mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 04/21] PCI: Convert prescan_setup_bridge() to use a loop
Date: Wed,  9 Jan 2019 20:57:22 -0800	[thread overview]
Message-ID: <20190110045739.19399-5-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20190110045739.19399-1-andrew.smirnov@gmail.com>

Simplify prescan_setup_bridge() by folding base setup code into a
loop. No functional change intended.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 drivers/pci/pci.c | 37 ++++++++++++++-----------------------
 1 file changed, 14 insertions(+), 23 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 11f84934f5..02b7f091f7 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -256,6 +256,11 @@ static void setup_device(struct pci_dev *dev, int max_bar)
 	list_add_tail(&dev->bus_list, &dev->bus->devices);
 }
 
+static size_t pci_resource_to_alignment(int r)
+{
+	return (r == PCI_BUS_RESOURCE_IO) ? SZ_4K : SZ_1M;
+}
+
 static void __pci_set_base_or_limit(struct pci_dev *dev, int r,
 				    resource_size_t addr, bool limit)
 {
@@ -295,6 +300,7 @@ static void pci_set_base(struct pci_dev *dev, int r, resource_size_t addr)
 static void prescan_setup_bridge(struct pci_dev *dev)
 {
 	u16 cmdstat;
+	int r;
 
 	pci_read_config_word(dev, PCI_COMMAND, &cmdstat);
 
@@ -303,36 +309,21 @@ static void prescan_setup_bridge(struct pci_dev *dev)
 	pci_write_config_byte(dev, PCI_SECONDARY_BUS, dev->subordinate->number);
 	pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, 0xff);
 
-	if (last[PCI_BUS_RESOURCE_MEM]) {
-		/* Set up memory and I/O filter limits, assume 32-bit I/O space */
-		last[PCI_BUS_RESOURCE_MEM] = ALIGN(last[PCI_BUS_RESOURCE_MEM], SZ_1M);
-		pci_set_base(dev, PCI_BUS_RESOURCE_MEM,
-			     last[PCI_BUS_RESOURCE_MEM]);
-		cmdstat |= PCI_COMMAND_MEMORY;
+	for (r = PCI_BUS_RESOURCE_IO; r <= PCI_BUS_RESOURCE_MEM_PREF; r++) {
+		if (last[r]) {
+			cmdstat |= (r == PCI_BUS_RESOURCE_IO) ?
+				PCI_COMMAND_IO : PCI_COMMAND_MEMORY;
+			last[r] = ALIGN(last[r], pci_resource_to_alignment(r));
+			pci_set_base(dev, r, last[r]);
+		}
 	}
 
-	if (last[PCI_BUS_RESOURCE_MEM_PREF]) {
-		/* Set up memory and I/O filter limits, assume 32-bit I/O space */
-		last[PCI_BUS_RESOURCE_MEM_PREF] =
-			ALIGN(last[PCI_BUS_RESOURCE_MEM_PREF],
-			      SZ_1M);
-		pci_set_base(dev, PCI_BUS_RESOURCE_MEM_PREF,
-			     last[PCI_BUS_RESOURCE_MEM_PREF]);
-		cmdstat |= PCI_COMMAND_MEMORY;
-	} else {
-
+	if (!last[PCI_BUS_RESOURCE_MEM_PREF]) {
 		/* We don't support prefetchable memory for now, so disable */
 		pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0x1000);
 		pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0x0);
 	}
 
-	if (last[PCI_BUS_RESOURCE_IO]) {
-		last[PCI_BUS_RESOURCE_IO] = ALIGN(last[PCI_BUS_RESOURCE_IO], SZ_4K);
-		pci_set_base(dev, PCI_BUS_RESOURCE_IO,
-			     last[PCI_BUS_RESOURCE_IO]);
-		cmdstat |= PCI_COMMAND_IO;
-	}
-
 	/* Enable memory and I/O accesses, enable bus master */
 	pci_write_config_word(dev, PCI_COMMAND, cmdstat | PCI_COMMAND_MASTER);
 }
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2019-01-10  4:58 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-10  4:57 [PATCH 00/21] PCI improvements Andrey Smirnov
2019-01-10  4:57 ` [PATCH 01/21] PCI: Switch to using %pa to print memory addresses Andrey Smirnov
2019-01-10  4:57 ` [PATCH 02/21] PCI: Replace last_* variables with an array Andrey Smirnov
2019-01-10  4:57 ` [PATCH 03/21] PCI: Consolidate limit/base settting code Andrey Smirnov
2019-01-10  4:57 ` Andrey Smirnov [this message]
2019-01-10  4:57 ` [PATCH 05/21] PCI: Convert postscan_setup_bridge() to use a loop Andrey Smirnov
2019-01-10 10:09   ` Sascha Hauer
2019-01-10 19:16     ` Andrey Smirnov
2019-01-11 10:47       ` Sascha Hauer
2019-01-12  2:34         ` Andrey Smirnov
2019-01-10  4:57 ` [PATCH 06/21] PCI: Replace magic number in setup_device() Andrey Smirnov
2019-01-10  4:57 ` [PATCH 07/21] PCI: Remove superfluous parens " Andrey Smirnov
2019-01-10  4:57 ` [PATCH 08/21] PCI: Simplify resource setup code " Andrey Smirnov
2019-01-10  4:57 ` [PATCH 09/21] PCI: Store and reuse BAR offsets Andrey Smirnov
2019-01-10  4:57 ` [PATCH 10/21] PCI: Conver register_pci_controller() to use a loop Andrey Smirnov
2019-01-10  4:57 ` [PATCH 11/21] PCI: Remove unused variables/code Andrey Smirnov
2019-01-10  4:57 ` [PATCH 12/21] PCI: Make pci_scan_bus static Andrey Smirnov
2019-01-10  4:57 ` [PATCH 13/21] PCI: Drop "slots" from struct pci_bus Andrey Smirnov
2019-01-10  4:57 ` [PATCH 14/21] PCI: Drop "resources" " Andrey Smirnov
2019-01-10  4:57 ` [PATCH 15/21] PCI: Drop "name" " Andrey Smirnov
2019-01-10  4:57 ` [PATCH 16/21] PCI: Drop "ops" " Andrey Smirnov
2019-01-10  4:57 ` [PATCH 17/21] PCI: Drop "rom_address" from struct pci_dev Andrey Smirnov
2019-01-10  4:57 ` [PATCH 18/21] PCI: Simplify alloc_pci_dev() Andrey Smirnov
2019-01-10  4:57 ` [PATCH 19/21] PCI: Assume 1:1 mapping if .res_start callback is NULL Andrey Smirnov
2019-01-10  4:57 ` [PATCH 20/21] PCI: Convert ->res_start() to return resource_size_t Andrey Smirnov
2019-01-10  4:57 ` [PATCH 21/21] PCI: Consify pci_ops in struct pci_controller Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190110045739.19399-5-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox