From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH v3 00/17] PCIe support for i.MX7
Date: Tue, 15 Jan 2019 12:25:44 -0800 [thread overview]
Message-ID: <20190115202601.24831-1-andrew.smirnov@gmail.com> (raw)
Everyone:
This seires is a build-up on previously submitted PCI sync set [1] and
contains the patches I created while working on adding support for
PCIe on i.MX7. The series consists of following:
- Patches adding necessary regulator pluming to support porint ANATOP
driver
- ANATOP driver port
- Port of basic power domain infrastructure from Linux kernel needed
for controlling GPCv2 (useful for both i.MX7 and, especially, for
i.MX8MQ)
- Port of GPCv2 driver from Linux as well as of some bug fixes for it
- Port of i.MX7 reset controller driver
- Patches adding support for i.MX7 to existing i.MX6 PCIe host
controller driver
- Misc fixes
This series has been tested on i.MX7D SabreSD board against Toshiba
NVMe device.
Feedback is welcome!
Changes since [v2]:
- Dropped "base: Port driver_deferred_probe_check_state() from
Linux" and adjusted the rest of the series accordingly
Changes since [v1]:
- Patches containing bugfixes for GPCv2 were squashed into the patch
introducing the driver
- Patches containing bugfixes for i.MX7 reset controller were
squashed into the patch introducing the driver
- Deffered probe by GPIO support in i.MX6 PCI driver fixed by having
GPIO request preceed the call to dev_request_mem_resource()
Thanks,
Andrey Smirnov
[1] http://lists.infradead.org/pipermail/barebox/2018-December/036005.html
[v1] http://lists.infradead.org/pipermail/barebox/2019-January/036318.html
[v2] http://lists.infradead.org/pipermail/barebox/2019-January/036406.html
Andrey Smirnov (17):
regulator: Convert drivers to use struct regulator_desc
regulator: Port basic regmap regulator functions
regulator: Add support for setting regulator's voltage
base: driver: Drop redundant list_empty() check
regulator: Assume probe deferral instead of missing regulator
regulator: Port ANATOP driver from Linux
drivers: base: Port power management code from Linux
soc: imx: Add GPCv2 power gating driver
reset: Add i.MX7 SRC reset driver
reset: Mark local functions as static
PCI: imx6: Add code to support i.MX7D
PCI: imx6: Allow probe deferral by reset GPIO
PCI: imx6: Do not wait for speed change on i.MX7
PCI: imx6: Do not switch speed if Gen2 is disabled
PCI: imx6: Fix spelling mistake: "contol" -> "control"
PCI: imx6: Drop unnecessary root_bus_nr setting
PCI: imx6: Port imx6_pcie_ltssm_enable()
arch/arm/mach-imx/Kconfig | 1 +
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/base/Kconfig | 3 +
drivers/base/Makefile | 4 +-
drivers/base/driver.c | 5 +-
drivers/base/platform.c | 7 +
drivers/base/power.c | 249 +++++++++++++++++++++
drivers/pci/Kconfig | 4 +-
drivers/pci/pci-imx6.c | 255 +++++++++++++++-------
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 5 +-
drivers/regulator/anatop-regulator.c | 161 ++++++++++++++
drivers/regulator/bcm2835.c | 6 +-
drivers/regulator/core.c | 59 ++++-
drivers/regulator/fixed.c | 6 +-
drivers/regulator/helpers.c | 186 ++++++++++++++++
drivers/reset/Kconfig | 11 +
drivers/reset/Makefile | 1 +
drivers/reset/core.c | 8 +-
drivers/reset/reset-imx7.c | 151 +++++++++++++
drivers/soc/imx/Kconfig | 9 +
drivers/soc/imx/Makefile | 1 +
drivers/soc/imx/gpcv2.c | 315 +++++++++++++++++++++++++++
include/pm_domain.h | 82 +++++++
include/regulator.h | 41 +++-
26 files changed, 1480 insertions(+), 101 deletions(-)
create mode 100644 drivers/base/Kconfig
create mode 100644 drivers/base/power.c
create mode 100644 drivers/regulator/anatop-regulator.c
create mode 100644 drivers/regulator/helpers.c
create mode 100644 drivers/reset/reset-imx7.c
create mode 100644 drivers/soc/imx/Kconfig
create mode 100644 drivers/soc/imx/Makefile
create mode 100644 drivers/soc/imx/gpcv2.c
create mode 100644 include/pm_domain.h
--
2.20.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2019-01-15 20:26 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-15 20:25 Andrey Smirnov [this message]
2019-01-15 20:25 ` [PATCH v3 01/17] regulator: Convert drivers to use struct regulator_desc Andrey Smirnov
2019-01-15 20:25 ` [PATCH v3 02/17] regulator: Port basic regmap regulator functions Andrey Smirnov
2019-01-15 20:25 ` [PATCH v3 03/17] regulator: Add support for setting regulator's voltage Andrey Smirnov
2019-01-15 20:25 ` [PATCH v3 04/17] base: driver: Drop redundant list_empty() check Andrey Smirnov
2019-01-15 20:25 ` [PATCH v3 05/17] regulator: Assume probe deferral instead of missing regulator Andrey Smirnov
2019-01-15 20:25 ` [PATCH v3 06/17] regulator: Port ANATOP driver from Linux Andrey Smirnov
2019-01-16 2:10 ` Andrey Smirnov
2019-01-15 20:25 ` [PATCH v3 07/17] drivers: base: Port power management code " Andrey Smirnov
2019-01-15 20:25 ` [PATCH v3 08/17] soc: imx: Add GPCv2 power gating driver Andrey Smirnov
2019-01-15 20:25 ` [PATCH v3 09/17] reset: Add i.MX7 SRC reset driver Andrey Smirnov
2019-01-15 20:25 ` [PATCH v3 10/17] reset: Mark local functions as static Andrey Smirnov
2019-01-15 20:25 ` [PATCH v3 11/17] PCI: imx6: Add code to support i.MX7D Andrey Smirnov
2019-01-15 20:25 ` [PATCH v3 12/17] PCI: imx6: Allow probe deferral by reset GPIO Andrey Smirnov
2019-01-15 20:25 ` [PATCH v3 13/17] PCI: imx6: Do not wait for speed change on i.MX7 Andrey Smirnov
2019-01-15 20:25 ` [PATCH v3 14/17] PCI: imx6: Do not switch speed if Gen2 is disabled Andrey Smirnov
2019-01-15 20:25 ` [PATCH v3 15/17] PCI: imx6: Fix spelling mistake: "contol" -> "control" Andrey Smirnov
2019-01-15 20:26 ` [PATCH v3 16/17] PCI: imx6: Drop unnecessary root_bus_nr setting Andrey Smirnov
2019-01-15 20:26 ` [PATCH v3 17/17] PCI: imx6: Port imx6_pcie_ltssm_enable() Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190115202601.24831-1-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox