[RESEND] [PATCH 2/2] Documentation: i.MX: Kindle 4/5: fix sphinx warnings

[Roland Hieber <rhi@pengutronix.de>]

sphinx warns:

  Documentation/boards/imx/amazon-kindle-4-5.rst:39: WARNING: Enumerated list ends without a blank line; unexpected unindent.
  Documentation/boards/imx/amazon-kindle-4-5.rst:42: WARNING: Enumerated list ends without a blank line; unexpected unindent.
  Documentation/boards/imx/amazon-kindle-4-5.rst:45: WARNING: Enumerated list ends without a blank line; unexpected unindent.

Solve this by fixing the list enumeration and adding blank lines.

Signed-off-by: Roland Hieber <rhi@pengutronix.de>
---
 Documentation/boards/imx/amazon-kindle-4-5.rst | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/boards/imx/amazon-kindle-4-5.rst b/Documentation/boards/imx/amazon-kindle-4-5.rst
index 58f38a058e..26f072e28d 100644
--- a/Documentation/boards/imx/amazon-kindle-4-5.rst
+++ b/Documentation/boards/imx/amazon-kindle-4-5.rst
@@ -36,13 +36,15 @@ USB bootloader mode by the SoC microcode:
 1. Connect the Kindle to your host computer with a USB cable.
 2. Power down the device by holding the power button until the power LED goes
    dark (about 10 seconds).
-4. Hold the power button, and hold down a device-specific special key:
+3. Hold the power button, and hold down a device-specific special key:
+
    * the fiveway down button on the model D01100
    * the home button on model D01200
+
 4. Then release the power button, but still hold the special key.
 5. A new USB device named ``NS Blank CODEX`` should appear on your host computer.
    You can now release the special button.
-7. Finally, upload barebox to the Kindle by using:
+6. Finally, upload barebox to the Kindle by using:
 
    .. code-block:: console
 
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox