From: Michael Tretter <m.tretter@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Michael Tretter <m.tretter@pengutronix.de>
Subject: [PATCH 3/3] ARM: zynqmp: add support for Xilinx ZCU104 board
Date: Fri, 23 Nov 2018 14:35:53 +0100 [thread overview]
Message-ID: <20181123133553.24761-4-m.tretter@pengutronix.de> (raw)
In-Reply-To: <20181123133553.24761-1-m.tretter@pengutronix.de>
Add support for the Xilinx Zynq Ultrascale+ MPSoC architecture (ZynqMP)
and the Xilinx ZCU104 board.
Barebox is booted as BL33 in EL-1 and expects that a BL2 (i.e. the FSBL)
already took care of initializing the RAM. Also for debug_ll, the UART
is expected to be already setup correctly.
Thus, you have to add the Barebox binary to a boot image as described in
"Chapter 11: Boot and Configuration" of "Zynq Ultrascale+ Device
Technical Reference Manual".
The ENTRY_FUNCTION macro cannot be used in aarch64, because aarch64 does
not specify the __naked__ attribute and gcc add a function prologue to
the entry function which writes to the stack, but the stack is not set
up. Thus, the entry has to be implemented in assembly.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
arch/arm/Kconfig | 14 +++++++
arch/arm/Makefile | 1 +
arch/arm/boards/Makefile | 1 +
arch/arm/boards/xilinx-zcu104/Makefile | 2 +
arch/arm/boards/xilinx-zcu104/board.c | 25 ++++++++++++
arch/arm/boards/xilinx-zcu104/lowlevel.c | 30 +++++++++++++++
arch/arm/boards/xilinx-zcu104/lowlevel_init.S | 32 ++++++++++++++++
arch/arm/configs/zynqmp_defconfig | 38 +++++++++++++++++++
arch/arm/dts/Makefile | 1 +
arch/arm/mach-zynqmp/Kconfig | 9 +++++
arch/arm/mach-zynqmp/Makefile | 1 +
arch/arm/mach-zynqmp/include/mach/debug_ll.h | 30 +++++++++++++++
arch/arm/mach-zynqmp/zynqmp.c | 22 +++++++++++
images/Makefile | 1 +
images/Makefile.zynqmp | 7 ++++
15 files changed, 214 insertions(+)
create mode 100644 arch/arm/boards/xilinx-zcu104/Makefile
create mode 100644 arch/arm/boards/xilinx-zcu104/board.c
create mode 100644 arch/arm/boards/xilinx-zcu104/lowlevel.c
create mode 100644 arch/arm/boards/xilinx-zcu104/lowlevel_init.S
create mode 100644 arch/arm/configs/zynqmp_defconfig
create mode 100644 arch/arm/mach-zynqmp/Kconfig
create mode 100644 arch/arm/mach-zynqmp/Makefile
create mode 100644 arch/arm/mach-zynqmp/include/mach/debug_ll.h
create mode 100644 arch/arm/mach-zynqmp/zynqmp.c
create mode 100644 images/Makefile.zynqmp
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3b486f7b8b..842cbb1485 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -245,6 +245,19 @@ config ARCH_ZYNQ
bool "Xilinx Zynq-based boards"
select HAS_DEBUG_LL
+config ARCH_ZYNQMP
+ bool "Xilinx ZynqMP-based boards"
+ select CPU_V8
+ select HAS_DEBUG_LL
+ select HAVE_PBL_MULTI_IMAGES
+ select COMMON_CLK
+ select COMMON_CLK_OF_PROVIDER
+ select CLKDEV_LOOKUP
+ select OFDEVICE
+ select OFTREE
+ select RELOCATABLE
+ select SYS_SUPPORTS_64BIT_KERNEL
+
config ARCH_QEMU
bool "ARM QEMU boards"
select HAS_DEBUG_LL
@@ -275,6 +288,7 @@ source arch/arm/mach-tegra/Kconfig
source arch/arm/mach-uemd/Kconfig
source arch/arm/mach-zynq/Kconfig
source arch/arm/mach-qemu/Kconfig
+source arch/arm/mach-zynqmp/Kconfig
config ARM_ASM_UNIFIED
bool
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 50958b787f..675d3433cc 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -101,6 +101,7 @@ machine-$(CONFIG_ARCH_VEXPRESS) := vexpress
machine-$(CONFIG_ARCH_TEGRA) := tegra
machine-$(CONFIG_ARCH_UEMD) := uemd
machine-$(CONFIG_ARCH_ZYNQ) := zynq
+machine-$(CONFIG_ARCH_ZYNQMP) := zynqmp
machine-$(CONFIG_ARCH_QEMU) := qemu
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 3bf176b14d..a15a24c02e 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -153,6 +153,7 @@ obj-$(CONFIG_MACH_VSCOM_BALTOS) += vscom-baltos/
obj-$(CONFIG_MACH_QEMU_VIRT64) += qemu-virt64/
obj-$(CONFIG_MACH_WARP7) += element14-warp7/
obj-$(CONFIG_MACH_VF610_TWR) += freescale-vf610-twr/
+obj-$(CONFIG_MACH_XILINX_ZCU104) += xilinx-zcu104/
obj-$(CONFIG_MACH_ZII_RDU1) += zii-imx51-rdu1/
obj-$(CONFIG_MACH_ZII_RDU2) += zii-imx6q-rdu2/
obj-$(CONFIG_MACH_ZII_VF610_DEV) += zii-vf610-dev/
diff --git a/arch/arm/boards/xilinx-zcu104/Makefile b/arch/arm/boards/xilinx-zcu104/Makefile
new file mode 100644
index 0000000000..918615bb76
--- /dev/null
+++ b/arch/arm/boards/xilinx-zcu104/Makefile
@@ -0,0 +1,2 @@
+obj-y += board.o
+lwl-y += lowlevel.o lowlevel_init.o
diff --git a/arch/arm/boards/xilinx-zcu104/board.c b/arch/arm/boards/xilinx-zcu104/board.c
new file mode 100644
index 0000000000..090c366e99
--- /dev/null
+++ b/arch/arm/boards/xilinx-zcu104/board.c
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2018 Michael Tretter <m.tretter@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <common.h>
+#include <init.h>
+
+static int zcu104_console_init(void)
+{
+ barebox_set_model("Xilinx Zynq UltraScale+ MPSoC ZCU104");
+ barebox_set_hostname("zcu104");
+
+ return 0;
+}
+console_initcall(zcu104_console_init);
diff --git a/arch/arm/boards/xilinx-zcu104/lowlevel.c b/arch/arm/boards/xilinx-zcu104/lowlevel.c
new file mode 100644
index 0000000000..94ce8b1af9
--- /dev/null
+++ b/arch/arm/boards/xilinx-zcu104/lowlevel.c
@@ -0,0 +1,30 @@
+/*
+ * (c) 2018 Michael Tretter <m.tretter@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <common.h>
+#include <debug_ll.h>
+#include <asm/barebox-arm.h>
+
+extern char __dtb_zynqmp_zcu104_revA_start[];
+
+void zynqmp_zcu104_start(uint32_t, uint32_t, uint32_t);
+
+void noinline zynqmp_zcu104_start(uint32_t r0, uint32_t r1, uint32_t r2)
+{
+ /* Assume that the first stage boot loader configured the UART */
+ putc_ll('>');
+
+ barebox_arm_entry(0, SZ_2G,
+ __dtb_zynqmp_zcu104_revA_start + global_variable_offset());
+}
diff --git a/arch/arm/boards/xilinx-zcu104/lowlevel_init.S b/arch/arm/boards/xilinx-zcu104/lowlevel_init.S
new file mode 100644
index 0000000000..23f0ee99dd
--- /dev/null
+++ b/arch/arm/boards/xilinx-zcu104/lowlevel_init.S
@@ -0,0 +1,32 @@
+#include <linux/linkage.h>
+#include <init.h>
+#include <asm/barebox-arm-head.h>
+#include <asm/system.h>
+
+#define ENTRY_PROC(name) \
+ .section .text_head_entry_##name; \
+ ENTRY(##name); \
+ b 2f; \
+ nop; \
+ nop; \
+ nop; \
+ nop; \
+ nop; \
+ nop; \
+ nop; \
+ .asciz "barebox"; \
+ .word 0xffffffff; \
+ .word _barebox_image_size; \
+ .rept 8; \
+ .word 0x55555555; \
+ .endr; \
+ 2:
+
+#define ENTRY_PROC_END(name) \
+ END(##name)
+
+ENTRY_PROC(start_zynqmp_zcu104)
+ mov x0, #0x7ffffff0
+ mov sp, x0
+ b zynqmp_zcu104_start
+ENTRY_PROC_END(start_zynqmp_zcu104)
diff --git a/arch/arm/configs/zynqmp_defconfig b/arch/arm/configs/zynqmp_defconfig
new file mode 100644
index 0000000000..4dea9647fe
--- /dev/null
+++ b/arch/arm/configs/zynqmp_defconfig
@@ -0,0 +1,38 @@
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_MACH_XILINX_ZCU104=y
+CONFIG_MMU=y
+CONFIG_MALLOC_SIZE=0x0
+CONFIG_MALLOC_TLSF=y
+CONFIG_KALLSYMS=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_BOOTM_SHOW_TYPE=y
+CONFIG_BOOTM_VERBOSE=y
+CONFIG_BOOTM_INITRD=y
+CONFIG_BOOTM_OFTREE=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_LONGHELP=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LN=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIME=y
+CONFIG_DRIVER_SERIAL_CADENCE=y
+# CONFIG_SPI is not set
+CONFIG_DIGEST=y
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 503d9b18f9..0ac3124c8c 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -119,6 +119,7 @@ pbl-dtb-$(CONFIG_MACH_ZII_VF610_DEV) += \
pbl-dtb-$(CONFIG_MACH_AT91SAM9263EK_DT) += at91sam9263ek.dtb.o
pbl-dtb-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += at91-microchip-ksz9477-evb.dtb.o
pbl-dtb-$(CONFIG_MACH_AT91SAM9X5EK) += at91sam9x5ek.dtb.o
+pbl-dtb-$(CONFIG_MACH_XILINX_ZCU104) += zynqmp-zcu104-revA.dtb.o
pbl-dtb-$(CONFIG_MACH_ZII_IMX7D_RPU2) += imx7d-zii-rpu2.dtb.o
diff --git a/arch/arm/mach-zynqmp/Kconfig b/arch/arm/mach-zynqmp/Kconfig
new file mode 100644
index 0000000000..1c7727d66c
--- /dev/null
+++ b/arch/arm/mach-zynqmp/Kconfig
@@ -0,0 +1,9 @@
+if ARCH_ZYNQMP
+
+config MACH_XILINX_ZCU104
+ bool "Xilinx Zynq UltraScale+ MPSoC ZCU104"
+ help
+ Say Y here if you are using the Xilinx Zynq UltraScale+ MPSoC ZCU104
+ evaluation board.
+
+endif
diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
new file mode 100644
index 0000000000..1f4e72abc1
--- /dev/null
+++ b/arch/arm/mach-zynqmp/Makefile
@@ -0,0 +1 @@
+obj-y += zynqmp.o
diff --git a/arch/arm/mach-zynqmp/include/mach/debug_ll.h b/arch/arm/mach-zynqmp/include/mach/debug_ll.h
new file mode 100644
index 0000000000..cd2583a35b
--- /dev/null
+++ b/arch/arm/mach-zynqmp/include/mach/debug_ll.h
@@ -0,0 +1,30 @@
+#ifndef __MACH_DEBUG_LL_H__
+#define __MACH_DEBUG_LL_H__
+
+#include <io.h>
+
+#define ZYNQMP_UART0_BASE 0xFF000000
+#define ZYNQMP_UART1_BASE 0xFF010000
+#define ZYNQMP_UART_BASE ZYNQMP_UART0_BASE
+#define ZYNQMP_DEBUG_LL_UART_BASE ZYNQMP_UART_BASE
+
+#define ZYNQMP_UART_RXTXFIFO 0x30
+#define ZYNQMP_UART_CHANNEL_STS 0x2C
+
+#define ZYNQMP_UART_STS_TFUL (1 << 4)
+#define ZYNQMP_UART_TXDIS (1 << 5)
+
+static inline void PUTC_LL(int c)
+{
+ void __iomem *base = (void __iomem *)ZYNQMP_DEBUG_LL_UART_BASE;
+
+ if (readl(base) & ZYNQMP_UART_TXDIS)
+ return;
+
+ while ((readl(base + ZYNQMP_UART_CHANNEL_STS) & ZYNQMP_UART_STS_TFUL) != 0)
+ ;
+
+ writel(c, base + 0x30);
+}
+
+#endif
diff --git a/arch/arm/mach-zynqmp/zynqmp.c b/arch/arm/mach-zynqmp/zynqmp.c
new file mode 100644
index 0000000000..04aedb59e0
--- /dev/null
+++ b/arch/arm/mach-zynqmp/zynqmp.c
@@ -0,0 +1,22 @@
+/*
+ * (c) 2018 Michael Tretter <m.tretter@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <common.h>
+#include <init.h>
+
+static int zynqmp_init(void)
+{
+ return 0;
+}
+postcore_initcall(zynqmp_init);
diff --git a/images/Makefile b/images/Makefile
index 5c4d99ac5a..4d28f73a57 100644
--- a/images/Makefile
+++ b/images/Makefile
@@ -113,6 +113,7 @@ include $(srctree)/images/Makefile.socfpga
include $(srctree)/images/Makefile.tegra
include $(srctree)/images/Makefile.vexpress
include $(srctree)/images/Makefile.at91
+include $(srctree)/images/Makefile.zynqmp
targets += $(image-y) pbl.lds barebox.x barebox.z
targets += $(patsubst %,%.pblx,$(pblx-y))
diff --git a/images/Makefile.zynqmp b/images/Makefile.zynqmp
new file mode 100644
index 0000000000..f977a6baff
--- /dev/null
+++ b/images/Makefile.zynqmp
@@ -0,0 +1,7 @@
+#
+# barebox image generation Makefile for Xilinx Zynq UltraScale+
+#
+
+pblx-$(CONFIG_MACH_XILINX_ZCU104) += start_zynqmp_zcu104
+FILE_barebox-zynqmp-zcu104.img = start_zynqmp_zcu104.pblx
+image-$(CONFIG_MACH_XILINX_ZCU104) += barebox-zynqmp-zcu104.img
--
2.19.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-11-23 13:36 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-23 13:35 [PATCH 0/3] Xilinx Zynq Ultrascale+ MPSoC support Michael Tretter
2018-11-23 13:35 ` [PATCH 1/3] ARM: lib64: .gitignore barebox.lds Michael Tretter
2018-11-23 13:35 ` [PATCH 2/3] ARM: aarch64: compile with general-regs-only Michael Tretter
2018-11-23 13:48 ` Rouven Czerwinski
2018-11-23 13:35 ` Michael Tretter [this message]
2018-11-23 13:55 ` [PATCH 3/3] ARM: zynqmp: add support for Xilinx ZCU104 board Rouven Czerwinski
2018-11-26 10:37 ` Roland Hieber
2018-11-23 14:38 ` Michael Tretter
2018-11-23 15:08 ` Oleksij Rempel
2018-11-23 18:27 ` Michael Tretter
2018-11-23 18:41 ` Oleksij Rempel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181123133553.24761-4-m.tretter@pengutronix.de \
--to=m.tretter@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox