[PATCH 1/3] Documentation: imx8mq-evk: point to current version of the firmware

[PATCH 1/3] Documentation: imx8mq-evk: point to current version of the firmware

[Lucas Stach]

There were some updates to the i.MX8MQ DDR training firmware, so better
point to the current version.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 Documentation/boards/imx/nxp-imx8mq-evk.rst | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/boards/imx/nxp-imx8mq-evk.rst b/Documentation/boards/imx/nxp-imx8mq-evk.rst
index dfe004e0e434..ba8cf01452d6 100644
--- a/Documentation/boards/imx/nxp-imx8mq-evk.rst
+++ b/Documentation/boards/imx/nxp-imx8mq-evk.rst
@@ -16,9 +16,9 @@ uses several binary firmware blobs that are distributed under a
 separate EULA and cannot be included in Barebox. In order to obtain
 them do the following::
 
- wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.2.bin
- chmod +x firmware-imx-7.2.bin
- ./firmware-imx-7.2.bin
+ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
+ chmod +x firmware-imx-8.0.bin
+ ./firmware-imx-8.0.bin
 
 Executing that file should produce a EULA acceptance dialog as well as
 result in the following files:
@@ -36,7 +36,7 @@ As a last step of this process those files need to be placed in
 	   lpddr4_pmu_train_2d_dmem.bin  \
 	   lpddr4_pmu_train_2d_imem.bin; \
   do \
-	   cp firmware-imx-7.2/firmware/ddr/synopsys/${f} \
+	   cp firmware-imx-8.0/firmware/ddr/synopsys/${f} \
 	      firmware/imx/${f}; \
   done
 
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 2/3] Documentation: imx8mq-evk: add instructions for HDMITX firmware

[Lucas Stach]

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 Documentation/boards/imx/nxp-imx8mq-evk.rst | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/Documentation/boards/imx/nxp-imx8mq-evk.rst b/Documentation/boards/imx/nxp-imx8mq-evk.rst
index ba8cf01452d6..250e51743842 100644
--- a/Documentation/boards/imx/nxp-imx8mq-evk.rst
+++ b/Documentation/boards/imx/nxp-imx8mq-evk.rst
@@ -8,8 +8,8 @@ Board comes with:
 
 Not including booting via serial, the device can boot from either SD or eMMC.
 
-Downloading DDR PHY Firmware
-----------------------------
+Downloading DDR PHY and HDMI/eDP Firmware
+-----------------------------------------
 
 As a part of DDR intialization routine NXP i.MX8MQ EVK requires and
 uses several binary firmware blobs that are distributed under a
@@ -40,6 +40,16 @@ As a last step of this process those files need to be placed in
 	      firmware/imx/${f}; \
   done
 
+You will also need to copy the HDMITX controller firmware in order to
+use the HDMI and/or eDP display output::
+
+  for f in signed_dp_imx8m.bin \
+	   signed_hdmi_imx8m.bin; \
+  do \
+	   cp firmware-imx-8.0/firmware/hdmi/cadence/${f} \
+	      firmware/imx/${f}; \
+  done
+
 DDR Configuration Code
 ======================
 
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 3/3] ARM: nxp-imx8mq-evk: include the HDMI firmware in the image

[Lucas Stach]

The board has a HDMI output by default, so it makes sense to include
the necessary firmware for this.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 arch/arm/boards/nxp-imx8mq-evk/flash-header-imx8mq-evk.imxcfg | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boards/nxp-imx8mq-evk/flash-header-imx8mq-evk.imxcfg b/arch/arm/boards/nxp-imx8mq-evk/flash-header-imx8mq-evk.imxcfg
index aff8321b9ad6..b0016372314a 100644
--- a/arch/arm/boards/nxp-imx8mq-evk/flash-header-imx8mq-evk.imxcfg
+++ b/arch/arm/boards/nxp-imx8mq-evk/flash-header-imx8mq-evk.imxcfg
@@ -3,3 +3,4 @@ soc imx8mq
 loadaddr 0x007E1000
 max_load_size 0x3F000
 dcdofs 0x400
+signed_hdmi_firmware firmware/imx/signed_hdmi_imx8m.bin
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 1/3] Documentation: imx8mq-evk: point to current version of the firmware

[Sascha Hauer]

On Fri, Jan 25, 2019 at 06:06:38PM +0100, Lucas Stach wrote:
> There were some updates to the i.MX8MQ DDR training firmware, so better
> point to the current version.
> 
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>  Documentation/boards/imx/nxp-imx8mq-evk.rst | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)

Applied, thanks

Sascha

> 
> diff --git a/Documentation/boards/imx/nxp-imx8mq-evk.rst b/Documentation/boards/imx/nxp-imx8mq-evk.rst
> index dfe004e0e434..ba8cf01452d6 100644
> --- a/Documentation/boards/imx/nxp-imx8mq-evk.rst
> +++ b/Documentation/boards/imx/nxp-imx8mq-evk.rst
> @@ -16,9 +16,9 @@ uses several binary firmware blobs that are distributed under a
>  separate EULA and cannot be included in Barebox. In order to obtain
>  them do the following::
>  
> - wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.2.bin
> - chmod +x firmware-imx-7.2.bin
> - ./firmware-imx-7.2.bin
> + wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
> + chmod +x firmware-imx-8.0.bin
> + ./firmware-imx-8.0.bin
>  
>  Executing that file should produce a EULA acceptance dialog as well as
>  result in the following files:
> @@ -36,7 +36,7 @@ As a last step of this process those files need to be placed in
>  	   lpddr4_pmu_train_2d_dmem.bin  \
>  	   lpddr4_pmu_train_2d_imem.bin; \
>    do \
> -	   cp firmware-imx-7.2/firmware/ddr/synopsys/${f} \
> +	   cp firmware-imx-8.0/firmware/ddr/synopsys/${f} \
>  	      firmware/imx/${f}; \
>    done
>  
> -- 
> 2.20.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 3/3] ARM: nxp-imx8mq-evk: include the HDMI firmware in the image

[Sascha Hauer]

On Fri, Jan 25, 2019 at 06:06:40PM +0100, Lucas Stach wrote:
> The board has a HDMI output by default, so it makes sense to include
> the necessary firmware for this.
> 
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>  arch/arm/boards/nxp-imx8mq-evk/flash-header-imx8mq-evk.imxcfg | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/boards/nxp-imx8mq-evk/flash-header-imx8mq-evk.imxcfg b/arch/arm/boards/nxp-imx8mq-evk/flash-header-imx8mq-evk.imxcfg
> index aff8321b9ad6..b0016372314a 100644
> --- a/arch/arm/boards/nxp-imx8mq-evk/flash-header-imx8mq-evk.imxcfg
> +++ b/arch/arm/boards/nxp-imx8mq-evk/flash-header-imx8mq-evk.imxcfg
> @@ -3,3 +3,4 @@ soc imx8mq
>  loadaddr 0x007E1000
>  max_load_size 0x3F000
>  dcdofs 0x400
> +signed_hdmi_firmware firmware/imx/signed_hdmi_imx8m.bin

The HDMI firmware is not part of this commit, so this breaks the build.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox