ZERO, "Zero", rpi_b_plus_init),
> >  };
> >  
> >  static int rpi_board_rev = 0;
> > diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h
> > index 2b5aea88ee0a..4cddf99a8429 100644
> > --- a/arch/arm/mach-bcm283x/include/mach/mbox.h
> > +++ b/arch/arm/mach-bcm283x/include/mach/mbox.h
> > @@ -129,6 +129,10 @@ struct bcm2835_mbox_tag_hdr {
> >  
> >  /* RPi 2 */
> > >  #define BCM2836_BOARD_REV_2_B		0x4
> > +/* RPi 3 */
> > > +#define BCM2837_BOARD_REV_3_B		0x8
> > +/* Zero */
> > > +#define BCM2837_BOARD_REV_ZERO		0x9
> 
> Robert noted that the Zero is actually a BCM2835 SoC. Sascha, can you
> fix up the define name while applying?

Did that and applied. /me is compile testing.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH v4 04/11] ARM: allow secure monitor code to be built without PSCI

[Sam Ravnborg]

Hi Lucas.

On Thu, Nov 01, 2018 at 10:18:39AM +0100, Lucas Stach wrote:
> The hyp mode handling added in the secure monitor code is also useful
> when Barebox doesn't have PSCI control. Allow to build without PSCI.
> 
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> ---
>  arch/arm/cpu/sm_as.S | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/cpu/sm_as.S b/arch/arm/cpu/sm_as.S
> index 09580e75de5f..0d01e1bf2435 100644
> --- a/arch/arm/cpu/sm_as.S
> +++ b/arch/arm/cpu/sm_as.S
> @@ -129,7 +129,9 @@ secure_monitor:
>  	sub	sp, sp, #4*4			@ allocate result structure on stack
>  	mov	r12, sp
>  	push	{r4-r6, r12}
> +#ifdef CONFIG_ARM_PSCI
>  	bl	psci_entry
> +#endif
>  	pop	{r4-r6, r12}
>  	ldm	r12, {r0-r3}
>  	add	sp, sp, #4*4
> @@ -163,6 +165,8 @@ ENTRY(psci_cpu_entry)
>  	mcr	p15, 0, r0, c1, c0, 1	@ ACTLR
>  
>  	bl	secure_monitor_stack_setup
> +#ifdef CONFIG_ARM_PSCI
>  	bl	psci_cpu_entry_c
> +#endif

It looks strange to have two consecutive

	bl  something
	bl  something_else

In the above (when CONFIG_ARM_PSCI is defined).
Seems that we will never hit the second branch long instruction.

But maybe I am just clueless on the assembly syntax?

	Sam

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH v4 04/11] ARM: allow secure monitor code to be built without PSCI

[Andrey Smirnov]

On Fri, Nov 2, 2018 at 3:29 PM Sam Ravnborg <sam@ravnborg.org> wrote:
>
> Hi Lucas.
>
> On Thu, Nov 01, 2018 at 10:18:39AM +0100, Lucas Stach wrote:
> > The hyp mode handling added in the secure monitor code is also useful
> > when Barebox doesn't have PSCI control. Allow to build without PSCI.
> >
> > Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> > Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> > ---
> >  arch/arm/cpu/sm_as.S | 4 ++++
> >  1 file changed, 4 insertions(+)
> >
> > diff --git a/arch/arm/cpu/sm_as.S b/arch/arm/cpu/sm_as.S
> > index 09580e75de5f..0d01e1bf2435 100644
> > --- a/arch/arm/cpu/sm_as.S
> > +++ b/arch/arm/cpu/sm_as.S
> > @@ -129,7 +129,9 @@ secure_monitor:
> >       sub     sp, sp, #4*4                    @ allocate result structure on stack
> >       mov     r12, sp
> >       push    {r4-r6, r12}
> > +#ifdef CONFIG_ARM_PSCI
> >       bl      psci_entry
> > +#endif
> >       pop     {r4-r6, r12}
> >       ldm     r12, {r0-r3}
> >       add     sp, sp, #4*4
> > @@ -163,6 +165,8 @@ ENTRY(psci_cpu_entry)
> >       mcr     p15, 0, r0, c1, c0, 1   @ ACTLR
> >
> >       bl      secure_monitor_stack_setup
> > +#ifdef CONFIG_ARM_PSCI
> >       bl      psci_cpu_entry_c
> > +#endif
>
> It looks strange to have two consecutive
>
>         bl  something
>         bl  something_else
>
> In the above (when CONFIG_ARM_PSCI is defined).
> Seems that we will never hit the second branch long instruction.
>
> But maybe I am just clueless on the assembly syntax?
>

That just a regular call, "bl" means "branch and store return address
in link register", if you look at the source of of
"secure_monitor_stack_setup" its last instruction is "bx lr" which is
"branch to address stored in link register" (potentially switching
from/to Thumb, if I remember the meaning of "x" at the end correctly).

Thanks,
Andrey Smirnov

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH v4 04/11] ARM: allow secure monitor code to be built without PSCI

[Sam Ravnborg]

Hi Andrey.

> >
> >         bl  something
> >         bl  something_else
> >
> > In the above (when CONFIG_ARM_PSCI is defined).
> > Seems that we will never hit the second branch long instruction.
> >
> > But maybe I am just clueless on the assembly syntax?
> >
> 
> That just a regular call, "bl" means "branch and store return address
> in link register", if you look at the source of of
> "secure_monitor_stack_setup" its last instruction is "bx lr" which is
> "branch to address stored in link register" (potentially switching
> from/to Thumb, if I remember the meaning of "x" at the end correctly).

Thanks. I am now a tiny little less clueless on ARM assembler :-)

	Sam

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox