From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH v2 13/15] PCI: imx6: Mark PHY functions as i.MX6 specific
Date: Tue, 5 Feb 2019 13:54:09 -0800 [thread overview]
Message-ID: <20190205215411.589-14-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20190205215411.589-1-andrew.smirnov@gmail.com>
Port of a Linux commit 2f532d07f0cce72f88a4a0532ae11be6a2745697
PCIe PHY IP block on i.MX7D differs from the one used on i.MX6 family,
so none of the code in the current implementation of
imx6_setup_phy_mpll() or imx6_pcie_reset_phy() is applicable.
Introduce IMX6_PCIE_FLAG_IMX6_PHY and check for it in the aforementioned
functions to make sure they are only executed on appropriate PCIe IP
variants.
Tested-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[lorenzo.pieralisi@arm.com: updated log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "A.s. Dong" <aisheng.dong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/pci/pci-imx6.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/pci/pci-imx6.c b/drivers/pci/pci-imx6.c
index dcebd7658..2911a019c 100644
--- a/drivers/pci/pci-imx6.c
+++ b/drivers/pci/pci-imx6.c
@@ -42,8 +42,11 @@ enum imx6_pcie_variants {
IMX7D,
};
+#define IMX6_PCIE_FLAG_IMX6_PHY BIT(0)
+
struct imx6_pcie_drvdata {
enum imx6_pcie_variants variant;
+ u32 flags;
};
struct imx6_pcie {
@@ -235,6 +238,9 @@ static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie)
{
uint32_t temp;
+ if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_IMX6_PHY))
+ return;
+
pcie_phy_read(imx6_pcie, PHY_RX_OVRD_IN_LO, &temp);
temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN |
PHY_RX_OVRD_IN_LO_RX_PLL_EN);
@@ -756,9 +762,11 @@ static void imx6_pcie_remove(struct device_d *dev)
static const struct imx6_pcie_drvdata drvdata[] = {
[IMX6Q] = {
.variant = IMX6Q,
+ .flags = IMX6_PCIE_FLAG_IMX6_PHY,
},
[IMX6QP] = {
.variant = IMX6QP,
+ .flags = IMX6_PCIE_FLAG_IMX6_PHY,
},
[IMX7D] = {
.variant = IMX7D,
--
2.20.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2019-02-05 21:54 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-05 21:53 [PATCH v2 00/15] PCIE support for i.MX8MQ Andrey Smirnov
2019-02-05 21:53 ` [PATCH v2 01/15] PCI: dwc: Fix pointer width cast problem Andrey Smirnov
2019-02-05 21:53 ` [PATCH v2 02/15] ARM: aarch64: Add PCI fixups section to linker script Andrey Smirnov
2019-02-05 21:53 ` [PATCH v2 03/15] soc: imx: gpcv2: use A_CORE instread of A7 for more i.MX platforms Andrey Smirnov
2019-02-05 21:54 ` [PATCH v2 04/15] soc: imx: gpcv2: make pgc driver more generic for other " Andrey Smirnov
2019-02-05 21:54 ` [PATCH v2 05/15] soc: imx: gpcv2: Switch to SPDX identifier Andrey Smirnov
2019-02-05 21:54 ` [PATCH v2 06/15] soc: imx: gpcv2: prefix i.MX7 specific defines Andrey Smirnov
2019-02-05 21:54 ` [PATCH v2 07/15] soc: imx: gpcv2: add support for i.MX8MQ SoC Andrey Smirnov
2019-02-05 21:54 ` [PATCH v2 08/15] reset: Constify "ops" in struct reset_controller_dev Andrey Smirnov
2019-02-05 21:54 ` [PATCH v2 09/15] reset: imx7: Add plubming to support multiple IP variants Andrey Smirnov
2019-02-05 21:54 ` [PATCH v2 10/15] include: Import dt-bindings/reset/imx8mq-reset.h Andrey Smirnov
2019-02-05 21:54 ` [PATCH v2 11/15] reset: imx7: Add support for i.MX8MQ IP block variant Andrey Smirnov
2019-02-05 21:54 ` [PATCH v2 12/15] PCI: imx6: Introduce drvdata Andrey Smirnov
2019-02-05 21:54 ` Andrey Smirnov [this message]
2019-02-05 21:54 ` [PATCH v2 14/15] PCI: imx6: Convert DIRECT_SPEED_CHANGE quirk code to use a flag Andrey Smirnov
2019-02-05 21:54 ` [PATCH v2 15/15] PCI: imx6: Add support for i.MX8MQ Andrey Smirnov
2019-02-07 7:53 ` [PATCH v2 00/15] PCIE " Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190205215411.589-14-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox