mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 10/23] mtd: nand: omap: fix bch8_hw_romcode ecc layout
Date: Fri, 14 Dec 2018 15:17:17 +0100	[thread overview]
Message-ID: <20181214141730.26181-11-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20181214141730.26181-1-s.hauer@pengutronix.de>

The ecc layout we provide to the nand core is broken since
00f119a293. Before this commit ecc bytes/size were per page
and now they are per subpage. The offset for the first ecc
byte was calculated as oob_end - num_ecc_bytes which must
now become oob_end - num_ecc_bytes * ecc_steps.

Fixes: 00f119a293 ("mtd: omap gpmc: fix ecc bytes/size")

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/mtd/nand/nand_omap_gpmc.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/nand_omap_gpmc.c b/drivers/mtd/nand/nand_omap_gpmc.c
index 91f5682e9e..d64ae41e7a 100644
--- a/drivers/mtd/nand/nand_omap_gpmc.c
+++ b/drivers/mtd/nand/nand_omap_gpmc.c
@@ -763,10 +763,14 @@ static int omap_gpmc_eccmode(struct gpmc_nand_info *oinfo,
 		oinfo->nand.ecc.size     = 512;
 		oinfo->nand.ecc.strength = BCH8_MAX_ERROR;
 		omap_oobinfo.oobfree->offset = offset;
+		oinfo->nand.ecc.steps = minfo->writesize / oinfo->nand.ecc.size;
+		oinfo->nand.ecc.total = oinfo->nand.ecc.steps * oinfo->nand.ecc.bytes;
+
 		omap_oobinfo.oobfree->length = minfo->oobsize -
 					offset - omap_oobinfo.eccbytes;
-		offset = minfo->oobsize - oinfo->nand.ecc.bytes;
-		for (i = 0; i < oinfo->nand.ecc.bytes; i++)
+		offset = minfo->oobsize - oinfo->nand.ecc.total;
+
+		for (i = 0; i < oinfo->nand.ecc.total; i++)
 			omap_oobinfo.eccpos[i] = i + offset;
 		break;
 	case OMAP_ECC_BCH8_CODE_HW_ROMCODE:
-- 
2.19.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2018-12-14 14:17 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-14 14:17 [PATCH 00/23] AM3517 support Sascha Hauer
2018-12-14 14:17 ` [PATCH 01/23] net: davinci-emac: fix buggy channel tear down Sascha Hauer
2018-12-14 14:17 ` [PATCH 02/23] net: davinci-emac: Add timeout to polling loop Sascha Hauer
2018-12-14 14:17 ` [PATCH 03/23] net: davinci-emac: switch to device tree support Sascha Hauer
2018-12-14 14:17 ` [PATCH 04/23] mci: omap: Improve error handling Sascha Hauer
2018-12-14 14:17 ` [PATCH 05/23] mci: omap: use IS_ENABLED() rather than #ifdef Sascha Hauer
2018-12-14 14:17 ` [PATCH 06/23] mtd: nand: omap: Use dev_dbg when a struct device * is available Sascha Hauer
2018-12-14 14:17 ` [PATCH 07/23] mtd: nand: omap: Fix hamming correct return values Sascha Hauer
2018-12-14 14:17 ` [PATCH 08/23] mtd: nand: omap: Disable subpage reads in hardware ecc mode Sascha Hauer
2018-12-14 14:17 ` [PATCH 09/23] mtd: nand: omap: remove unused function argument Sascha Hauer
2018-12-14 14:17 ` Sascha Hauer [this message]
2018-12-14 14:17 ` [PATCH 11/23] mtd: nand: omap: set eccbytes correctly Sascha Hauer
2018-12-14 14:17 ` [PATCH 12/23] mtd: nand: omap: unbreak BCH8 support Sascha Hauer
2018-12-14 14:17 ` [PATCH 13/23] ARM: omap: Add missing include Sascha Hauer
2018-12-14 14:17 ` [PATCH 14/23] ARM: omap: dmtimer: Turn into a driver Sascha Hauer
2018-12-17 13:37   ` Teresa Remmet
2018-12-18  7:46     ` Sascha Hauer
2018-12-14 14:17 ` [PATCH 15/23] ARM: omap: 32ktimer: " Sascha Hauer
2018-12-14 14:17 ` [PATCH 16/23] ARM: omap: Add AM35XX support Sascha Hauer
2018-12-14 14:17 ` [PATCH 17/23] ARM: omap: enable am33xx_uart_soft_reset for AM35xx Sascha Hauer
2018-12-14 14:17 ` [PATCH 18/23] ARM: omap3: Add support for reset reason detection Sascha Hauer
2018-12-14 14:17 ` [PATCH 19/23] ARM: omap: Add AM3517 specific mux configuration Sascha Hauer
2018-12-14 14:17 ` [PATCH 20/23] ARM: omap: Add emif4 support for AM3517 Sascha Hauer
2018-12-14 14:17 ` [PATCH 21/23] ARM: omap: AM3517: Change default clock rate " Sascha Hauer
2018-12-14 14:17 ` [PATCH 22/23] ARM: omap: Add board support for WAGO pfc200 platform Sascha Hauer
2019-01-07 11:40   ` Heinrich.Toews
2019-01-07 11:46     ` Sascha Hauer
2018-12-14 14:17 ` [PATCH 23/23] ARM: omap: am33xx_defconfig: Enable more boards and rename Sascha Hauer
2018-12-14 16:22 ` [PATCH 00/23] AM3517 support Ladislav Michl
2018-12-14 19:32   ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181214141730.26181-11-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox