* [PATCH] treewide: Remove trailing whitespaces and tabs
@ 2019-01-20 6:23 Alexander Shiyan
2019-01-21 7:50 ` Sascha Hauer
0 siblings, 1 reply; 2+ messages in thread
From: Alexander Shiyan @ 2019-01-20 6:23 UTC (permalink / raw)
To: barebox
Just a cleanup over barebox tree
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/boards/nxp-imx8mq-evk/ddr_init.c | 4 ++--
arch/arm/mach-imx/include/mach/iomux-mx8.h | 2 +-
arch/arm/mach-mvebu/armada-370-xp.c | 6 +++---
common/image-fit.c | 2 +-
drivers/clk/imx/clk-imx7.c | 2 +-
drivers/efi/efi-device.c | 2 +-
drivers/pci/pcie-designware-host.c | 2 +-
fs/cramfs/cramfs.c | 2 +-
scripts/kconfig/gconf.c | 2 +-
scripts/socfpga_mkimage.c | 2 +-
10 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boards/nxp-imx8mq-evk/ddr_init.c b/arch/arm/boards/nxp-imx8mq-evk/ddr_init.c
index 44103b5..39addea 100644
--- a/arch/arm/boards/nxp-imx8mq-evk/ddr_init.c
+++ b/arch/arm/boards/nxp-imx8mq-evk/ddr_init.c
@@ -12,7 +12,7 @@ void ddr_cfg_phy(void);
void ddr_init(void)
{
volatile unsigned int tmp, tmp_t;
-
+
/** Initialize DDR clock and DDRC registers **/
reg32_write(0x3038a088,0x7070000);
reg32_write(0x3038a084,0x4030000);
@@ -177,7 +177,7 @@ void ddr_init(void)
reg32_write(DDRC_SWCTL(0), 0x0000);
/*
* ------------------- 9 -------------------
- * Set DFIMISC.dfi_init_start to 1
+ * Set DFIMISC.dfi_init_start to 1
* -----------------------------------------
*/
reg32_write(DDRC_DFIMISC(0), 0x00000030);
diff --git a/arch/arm/mach-imx/include/mach/iomux-mx8.h b/arch/arm/mach-imx/include/mach/iomux-mx8.h
index 1caa223..9660697 100644
--- a/arch/arm/mach-imx/include/mach/iomux-mx8.h
+++ b/arch/arm/mach-imx/include/mach/iomux-mx8.h
@@ -163,7 +163,7 @@ enum {
IMX8MQ_PAD_SD1_DATA5__USDHC1_DATA5 = IOMUX_PAD(0x0324, 0x00BC, 0, 0x0000, 0, 0),
IMX8MQ_PAD_SD1_DATA5__GPIO2_IO7 = IOMUX_PAD(0x0324, 0x00BC, 5, 0x0000, 0, 0),
- IMX8MQ_PAD_SD1_DATA6__USDHC1_DATA6 = IOMUX_PAD(0x0328, 0x00C0, 0, 0x0000, 0, 0),
+ IMX8MQ_PAD_SD1_DATA6__USDHC1_DATA6 = IOMUX_PAD(0x0328, 0x00C0, 0, 0x0000, 0, 0),
IMX8MQ_PAD_SD1_DATA6__GPIO2_IO8 = IOMUX_PAD(0x0328, 0x00C0, 5, 0x0000, 0, 0),
IMX8MQ_PAD_SD1_DATA7__USDHC1_DATA7 = IOMUX_PAD(0x032C, 0x00C4, 0, 0x0000, 0, 0),
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index 0612830..2589f4f 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -105,12 +105,12 @@ static void setup_usb_phys(void)
/* Power up PLL and PHY channel */
setbits_le32(MV_USB_PHY_PLL_REG(2), BIT(9));
-
+
/* Assert VCOCAL_START */
setbits_le32(MV_USB_PHY_PLL_REG(1), BIT(21));
-
+
mdelay(1);
-
+
/*
* USB PHY init (change from defaults) specific for 40nm (78X30 78X60)
*/
diff --git a/common/image-fit.c b/common/image-fit.c
index 87a55b7..6ac4644 100644
--- a/common/image-fit.c
+++ b/common/image-fit.c
@@ -368,7 +368,7 @@ static int fit_verify_signature(struct device_node *sig_node, const void *fit)
out_sl:
string_list_free(&inc_nodes);
string_list_free(&exc_props);
-
+
return ret;
}
diff --git a/drivers/clk/imx/clk-imx7.c b/drivers/clk/imx/clk-imx7.c
index 97fe7ab..781bc43 100644
--- a/drivers/clk/imx/clk-imx7.c
+++ b/drivers/clk/imx/clk-imx7.c
@@ -743,7 +743,7 @@ static int imx7_ccm_probe(struct device_d *dev)
"enet_axi_post_div", base + 0x4700, 0);
clks[IMX7D_ENET1_TIME_ROOT_CLK] = imx_clk_gate2_shared2("enet1_time_root_clk",
"enet1_time_post_div", base + 0x4700, 0);
- clks[IMX7D_ENET2_IPG_ROOT_CLK] = imx_clk_gate2_shared2("enet2_ipg_root_clk",
+ clks[IMX7D_ENET2_IPG_ROOT_CLK] = imx_clk_gate2_shared2("enet2_ipg_root_clk",
"enet_axi_post_div", base + 0x4710, 0);
clks[IMX7D_ENET2_TIME_ROOT_CLK] = imx_clk_gate2_shared2("enet2_time_root_clk",
"enet2_time_post_div", base + 0x4710, 0);
diff --git a/drivers/efi/efi-device.c b/drivers/efi/efi-device.c
index b7dea7c..5cc68fb 100644
--- a/drivers/efi/efi-device.c
+++ b/drivers/efi/efi-device.c
@@ -551,7 +551,7 @@ static int do_efi_protocol_dump(int argc, char **argv)
if (len != 36)
return -EINVAL;
-
+
read_xbit(s, a, 32);
if (*s != '-')
return -EINVAL;
diff --git a/drivers/pci/pcie-designware-host.c b/drivers/pci/pcie-designware-host.c
index 6cc4b93..cc6a41b 100644
--- a/drivers/pci/pcie-designware-host.c
+++ b/drivers/pci/pcie-designware-host.c
@@ -391,7 +391,7 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
pci->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pci);
dev_dbg(pci->dev, "iATU unroll: %s\n",
pci->iatu_unroll_enabled ? "enabled" : "disabled");
-
+
dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX0,
PCIE_ATU_TYPE_MEM, pp->mem_mod_base,
pp->mem_bus_addr, pp->mem_size);
diff --git a/fs/cramfs/cramfs.c b/fs/cramfs/cramfs.c
index a3ce354..093657f 100644
--- a/fs/cramfs/cramfs.c
+++ b/fs/cramfs/cramfs.c
@@ -335,7 +335,7 @@ static struct inode *cramfs_alloc_inode(struct super_block *sb)
struct cramfs_inode_info *info;
info = xzalloc(sizeof(*info));
-
+
return &info->i_inode;
}
diff --git a/scripts/kconfig/gconf.c b/scripts/kconfig/gconf.c
index 36f5784..0ac700b 100644
--- a/scripts/kconfig/gconf.c
+++ b/scripts/kconfig/gconf.c
@@ -640,7 +640,7 @@ on_set_option_mode3_activate(GtkMenuItem *menuitem, gpointer user_data)
void on_introduction1_activate(GtkMenuItem * menuitem, gpointer user_data)
{
GtkWidget *dialog;
- const gchar *intro_text =
+ const gchar *intro_text =
"Welcome to gkc, the GTK+ graphical configuration tool\n"
"For each option, a blank box indicates the feature is disabled, a\n"
"check indicates it is enabled, and a dot indicates that it is to\n"
diff --git a/scripts/socfpga_mkimage.c b/scripts/socfpga_mkimage.c
index fedcfb5..03150cc 100644
--- a/scripts/socfpga_mkimage.c
+++ b/scripts/socfpga_mkimage.c
@@ -157,7 +157,7 @@ uint32_t crc32(uint32_t crc, void *_buf, int length)
return crc;
}
-/* Create an ARM relative branch instuction
+/* Create an ARM relative branch instuction
* branch is where the instruction will be placed and dest points to where
* it should branch too. */
static void branch(uint8_t *branch, uint8_t *dest)
--
2.10.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [PATCH] treewide: Remove trailing whitespaces and tabs
2019-01-20 6:23 [PATCH] treewide: Remove trailing whitespaces and tabs Alexander Shiyan
@ 2019-01-21 7:50 ` Sascha Hauer
0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2019-01-21 7:50 UTC (permalink / raw)
To: Alexander Shiyan; +Cc: barebox
On Sun, Jan 20, 2019 at 09:23:52AM +0300, Alexander Shiyan wrote:
> Just a cleanup over barebox tree
>
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> ---
> arch/arm/boards/nxp-imx8mq-evk/ddr_init.c | 4 ++--
> arch/arm/mach-imx/include/mach/iomux-mx8.h | 2 +-
> arch/arm/mach-mvebu/armada-370-xp.c | 6 +++---
> common/image-fit.c | 2 +-
> drivers/clk/imx/clk-imx7.c | 2 +-
> drivers/efi/efi-device.c | 2 +-
> drivers/pci/pcie-designware-host.c | 2 +-
> fs/cramfs/cramfs.c | 2 +-
> scripts/kconfig/gconf.c | 2 +-
> scripts/socfpga_mkimage.c | 2 +-
> 10 files changed, 13 insertions(+), 13 deletions(-)
Applied, thanks
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-01-21 7:50 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-20 6:23 [PATCH] treewide: Remove trailing whitespaces and tabs Alexander Shiyan
2019-01-21 7:50 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox