* build barebox for imx8mqevk
@ 2019-01-11 7:53 Yazdani, Reyhaneh
2019-01-11 11:13 ` Sascha Hauer
0 siblings, 1 reply; 5+ messages in thread
From: Yazdani, Reyhaneh @ 2019-01-11 7:53 UTC (permalink / raw)
To: barebox
Hello everyone,
I am going to build Barebox for my imx8mq evaluation kit and in this process, I
have faced a problem.
At first, I used a 32bit-armtoolchain(arm-poky-linux-gnueabi-gcc), which I have
used for building barebox for imx6..
$ make imx_v8_defconfig
$ make
Then I got this error:
arm-poky-linux-gnueabi-gcc: error: unrecognized argument in option ‘-mabi=lp64’
Then, I used a 64bit-arm-toolchain(aarch64-poky-linux-gcc).
When I try again:
$ make imx_v8_defconfig
Makefile:405: /development/gitarchives/barebox/arch/arm64/Makefile: No such file
or directory
make: *** No rule to make target
'/development/gitarchives/barebox/arch/arm64/Makefile'. Stop.
I would appreciate if you help me, how to compile Barebox for imx8.
Thanks in advance.
Best regards,
Reyhaneh Yazdani
--
Reyhaneh Yazdani
Data Modul AG TEL: +49-89-56017-154
Embedded development FAX: +49-89-56017-119
Linux - Development RG: HR-Muenchen B-85591
Landsberger Str. 322 D-80687 Muenchen - http://www.data-modul.com
Vertrauliche E-Mail von / Confidential e-mail from: DATA MODUL AG
Vorstand / CEO: Dr. Florian Pesahl
Vorsitzende des Aufsichtsrates / Chairwoman of the Supervisory Board: Kristin D. Russell
Sitz der Gesellschaft / Registered Office: München
Registergericht / Registration Court: München Handelsregister B 85 591
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: build barebox for imx8mqevk
2019-01-11 7:53 build barebox for imx8mqevk Yazdani, Reyhaneh
@ 2019-01-11 11:13 ` Sascha Hauer
2019-01-15 14:42 ` Yazdani, Reyhaneh
2019-01-25 13:16 ` Christian Hemp
0 siblings, 2 replies; 5+ messages in thread
From: Sascha Hauer @ 2019-01-11 11:13 UTC (permalink / raw)
To: Yazdani, Reyhaneh; +Cc: barebox
Hi,
On Fri, Jan 11, 2019 at 07:53:15AM +0000, Yazdani, Reyhaneh wrote:
> Hello everyone,
>
> I am going to build Barebox for my imx8mq evaluation kit and in this process, I
> have faced a problem.
>
> At first, I used a 32bit-armtoolchain(arm-poky-linux-gnueabi-gcc), which I have
> used for building barebox for imx6..
> $ make imx_v8_defconfig
> $ make
>
> Then I got this error:
> arm-poky-linux-gnueabi-gcc: error: unrecognized argument in option ‘-mabi=lp64’
This cannot work. You need a 64bit toolchain.
>
>
> Then, I used a 64bit-arm-toolchain(aarch64-poky-linux-gcc).
> When I try again:
>
> $ make imx_v8_defconfig
> Makefile:405: /development/gitarchives/barebox/arch/arm64/Makefile: No such file
> or directory
> make: *** No rule to make target
> '/development/gitarchives/barebox/arch/arm64/Makefile'. Stop.
>
> I would appreciate if you help me, how to compile Barebox for imx8.
You have to pass ARCH=arm as environment variable. It seems that you
pass ARCH=arm64.
In barebox both ARM 32bit and 64bit are handled under arch/arm,
nevertheless you have to pass a suitable toolchain.
Regards,
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: build barebox for imx8mqevk
2019-01-11 11:13 ` Sascha Hauer
@ 2019-01-15 14:42 ` Yazdani, Reyhaneh
2019-01-25 13:16 ` Christian Hemp
1 sibling, 0 replies; 5+ messages in thread
From: Yazdani, Reyhaneh @ 2019-01-15 14:42 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
Hi,
Thank you. Now I could build the Barebox :)
Best,
Reyhaneh
On 1/11/19 12:13 PM, Sascha Hauer wrote:
> Hi,
>
> On Fri, Jan 11, 2019 at 07:53:15AM +0000, Yazdani, Reyhaneh wrote:
>> Hello everyone,
>>
>> I am going to build Barebox for my imx8mq evaluation kit and in this process, I
>> have faced a problem.
>>
>> At first, I used a 32bit-armtoolchain(arm-poky-linux-gnueabi-gcc), which I have
>> used for building barebox for imx6..
>> $ make imx_v8_defconfig
>> $ make
>>
>> Then I got this error:
>> arm-poky-linux-gnueabi-gcc: error: unrecognized argument in option ‘-mabi=lp64’
>
> This cannot work. You need a 64bit toolchain.
>
>>
>>
>> Then, I used a 64bit-arm-toolchain(aarch64-poky-linux-gcc).
>> When I try again:
>>
>> $ make imx_v8_defconfig
>> Makefile:405: /development/gitarchives/barebox/arch/arm64/Makefile: No such file
>> or directory
>> make: *** No rule to make target
>> '/development/gitarchives/barebox/arch/arm64/Makefile'. Stop.
>>
>> I would appreciate if you help me, how to compile Barebox for imx8.
>
> You have to pass ARCH=arm as environment variable. It seems that you
> pass ARCH=arm64.
>
> In barebox both ARM 32bit and 64bit are handled under arch/arm,
> nevertheless you have to pass a suitable toolchain.
>
> Regards,
> Sascha
>
--
Reyhaneh Yazdani
Data Modul AG TEL: +49-89-56017-154
Embedded development FAX: +49-89-56017-119
Linux - Development RG: HR-Muenchen B-85591
Landsberger Str. 322 D-80687 Muenchen - http://www.data-modul.com
Vertrauliche E-Mail von / Confidential e-mail from: DATA MODUL AG
Vorstand / CEO: Dr. Florian Pesahl
Vorsitzende des Aufsichtsrates / Chairwoman of the Supervisory Board: Kristin D. Russell
Sitz der Gesellschaft / Registered Office: München
Registergericht / Registration Court: München Handelsregister B 85 591
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: build barebox for imx8mqevk
2019-01-11 11:13 ` Sascha Hauer
2019-01-15 14:42 ` Yazdani, Reyhaneh
@ 2019-01-25 13:16 ` Christian Hemp
2019-01-28 8:58 ` Sascha Hauer
1 sibling, 1 reply; 5+ messages in thread
From: Christian Hemp @ 2019-01-25 13:16 UTC (permalink / raw)
To: barebox
Hello Sascha,
Am Freitag, 11. Januar 2019, 12:13:16 CET schrieb Sascha Hauer:
> You have to pass ARCH=arm as environment variable. It seems that you
> pass ARCH=arm64.
>
> In barebox both ARM 32bit and 64bit are handled under arch/arm,
> nevertheless you have to pass a suitable toolchain.
Is there a specific reason why ARM 32bit and 64bit are handled under arch/arm
and not separate?
Regards
Christian
>
> Regards,
> Sascha
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: build barebox for imx8mqevk
2019-01-25 13:16 ` Christian Hemp
@ 2019-01-28 8:58 ` Sascha Hauer
0 siblings, 0 replies; 5+ messages in thread
From: Sascha Hauer @ 2019-01-28 8:58 UTC (permalink / raw)
To: Christian Hemp; +Cc: barebox
On Fri, Jan 25, 2019 at 02:16:40PM +0100, Christian Hemp wrote:
> Hello Sascha,
>
> Am Freitag, 11. Januar 2019, 12:13:16 CET schrieb Sascha Hauer:
> > You have to pass ARCH=arm as environment variable. It seems that you
> > pass ARCH=arm64.
> >
> > In barebox both ARM 32bit and 64bit are handled under arch/arm,
> > nevertheless you have to pass a suitable toolchain.
>
> Is there a specific reason why ARM 32bit and 64bit are handled under arch/arm
> and not separate?
Yes. They share a lot of code.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-01-28 8:59 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-11 7:53 build barebox for imx8mqevk Yazdani, Reyhaneh
2019-01-11 11:13 ` Sascha Hauer
2019-01-15 14:42 ` Yazdani, Reyhaneh
2019-01-25 13:16 ` Christian Hemp
2019-01-28 8:58 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox