From: Roland Hieber <r.hieber@pengutronix.de>
To: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v4 2/7] ARM: rpi: retrieve miniuart clock from firmware
Date: Tue, 18 Dec 2018 04:26:10 +0100 [thread overview]
Message-ID: <20181218032610.zpsxavqsbzswg3ry@pengutronix.de> (raw)
In-Reply-To: <39d36e54718c9c5c75175e3836de5425b1f73fb3.1545034218.git-series.r.czerwinski@pengutronix.de>
On Mon, Dec 17, 2018 at 09:10:40AM +0100, Rouven Czerwinski wrote:
> The miniuart uses the core clock as the clock source. This clock is fixed by the
> firmware to 250Mhz if enable_uart=1 is set in the config.txt file.
> However a user could still choose to overclock the core frequency,
> which would result in wrong baudrates computed by barebox.
> Retrieve the core clock frequency from the firmware to allow all potential
> firmware configurations to work with barebox.
>
> Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
> ---
> arch/arm/boards/raspberry-pi/rpi-common.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c b/arch/arm/boards/raspberry-pi/rpi-common.c
> index 490aeef..e29177d 100644
> --- a/arch/arm/boards/raspberry-pi/rpi-common.c
> +++ b/arch/arm/boards/raspberry-pi/rpi-common.c
> @@ -309,6 +309,13 @@ static int rpi_console_clock_init(void)
> clkdev_add_physbase(clk, 0x20201000, NULL);
> clkdev_add_physbase(clk, 0x3f201000, NULL);
>
> + clk = rpi_register_firmware_clock(BCM2835_MBOX_CLOCK_ID_CORE,
> + "uart1-8250");
> + if (IS_ERR(clk))
> + return PTR_ERR(clk);
> +
> + clkdev_add_physbase(clk, 0x3f215040, NULL);
This magic value could probably have an explaining comment somewhere
next to it.
- Roland
> +
> clk = clk_fixed("bcm2835-cs", 1 * 1000 * 1000);
> clk_register_clkdev(clk, NULL, "bcm2835-cs");
>
> --
> git-series 0.9.1
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Roland Hieber | r.hieber@pengutronix.de |
Pengutronix e.K. | https://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim | Phone: +49-5121-206917-5086 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2018-12-18 3:26 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-17 8:10 [PATCH v4 0/7] Raspberry Pi miniuart support Rouven Czerwinski
2018-12-17 8:10 ` [PATCH v4 1/7] ARM: rpi: move clks into board specific rpi-common Rouven Czerwinski
2018-12-17 8:10 ` [PATCH v4 2/7] ARM: rpi: retrieve miniuart clock from firmware Rouven Czerwinski
2018-12-18 3:26 ` Roland Hieber [this message]
2018-12-18 7:17 ` Sascha Hauer
2018-12-18 7:21 ` Sascha Hauer
2018-12-18 8:39 ` Rouven Czerwinski
2018-12-18 8:45 ` Sascha Hauer
2018-12-17 8:10 ` [PATCH v4 3/7] serial_ns16550: handle default reg-io-width Rouven Czerwinski
2018-12-17 8:10 ` [PATCH v4 4/7] serial_ns16550: add raspberry pi compatible and init Rouven Czerwinski
2018-12-18 3:29 ` Roland Hieber
2018-12-17 8:10 ` [PATCH v4 5/7] ARM: rpi: add NS16550 support Rouven Czerwinski
2018-12-17 8:10 ` [PATCH v4 6/7] ARM: rpi: choose miniuart as stdout Rouven Czerwinski
2018-12-17 8:10 ` [PATCH v4 7/7] doc: bcm283x: remove miniuart overlay instruction Rouven Czerwinski
2018-12-17 10:13 ` [PATCH v4 0/7] Raspberry Pi miniuart support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181218032610.zpsxavqsbzswg3ry@pengutronix.de \
--to=r.hieber@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=r.czerwinski@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox