mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Rouven Czerwinski <r.czerwinski@pengutronix.de>
To: barebox@lists.infradead.org
Cc: "Rouven Czerwinski" <r.czerwinski@pengutronix.de>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Subject: [PATCH v2] ARM: imx: add support for Udoo Neo full
Date: Wed, 16 Jan 2019 10:29:52 +0100	[thread overview]
Message-ID: <20190116092952.31011-1-r.czerwinski@pengutronix.de> (raw)

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Original patch from Uwe Kleine-König, I fixed the
review comments and the imxcfg file to use the udoo neo values.

I also tested the support on the udoo neo full board.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
---
 arch/arm/boards/Makefile                           |   1 +
 arch/arm/boards/udoo-neo/Makefile                  |   2 +
 arch/arm/boards/udoo-neo/board.c                   |  27 +++++
 .../flash-header-mx6sx-udoo-neo_full.imxcfg        | 131 +++++++++++++++++++++
 arch/arm/boards/udoo-neo/lowlevel.c                |  39 ++++++
 arch/arm/dts/Makefile                              |   1 +
 arch/arm/dts/imx6sx-udoo-neo-full.dts              |   4 +
 arch/arm/mach-imx/Kconfig                          |   4 +
 arch/arm/mach-imx/include/mach/esdctl.h            |   1 +
 images/Makefile.imx                                |   5 +
 10 files changed, 215 insertions(+)
 create mode 100644 arch/arm/boards/udoo-neo/Makefile
 create mode 100644 arch/arm/boards/udoo-neo/board.c
 create mode 100644 arch/arm/boards/udoo-neo/flash-header-mx6sx-udoo-neo_full.imxcfg
 create mode 100644 arch/arm/boards/udoo-neo/lowlevel.c
 create mode 100644 arch/arm/dts/imx6sx-udoo-neo-full.dts

diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 3bf176b14..953a6eec1 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -139,6 +139,7 @@ obj-$(CONFIG_MACH_TX51)				+= karo-tx51/
 obj-$(CONFIG_MACH_TX53)				+= karo-tx53/
 obj-$(CONFIG_MACH_TX6X)				+= karo-tx6x/
 obj-$(CONFIG_MACH_UDOO)				+= udoo/
+obj-$(CONFIG_MACH_UDOO_NEO)			+= udoo-neo/
 obj-$(CONFIG_MACH_USB_A9260)			+= usb-a926x/
 obj-$(CONFIG_MACH_USB_A9263)			+= usb-a926x/
 obj-$(CONFIG_MACH_USB_A9G20)			+= usb-a926x/
diff --git a/arch/arm/boards/udoo-neo/Makefile b/arch/arm/boards/udoo-neo/Makefile
new file mode 100644
index 000000000..01c7a259e
--- /dev/null
+++ b/arch/arm/boards/udoo-neo/Makefile
@@ -0,0 +1,2 @@
+obj-y += board.o
+lwl-y += lowlevel.o
diff --git a/arch/arm/boards/udoo-neo/board.c b/arch/arm/boards/udoo-neo/board.c
new file mode 100644
index 000000000..9bf480305
--- /dev/null
+++ b/arch/arm/boards/udoo-neo/board.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2014 Pengutronix, Sascha Hauer
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <linux/clk.h>
+
+static int imx6sx_udoneo_coredevices_init(void)
+{
+	if (!of_machine_is_compatible("fsl,imx6sx-udoo-neo"))
+		return 0;
+
+	barebox_set_hostname("mx6sx-udooneo");
+
+	return 0;
+}
+coredevice_initcall(imx6sx_udoneo_coredevices_init);
diff --git a/arch/arm/boards/udoo-neo/flash-header-mx6sx-udoo-neo_full.imxcfg b/arch/arm/boards/udoo-neo/flash-header-mx6sx-udoo-neo_full.imxcfg
new file mode 100644
index 000000000..39f2a8a22
--- /dev/null
+++ b/arch/arm/boards/udoo-neo/flash-header-mx6sx-udoo-neo_full.imxcfg
@@ -0,0 +1,131 @@
+/*
+ * These values are taken from:
+ * repository: https://github.com/UDOOboard/uboot-imx
+ * branch: udoo/2015.04.imx
+ * file: board/udoo/udoo_neo/udoo_neo.cfg
+ */
+
+loadaddr 0x80000000
+soc imx6
+dcdofs 0x400
+
+/* Enable all clocks */
+wm 32 0x020c4068 0xffffffff
+wm 32 0x020c406c 0xffffffff
+wm 32 0x020c4070 0xffffffff
+wm 32 0x020c4074 0xffffffff
+wm 32 0x020c4078 0xffffffff
+wm 32 0x020c407c 0xffffffff
+wm 32 0x020c4080 0xffffffff
+wm 32 0x020c4084 0xffffffff
+/********************************************/
+
+/* IOMUX */
+/* DDR IO TYPE */
+wm 32 0x020e0618 0x000c0000
+wm 32 0x020e05fc 0x00000000
+/********************************************/
+
+/* CLOCK */
+wm 32 0x020e032c 0x00000030
+/********************************************/
+
+/* ADDRESS */
+wm 32 0x020e0300 0x00000020
+wm 32 0x020e02fc 0x00000020
+wm 32 0x020e05f4 0x00000020
+/********************************************/
+
+/* CONTROL */
+wm 32 0x020e0340 0x00000020
+
+wm 32 0x020e0320 0x00000000
+wm 32 0x020e0310 0x00000020
+wm 32 0x020e0314 0x00000020
+wm 32 0x020e0614 0x00000020
+/********************************************/
+
+/* DATA STROBE */
+wm 32 0x020e05f8 0x00020000
+wm 32 0x020e0330 0x00000028
+wm 32 0x020e0334 0x00000028
+wm 32 0x020e0338 0x00000028
+wm 32 0x020e033c 0x00000028
+/********************************************/
+
+/* DATA */
+wm 32 0x020e0608 0x00020000
+wm 32 0x020e060c 0x00000028
+wm 32 0x020e0610 0x00000028
+wm 32 0x020e061c 0x00000028
+wm 32 0x020e0620 0x00000028
+wm 32 0x020e02ec 0x00000028
+wm 32 0x020e02f0 0x00000028
+wm 32 0x020e02f4 0x00000028
+wm 32 0x020e02f8 0x00000028
+/********************************************/
+
+/* Calibrations */
+/* ZQ */
+wm 32 0x021b0800 0xa1390003
+/********************************************/
+
+/* write leveling */
+wm 32 0x021b080c 0x000E000B
+wm 32 0x021b0810 0x000E0010
+/********************************************/
+
+/* DQS Read Gate */
+wm 32 0x021b083c 0x41600158
+wm 32 0x021b0840 0x01500140
+/********************************************/
+
+/* Read/Write Delay */
+wm 32 0x021b0848 0x3A383E3E
+wm 32 0x021b0850 0x3A383C38
+/********************************************/
+
+/* read data bit delay */
+wm 32 0x021b081c 0x33333333
+wm 32 0x021b0820 0x33333333
+wm 32 0x021b0824 0x33333333
+wm 32 0x021b0828 0x33333333
+/********************************************/
+
+/* Complete calibration by forced measurment */
+wm 32 0x021b08b8 0x00000800
+/********************************************/
+
+/* MMDC init */
+/* in DDR3, 64-bit mode, only MMDC0 is initiated */
+wm 32 0x021b0004 0x0002002d
+wm 32 0x021b0008 0x00333030
+wm 32 0x021b000c 0x676b52f3
+wm 32 0x021b0010 0xb66d8b63
+wm 32 0x021b0014 0x01ff00db
+wm 32 0x021b0018 0x00011740
+wm 32 0x021b001c 0x00008000
+wm 32 0x021b002c 0x000026d2
+wm 32 0x021b0030 0x006b1023
+wm 32 0x021b0040 0x0000005f
+wm 32 0x021b0000 0x83190000
+/********************************************/
+
+/* Initialize MT41K256M16HA-125 */
+/* MR2 */
+wm 32 0x021b001c 0x04008032
+/* MR3 */
+wm 32 0x021b001c 0x00008033
+/* MR1 */
+wm 32 0x021b001c 0x00048031
+/* MR0 */
+wm 32 0x021b001c 0x05208030
+/* DDR device ZQ calibration */
+wm 32 0x021b001c 0x04008040
+/********************************************/
+
+/* final DDR setup, before operation start */
+wm 32 0x021b0020 0x00000800
+wm 32 0x021b0818 0x00011117
+wm 32 0x021b001c 0x00000000
+/********************************************/
diff --git a/arch/arm/boards/udoo-neo/lowlevel.c b/arch/arm/boards/udoo-neo/lowlevel.c
new file mode 100644
index 000000000..bb6b7d833
--- /dev/null
+++ b/arch/arm/boards/udoo-neo/lowlevel.c
@@ -0,0 +1,39 @@
+#include <debug_ll.h>
+#include <common.h>
+#include <linux/sizes.h>
+#include <mach/generic.h>
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+#include <mach/esdctl.h>
+
+static inline void setup_uart(void)
+{
+	void __iomem *iomuxbase = (void *)MX6_IOMUXC_BASE_ADDR;
+
+	imx6_ungate_all_peripherals();
+
+	writel(0x0, iomuxbase + 0x24);
+	writel(0x1b0b1, iomuxbase + 0x036C);
+	writel(0x0, iomuxbase + 0x28);
+	writel(0x1b0b1, iomuxbase + 0x0370);
+
+	imx6_uart_setup_ll();
+
+	putc_ll('>');
+}
+
+extern char __dtb_imx6sx_udoo_neo_full_start[];
+
+ENTRY_FUNCTION(start_imx6sx_udoo_neo, r0, r1, r2)
+{
+	void *fdt;
+
+	imx6_cpu_lowlevel_init();
+
+	if (IS_ENABLED(CONFIG_DEBUG_LL))
+		setup_uart();
+
+	fdt = __dtb_imx6sx_udoo_neo_full_start + get_runtime_offset();
+
+	imx6sx_barebox_entry(fdt);
+}
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index c08b35a10..1c6bfd900 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -99,6 +99,7 @@ pbl-dtb-$(CONFIG_MACH_TX6X) += imx6dl-tx6u.dtb.o
 pbl-dtb-$(CONFIG_MACH_TX6X) += imx6q-tx6q.dtb.o
 pbl-dtb-$(CONFIG_MACH_TURRIS_OMNIA) += armada-385-turris-omnia-bb.dtb.o
 pbl-dtb-$(CONFIG_MACH_UDOO) += imx6q-udoo.dtb.o
+pbl-dtb-$(CONFIG_MACH_UDOO_NEO) += imx6sx-udoo-neo-full.dtb.o
 pbl-dtb-$(CONFIG_MACH_USI_TOPKICK) += kirkwood-topkick-bb.dtb.o
 pbl-dtb-$(CONFIG_MACH_VARISCITE_MX6) += imx6q-var-custom.dtb.o
 pbl-dtb-$(CONFIG_MACH_VEXPRESS) += vexpress-v2p-ca9.dtb.o
diff --git a/arch/arm/dts/imx6sx-udoo-neo-full.dts b/arch/arm/dts/imx6sx-udoo-neo-full.dts
new file mode 100644
index 000000000..9203d4020
--- /dev/null
+++ b/arch/arm/dts/imx6sx-udoo-neo-full.dts
@@ -0,0 +1,4 @@
+#include <arm/imx6sx-udoo-neo-full.dts>
+
+/{
+};
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index d9b60053d..53226c559 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -384,6 +384,10 @@ config MACH_UDOO
 	bool "Freescale i.MX6 UDOO Board"
 	select ARCH_IMX6
 
+config MACH_UDOO_NEO
+	bool "i.MX6 UDOO Neo Board (full variant)"
+	select ARCH_IMX6SX
+
 config MACH_VARISCITE_MX6
 	bool "Variscite i.MX6 Quad SOM"
 	select ARCH_IMX6
diff --git a/arch/arm/mach-imx/include/mach/esdctl.h b/arch/arm/mach-imx/include/mach/esdctl.h
index bc6c73395..18c4a2836 100644
--- a/arch/arm/mach-imx/include/mach/esdctl.h
+++ b/arch/arm/mach-imx/include/mach/esdctl.h
@@ -141,6 +141,7 @@ void __noreturn imx6ul_barebox_entry(void *boarddata);
 void __noreturn vf610_barebox_entry(void *boarddata);
 void __noreturn imx8mq_barebox_entry(void *boarddata);
 void __noreturn imx7d_barebox_entry(void *boarddata);
+#define imx6sx_barebox_entry(boarddata) imx6ul_barebox_entry(boarddata)
 void imx_esdctl_disable(void);
 #endif
 
diff --git a/images/Makefile.imx b/images/Makefile.imx
index 8b8a5452b..4f6fd0489 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
@@ -254,6 +254,11 @@ CFG_start_imx6q_sabresd.pblb.imximg = $(board)/freescale-mx6-sabresd/flash-heade
 FILE_barebox-freescale-imx6q-sabresd.img = start_imx6q_sabresd.pblb.imximg
 image-$(CONFIG_MACH_SABRESD) += barebox-freescale-imx6q-sabresd.img
 
+pblb-$(CONFIG_MACH_UDOO_NEO) += start_imx6sx_udoo_neo
+CFG_start_imx6sx_udoo_neo.pblb.imximg = $(board)/udoo-neo/flash-header-mx6sx-udoo-neo_full.imxcfg
+FILE_barebox-udoo-neo.img = start_imx6sx_udoo_neo.pblb.imximg
+image-$(CONFIG_MACH_UDOO_NEO) += barebox-udoo-neo.img
+
 pblb-$(CONFIG_MACH_FREESCALE_IMX6SX_SABRESDB) += start_imx6sx_sabresdb
 CFG_start_imx6sx_sabresdb.pblb.imximg = $(board)/freescale-mx6sx-sabresdb/flash-header-mx6sx-sabresdb.imxcfg
 FILE_barebox-freescale-imx6sx-sabresdb.img = start_imx6sx_sabresdb.pblb.imximg
-- 
2.11.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2019-01-16  9:30 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-16  9:29 Rouven Czerwinski [this message]
2019-01-17  8:35 ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190116092952.31011-1-r.czerwinski@pengutronix.de \
    --to=r.czerwinski@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox