mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 39/58] PCI: imx6: Factor out ref clock enable
Date: Wed, 12 Dec 2018 23:11:25 -0800	[thread overview]
Message-ID: <20181213071144.31691-40-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20181213071144.31691-1-andrew.smirnov@gmail.com>

Port of a Linux commit 4d1821e729b5d2060ef8c9825af1dacc2182da38

  Factor out ref clock enable to make it cleaner to add imx6sx support.  No
  functional change intended.

  Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
  Tested-by: Christoph Fritz <chf.fritz@googlemail.com>

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 drivers/pci/pci-imx6.c | 43 ++++++++++++++++++++++++++++--------------
 1 file changed, 29 insertions(+), 14 deletions(-)

diff --git a/drivers/pci/pci-imx6.c b/drivers/pci/pci-imx6.c
index fa62aa3a4..447bb72ad 100644
--- a/drivers/pci/pci-imx6.c
+++ b/drivers/pci/pci-imx6.c
@@ -285,6 +285,28 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
 	}
 }
 
+static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
+{
+	u32 gpr1;
+
+	/* power up core phy and enable ref clock */
+	gpr1 = readl(imx6_pcie->iomuxc_gpr + IOMUXC_GPR1);
+	gpr1 &= ~IMX6Q_GPR1_PCIE_TEST_PD;
+	writel(gpr1, imx6_pcie->iomuxc_gpr + IOMUXC_GPR1);
+	/*
+	 * the async reset input need ref clock to sync internally,
+	 * when the ref clock comes after reset, internal synced
+	 * reset time is too short, cannot meet the requirement.
+	 * add one ~10us delay here.
+	 */
+	udelay(10);
+	gpr1 = readl(imx6_pcie->iomuxc_gpr + IOMUXC_GPR1);
+	gpr1 |= IMX6Q_GPR1_PCIE_REF_CLK_EN;
+	writel(gpr1, imx6_pcie->iomuxc_gpr + IOMUXC_GPR1);
+
+	return 0;
+}
+
 static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 {
 	struct device_d *dev = imx6_pcie->pp.dev;
@@ -309,20 +331,11 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 		goto err_pcie;
 	}
 
-	/* power up core phy and enable ref clock */
-	gpr1 = readl(imx6_pcie->iomuxc_gpr + IOMUXC_GPR1);
-	gpr1 &= ~IMX6Q_GPR1_PCIE_TEST_PD;
-	writel(gpr1, imx6_pcie->iomuxc_gpr + IOMUXC_GPR1);
-	/*
-	 * the async reset input need ref clock to sync internally,
-	 * when the ref clock comes after reset, internal synced
-	 * reset time is too short, cannot meet the requirement.
-	 * add one ~10us delay here.
-	 */
-	udelay(10);
-	gpr1 = readl(imx6_pcie->iomuxc_gpr + IOMUXC_GPR1);
-	gpr1 |= IMX6Q_GPR1_PCIE_REF_CLK_EN;
-	writel(gpr1, imx6_pcie->iomuxc_gpr + IOMUXC_GPR1);
+	ret = imx6_pcie_enable_ref_clk(imx6_pcie);
+	if (ret) {
+		dev_err(dev, "unable to enable pcie ref clock\n");
+		goto err_ref_clk;
+	}
 
 	/* allow the clocks to stabilize */
 	udelay(200);
@@ -351,6 +364,8 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 
 	return;
 
+err_ref_clk:
+	clk_disable(imx6_pcie->pcie);
 err_pcie:
 	clk_disable(imx6_pcie->pcie_bus);
 err_pcie_bus:
-- 
2.19.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2018-12-13  7:12 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-13  7:10 [PATCH 00/58] PCI i.MX6/DesignWare sync up with 4.20-rc1 Andrey Smirnov
2018-12-13  7:10 ` [PATCH 01/58] PCI: desginware: Remove bogus prototypes Andrey Smirnov
2018-12-13  7:10 ` [PATCH 02/58] PCI: designware: Consolidate outbound iATU programming functions Andrey Smirnov
2018-12-13  7:10 ` [PATCH 03/58] PCI: designware: Use iATU0 for cfg and IO, iATU1 for MEM Andrey Smirnov
2018-12-13  7:10 ` [PATCH 04/58] PCI: designware: Fix PORT_LOGIC_LINK_WIDTH_MASK Andrey Smirnov
2018-12-13  7:10 ` [PATCH 05/58] PCI: designware: Use exact access size in dw_pcie_cfg_read() Andrey Smirnov
2018-12-13  7:10 ` [PATCH 06/58] PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces Andrey Smirnov
2018-12-13  7:10 ` [PATCH 07/58] PCI: designware: Require config accesses to be naturally aligned Andrey Smirnov
2018-12-13  7:10 ` [PATCH 08/58] PCI: designware: Make "num-lanes" an optional DT property Andrey Smirnov
2018-12-13  7:10 ` [PATCH 09/58] PCI: designware: Ensure ATU is enabled before IO/conf space accesses Andrey Smirnov
2018-12-13  7:10 ` [PATCH 10/58] PCI: designware: Simplify control flow Andrey Smirnov
2018-12-13  7:10 ` [PATCH 11/58] PCI: designware: Make config accessor override checking symmetric Andrey Smirnov
2018-12-13  7:10 ` [PATCH 12/58] PCI: designware: Explain why we don't program ATU for some platforms Andrey Smirnov
2018-12-13  7:10 ` [PATCH 13/58] PCI: imx6: Move link up check into imx6_pcie_wait_for_link() Andrey Smirnov
2018-12-13  7:11 ` [PATCH 14/58] PCI: designware: Add generic dw_pcie_wait_for_link() Andrey Smirnov
2018-12-13  7:11 ` [PATCH 15/58] PCI: designware: Add default link up check if sub-driver doesn't override Andrey Smirnov
2018-12-13  7:11 ` [PATCH 16/58] PCI: designware: Move Root Complex setup code to dw_pcie_setup_rc() Andrey Smirnov
2018-12-13  7:11 ` [PATCH 17/58] PCI: designware: Remove incorrect RC memory base/limit configuration Andrey Smirnov
2018-12-13  7:11 ` [PATCH 18/58] PCI: designware: Return data directly from dw_pcie_readl_rc() Andrey Smirnov
2018-12-13  7:11 ` [PATCH 19/58] PCI: designware: Move link wait definitions to .c file Andrey Smirnov
2018-12-13  7:11 ` [PATCH 20/58] PCI: designware: Wait for iATU enable Andrey Smirnov
2018-12-13  7:11 ` [PATCH 21/58] PCI: designware: Check LTSSM training bit before deciding link is up Andrey Smirnov
2018-12-13  7:11 ` [PATCH 22/58] PCI: designware: Keep viewport fixed for IO transaction if num_viewport > 2 Andrey Smirnov
2018-12-14  6:49   ` Andrey Smirnov
2018-12-13  7:11 ` [PATCH 23/58] PCI: designware: Exchange viewport of `MEMORYs' and `CFGs/IOs' Andrey Smirnov
2018-12-13  7:11 ` [PATCH 24/58] PCI: designware: Rename dw_pcie_valid_config() to dw_pcie_valid_device() Andrey Smirnov
2018-12-13  7:11 ` [PATCH 25/58] PCI: designware: Simplify pcie_host_ops.readl_rc() and .writel_rc() interfaces Andrey Smirnov
2018-12-13  7:11 ` [PATCH 26/58] PCI: designware: Swap order of dw_pcie_writel_rc() reg/val arguments Andrey Smirnov
2018-12-13  7:11 ` [PATCH 27/58] PCI: designware: Export dw_pcie_readl_rc(), dw_pcie_writel_rc() Andrey Smirnov
2018-12-13  7:11 ` [PATCH 28/58] PCI: dwc: designware: Move register defines to designware header file Andrey Smirnov
2018-12-13  7:11 ` [PATCH 29/58] PCI: dwc: all: Rename cfg_read/cfg_write to read/write Andrey Smirnov
2018-12-13  7:11 ` [PATCH 30/58] PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init() Andrey Smirnov
2018-12-13  7:11 ` [PATCH 31/58] PCI: imx6: Add local struct device pointers Andrey Smirnov
2018-12-13  7:11 ` [PATCH 32/58] PCI: imx6: Removed unused struct imx6_pcie.mem_base Andrey Smirnov
2018-12-13  7:11 ` [PATCH 33/58] PCI: imx6: Pass struct imx6_pcie to PHY accessors Andrey Smirnov
2018-12-13  7:11 ` [PATCH 34/58] PCI: imx6: Pass device-specific struct to internal functions Andrey Smirnov
2018-12-13  7:11 ` [PATCH 35/58] PCI: imx6: Use generic DesignWare accessors Andrey Smirnov
2018-12-13  7:11 ` [PATCH 36/58] PCI: imx6: Reorder struct imx6_pcie Andrey Smirnov
2018-12-13  7:11 ` [PATCH 37/58] PCI: imx6: Port error messages for imx6_pcie_deassert_core_reset() Andrey Smirnov
2018-12-13  7:11 ` [PATCH 38/58] PCI: imx6: Remove unused return values Andrey Smirnov
2018-12-13  7:11 ` Andrey Smirnov [this message]
2018-12-13  7:11 ` [PATCH 40/58] PCI: imx6: Add DT property for link gen, default to Gen1 Andrey Smirnov
2018-12-13  7:11 ` [PATCH 41/58] PCI: imx6: Remove redundant "Link never came up" message Andrey Smirnov
2018-12-13  7:11 ` [PATCH 42/58] PCI: imx6: Remove LTSSM disable workaround Andrey Smirnov
2018-12-13  7:11 ` [PATCH 43/58] PCI: dwc: all: Split struct pcie_port into host-only and core structures Andrey Smirnov
2018-12-13  7:11 ` [PATCH 44/58] PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc() Andrey Smirnov
2018-12-13  7:11 ` [PATCH 45/58] PCI: dwc: designware: Fix style errors in pcie-designware.c Andrey Smirnov
2018-12-13  7:11 ` [PATCH 46/58] PCI: dwc: Split pcie-designware.c into host and core files Andrey Smirnov
2018-12-13  7:11 ` [PATCH 47/58] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument Andrey Smirnov
2018-12-13  7:11 ` [PATCH 48/58] PCI: dwc: all: Modify dbi accessors to access data of 4/2/1 bytes Andrey Smirnov
2018-12-13  7:11 ` [PATCH 49/58] PCI: dwc: designware: Test PCIE_ATU_ENABLE bit specifically Andrey Smirnov
2018-12-13  7:11 ` [PATCH 50/58] PCI: Fix typos and whitespace errors Andrey Smirnov
2018-12-13  7:11 ` [PATCH 51/58] PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate Andrey Smirnov
2018-12-13  7:11 ` [PATCH 52/58] PCI: dwc: Replace lower into upper case characters Andrey Smirnov
2018-12-13  7:11 ` [PATCH 53/58] PCI: dwc: designware: Handle ->host_init() failures Andrey Smirnov
2018-12-13  7:11 ` [PATCH 54/58] PCI: dwc: Add accessors for write permission of DBI read-only registers Andrey Smirnov
2018-12-13  7:11 ` [PATCH 55/58] PCI: dwc: Enable write permission for Class Code, Interrupt Pin updates Andrey Smirnov
2018-12-13  7:11 ` [PATCH 56/58] PCI: dwc: Fix enumeration end when reaching root subordinate Andrey Smirnov
2018-12-13  7:11 ` [PATCH 57/58] PCI: dwc: Small computation improvement Andrey Smirnov
2018-12-13  7:11 ` [PATCH 58/58] PCI: dwc: Constify dw_pcie_host_ops structures Andrey Smirnov
2018-12-14  8:28 ` [PATCH 00/58] PCI i.MX6/DesignWare sync up with 4.20-rc1 Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181213071144.31691-40-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox