From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1gWNu1-00059S-E9 for barebox@lists.infradead.org; Mon, 10 Dec 2018 15:55:27 +0000 From: Roland Hieber Date: Mon, 10 Dec 2018 16:55:11 +0100 Message-Id: <20181210155511.1376-3-rhi@pengutronix.de> In-Reply-To: <20181210155511.1376-1-rhi@pengutronix.de> References: <20181210155511.1376-1-rhi@pengutronix.de> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 3/3] Documentation: i.MX: Kindle 4/5: fix sphinx warnings To: Barebox Mailing List Cc: Roland Hieber sphinx warns: Documentation/boards/imx/amazon-kindle-4-5.rst:39: WARNING: Enumerated list ends without a blank line; unexpected unindent. Documentation/boards/imx/amazon-kindle-4-5.rst:42: WARNING: Enumerated list ends without a blank line; unexpected unindent. Documentation/boards/imx/amazon-kindle-4-5.rst:45: WARNING: Enumerated list ends without a blank line; unexpected unindent. Solve this by fixing the list enumeration and adding blank lines. Signed-off-by: Roland Hieber --- Documentation/boards/imx/amazon-kindle-4-5.rst | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/boards/imx/amazon-kindle-4-5.rst b/Documentation/boards/imx/amazon-kindle-4-5.rst index 58f38a058e..26f072e28d 100644 --- a/Documentation/boards/imx/amazon-kindle-4-5.rst +++ b/Documentation/boards/imx/amazon-kindle-4-5.rst @@ -25,35 +25,37 @@ on iomux pullups may significantly reduce your standby-time. Building barebox ---------------- ``make kindle-mx50_defconfig`` should get you a working config. Uploading barebox ----------------- To upload and run a new bootloader, the older devices can be put into USB bootloader mode by the SoC microcode: 1. Connect the Kindle to your host computer with a USB cable. 2. Power down the device by holding the power button until the power LED goes dark (about 10 seconds). -4. Hold the power button, and hold down a device-specific special key: +3. Hold the power button, and hold down a device-specific special key: + * the fiveway down button on the model D01100 * the home button on model D01200 + 4. Then release the power button, but still hold the special key. 5. A new USB device named ``NS Blank CODEX`` should appear on your host computer. You can now release the special button. -7. Finally, upload barebox to the Kindle by using: +6. Finally, upload barebox to the Kindle by using: .. code-block:: console $ scripts/imx/imx-usb-loader barebox-kindle-d01100.img $ scripts/imx/imx-usb-loader barebox-kindle-d01200.img Additionally, a USB serial ACM console will be launched by a barebox init script when: * the cursor select key is pressed during startup of model D01100 * the home button is pressed within a second after startup of model D01200. (If you press the home button during startup, you will enter USB boot mode.) * the EY21 has no keys to press, a USB console will be launched for 10s. -- 2.19.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox