From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH v2 55/65] PCI: dwc: designware: Test PCIE_ATU_ENABLE bit specifically
Date: Sun, 16 Dec 2018 21:19:15 -0800 [thread overview]
Message-ID: <20181217051925.17582-56-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20181217051925.17582-1-andrew.smirnov@gmail.com>
Port of a Linux commit e9be4d78618af2e0d5592d9556cf0bba210cfd1a
The ATU CTRL2 register is 32 bits, and bits other than the enable bit may
be set. To check whether the ATU is enabled or not, we should test the
enable bit specifically.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/pci/pcie-designware.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/pcie-designware.c b/drivers/pci/pcie-designware.c
index 5c476e815..d2d4fe34a 100644
--- a/drivers/pci/pcie-designware.c
+++ b/drivers/pci/pcie-designware.c
@@ -183,7 +183,7 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
*/
for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
- if (val == PCIE_ATU_ENABLE)
+ if (val & PCIE_ATU_ENABLE)
return;
udelay(LINK_WAIT_IATU_MAX);
--
2.19.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-12-17 5:21 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-17 5:18 [PATCH v2 00/65] PCI i.MX6/DesignWare sync up with 4.20-rc1 Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 01/65] PCI: desginware: Remove bogus prototypes Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 02/65] PCI: designware: Consolidate outbound iATU programming functions Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 03/65] PCI: designware: Use iATU0 for cfg and IO, iATU1 for MEM Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 04/65] PCI: designware: Fix PORT_LOGIC_LINK_WIDTH_MASK Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 05/65] PCI: designware: Use exact access size in dw_pcie_cfg_read() Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 06/65] PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 07/65] PCI: designware: Require config accesses to be naturally aligned Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 08/65] PCI: designware: Make "num-lanes" an optional DT property Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 09/65] PCI: designware: Ensure ATU is enabled before IO/conf space accesses Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 10/65] PCI: designware: Simplify control flow Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 11/65] PCI: designware: Make config accessor override checking symmetric Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 12/65] PCI: designware: Explain why we don't program ATU for some platforms Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 13/65] PCI: imx6: Move link up check into imx6_pcie_wait_for_link() Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 14/65] PCI: designware: Add generic dw_pcie_wait_for_link() Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 15/65] PCI: designware: Add default link up check if sub-driver doesn't override Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 16/65] PCI: designware: Move Root Complex setup code to dw_pcie_setup_rc() Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 17/65] PCI: designware: Remove incorrect RC memory base/limit configuration Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 18/65] PCI: designware: Return data directly from dw_pcie_readl_rc() Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 19/65] PCI: designware: Move link wait definitions to .c file Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 20/65] PCI: designware: Wait for iATU enable Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 21/65] PCI: designware: Add iATU Unroll feature Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 22/65] PCI: designware: Check LTSSM training bit before deciding link is up Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 23/65] PCI: designware: Keep viewport fixed for IO transaction if num_viewport > 2 Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 24/65] PCI: designware: Exchange viewport of `MEMORYs' and `CFGs/IOs' Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 25/65] PCI: designware: Rename dw_pcie_valid_config() to dw_pcie_valid_device() Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 26/65] PCI: designware: Simplify dw_pcie_readl_unroll(), dw_pcie_writel_unroll() Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 27/65] PCI: designware: Simplify pcie_host_ops.readl_rc() and .writel_rc() interfaces Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 28/65] PCI: designware: Swap order of dw_pcie_writel_rc() reg/val arguments Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 29/65] PCI: designware: Export dw_pcie_readl_rc(), dw_pcie_writel_rc() Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 30/65] PCI: designware: Uninline register accessors Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 31/65] PCI: designware: Swap order of dw_pcie_writel_unroll() reg/val arguments Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 32/65] PCI: designware: Check for iATU unroll only on platforms that use ATU Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 33/65] PCI: dwc: designware: Move register defines to designware header file Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 34/65] PCI: dwc: all: Rename cfg_read/cfg_write to read/write Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 35/65] PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init() Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 36/65] PCI: imx6: Add local struct device pointers Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 37/65] PCI: imx6: Removed unused struct imx6_pcie.mem_base Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 38/65] PCI: imx6: Pass struct imx6_pcie to PHY accessors Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 39/65] PCI: imx6: Pass device-specific struct to internal functions Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 40/65] PCI: imx6: Use generic DesignWare accessors Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 41/65] PCI: imx6: Reorder struct imx6_pcie Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 42/65] PCI: imx6: Port error messages for imx6_pcie_deassert_core_reset() Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 43/65] PCI: imx6: Remove unused return values Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 44/65] PCI: imx6: Factor out ref clock enable Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 45/65] PCI: imx6: Add DT property for link gen, default to Gen1 Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 46/65] PCI: imx6: Remove redundant "Link never came up" message Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 47/65] PCI: imx6: Remove LTSSM disable workaround Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 48/65] PCI: dwc: all: Split struct pcie_port into host-only and core structures Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 49/65] PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc() Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 50/65] PCI: dwc: designware: Fix style errors in pcie-designware.c Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 51/65] PCI: dwc: Split pcie-designware.c into host and core files Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 52/65] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 53/65] PCI: dwc: all: Modify dbi accessors to access data of 4/2/1 bytes Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 54/65] PCI: dwc: designware: Move _unroll configurations to a separate function Andrey Smirnov
2018-12-17 5:19 ` Andrey Smirnov [this message]
2018-12-17 5:19 ` [PATCH v2 56/65] PCI: dwc: designware: Make dw_pcie_prog_*_atu_unroll() static Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 57/65] PCI: Fix typos and whitespace errors Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 58/65] PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 59/65] PCI: dwc: Replace lower into upper case characters Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 60/65] PCI: dwc: designware: Handle ->host_init() failures Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 61/65] PCI: dwc: Add accessors for write permission of DBI Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 62/65] PCI: dwc: Enable write permission for Class Code, Interrupt Pin updates Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 63/65] PCI: dwc: Fix enumeration end when reaching root subordinate Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 64/65] PCI: dwc: Small computation improvement Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 65/65] PCI: dwc: Constify dw_pcie_host_ops structures Andrey Smirnov
2019-01-07 22:55 ` [PATCH v2 00/65] PCI i.MX6/DesignWare sync up with 4.20-rc1 Andrey Smirnov
2019-01-08 15:31 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181217051925.17582-56-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox