From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1ghs5z-0003fG-4i for barebox@lists.infradead.org; Fri, 11 Jan 2019 08:23:17 +0000 Date: Fri, 11 Jan 2019 09:23:11 +0100 From: Uwe =?iso-8859-1?Q?Kleine-K=F6nig?= Message-ID: <20190111082311.pvjibjdkpfvvb2k4@pengutronix.de> References: <20190111104541.7dec78587e650eb199e81cf1@gmail.com> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20190111104541.7dec78587e650eb199e81cf1@gmail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: barebox: plathome-openblocks-a6/kwbimage.cfg is missed To: Antony Pavlov Cc: barebox@lists.infradead.org, Ezequiel Garcia [fixed e-mail address of Ezequiel, added Sebastian to Cc:] Hello, On Fri, Jan 11, 2019 at 10:45:41AM +0300, Antony Pavlov wrote: > Hi! > = > It looks like the file arch/arm/boards/plathome-openblocks-a6/kwbimage.cf= g is missed. > = > Here is my build log quotes: > = > git clone git://git.pengutronix.de/git/barebox.git > cd barebox > git describe > v2018.12.0-140-g64fc4ac1b > = > touch arch/arm/boards/globalscale-mirabox/binary.0 > touch arch/arm/boards/lenovo-ix4-300d/binary.0 > touch arch/arm/boards/marvell-armada-xp-gp/binary.0 > touch arch/arm/boards/netgear-rn104/binary.0 > touch arch/arm/boards/plathome-openblocks-ax3/binary.0 > = > CROSS_COMPILE=3Darm-linux-gnueabi- ./MAKEALL -a arm mvebu_defconfig > = > ... > = > Could not open input file /home/builduser/barebox/arch/arm/boards/plath= ome-openblocks-a6/kwbimage.cfg That problem goes back to v2014.08.0-242-g906afb533186 ("ARM: mvebu: Add Plat'home's Kirkwood Openblocks A6 board support") I didn't find vendor U-Boot sources for that machine, also mainline U-Boot doesn't seem to support it. According to the dts/src/arm/kirkwood-openblocks_a6.dts that device has an "uboot" partition in NAND. So I suggest: diff --git a/arch/arm/boards/plathome-openblocks-a6/kwbimage.cfg b/arch/arm= /boards/plathome-openblocks-a6/kwbimage.cfg new file mode 100644 index 000000000000..ba3011736fb7 --- /dev/null +++ b/arch/arm/boards/plathome-openblocks-a6/kwbimage.cfg @@ -0,0 +1,3 @@ +VERSION 1 +BOOT_FROM nand +BINARY ./binary.0 0000005b 00000068 Best regards Uwe -- = Pengutronix e.K. | Uwe Kleine-K=F6nig | Industrial Linux Solutions | http://www.pengutronix.de/ | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox