From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH v2 60/65] PCI: dwc: designware: Handle ->host_init() failures
Date: Sun, 16 Dec 2018 21:19:20 -0800 [thread overview]
Message-ID: <20181217051925.17582-61-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20181217051925.17582-1-andrew.smirnov@gmail.com>
Port of a Linux commit 4a301766f5263dd94c1b95d1b1bbdf338afb1a37
In several dwc-based drivers, ->host_init() can fail, so make sure to
propagate and handle this to avoid continuing operation of a driver or
hardware in an invalid state.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/pci/pci-imx6.c | 4 +++-
drivers/pci/pcie-designware-host.c | 7 +++++--
drivers/pci/pcie-designware.h | 2 +-
3 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/pci-imx6.c b/drivers/pci/pci-imx6.c
index 78aa5215a..1807f29c9 100644
--- a/drivers/pci/pci-imx6.c
+++ b/drivers/pci/pci-imx6.c
@@ -477,7 +477,7 @@ err_reset_phy:
return ret;
}
-static void imx6_pcie_host_init(struct pcie_port *pp)
+static int imx6_pcie_host_init(struct pcie_port *pp)
{
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
@@ -487,6 +487,8 @@ static void imx6_pcie_host_init(struct pcie_port *pp)
imx6_pcie_deassert_core_reset(imx6_pcie);
dw_pcie_setup_rc(pp);
imx6_pcie_establish_link(imx6_pcie);
+
+ return 0;
}
static int imx6_pcie_link_up(struct dw_pcie *pci)
diff --git a/drivers/pci/pcie-designware-host.c b/drivers/pci/pcie-designware-host.c
index 5de9cd8ea..e98560818 100644
--- a/drivers/pci/pcie-designware-host.c
+++ b/drivers/pci/pcie-designware-host.c
@@ -164,8 +164,11 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
if (ret)
pci->num_viewport = 2;
- if (pp->ops->host_init)
- pp->ops->host_init(pp);
+ if (pp->ops->host_init) {
+ ret = pp->ops->host_init(pp);
+ if (ret)
+ return ret;
+ }
pp->pci.parent = dev;
pp->pci.pci_ops = &dw_pcie_ops;
diff --git a/drivers/pci/pcie-designware.h b/drivers/pci/pcie-designware.h
index b18f1b83e..933c2b533 100644
--- a/drivers/pci/pcie-designware.h
+++ b/drivers/pci/pcie-designware.h
@@ -99,7 +99,7 @@ struct dw_pcie_host_ops {
unsigned int devfn, int where, int size, u32 *val);
int (*wr_other_conf)(struct pcie_port *pp, struct pci_bus *bus,
unsigned int devfn, int where, int size, u32 val);
- void (*host_init)(struct pcie_port *pp);
+ int (*host_init)(struct pcie_port *pp);
void (*scan_bus)(struct pcie_port *pp);
};
--
2.19.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-12-17 5:21 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-17 5:18 [PATCH v2 00/65] PCI i.MX6/DesignWare sync up with 4.20-rc1 Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 01/65] PCI: desginware: Remove bogus prototypes Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 02/65] PCI: designware: Consolidate outbound iATU programming functions Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 03/65] PCI: designware: Use iATU0 for cfg and IO, iATU1 for MEM Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 04/65] PCI: designware: Fix PORT_LOGIC_LINK_WIDTH_MASK Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 05/65] PCI: designware: Use exact access size in dw_pcie_cfg_read() Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 06/65] PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 07/65] PCI: designware: Require config accesses to be naturally aligned Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 08/65] PCI: designware: Make "num-lanes" an optional DT property Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 09/65] PCI: designware: Ensure ATU is enabled before IO/conf space accesses Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 10/65] PCI: designware: Simplify control flow Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 11/65] PCI: designware: Make config accessor override checking symmetric Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 12/65] PCI: designware: Explain why we don't program ATU for some platforms Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 13/65] PCI: imx6: Move link up check into imx6_pcie_wait_for_link() Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 14/65] PCI: designware: Add generic dw_pcie_wait_for_link() Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 15/65] PCI: designware: Add default link up check if sub-driver doesn't override Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 16/65] PCI: designware: Move Root Complex setup code to dw_pcie_setup_rc() Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 17/65] PCI: designware: Remove incorrect RC memory base/limit configuration Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 18/65] PCI: designware: Return data directly from dw_pcie_readl_rc() Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 19/65] PCI: designware: Move link wait definitions to .c file Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 20/65] PCI: designware: Wait for iATU enable Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 21/65] PCI: designware: Add iATU Unroll feature Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 22/65] PCI: designware: Check LTSSM training bit before deciding link is up Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 23/65] PCI: designware: Keep viewport fixed for IO transaction if num_viewport > 2 Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 24/65] PCI: designware: Exchange viewport of `MEMORYs' and `CFGs/IOs' Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 25/65] PCI: designware: Rename dw_pcie_valid_config() to dw_pcie_valid_device() Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 26/65] PCI: designware: Simplify dw_pcie_readl_unroll(), dw_pcie_writel_unroll() Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 27/65] PCI: designware: Simplify pcie_host_ops.readl_rc() and .writel_rc() interfaces Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 28/65] PCI: designware: Swap order of dw_pcie_writel_rc() reg/val arguments Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 29/65] PCI: designware: Export dw_pcie_readl_rc(), dw_pcie_writel_rc() Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 30/65] PCI: designware: Uninline register accessors Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 31/65] PCI: designware: Swap order of dw_pcie_writel_unroll() reg/val arguments Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 32/65] PCI: designware: Check for iATU unroll only on platforms that use ATU Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 33/65] PCI: dwc: designware: Move register defines to designware header file Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 34/65] PCI: dwc: all: Rename cfg_read/cfg_write to read/write Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 35/65] PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init() Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 36/65] PCI: imx6: Add local struct device pointers Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 37/65] PCI: imx6: Removed unused struct imx6_pcie.mem_base Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 38/65] PCI: imx6: Pass struct imx6_pcie to PHY accessors Andrey Smirnov
2018-12-17 5:18 ` [PATCH v2 39/65] PCI: imx6: Pass device-specific struct to internal functions Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 40/65] PCI: imx6: Use generic DesignWare accessors Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 41/65] PCI: imx6: Reorder struct imx6_pcie Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 42/65] PCI: imx6: Port error messages for imx6_pcie_deassert_core_reset() Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 43/65] PCI: imx6: Remove unused return values Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 44/65] PCI: imx6: Factor out ref clock enable Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 45/65] PCI: imx6: Add DT property for link gen, default to Gen1 Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 46/65] PCI: imx6: Remove redundant "Link never came up" message Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 47/65] PCI: imx6: Remove LTSSM disable workaround Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 48/65] PCI: dwc: all: Split struct pcie_port into host-only and core structures Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 49/65] PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc() Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 50/65] PCI: dwc: designware: Fix style errors in pcie-designware.c Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 51/65] PCI: dwc: Split pcie-designware.c into host and core files Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 52/65] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 53/65] PCI: dwc: all: Modify dbi accessors to access data of 4/2/1 bytes Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 54/65] PCI: dwc: designware: Move _unroll configurations to a separate function Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 55/65] PCI: dwc: designware: Test PCIE_ATU_ENABLE bit specifically Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 56/65] PCI: dwc: designware: Make dw_pcie_prog_*_atu_unroll() static Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 57/65] PCI: Fix typos and whitespace errors Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 58/65] PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 59/65] PCI: dwc: Replace lower into upper case characters Andrey Smirnov
2018-12-17 5:19 ` Andrey Smirnov [this message]
2018-12-17 5:19 ` [PATCH v2 61/65] PCI: dwc: Add accessors for write permission of DBI Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 62/65] PCI: dwc: Enable write permission for Class Code, Interrupt Pin updates Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 63/65] PCI: dwc: Fix enumeration end when reaching root subordinate Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 64/65] PCI: dwc: Small computation improvement Andrey Smirnov
2018-12-17 5:19 ` [PATCH v2 65/65] PCI: dwc: Constify dw_pcie_host_ops structures Andrey Smirnov
2019-01-07 22:55 ` [PATCH v2 00/65] PCI i.MX6/DesignWare sync up with 4.20-rc1 Andrey Smirnov
2019-01-08 15:31 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181217051925.17582-61-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox