mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 19/23] ARM: omap: Add AM3517 specific mux configuration
Date: Fri, 14 Dec 2018 15:17:26 +0100	[thread overview]
Message-ID: <20181214141730.26181-20-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20181214141730.26181-1-s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-omap/include/mach/omap3-mux.h | 49 ++++++++++++++++++++-
 1 file changed, 48 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap/include/mach/omap3-mux.h b/arch/arm/mach-omap/include/mach/omap3-mux.h
index d6fb9c393c..a679e25567 100644
--- a/arch/arm/mach-omap/include/mach/omap3-mux.h
+++ b/arch/arm/mach-omap/include/mach/omap3-mux.h
@@ -413,4 +413,51 @@
 #define CONTROL_PADCONF_SDRC_CKE0	0x0262
 #define CONTROL_PADCONF_SDRC_CKE1	0x0264
 
-#endif /* _ASM_ARCH_OMAP3_MUX_H_ */
+/* AM3517 specific mux configuration */
+#define CONTROL_PADCONF_SYS_NRESWARM	0x0A08
+/* CCDC */
+#define CONTROL_PADCONF_CCDC_PCLK	0x01E4
+#define CONTROL_PADCONF_CCDC_FIELD	0x01E6
+#define CONTROL_PADCONF_CCDC_HD		0x01E8
+#define CONTROL_PADCONF_CCDC_VD		0x01EA
+#define CONTROL_PADCONF_CCDC_WEN	0x01EC
+#define CONTROL_PADCONF_CCDC_DATA0	0x01EE
+#define CONTROL_PADCONF_CCDC_DATA1	0x01F0
+#define CONTROL_PADCONF_CCDC_DATA2	0x01F2
+#define CONTROL_PADCONF_CCDC_DATA3	0x01F4
+#define CONTROL_PADCONF_CCDC_DATA4	0x01F6
+#define CONTROL_PADCONF_CCDC_DATA5	0x01F8
+#define CONTROL_PADCONF_CCDC_DATA6	0x01FA
+#define CONTROL_PADCONF_CCDC_DATA7	0x01FC
+/* RMII */
+#define CONTROL_PADCONF_RMII_MDIO_DATA	0x01FE
+#define CONTROL_PADCONF_RMII_MDIO_CLK	0x0200
+#define CONTROL_PADCONF_RMII_RXD0	0x0202
+#define CONTROL_PADCONF_RMII_RXD1	0x0204
+#define CONTROL_PADCONF_RMII_CRS_DV	0x0206
+#define CONTROL_PADCONF_RMII_RXER	0x0208
+#define CONTROL_PADCONF_RMII_TXD0	0x020A
+#define CONTROL_PADCONF_RMII_TXD1	0x020C
+#define CONTROL_PADCONF_RMII_TXEN	0x020E
+#define CONTROL_PADCONF_RMII_50MHZ_CLK	0x0210
+#define CONTROL_PADCONF_USB0_DRVBUS	0x0212
+/* CAN */
+#define CONTROL_PADCONF_HECC1_TXD	0x0214
+#define CONTROL_PADCONF_HECC1_RXD	0x0216
+
+#define CONTROL_PADCONF_SYS_BOOT7	0x0218
+#define CONTROL_PADCONF_SDRC_DQS0N	0x021A
+#define CONTROL_PADCONF_SDRC_DQS1N	0x021C
+#define CONTROL_PADCONF_SDRC_DQS2N	0x021E
+#define CONTROL_PADCONF_SDRC_DQS3N	0x0220
+#define CONTROL_PADCONF_STRBEN_DLY0	0x0222
+#define CONTROL_PADCONF_STRBEN_DLY1	0x0224
+#define CONTROL_PADCONF_SYS_BOOT8	0x0226
+
+/* AM/DM37xx specific */
+#define CONTROL_PADCONF_GPIO127		0x0A54
+#define CONTROL_PADCONF_GPIO126		0x0A56
+#define CONTROL_PADCONF_GPIO128		0x0A58
+#define CONTROL_PADCONF_GPIO129		0x0A5A
+
+#endif
-- 
2.19.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2018-12-14 14:17 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-14 14:17 [PATCH 00/23] AM3517 support Sascha Hauer
2018-12-14 14:17 ` [PATCH 01/23] net: davinci-emac: fix buggy channel tear down Sascha Hauer
2018-12-14 14:17 ` [PATCH 02/23] net: davinci-emac: Add timeout to polling loop Sascha Hauer
2018-12-14 14:17 ` [PATCH 03/23] net: davinci-emac: switch to device tree support Sascha Hauer
2018-12-14 14:17 ` [PATCH 04/23] mci: omap: Improve error handling Sascha Hauer
2018-12-14 14:17 ` [PATCH 05/23] mci: omap: use IS_ENABLED() rather than #ifdef Sascha Hauer
2018-12-14 14:17 ` [PATCH 06/23] mtd: nand: omap: Use dev_dbg when a struct device * is available Sascha Hauer
2018-12-14 14:17 ` [PATCH 07/23] mtd: nand: omap: Fix hamming correct return values Sascha Hauer
2018-12-14 14:17 ` [PATCH 08/23] mtd: nand: omap: Disable subpage reads in hardware ecc mode Sascha Hauer
2018-12-14 14:17 ` [PATCH 09/23] mtd: nand: omap: remove unused function argument Sascha Hauer
2018-12-14 14:17 ` [PATCH 10/23] mtd: nand: omap: fix bch8_hw_romcode ecc layout Sascha Hauer
2018-12-14 14:17 ` [PATCH 11/23] mtd: nand: omap: set eccbytes correctly Sascha Hauer
2018-12-14 14:17 ` [PATCH 12/23] mtd: nand: omap: unbreak BCH8 support Sascha Hauer
2018-12-14 14:17 ` [PATCH 13/23] ARM: omap: Add missing include Sascha Hauer
2018-12-14 14:17 ` [PATCH 14/23] ARM: omap: dmtimer: Turn into a driver Sascha Hauer
2018-12-17 13:37   ` Teresa Remmet
2018-12-18  7:46     ` Sascha Hauer
2018-12-14 14:17 ` [PATCH 15/23] ARM: omap: 32ktimer: " Sascha Hauer
2018-12-14 14:17 ` [PATCH 16/23] ARM: omap: Add AM35XX support Sascha Hauer
2018-12-14 14:17 ` [PATCH 17/23] ARM: omap: enable am33xx_uart_soft_reset for AM35xx Sascha Hauer
2018-12-14 14:17 ` [PATCH 18/23] ARM: omap3: Add support for reset reason detection Sascha Hauer
2018-12-14 14:17 ` Sascha Hauer [this message]
2018-12-14 14:17 ` [PATCH 20/23] ARM: omap: Add emif4 support for AM3517 Sascha Hauer
2018-12-14 14:17 ` [PATCH 21/23] ARM: omap: AM3517: Change default clock rate " Sascha Hauer
2018-12-14 14:17 ` [PATCH 22/23] ARM: omap: Add board support for WAGO pfc200 platform Sascha Hauer
2019-01-07 11:40   ` Heinrich.Toews
2019-01-07 11:46     ` Sascha Hauer
2018-12-14 14:17 ` [PATCH 23/23] ARM: omap: am33xx_defconfig: Enable more boards and rename Sascha Hauer
2018-12-14 16:22 ` [PATCH 00/23] AM3517 support Ladislav Michl
2018-12-14 19:32   ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181214141730.26181-20-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox