* [PATCH V3 1/2] mfd: mc13892: MC13892_POWER_MISC bits revision
@ 2018-12-24 6:24 Alexander Shiyan
2018-12-24 6:24 ` [PATCH V3 2/2] ARM: CCMX51: Switch to multiimage support Alexander Shiyan
2019-01-03 9:41 ` [PATCH V3 1/2] mfd: mc13892: MC13892_POWER_MISC bits revision Sascha Hauer
0 siblings, 2 replies; 3+ messages in thread
From: Alexander Shiyan @ 2018-12-24 6:24 UTC (permalink / raw)
To: barebox
This patch revises the bits for register MC13892_POWER_MISC.
- Added definition for one missing bit (0).
- Changed the name for bit 21 for accordance with the datasheet.
- Updated affected board that uses these definitions.
- Replaced spaces with tabs for the remaining bits.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/boards/efika-mx-smartbook/board.c | 2 +-
include/mfd/mc13892.h | 23 ++++++++++++-----------
2 files changed, 13 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boards/efika-mx-smartbook/board.c b/arch/arm/boards/efika-mx-smartbook/board.c
index d7c5681db..ec41eb8c1 100644
--- a/arch/arm/boards/efika-mx-smartbook/board.c
+++ b/arch/arm/boards/efika-mx-smartbook/board.c
@@ -79,7 +79,7 @@ static void efikamx_power_init(struct mc13xxx *mc)
/* power up the system first */
mc13xxx_reg_write(mc, MC13892_REG_POWER_MISC,
- MC13892_POWER_MISC_PWUP);
+ MC13892_POWER_MISC_GPO4ADIN);
/* Set core voltage to 1.1V */
mc13xxx_reg_read(mc, MC13892_REG_SW_0, &val);
diff --git a/include/mfd/mc13892.h b/include/mfd/mc13892.h
index 8b522391b..e9a41ba21 100644
--- a/include/mfd/mc13892.h
+++ b/include/mfd/mc13892.h
@@ -182,17 +182,18 @@
#define MC13892_MODE_1_VSDMODE (1 << 20)
/* Reg Power misc */
-#define MC13892_POWER_MISC_GPO1EN (1 << 6)
-#define MC13892_POWER_MISC_GPO1STBY (1 << 7)
-#define MC13892_POWER_MISC_GPO2EN (1 << 8)
-#define MC13892_POWER_MISC_GPO2STBY (1 << 9)
-#define MC13892_POWER_MISC_GPO3EN (1 << 10)
-#define MC13892_POWER_MISC_GPO3STBY (1 << 11)
-#define MC13892_POWER_MISC_GPO4EN (1 << 12)
-#define MC13892_POWER_MISC_GPO4STBY (1 << 13)
-#define MC13892_POWER_MISC_PWGT1SPIEN (1 << 15)
-#define MC13892_POWER_MISC_PWGT2SPIEN (1 << 16)
-#define MC13892_POWER_MISC_PWUP (1 << 21)
+#define MC13892_POWER_MISC_REGSCPEN (1 << 0)
+#define MC13892_POWER_MISC_GPO1EN (1 << 6)
+#define MC13892_POWER_MISC_GPO1STBY (1 << 7)
+#define MC13892_POWER_MISC_GPO2EN (1 << 8)
+#define MC13892_POWER_MISC_GPO2STBY (1 << 9)
+#define MC13892_POWER_MISC_GPO3EN (1 << 10)
+#define MC13892_POWER_MISC_GPO3STBY (1 << 11)
+#define MC13892_POWER_MISC_GPO4EN (1 << 12)
+#define MC13892_POWER_MISC_GPO4STBY (1 << 13)
+#define MC13892_POWER_MISC_PWGT1SPIEN (1 << 15)
+#define MC13892_POWER_MISC_PWGT2SPIEN (1 << 16)
+#define MC13892_POWER_MISC_GPO4ADIN (1 << 21)
/* Reg Power Control 2*/
#define MC13892_POWER_CONTROL_2_WDIRESET (1 << 12)
--
2.13.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH V3 2/2] ARM: CCMX51: Switch to multiimage support
2018-12-24 6:24 [PATCH V3 1/2] mfd: mc13892: MC13892_POWER_MISC bits revision Alexander Shiyan
@ 2018-12-24 6:24 ` Alexander Shiyan
2019-01-03 9:41 ` [PATCH V3 1/2] mfd: mc13892: MC13892_POWER_MISC bits revision Sascha Hauer
1 sibling, 0 replies; 3+ messages in thread
From: Alexander Shiyan @ 2018-12-24 6:24 UTC (permalink / raw)
To: barebox
This is a cumulative patch for the Digi ConnectCore CCMX51 SOM.
It includes:
- Switch board to devicetree probe.
- Add MMC update handler.
- Switch to multiimage support.
- Cleanup and optimize board code.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/Makefile | 1 -
arch/arm/boards/ccxmx51/Makefile | 4 +-
arch/arm/boards/ccxmx51/ccxmx51.c | 626 +++++++--------------
arch/arm/boards/ccxmx51/ccxmx51.h | 35 --
arch/arm/boards/ccxmx51/ccxmx51js.c | 103 ----
.../ccxmx51/{env => defaultenv-ccxmx51}/boot/nand | 0
.../{env => defaultenv-ccxmx51}/nv/boot.default | 0
arch/arm/boards/ccxmx51/env/init/mtdparts-nand | 6 -
arch/arm/boards/ccxmx51/env/nv/autoboot_timeout | 1 -
arch/arm/boards/ccxmx51/lowlevel.c | 15 +-
arch/arm/configs/ccmx51_defconfig | 60 --
arch/arm/configs/imx_v7_defconfig | 2 +-
arch/arm/dts/Makefile | 1 +
arch/arm/dts/imx51-ccxmx51.dts | 41 ++
arch/arm/mach-imx/Kconfig | 31 +-
images/Makefile.imx | 5 +
16 files changed, 288 insertions(+), 643 deletions(-)
delete mode 100644 arch/arm/boards/ccxmx51/ccxmx51.h
delete mode 100644 arch/arm/boards/ccxmx51/ccxmx51js.c
rename arch/arm/boards/ccxmx51/{env => defaultenv-ccxmx51}/boot/nand (100%)
rename arch/arm/boards/ccxmx51/{env => defaultenv-ccxmx51}/nv/boot.default (100%)
delete mode 100644 arch/arm/boards/ccxmx51/env/init/mtdparts-nand
delete mode 100644 arch/arm/boards/ccxmx51/env/nv/autoboot_timeout
delete mode 100644 arch/arm/configs/ccmx51_defconfig
create mode 100644 arch/arm/dts/imx51-ccxmx51.dts
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 5db67b9db..2d55bc69a 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -246,7 +246,6 @@ barebox.imximg: $(KBUILD_BINARY) FORCE
boarddir = $(srctree)/arch/arm/boards
imxcfg-$(CONFIG_MACH_FREESCALE_MX53_SMD) += $(boarddir)/freescale-mx53-smd/flash-header.imxcfg
-imxcfg-$(CONFIG_MACH_CCMX51) += $(boarddir)/ccxmx51/flash-header.imxcfg
imxcfg-$(CONFIG_MACH_TX51) += $(boarddir)/karo-tx51/flash-header-karo-tx51.imxcfg
imxcfg-$(CONFIG_MACH_GUF_VINCELL) += $(boarddir)/guf-vincell/flash-header.imxcfg
imxcfg-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += $(boarddir)/eukrea_cpuimx51/flash-header.imxcfg
diff --git a/arch/arm/boards/ccxmx51/Makefile b/arch/arm/boards/ccxmx51/Makefile
index 6ba98b12d..50cf929c5 100644
--- a/arch/arm/boards/ccxmx51/Makefile
+++ b/arch/arm/boards/ccxmx51/Makefile
@@ -1,3 +1,3 @@
obj-y += ccxmx51.o
-lwl-y += lowlevel.o
-obj-$(CONFIG_MACH_CCMX51_BASEBOARD) += ccxmx51js.o
+lwl-y += lowlevel.o
+bbenv-$(CONFIG_DEFAULT_ENVIRONMENT) += defaultenv-ccxmx51
diff --git a/arch/arm/boards/ccxmx51/ccxmx51.c b/arch/arm/boards/ccxmx51/ccxmx51.c
index 71a51e192..13fba51fe 100644
--- a/arch/arm/boards/ccxmx51/ccxmx51.c
+++ b/arch/arm/boards/ccxmx51/ccxmx51.c
@@ -1,477 +1,279 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2009-2010 Digi International, Inc.
* Copyright (C) 2007 Sascha Hauer, Pengutronix
* (c) 2011 Eukrea Electromatique, Eric Bénard <eric@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
+ * Modified for barebox by Alexander Shiyan <shc_work@mail.ru>
*/
#include <common.h>
-#include <net.h>
+#include <envfs.h>
#include <init.h>
-#include <environment.h>
-#include <mach/imx51-regs.h>
-#include <platform_data/eth-fec.h>
+#include <net.h>
+#include <notifier.h>
#include <asm/armlinux.h>
-#include <generated/mach-types.h>
-#include <partition.h>
-#include <fs.h>
-#include <fcntl.h>
#include <linux/sizes.h>
-#include <nand.h>
-#include <notifier.h>
-#include <spi/spi.h>
#include <mfd/mc13xxx.h>
-#include <asm/io.h>
-#include <mach/imx-nand.h>
-#include <mach/spi.h>
-#include <mach/generic.h>
-#include <mach/iomux-mx51.h>
-#include <mach/devices-imx51.h>
+#include <mfd/mc13892.h>
+
+#include <mach/bbu.h>
+#include <mach/esdctl.h>
#include <mach/iim.h>
-#include <mach/clock-imx51_53.h>
#include <mach/imx5.h>
+#include <mach/imx51-regs.h>
#include <mach/revision.h>
-#include <mach/esdctl.h>
-
-#include "ccxmx51.h"
-
-static struct ccxmx51_ident ccxmx51_ids[] = {
-/* 0x00 */ { "Unknown", 0, 0, 0, 0, 0 },
-/* 0x01 */ { "Not supported", 0, 0, 0, 0, 0 },
-/* 0x02 */ { "i.MX515@800MHz, Wireless, PHY, Ext. Eth, Accel", SZ_512M, 0, 1, 1, 1 },
-/* 0x03 */ { "i.MX515@800MHz, PHY, Ext. Eth, Accel", SZ_512M, 0, 1, 1, 0 },
-/* 0x04 */ { "i.MX515@600MHz, Wireless, PHY, Ext. Eth, Accel", SZ_512M, 1, 1, 1, 1 },
-/* 0x05 */ { "i.MX515@600MHz, PHY, Ext. Eth, Accel", SZ_512M, 1, 1, 1, 0 },
-/* 0x06 */ { "i.MX515@800MHz, Wireless, PHY, Accel", SZ_512M, 0, 1, 0, 1 },
-/* 0x07 */ { "i.MX515@800MHz, PHY, Accel", SZ_512M, 0, 1, 0, 0 },
-/* 0x08 */ { "i.MX515@800MHz, Wireless, PHY, Accel", SZ_256M, 0, 1, 0, 1 },
-/* 0x09 */ { "i.MX515@800MHz, PHY, Accel", SZ_256M, 0, 1, 0, 0 },
-/* 0x0a */ { "i.MX515@600MHz, Wireless, PHY, Accel", SZ_256M, 1, 1, 0, 1 },
-/* 0x0b */ { "i.MX515@600MHz, PHY, Accel", SZ_256M, 1, 1, 0, 0 },
-/* 0x0c */ { "i.MX515@800MHz, Wireless, PHY, Accel", SZ_128M, 0, 1, 0, 1 },
-/* 0x0d */ { "i.MX512@800MHz", SZ_128M, 0, 0, 0, 0 },
-/* 0x0e */ { "i.MX515@800MHz, Wireless, PHY, Accel", SZ_512M, 0, 1, 0, 1 },
-/* 0x0f */ { "i.MX515@600MHz, PHY, Accel", SZ_128M, 1, 1, 0, 0 },
-/* 0x10 */ { "i.MX515@600MHz, Wireless, PHY, Accel", SZ_128M, 1, 1, 0, 1 },
-/* 0x11 */ { "i.MX515@800MHz, PHY, Accel", SZ_128M, 0, 1, 0, 0 },
-/* 0x12 */ { "i.MX515@600MHz, Wireless, PHY, Accel", SZ_512M, 1, 1, 0, 1 },
-/* 0x13 */ { "i.MX515@800MHz, PHY, Accel", SZ_512M, 0, 1, 0, 0 },
-};
-
-struct ccxmx51_ident *ccxmx51_id;
-
-struct imx_nand_platform_data nand_info = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-static struct fec_platform_data fec_info = {
- .xcv_type = PHY_INTERFACE_MODE_MII,
- .phy_addr = 7,
-};
-static iomux_v3_cfg_t ccxmx51_pads[] = {
- /* UART1 */
- MX51_PAD_UART1_RXD__UART1_RXD,
- MX51_PAD_UART1_TXD__UART1_TXD,
- /* UART2 */
- MX51_PAD_UART2_RXD__UART2_RXD,
- MX51_PAD_UART2_TXD__UART2_TXD,
- /* UART3 */
- MX51_PAD_UART3_RXD__UART3_RXD,
- MX51_PAD_UART3_TXD__UART3_TXD,
- /* I2C2 */
- MX51_PAD_GPIO1_2__I2C2_SCL,
- MX51_PAD_GPIO1_3__I2C2_SDA,
- /* eCSPI1 */
- MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
- MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
- MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
- MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
- MX51_PAD_CSPI1_SS0__ECSPI1_SS0,
- MX51_PAD_CSPI1_SS1__ECSPI1_SS1,
- /* FEC */
- MX51_PAD_DISP2_DAT14__FEC_RDATA0,
- MX51_PAD_DI2_DISP_CLK__FEC_RDATA1,
- MX51_PAD_DI_GP4__FEC_RDATA2,
- MX51_PAD_DISP2_DAT0__FEC_RDATA3,
- MX51_PAD_DISP2_DAT15__FEC_TDATA0,
- MX51_PAD_DISP2_DAT6__FEC_TDATA1,
- MX51_PAD_DISP2_DAT7__FEC_TDATA2,
- MX51_PAD_DISP2_DAT8__FEC_TDATA3,
- MX51_PAD_DISP2_DAT9__FEC_TX_EN,
- MX51_PAD_DISP2_DAT10__FEC_COL,
- MX51_PAD_DISP2_DAT11__FEC_RX_CLK,
- MX51_PAD_DISP2_DAT12__FEC_RX_DV,
- MX51_PAD_DISP2_DAT13__FEC_TX_CLK,
- MX51_PAD_DI2_PIN2__FEC_MDC,
- MX51_PAD_DI2_PIN4__FEC_CRS,
- MX51_PAD_DI2_PIN3__FEC_MDIO,
- MX51_PAD_DI_GP3__FEC_TX_ER,
- MX51_PAD_DISP2_DAT1__FEC_RX_ER,
- /* WEIM */
- MX51_PAD_EIM_DA0__EIM_DA0,
- MX51_PAD_EIM_DA1__EIM_DA1,
- MX51_PAD_EIM_DA2__EIM_DA2,
- MX51_PAD_EIM_DA3__EIM_DA3,
- MX51_PAD_EIM_DA4__EIM_DA4,
- MX51_PAD_EIM_DA5__EIM_DA5,
- MX51_PAD_EIM_DA6__EIM_DA6,
- MX51_PAD_EIM_DA7__EIM_DA7,
- MX51_PAD_EIM_D16__EIM_D16,
- MX51_PAD_EIM_D17__EIM_D17,
- MX51_PAD_EIM_D18__EIM_D18,
- MX51_PAD_EIM_D19__EIM_D19,
- MX51_PAD_EIM_D20__EIM_D20,
- MX51_PAD_EIM_D21__EIM_D21,
- MX51_PAD_EIM_D22__EIM_D22,
- MX51_PAD_EIM_D23__EIM_D23,
- MX51_PAD_EIM_D24__EIM_D24,
- MX51_PAD_EIM_D25__EIM_D25,
- MX51_PAD_EIM_D26__EIM_D26,
- MX51_PAD_EIM_D27__EIM_D27,
- MX51_PAD_EIM_D28__EIM_D28,
- MX51_PAD_EIM_D29__EIM_D29,
- MX51_PAD_EIM_D30__EIM_D30,
- MX51_PAD_EIM_D31__EIM_D31,
- MX51_PAD_EIM_OE__EIM_OE,
- MX51_PAD_EIM_CS5__EIM_CS5,
- /* NAND */
- MX51_PAD_NANDF_D0__NANDF_D0,
- MX51_PAD_NANDF_D1__NANDF_D1,
- MX51_PAD_NANDF_D2__NANDF_D2,
- MX51_PAD_NANDF_D3__NANDF_D3,
- MX51_PAD_NANDF_D4__NANDF_D4,
- MX51_PAD_NANDF_D5__NANDF_D5,
- MX51_PAD_NANDF_D6__NANDF_D6,
- MX51_PAD_NANDF_D7__NANDF_D7,
- MX51_PAD_NANDF_ALE__NANDF_ALE,
- MX51_PAD_NANDF_CLE__NANDF_CLE,
- MX51_PAD_NANDF_RE_B__NANDF_RE_B,
- MX51_PAD_NANDF_WE_B__NANDF_WE_B,
- MX51_PAD_NANDF_WP_B__NANDF_WP_B,
- MX51_PAD_NANDF_CS0__NANDF_CS0,
- MX51_PAD_NANDF_RB0__NANDF_RB0,
- /* LAN9221 IRQ (GPIO1.9) */
- MX51_PAD_GPIO1_9__GPIO1_9,
- /* MC13892 IRQ (GPIO1.5) */
- MX51_PAD_GPIO1_5__GPIO1_5,
- /* MMA7455LR IRQ1 (GPIO1.7) */
- MX51_PAD_GPIO1_7__GPIO1_7,
- /* MMA7455LR IRQ2 (GPIO1.6) */
- MX51_PAD_GPIO1_6__GPIO1_6,
- /* User GPIOs */
- MX51_PAD_GPIO1_0__GPIO1_0,
- MX51_PAD_GPIO1_1__GPIO1_1,
- MX51_PAD_GPIO1_8__GPIO1_8,
- MX51_PAD_DI1_PIN11__GPIO3_0,
- MX51_PAD_DI1_PIN12__GPIO3_1,
- MX51_PAD_DI1_PIN13__GPIO3_2,
- MX51_PAD_DI1_D0_CS__GPIO3_3,
- MX51_PAD_DI1_D1_CS__GPIO3_4,
- MX51_PAD_DISPB2_SER_DIN__GPIO3_5,
- MX51_PAD_DISPB2_SER_DIO__GPIO3_6,
- MX51_PAD_DISPB2_SER_CLK__GPIO3_7,
- MX51_PAD_DISPB2_SER_RS__GPIO3_8,
- MX51_PAD_NANDF_RB1__GPIO3_9,
- MX51_PAD_NANDF_RB2__GPIO3_10,
- MX51_PAD_NANDF_RB3__GPIO3_11,
- MX51_PAD_CSI1_D8__GPIO3_12,
- MX51_PAD_CSI1_D9__GPIO3_13,
- MX51_PAD_NANDF_CS1__GPIO3_17,
- MX51_PAD_NANDF_CS2__GPIO3_18,
- MX51_PAD_NANDF_CS3__GPIO3_19,
- MX51_PAD_NANDF_CS4__GPIO3_20,
- MX51_PAD_NANDF_CS5__GPIO3_21,
- MX51_PAD_NANDF_CS6__GPIO3_22,
+static const struct ccxmx_ident {
+ char *id_string;
+ unsigned int mem_sz;
+ unsigned int cpu_mhz;
+ unsigned char eth0:1;
+ unsigned char eth1:1;
+ unsigned char wless:1;
+ unsigned char accel:1;
+} *ccxmx_id, ccxmx51_ids[] = {
+ [0x00] = { NULL /* Unknown */, 0, 0, 0, 0, 0, 0 },
+ [0x01] = { NULL /* Not supported */, 0, 0, 0, 0, 0, 0 },
+ [0x02] = { "i.MX515@800MHz, Wireless, PHY, Ext. Eth, Accel", SZ_512M, 800, 1, 1, 1, 1 },
+ [0x03] = { "i.MX515@800MHz, PHY, Ext. Eth, Accel", SZ_512M, 800, 1, 1, 0, 1 },
+ [0x04] = { "i.MX515@600MHz, Wireless, PHY, Ext. Eth, Accel", SZ_512M, 600, 1, 1, 1, 1 },
+ [0x05] = { "i.MX515@600MHz, PHY, Ext. Eth, Accel", SZ_512M, 600, 1, 1, 0, 1 },
+ [0x06] = { "i.MX515@800MHz, Wireless, PHY, Accel", SZ_512M, 800, 1, 0, 1, 1 },
+ [0x07] = { "i.MX515@800MHz, PHY, Accel", SZ_512M, 800, 1, 0, 0, 1 },
+ [0x08] = { "i.MX515@800MHz, Wireless, PHY, Accel", SZ_256M, 800, 1, 0, 1, 1 },
+ [0x09] = { "i.MX515@800MHz, PHY, Accel", SZ_256M, 800, 1, 0, 0, 1 },
+ [0x0a] = { "i.MX515@600MHz, Wireless, PHY, Accel", SZ_256M, 600, 1, 0, 1, 1 },
+ [0x0b] = { "i.MX515@600MHz, PHY, Accel", SZ_256M, 600, 1, 0, 0, 1 },
+ [0x0c] = { "i.MX515@800MHz, Wireless, PHY, Accel", SZ_128M, 800, 1, 0, 1, 1 },
+ [0x0d] = { "i.MX512@800MHz", SZ_128M, 800, 0, 0, 0, 0 },
+ [0x0e] = { "i.MX515@800MHz, Wireless, PHY, Accel", SZ_512M, 800, 1, 0, 1, 1 },
+ [0x0f] = { "i.MX515@600MHz, PHY, Accel", SZ_128M, 600, 1, 0, 0, 1 },
+ [0x10] = { "i.MX515@600MHz, Wireless, PHY, Accel", SZ_128M, 600, 1, 0, 1, 1 },
+ [0x11] = { "i.MX515@800MHz, PHY, Accel", SZ_128M, 800, 1, 0, 0, 1 },
+ [0x12] = { "i.MX515@600MHz, Wireless, PHY, Accel", SZ_512M, 600, 1, 0, 1, 1 },
+ [0x13] = { "i.MX515@800MHz, PHY, Accel", SZ_512M, 800, 1, 0, 0, 1 },
};
-#define CCXMX51_ECSPI1_CS0 IMX_GPIO_NR(4, 24)
-#define CCXMX51_ECSPI1_CS1 IMX_GPIO_NR(4, 25)
+static u32 boardserial;
-static int ecspi_0_cs[] = { CCXMX51_ECSPI1_CS0, CCXMX51_ECSPI1_CS1, };
-
-static struct spi_imx_master ecspi_0_data = {
- .chipselect = ecspi_0_cs,
- .num_chipselect = ARRAY_SIZE(ecspi_0_cs),
-};
-
-static const struct spi_board_info ccxmx51_spi_board_info[] = {
- {
- .name = "mc13892",
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-static struct imxusb_platformdata ccxmx51_otg_pdata = {
- .flags = MXC_EHCI_MODE_UTMI_16_BIT | MXC_EHCI_POWER_PINS_ENABLED,
- .mode = IMX_USB_MODE_HOST,
-};
-
-static int ccxmx51_power_init(void)
+static void ccxmx51_power_init(struct mc13xxx *mc13xxx)
{
- struct mc13xxx *mc13xxx_dev;
u32 val;
- mc13xxx_dev = mc13xxx_get();
- if (!mc13xxx_dev)
- return -ENODEV;
-
- mc13xxx_reg_read(mc13xxx_dev, MC13892_REG_POWER_MISC, &val);
- /* Reset devices by clearing GP01-GPO4 */
- val &= ~((1 << 21) | (3 << 12) | (3 << 10) | (3 << 8) | (3 << 6));
- /* Switching off the PWGT1SPIEN */
- val |= (1 << 15);
- /* Switching on the PWGT2SPIEN */
- val &= ~(1 << 16);
- /* Enable short circuit protection */
- val |= (1 << 0);
- mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_POWER_MISC, val);
-
- /* Allow charger to charge (4.2V and 560mA) */
- val = 0x238033;
- mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_CHARGE, val);
-
- if (imx_silicon_revision() < IMX_CHIP_REV_3_0) {
- /* Set core voltage (SW1) to 1.1V */
- mc13xxx_reg_read(mc13xxx_dev, MC13892_REG_SW_0, &val);
- val &= ~0x00001f;
- val |= 0x000014;
- mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_SW_0, val);
-
- /* Setup VCC (SW2) to 1.25 */
- mc13xxx_reg_read(mc13xxx_dev, MC13892_REG_SW_1, &val);
- val &= ~0x00001f;
- val |= 0x00001a;
- mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_SW_1, val);
-
- /* Setup 1V2_DIG1 (SW3) to 1.25 */
- mc13xxx_reg_read(mc13xxx_dev, MC13892_REG_SW_2, &val);
- val &= ~0x00001f;
- val |= 0x00001a;
- mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_SW_2, val);
- } else {
- /* Setup VCC (SW2) to 1.225 */
- mc13xxx_reg_read(mc13xxx_dev, MC13892_REG_SW_1, &val);
- val &= ~0x00001f;
- val |= 0x000019;
- mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_SW_1, val);
-
- /* Setup 1V2_DIG1 (SW3) to 1.2 */
- mc13xxx_reg_read(mc13xxx_dev, MC13892_REG_SW_2, &val);
- val &= ~0x00001f;
- val |= 0x000018;
- mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_SW_2, val);
- }
-
- if (mc13xxx_revision(mc13xxx_dev) <= MC13892_REVISION_2_0) {
- /* Set switchers in PWM mode for Atlas 2.0 and lower */
- /* Setup the switcher mode for SW1 & SW2*/
- mc13xxx_reg_read(mc13xxx_dev, MC13892_REG_SW_4, &val);
- val &= ~0x003c0f;
- val |= 0x001405;
- mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_SW_4, val);
-
- /* Setup the switcher mode for SW3 & SW4 */
- mc13xxx_reg_read(mc13xxx_dev, MC13892_REG_SW_5, &val);
- val &= ~0x000f0f;
- val |= 0x000505;
- mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_SW_5, val);
- } else {
- /* Set switchers in Auto in NORMAL mode & STANDBY mode for Atlas 2.0a */
- /* Setup the switcher mode for SW1 & SW2*/
- mc13xxx_reg_read(mc13xxx_dev, MC13892_REG_SW_4, &val);
- val &= ~0x003c0f;
- val |= 0x002008;
- mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_SW_4, val);
-
- /* Setup the switcher mode for SW3 & SW4 */
- mc13xxx_reg_read(mc13xxx_dev, MC13892_REG_SW_5, &val);
- val &= ~0x000f0f;
- val |= 0x000808;
- mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_SW_5, val);
- }
-
- /* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */
- mc13xxx_reg_read(mc13xxx_dev, MC13892_REG_SETTING_1, &val);
- val &= ~0x0001fc;
- val |= 0x0001f4;
- mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_SETTING_1, val);
+ /* Clear GP01-GPO4, enable short circuit protection, PWGT1SPIEN off */
+ val = MC13892_POWER_MISC_REGSCPEN | MC13892_POWER_MISC_PWGT1SPIEN;
+ val |= MC13892_POWER_MISC_GPO4ADIN;
+ mc13xxx_reg_write(mc13xxx, MC13892_REG_POWER_MISC, val);
+
+ /* Set ICHRG in externally powered mode, 4.2V, Disable thermistor */
+ mc13xxx_reg_write(mc13xxx, MC13892_REG_CHARGE, 0xa3827b);
+
+ /* Set core voltage (SW1) to 1.1V NORMAL, 1.05V STANDBY */
+ mc13xxx_reg_read(mc13xxx, MC13892_REG_SW_0, &val);
+ val &= ~(MC13892_SWx_SWx_VOLT_MASK << MC13892_SWMODE1_SHIFT);
+ val |= MC13892_SWx_SWx_1_100V << MC13892_SWMODE1_SHIFT;
+ val &= ~(MC13892_SWx_SWx_VOLT_MASK << MC13892_SWMODE2_SHIFT);
+ val |= MC13892_SWx_SWx_1_050V << MC13892_SWMODE2_SHIFT;
+ mc13xxx_reg_write(mc13xxx, MC13892_REG_SW_0, val);
+
+ /* Setup VCC (SW2) to 1.225 NORMAL, 1.175V STANDBY */
+ mc13xxx_reg_read(mc13xxx, MC13892_REG_SW_1, &val);
+ val &= ~(MC13892_SWx_SWx_VOLT_MASK << MC13892_SWMODE1_SHIFT);
+ val |= MC13892_SWx_SWx_1_225V << MC13892_SWMODE1_SHIFT;
+ val &= ~(MC13892_SWx_SWx_VOLT_MASK << MC13892_SWMODE2_SHIFT);
+ val |= MC13892_SWx_SWx_1_175V << MC13892_SWMODE2_SHIFT;
+ mc13xxx_reg_write(mc13xxx, MC13892_REG_SW_1, val);
+
+ /* Setup 1V2_DIG1 (SW3) to 1.2 NORMAL, 1.15V STANDBY */
+ mc13xxx_reg_read(mc13xxx, MC13892_REG_SW_2, &val);
+ val &= ~(MC13892_SWx_SWx_VOLT_MASK << MC13892_SWMODE1_SHIFT);
+ val |= MC13892_SWx_SWx_1_200V << MC13892_SWMODE1_SHIFT;
+ val &= ~(MC13892_SWx_SWx_VOLT_MASK << MC13892_SWMODE2_SHIFT);
+ val |= MC13892_SWx_SWx_1_150V << MC13892_SWMODE2_SHIFT;
+ mc13xxx_reg_write(mc13xxx, MC13892_REG_SW_2, val);
+
+ /* Set SW1-SW4 switcher in Auto in NORMAL & STANDBY mode */
+ mc13xxx_reg_read(mc13xxx, MC13892_REG_SW_4, &val);
+ val &= ~(MC13892_SWMODE_MASK << MC13892_SWMODE1_SHIFT);
+ val |= MC13892_SWMODE_AUTO_AUTO << MC13892_SWMODE1_SHIFT;
+ val &= ~(MC13892_SWMODE_MASK << MC13892_SWMODE2_SHIFT);
+ val |= MC13892_SWMODE_AUTO_AUTO << MC13892_SWMODE2_SHIFT;
+ /* Disable current limit */
+ val |= 1 << 22;
+ mc13xxx_reg_write(mc13xxx, MC13892_REG_SW_4, val);
+
+ mc13xxx_reg_read(mc13xxx, MC13892_REG_SW_5, &val);
+ val &= ~(MC13892_SWMODE_MASK << MC13892_SWMODE3_SHIFT);
+ val |= MC13892_SWMODE_AUTO_AUTO << MC13892_SWMODE3_SHIFT;
+ val &= ~(MC13892_SWMODE_MASK << MC13892_SWMODE4_SHIFT);
+ val |= MC13892_SWMODE_AUTO_AUTO << MC13892_SWMODE4_SHIFT;
+ /* Enable SWBST */
+ val |= 1 << 20;
+ mc13xxx_reg_write(mc13xxx, MC13892_REG_SW_5, val);
+
+ /* Set VVIDEO=2.775V, VAUDIO=3V, VSD=3.15V */
+ val = MC13892_SETTING_1_VVIDEO_2_775 | MC13892_SETTING_1_VAUDIO_3_0;
+ val |= MC13892_SETTING_1_VSD_3_15;
+ mc13xxx_reg_write(mc13xxx, MC13892_REG_SETTING_1, val);
/* Configure VGEN3 and VCAM regulators to use external PNP */
- val = 0x000208;
- mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_MODE_1, val);
+ val = MC13892_MODE_1_VGEN3CONFIG | MC13892_MODE_1_VCAMCONFIG;
+ mc13xxx_reg_write(mc13xxx, MC13892_REG_MODE_1, val);
udelay(200);
- /* Set VGEN3 to 1.8V */
- mc13xxx_reg_read(mc13xxx_dev, MC13892_REG_SETTING_0, &val);
- val &= ~(1 << 14);
- mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_SETTING_0, val);
+ /* Set VGEN2=3.15V, VGEN3=1.8V, VDIG=1.25V, VCAM=2.75V */
+ mc13xxx_reg_read(mc13xxx, MC13892_REG_SETTING_0, &val);
+ val &= ~(MC13892_SETTING_0_VGEN2_MASK | MC13892_SETTING_0_VGEN3_MASK);
+ val |= MC13892_SETTING_0_VGEN2_3_15 | MC13892_SETTING_0_VGEN3_1_8;
+ val &= ~(MC13892_SETTING_0_VDIG_MASK | MC13892_SETTING_0_VCAM_MASK);
+ val |= MC13892_SETTING_0_VDIG_1_25 | MC13892_SETTING_0_VCAM_2_75;
+ mc13xxx_reg_write(mc13xxx, MC13892_REG_SETTING_0, val);
- /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
- val = 0x049249;
- mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_MODE_1, val);
+ /* Enable OTG function */
+ mc13xxx_reg_write(mc13xxx, MC13892_REG_USB1, 0x409);
- /* Enable USB1 charger */
- val = 0x000409;
- mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_USB1, val);
-
- /* Set VCOIN to 3.0V and Enable It */
- mc13xxx_reg_read(mc13xxx_dev, MC13892_REG_POWER_CTL0, &val);
+ /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
+ val = MC13892_MODE_1_VGEN3EN | MC13892_MODE_1_VGEN3CONFIG;
+ val |= MC13892_MODE_1_VCAMEN | MC13892_MODE_1_VCAMCONFIG;
+ val |= MC13892_MODE_1_VVIDEOEN | MC13892_MODE_1_VAUDIOEN;
+ val |= MC13892_MODE_1_VSDEN;
+ mc13xxx_reg_write(mc13xxx, MC13892_REG_MODE_1, val);
+
+ /* Set VCOIN=3.0V, Keeps VSRTC and CLK32KMCU */
+ mc13xxx_reg_read(mc13xxx, MC13892_REG_POWER_CTL0, &val);
val &= ~(7 << 20);
- val |= (4 << 20) | (1 << 23);
- mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_POWER_CTL0, val);
- /* Keeps VSRTC and CLK32KMCU */
- val |= (1 << 4);
- mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_POWER_CTL0, val);
-
- /* De-assert reset of external devices on GP01, GPO2, GPO3 and GPO4 */
- mc13xxx_reg_read(mc13xxx_dev, MC13892_REG_POWER_MISC, &val);
+ val |= (1 << 4) | (4 << 20) | (1 << 23);
+ mc13xxx_reg_write(mc13xxx, MC13892_REG_POWER_CTL0, val);
+
+ /* De-assert reset of external devices on GP01-GPO4 */
+ mc13xxx_reg_read(mc13xxx, MC13892_REG_POWER_MISC, &val);
/* GPO1 - External */
/* GP02 - LAN9221 Power */
/* GP03 - FEC Reset */
/* GP04 - Wireless Power */
- if (IS_ENABLED(CONFIG_DRIVER_NET_SMC911X) && ccxmx51_id->eth1) {
- val |= (1 << 8);
- mdelay(50);
+ if (ccxmx_id->eth1) {
+ val |= MC13892_POWER_MISC_GPO2EN;
+ mdelay(100);
}
- if (IS_ENABLED(CONFIG_DRIVER_NET_FEC_IMX) && ccxmx51_id->eth0)
- val |= (1 << 10);
- if (ccxmx51_id->wless)
- val |= (1 << 12);
- mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_POWER_MISC, val);
+ if (ccxmx_id->eth0)
+ val |= MC13892_POWER_MISC_GPO3EN;
+ if (ccxmx_id->wless)
+ val |= MC13892_POWER_MISC_GPO4EN;
+ mc13xxx_reg_write(mc13xxx, MC13892_REG_POWER_MISC, val);
udelay(100);
- return 0;
+ console_flush();
+ imx51_init_lowlevel(ccxmx_id->cpu_mhz);
+ clock_notifier_call_chain();
+
+ printf("MC13892 PMIC initialized.\n");
}
-/*
- * On this board the SDRAM is always configured for 512Mib. The real
- * size is determined by the board id read from the IIM module.
- */
-static int ccxmx51_sdram_fixup(void)
+static void ccxmx51_disable_device(struct device_node *root, const char *label)
{
- imx_esdctl_disable();
+ struct device_node *np = of_find_node_by_name(root, label);
+ if (np)
+ of_device_disable(np);
+}
+
+static int ccxmx51_board_fixup(struct device_node *root, void *unused)
+{
+ char *serial;
+
+ if (!ccxmx_id->accel)
+ ccxmx51_disable_device(root, "mma7455l@1d");
+
+ if (!ccxmx_id->eth0)
+ ccxmx51_disable_device(root, "ethernet@83fec000");
+
+ if (!ccxmx_id->eth1)
+ ccxmx51_disable_device(root, "lan9221@5,0");
+
+ if (!ccxmx_id->wless)
+ ccxmx51_disable_device(root, "esdhc@70008000");
+
+ serial = basprintf("%08x%08x", 0, boardserial);
+ of_set_property(root, "serial-number", serial, strlen(serial) + 1, 1);
+ free(serial);
return 0;
}
-postcore_initcall(ccxmx51_sdram_fixup);
-static int ccxmx51_memory_init(void)
+static __init int ccxmx51_is_compatible(void)
{
+ return of_machine_is_compatible("digi,connectcore-ccxmx51-som");
+}
+
+static __init int ccxmx51_sdram_fixup(void)
+{
+ if (!ccxmx51_is_compatible())
+ return 0;
+
arm_add_mem_device("ram0", MX51_CSD0_BASE_ADDR, SZ_128M);
+ /*
+ * On this board the SDRAM is always configured for 512Mib. The real
+ * size is determined by the board id read from the IIM module.
+ */
+ imx_esdctl_disable();
+
+ of_register_fixup(ccxmx51_board_fixup, NULL);
+
return 0;
}
-mem_initcall(ccxmx51_memory_init);
+postcore_initcall(ccxmx51_sdram_fixup);
-static int ccxmx51_devices_init(void)
+static __init int ccxmx51_init(void)
{
+ char manloc = 'N';
u8 hwid[6];
- int pwr;
- char manloc;
-
- if ((imx_iim_read(1, 9, hwid, sizeof(hwid)) != sizeof(hwid)) || (hwid[0] < 0x02) || (hwid[0] >= ARRAY_SIZE(ccxmx51_ids)))
- memset(hwid, 0x00, sizeof(hwid));
-
- ccxmx51_id = &ccxmx51_ids[hwid[0]];
- printf("Module Variant: %s (0x%02x)\n", ccxmx51_id->id_string, hwid[0]);
-
- if (hwid[0]) {
- printf("Module HW Rev : %02x\n", hwid[1] + 1);
- switch (hwid[2] & 0xc0) {
- case 0x00:
- manloc = 'B';
- break;
- case 0x40:
- manloc = 'W';
- break;
- case 0x80:
- manloc = 'S';
- break;
- default:
- manloc = 'N';
- break;
- }
- printf("Module Serial : %c%d\n", manloc, ((hwid[2] & 0x3f) << 24) | (hwid[3] << 16) | (hwid[4] << 8) | hwid[5]);
- if ((ccxmx51_id->mem_sz - SZ_128M) > 0)
- arm_add_mem_device("ram1", MX51_CSD0_BASE_ADDR + SZ_128M, ccxmx51_id->mem_sz - SZ_128M);
- } else
- return -ENOSYS;
-
- imx51_add_uart1();
- imx51_add_uart2();
-
- spi_register_board_info(ccxmx51_spi_board_info, ARRAY_SIZE(ccxmx51_spi_board_info));
- imx51_add_spi0(&ecspi_0_data);
-
- pwr = ccxmx51_power_init();
- console_flush();
- imx51_init_lowlevel((ccxmx51_id->industrial || pwr) ? 600 : 800);
- clock_notifier_call_chain();
- if (pwr)
- printf("Could not setup PMIC. Clocks not adjusted.\n");
- imx51_add_i2c1(NULL);
+ if (!ccxmx51_is_compatible())
+ return 0;
- imx51_add_nand(&nand_info);
- devfs_add_partition("nand0", 0x00000, 0x80000, DEVFS_PARTITION_FIXED, "self_raw");
- dev_add_bb_dev("self_raw", "self0");
- devfs_add_partition("nand0", 0x80000, 0x40000, DEVFS_PARTITION_FIXED, "env_raw");
- dev_add_bb_dev("env_raw", "env0");
-
- if (IS_ENABLED(CONFIG_DRIVER_NET_FEC_IMX) && ccxmx51_id->eth0 && !pwr) {
- eth_register_ethaddr(0, hwid);
- imx51_add_fec(&fec_info);
+ if ((imx_iim_read(1, 9, hwid, sizeof(hwid)) != sizeof(hwid)) ||
+ (hwid[0] < 0x02) || (hwid[0] >= ARRAY_SIZE(ccxmx51_ids))) {
+ printf("Unknown board variant (0x%02x). System halted.\n", hwid[0]);
+ hang();
}
- if (IS_ENABLED(CONFIG_DRIVER_NET_SMC911X) && ccxmx51_id->eth1 && !pwr) {
- /* Configure the WEIM CS5 timming, bus width, etc */
- /* 16 bit on DATA[31..16], not multiplexed, async */
- writel(0x00420081, MX51_WEIM_BASE_ADDR + WEIM_CSxGCR1(5));
- /* ADH has not effect on non muxed bus */
- writel(0, MX51_WEIM_BASE_ADDR + WEIM_CSxGCR2(5));
- /* RWSC=50, RADVA=2, RADVN=6, OEA=0, OEN=0, RCSA=0, RCSN=0 */
- writel(0x32260000, MX51_WEIM_BASE_ADDR + WEIM_CSxRCR1(5));
- /* APR=0 */
- writel(0, MX51_WEIM_BASE_ADDR + WEIM_CSxRCR2(5));
- /* WAL=0, WBED=1, WWSC=50, WADVA=2, WADVN=6, WEA=0, WEN=0, WCSA=0 */
- writel(0x72080f00, MX51_WEIM_BASE_ADDR + WEIM_CSxWCR1(5));
-
- /* LAN9221 network controller */
- add_generic_device("smc911x", 1, NULL, MX51_CS5_BASE_ADDR, SZ_4K, IORESOURCE_MEM, NULL);
+ ccxmx_id = &ccxmx51_ids[hwid[0]];
+
+ switch (hwid[2] & 0xc0) {
+ case 0x00:
+ manloc = 'B';
+ break;
+ case 0x40:
+ manloc = 'W';
+ break;
+ case 0x80:
+ manloc = 'S';
+ break;
+ default:
+ break;
}
- imx51_add_usbotg(&ccxmx51_otg_pdata);
+ eth_register_ethaddr(0, hwid);
- armlinux_set_architecture(ccxmx51_id->wless ? MACH_TYPE_CCWMX51 : MACH_TYPE_CCMX51);
+ boardserial = ((hwid[2] & 0x3f) << 24) | (hwid[3] << 16) | (hwid[4] << 8) | hwid[5];
- return 0;
-}
-device_initcall(ccxmx51_devices_init);
+ printf("Module Variant: %s (0x%02x)\n", ccxmx_id->id_string, hwid[0]);
+ printf("Module HW Rev : %02x\n", hwid[1] + 1);
+ printf("Module Serial : %c%d\n", manloc, boardserial);
-static int ccxmx51_console_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(ccxmx51_pads, ARRAY_SIZE(ccxmx51_pads));
+ if ((ccxmx_id->mem_sz - SZ_128M) > 0)
+ arm_add_mem_device("ram1", MX51_CSD0_BASE_ADDR + SZ_128M,
+ ccxmx_id->mem_sz - SZ_128M);
+
+ mc13xxx_register_init_callback(ccxmx51_power_init);
- barebox_set_model("Digi ConnectCore i.MX51");
- barebox_set_hostname("ccmx51");
+ imx51_bbu_internal_mmc_register_handler("mmc", "/dev/mmc0",
+ BBU_HANDLER_FLAG_DEFAULT);
- imx51_add_uart0();
+ if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT))
+ defaultenv_append_directory(defaultenv_ccxmx51);
return 0;
}
-console_initcall(ccxmx51_console_init);
+fs_initcall(ccxmx51_init);
diff --git a/arch/arm/boards/ccxmx51/ccxmx51.h b/arch/arm/boards/ccxmx51/ccxmx51.h
deleted file mode 100644
index 3feacac03..000000000
--- a/arch/arm/boards/ccxmx51/ccxmx51.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright 2010 Digi International Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef _CCXMX51_H_
-#define _CCXMX51_H_
-
-struct ccxmx51_hwid {
- u8 variant;
- u8 version;
- u32 sn;
- char mloc;
-};
-
-struct ccxmx51_ident {
- const char *id_string;
- const int mem_sz;
- const char industrial;
- const char eth0;
- const char eth1;
- const char wless;
-};
-
-extern struct ccxmx51_ident *ccxmx51_id;
-
-#endif /* _CCXMX51_H_ */
diff --git a/arch/arm/boards/ccxmx51/ccxmx51js.c b/arch/arm/boards/ccxmx51/ccxmx51js.c
deleted file mode 100644
index 7f068e239..000000000
--- a/arch/arm/boards/ccxmx51/ccxmx51js.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <common.h>
-#include <io.h>
-#include <init.h>
-#include <gpio.h>
-#include <mci.h>
-#include <asm/armlinux.h>
-#include <mach/generic.h>
-#include <mach/imx51-regs.h>
-#include <mach/iomux-mx51.h>
-#include <mach/devices-imx51.h>
-#include <generated/mach-types.h>
-
-#include "ccxmx51.h"
-
-#define CCXMX51JS_USBH1_RESET IMX_GPIO_NR(3, 8)
-#define CCXMX51JS_SD3_WP IMX_GPIO_NR(3, 17)
-
-static iomux_v3_cfg_t ccxmx51js_pads[] = {
- /* SD1 */
- MX51_PAD_SD1_CLK__SD1_CLK,
- MX51_PAD_SD1_CMD__SD1_CMD,
- MX51_PAD_SD1_DATA0__SD1_DATA0,
- MX51_PAD_SD1_DATA1__SD1_DATA1,
- MX51_PAD_SD1_DATA2__SD1_DATA2,
- MX51_PAD_SD1_DATA3__SD1_DATA3,
- /* SD3 */
- MX51_PAD_NANDF_CS7__SD3_CLK,
- MX51_PAD_NANDF_RDY_INT__SD3_CMD,
- MX51_PAD_NANDF_D8__SD3_DATA0,
- MX51_PAD_NANDF_D9__SD3_DATA1,
- MX51_PAD_NANDF_D10__SD3_DATA2,
- MX51_PAD_NANDF_D11__SD3_DATA3,
- MX51_PAD_NANDF_D12__SD3_DAT4,
- MX51_PAD_NANDF_D13__SD3_DAT5,
- MX51_PAD_NANDF_D14__SD3_DAT6,
- MX51_PAD_NANDF_D15__SD3_DAT7,
- /* USB HOST1 */
- MX51_PAD_USBH1_CLK__USBH1_CLK,
- MX51_PAD_USBH1_DIR__USBH1_DIR,
- MX51_PAD_USBH1_NXT__USBH1_NXT,
- MX51_PAD_USBH1_STP__USBH1_STP,
- MX51_PAD_USBH1_DATA0__USBH1_DATA0,
- MX51_PAD_USBH1_DATA1__USBH1_DATA1,
- MX51_PAD_USBH1_DATA2__USBH1_DATA2,
- MX51_PAD_USBH1_DATA3__USBH1_DATA3,
- MX51_PAD_USBH1_DATA4__USBH1_DATA4,
- MX51_PAD_USBH1_DATA5__USBH1_DATA5,
- MX51_PAD_USBH1_DATA6__USBH1_DATA6,
- MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-};
-
-static struct esdhc_platform_data sdhc1_pdata = {
- .cd_type = ESDHC_CD_NONE,
- .wp_type = ESDHC_WP_NONE,
- .caps = MMC_CAP_4_BIT_DATA,
-};
-
-static struct esdhc_platform_data sdhc3_pdata = {
- .cd_type = ESDHC_CD_NONE,
- .wp_type = ESDHC_WP_GPIO,
- .wp_gpio = CCXMX51JS_SD3_WP,
- .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-};
-
-static struct imxusb_platformdata ccxmx51js_usbhost1_pdata = {
- .flags = MXC_EHCI_MODE_ULPI | MXC_EHCI_ITC_NO_THRESHOLD,
- .mode = IMX_USB_MODE_HOST,
-};
-
-static int ccxmx51js_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(ccxmx51js_pads, ARRAY_SIZE(ccxmx51js_pads));
-
- if (IS_ENABLED(CONFIG_MCI_IMX_ESDHC)) {
- imx51_add_mmc0(&sdhc1_pdata);
- imx51_add_mmc2(&sdhc3_pdata);
- }
-
- gpio_direction_output(CCXMX51JS_USBH1_RESET, 0);
- mdelay(10);
- gpio_set_value(CCXMX51JS_USBH1_RESET, 1);
- mdelay(10);
- imx51_add_usbh1(&ccxmx51js_usbhost1_pdata);
-
- armlinux_set_architecture(ccxmx51_id->wless ? MACH_TYPE_CCWMX51JS : MACH_TYPE_CCMX51JS);
-
- return 0;
-}
-
-late_initcall(ccxmx51js_init);
diff --git a/arch/arm/boards/ccxmx51/env/boot/nand b/arch/arm/boards/ccxmx51/defaultenv-ccxmx51/boot/nand
similarity index 100%
rename from arch/arm/boards/ccxmx51/env/boot/nand
rename to arch/arm/boards/ccxmx51/defaultenv-ccxmx51/boot/nand
diff --git a/arch/arm/boards/ccxmx51/env/nv/boot.default b/arch/arm/boards/ccxmx51/defaultenv-ccxmx51/nv/boot.default
similarity index 100%
rename from arch/arm/boards/ccxmx51/env/nv/boot.default
rename to arch/arm/boards/ccxmx51/defaultenv-ccxmx51/nv/boot.default
diff --git a/arch/arm/boards/ccxmx51/env/init/mtdparts-nand b/arch/arm/boards/ccxmx51/env/init/mtdparts-nand
deleted file mode 100644
index 27ed38a88..000000000
--- a/arch/arm/boards/ccxmx51/env/init/mtdparts-nand
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-mtdparts="512k(barebox)ro,256k(bareboxenv),3328k(kernel),-(root)"
-kernelname="mxc_nand"
-
-mtdparts-add -b -d nand0 -k ${kernelname} -p ${mtdparts}
diff --git a/arch/arm/boards/ccxmx51/env/nv/autoboot_timeout b/arch/arm/boards/ccxmx51/env/nv/autoboot_timeout
deleted file mode 100644
index 0cfbf0888..000000000
--- a/arch/arm/boards/ccxmx51/env/nv/autoboot_timeout
+++ /dev/null
@@ -1 +0,0 @@
-2
diff --git a/arch/arm/boards/ccxmx51/lowlevel.c b/arch/arm/boards/ccxmx51/lowlevel.c
index 2b3dc42e8..462c22e28 100644
--- a/arch/arm/boards/ccxmx51/lowlevel.c
+++ b/arch/arm/boards/ccxmx51/lowlevel.c
@@ -1,3 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Author: Alexander Shiyan <shc_work@mail.ru> */
+
#include <common.h>
#include <mach/esdctl.h>
#include <mach/generic.h>
@@ -5,8 +8,16 @@
#include <asm/barebox-arm-head.h>
#include <mach/imx51-regs.h>
-void __naked barebox_arm_reset_vector(void)
+ENTRY_FUNCTION(start_ccxmx51, r0, r1, r2)
{
+ extern char __dtb_imx51_ccxmx51_start[];
+ void *fdt;
+
imx5_cpu_lowlevel_init();
- barebox_arm_entry(MX51_CSD0_BASE_ADDR, SZ_128M, NULL);
+
+ arm_setup_stack(0x20000000 - 16);
+
+ fdt = __dtb_imx51_ccxmx51_start + get_runtime_offset();
+
+ barebox_arm_entry(MX51_CSD0_BASE_ADDR, SZ_128M, fdt);
}
diff --git a/arch/arm/configs/ccmx51_defconfig b/arch/arm/configs/ccmx51_defconfig
deleted file mode 100644
index c16f73f7b..000000000
--- a/arch/arm/configs/ccmx51_defconfig
+++ /dev/null
@@ -1,60 +0,0 @@
-CONFIG_ARCH_IMX=y
-CONFIG_MACH_CCMX51=y
-CONFIG_AEABI=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_MMU=y
-CONFIG_MALLOC_SIZE=0x2000000
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/ccxmx51/env"
-CONFIG_LONGHELP=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_ARM_MMUINFO=y
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_GO=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_CRC=y
-CONFIG_CMD_CRC_CMP=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NANDTEST=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_OFTREE=y
-CONFIG_NET=y
-CONFIG_DRIVER_NET_FEC_IMX=y
-CONFIG_DRIVER_NET_SMC911X=y
-CONFIG_I2C=y
-CONFIG_I2C_IMX=y
-CONFIG_MTD=y
-CONFIG_NAND=y
-CONFIG_NAND_IMX=y
-CONFIG_USB_HOST=y
-CONFIG_USB_IMX_CHIPIDEA=y
-CONFIG_USB_EHCI=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_STORAGE=y
-CONFIG_MCI=y
-CONFIG_MCI_IMX_ESDHC=y
-CONFIG_FS_CRAMFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FAT_WRITE=y
-CONFIG_FS_FAT_LFN=y
-CONFIG_LZO_DECOMPRESS=y
diff --git a/arch/arm/configs/imx_v7_defconfig b/arch/arm/configs/imx_v7_defconfig
index 64b202b9d..2068a6cee 100644
--- a/arch/arm/configs/imx_v7_defconfig
+++ b/arch/arm/configs/imx_v7_defconfig
@@ -1,6 +1,7 @@
CONFIG_ARCH_IMX=y
CONFIG_IMX_MULTI_BOARDS=y
CONFIG_MACH_KINDLE_MX50=y
+CONFIG_MACH_CCMX51=y
CONFIG_MACH_EFIKA_MX_SMARTBOOK=y
CONFIG_MACH_EMBEDSKY_E9=y
CONFIG_MACH_FREESCALE_MX51_PDK=y
@@ -41,7 +42,6 @@ CONFIG_MACH_PHYTEC_PHYCORE_IMX7=y
CONFIG_MACH_FREESCALE_MX7_SABRESD=y
CONFIG_MACH_NXP_IMX6ULL_EVK=y
CONFIG_MACH_GRINN_LITEBOARD=y
-CONFIG_IMX_IIM=y
CONFIG_IMX_IIM_FUSE_BLOW=y
CONFIG_THUMB2_BAREBOX=y
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index c08b35a10..4af286a11 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -21,6 +21,7 @@ pbl-dtb-$(CONFIG_MACH_EMBEDSKY_E9) += imx6q-embedsky-e9.dtb.o
pbl-dtb-$(CONFIG_MACH_FREESCALE_MX51_PDK) += imx51-babbage.dtb.o
pbl-dtb-$(CONFIG_MACH_FREESCALE_MX53_LOCO) += imx53-qsb.dtb.o imx53-qsrb.dtb.o
pbl-dtb-$(CONFIG_MACH_TX53) += imx53-tx53-xx30.dtb.o imx53-tx53-1011.dtb.o
+pbl-dtb-$(CONFIG_MACH_CCMX51) += imx51-ccxmx51.dtb.o
pbl-dtb-$(CONFIG_MACH_CCMX53) += imx53-ccxmx53.dtb.o
pbl-dtb-$(CONFIG_MACH_FREESCALE_MX53_VMX53) += imx53-voipac-bsb.dtb.o
pbl-dtb-$(CONFIG_MACH_FREESCALE_MX7_SABRESD) += imx7d-sdb.dtb.o
diff --git a/arch/arm/dts/imx51-ccxmx51.dts b/arch/arm/dts/imx51-ccxmx51.dts
new file mode 100644
index 000000000..efe5dbf63
--- /dev/null
+++ b/arch/arm/dts/imx51-ccxmx51.dts
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Author: Alexander Shiyan <shc_work@mail.ru> */
+
+#include <arm/imx51-digi-connectcore-jsk.dts>
+
+/ {
+ chosen {
+ stdout-path = &uart1;
+
+ environment {
+ compatible = "barebox,environment";
+ device-path = &nfc, "partname:env";
+ };
+ };
+};
+
+&iim {
+ barebox,provide-mac-address = <&fec 1 9>;
+};
+
+&nfc {
+ partition@0 {
+ label = "boot";
+ reg = <0x00000 0x80000>;
+ };
+
+ partition@80000 {
+ label = "env";
+ reg = <0x80000 0x40000>;
+ };
+
+ partition@c0000 {
+ label = "kernel";
+ reg = <0xc0000 0x340000>;
+ };
+
+ partition@400000 {
+ label = "root";
+ reg = <0x400000 0>;
+ };
+};
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index d9b60053d..2eeff5b6b 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -26,7 +26,6 @@ config ARCH_TEXT_BASE
default 0x93d00000 if MACH_TX25
default 0x7ff00000 if MACH_TQMA53
default 0x97f00000 if MACH_TX51
- default 0x97f00000 if MACH_CCMX51
default 0x4fc00000 if MACH_SABRELITE
default 0x8fe00000 if MACH_TX53
default 0x97f00000 if MACH_EFIKA_MX_SMARTBOOK
@@ -246,6 +245,17 @@ config MACH_KINDLE_MX50
Kindle Model No. D01100 (Kindle Wi-Fi), D01200 (Kindle Touch) or
EY21 (Kindle Paperwhite).
+config MACH_CCMX51
+ bool "ConnectCore i.MX51"
+ select ARCH_IMX51
+ select IMX_IIM
+ select SPI
+ select DRIVER_SPI_IMX
+ select MFD_MC13XXX
+ select RELOCATABLE
+ help
+ Say Y here if you are using Digi ConnectCore (W)i-i.MX51
+ equipped with a Freescale i.MX51 Processor
+
config MACH_EFIKA_MX_SMARTBOOK
bool "Efika MX smartbook"
select ARCH_IMX51
@@ -622,25 +632,6 @@ config MACH_TX51
help
Say Y here if you are using the Ka-Ro tx51 board
-config MACH_CCMX51
- bool "ConnectCore i.MX51"
- select ARCH_IMX51
- select IMX_IIM
- select SPI
- select DRIVER_SPI_IMX
- select MFD_MC13XXX
- help
- Say Y here if you are using Digi ConnectCore (W)i-i.MX51
- equipped with a Freescale i.MX51 Processor
-
-config MACH_CCMX51_BASEBOARD
- bool "Digi development board for CCMX51 module"
- depends on MACH_CCMX51
- default y
- help
- This adds board specific devices that can be found on Digi
- evaluation board for CCMX51 module.
-
# ----------------------------------------------------------
comment "i.MX53 Boards"
diff --git a/images/Makefile.imx b/images/Makefile.imx
index 8b8a5452b..6aa46b835 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
@@ -57,6 +57,11 @@ FILE_barebox-kindle-ey21.img = start_imx50_kindle_ey21.pblb.imximg
image-$(CONFIG_MACH_KINDLE_MX50) += barebox-kindle-ey21.img
# ----------------------- i.MX51 based boards ---------------------------
+pblb-$(CONFIG_MACH_CCMX51) += start_ccxmx51
+CFG_start_ccxmx51.pblb.imximg = $(board)/ccxmx51/flash-header.imxcfg
+FILE_barebox-imx51-ccxmx51.img = start_ccxmx51.pblb.imximg
+image-$(CONFIG_MACH_CCMX51) += barebox-imx51-ccxmx51.img
+
pblb-$(CONFIG_MACH_FREESCALE_MX51_PDK) += start_imx51_babbage
CFG_start_imx51_babbage.pblb.imximg = $(board)/freescale-mx51-babbage/flash-header-imx51-babbage.imxcfg
FILE_barebox-freescale-imx51-babbage.img = start_imx51_babbage.pblb.imximg
--
2.13.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH V3 1/2] mfd: mc13892: MC13892_POWER_MISC bits revision
2018-12-24 6:24 [PATCH V3 1/2] mfd: mc13892: MC13892_POWER_MISC bits revision Alexander Shiyan
2018-12-24 6:24 ` [PATCH V3 2/2] ARM: CCMX51: Switch to multiimage support Alexander Shiyan
@ 2019-01-03 9:41 ` Sascha Hauer
1 sibling, 0 replies; 3+ messages in thread
From: Sascha Hauer @ 2019-01-03 9:41 UTC (permalink / raw)
To: Alexander Shiyan; +Cc: barebox
On Mon, Dec 24, 2018 at 09:24:56AM +0300, Alexander Shiyan wrote:
> This patch revises the bits for register MC13892_POWER_MISC.
> - Added definition for one missing bit (0).
> - Changed the name for bit 21 for accordance with the datasheet.
> - Updated affected board that uses these definitions.
> - Replaced spaces with tabs for the remaining bits.
>
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> ---
> arch/arm/boards/efika-mx-smartbook/board.c | 2 +-
> include/mfd/mc13892.h | 23 ++++++++++++-----------
> 2 files changed, 13 insertions(+), 12 deletions(-)
Applied, thanks
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-01-03 9:41 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-24 6:24 [PATCH V3 1/2] mfd: mc13892: MC13892_POWER_MISC bits revision Alexander Shiyan
2018-12-24 6:24 ` [PATCH V3 2/2] ARM: CCMX51: Switch to multiimage support Alexander Shiyan
2019-01-03 9:41 ` [PATCH V3 1/2] mfd: mc13892: MC13892_POWER_MISC bits revision Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox