* [PATCH] ARM: phyCORE-i.MX8M SOM support
@ 2019-02-06 18:41 Christian Hemp
2019-02-07 1:20 ` Andrey Smirnov
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Christian Hemp @ 2019-02-06 18:41 UTC (permalink / raw)
To: barebox; +Cc: Christian Hemp
The phyCORE-i.MX8M aka PCL-066 is a SoM containing a i.MX8M SoC.
phyCORE-i.MX8M:
- 1GB LPDDR4 RAM
- eMMC
- microSD
- Ethernet
Signed-off-by: Christian Hemp <christian.hemp@posteo.de>
---
arch/arm/boards/Makefile | 1 +
arch/arm/boards/phytec-som-imx8m/.gitignore | 1 +
arch/arm/boards/phytec-som-imx8m/Makefile | 2 +
arch/arm/boards/phytec-som-imx8m/board.c | 55 +
arch/arm/boards/phytec-som-imx8m/ddr.h | 28 +
arch/arm/boards/phytec-som-imx8m/ddr_init.c | 225 +++++
.../boards/phytec-som-imx8m/ddrphy_train.c | 947 ++++++++++++++++++
| 5 +
arch/arm/boards/phytec-som-imx8m/lowlevel.c | 127 +++
arch/arm/configs/imx_v8_defconfig | 2 +
arch/arm/dts/Makefile | 1 +
arch/arm/dts/imx8mq-phytec-phycore-som.dts | 328 ++++++
arch/arm/mach-imx/Kconfig | 7 +
images/Makefile.imx | 5 +
14 files changed, 1734 insertions(+)
create mode 100644 arch/arm/boards/phytec-som-imx8m/.gitignore
create mode 100644 arch/arm/boards/phytec-som-imx8m/Makefile
create mode 100644 arch/arm/boards/phytec-som-imx8m/board.c
create mode 100644 arch/arm/boards/phytec-som-imx8m/ddr.h
create mode 100644 arch/arm/boards/phytec-som-imx8m/ddr_init.c
create mode 100644 arch/arm/boards/phytec-som-imx8m/ddrphy_train.c
create mode 100644 arch/arm/boards/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg
create mode 100644 arch/arm/boards/phytec-som-imx8m/lowlevel.c
create mode 100644 arch/arm/dts/imx8mq-phytec-phycore-som.dts
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index ab5191fe0..b39bbe8c2 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_MACH_PCM049) += phytec-phycore-omap4460/
obj-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += phytec-som-am335x/
obj-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += phytec-som-imx6/
obj-$(CONFIG_MACH_PHYTEC_PHYCORE_IMX7) += phytec-phycore-imx7/
+obj-$(CONFIG_MACH_PHYTEC_SOM_IMX8M) += phytec-som-imx8m/
obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3) += plathome-openblocks-ax3/
obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += plathome-openblocks-a6/
obj-$(CONFIG_MACH_PM9261) += pm9261/
diff --git a/arch/arm/boards/phytec-som-imx8m/.gitignore b/arch/arm/boards/phytec-som-imx8m/.gitignore
new file mode 100644
index 000000000..ef13747c9
--- /dev/null
+++ b/arch/arm/boards/phytec-som-imx8m/.gitignore
@@ -0,0 +1 @@
+*.ddr-phy-fw*
diff --git a/arch/arm/boards/phytec-som-imx8m/Makefile b/arch/arm/boards/phytec-som-imx8m/Makefile
new file mode 100644
index 000000000..2995f06f0
--- /dev/null
+++ b/arch/arm/boards/phytec-som-imx8m/Makefile
@@ -0,0 +1,2 @@
+obj-y += board.o
+lwl-y += lowlevel.o ddr_init.o ddrphy_train.o
diff --git a/arch/arm/boards/phytec-som-imx8m/board.c b/arch/arm/boards/phytec-som-imx8m/board.c
new file mode 100644
index 000000000..7779946d1
--- /dev/null
+++ b/arch/arm/boards/phytec-som-imx8m/board.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2018 Christian Hemp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation.
+ *
+ */
+
+#include <asm/memory.h>
+#include <bootsource.h>
+#include <environment.h>
+#include <common.h>
+#include <init.h>
+#include <linux/sizes.h>
+#include <mach/bbu.h>
+
+#include <envfs.h>
+
+static int physom_imx8m_devices_init(void)
+{
+ int flags;
+
+ if (!of_machine_is_compatible("phytec,imx8mq-pcl066"))
+ return 0;
+
+ barebox_set_hostname("phycore-imx8mq");
+
+ flags = bootsource_get_instance() == 0 ? BBU_HANDLER_FLAG_DEFAULT : 0;
+ imx8mq_bbu_internal_mmc_register_handler("eMMC",
+ "/dev/mmc0.barebox", flags);
+
+ flags = bootsource_get_instance() == 1 ? BBU_HANDLER_FLAG_DEFAULT : 0;
+ imx8mq_bbu_internal_mmc_register_handler("SD",
+ "/dev/mmc1.barebox", flags);
+
+ if (bootsource_get_instance() == 0)
+ of_device_enable_path("/chosen/environment-emmc");
+ else
+ of_device_enable_path("/chosen/environment-sd");
+
+ return 0;
+}
+device_initcall(physom_imx8m_devices_init);
+
diff --git a/arch/arm/boards/phytec-som-imx8m/ddr.h b/arch/arm/boards/phytec-som-imx8m/ddr.h
new file mode 100644
index 000000000..7d195e600
--- /dev/null
+++ b/arch/arm/boards/phytec-som-imx8m/ddr.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2018 Christian Hemp
+ *
+ * Varios wrappers and macros needed to intgrate code generated by
+ * i.MX8M DDR Tool into rest of Barebox
+ */
+#include <common.h>
+#include <io.h>
+#include <mach/imx8-ddrc.h>
+
+/*
+ * Code generated by i.MX8 M DDR Tool doesn't have any prefixes in the
+ * global identifiers below, so in order to avoid symbol name
+ * collisions with other boards we re-name them via a #define
+ */
+#define ddr_init phytec_imx8mq_phycore_ddr_init
+#define ddr_cfg_phy phytec_imx8mq_phycore_ddr_cfg_phy
+
+void phytec_imx8mq_phycore_ddr_init(void);
+void phytec_imx8mq_phycore_ddr_cfg_phy(void);
+
+#define FW_1D_IMAGE imx_lpddr4_pmu_train_1d_imem_bin, \
+ imx_lpddr4_pmu_train_1d_dmem_bin
+#define FW_2D_IMAGE imx_lpddr4_pmu_train_2d_imem_bin, \
+ imx_lpddr4_pmu_train_2d_dmem_bin
+
+
diff --git a/arch/arm/boards/phytec-som-imx8m/ddr_init.c b/arch/arm/boards/phytec-som-imx8m/ddr_init.c
new file mode 100644
index 000000000..e4e54fd54
--- /dev/null
+++ b/arch/arm/boards/phytec-som-imx8m/ddr_init.c
@@ -0,0 +1,225 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Generated code from MX8M_DDR_tool
+ * Align with uboot-imx_v2017.03_4.9.51_imx8m_ga
+ */
+
+#include "ddr.h"
+
+void ddr_cfg_phy(void);
+volatile unsigned int tmp, tmp_t, i;
+void ddr_init(void)
+{
+ /** Initialize DDR clock and DDRC registers **/
+ reg32_write(0x3038a088,0x7070000);
+ reg32_write(0x3038a084,0x4030000);
+ reg32_write(0x303a00ec,0xffff);
+ tmp=reg32_read(0x303a00f8);
+ tmp |= 0x20;
+ reg32_write(0x303a00f8,tmp);
+ reg32_write(0x30391000,0x8f000000);
+ reg32_write(0x30391004,0x8f000000);
+ reg32_write(0x30360068,0xece580);
+ tmp=reg32_read(0x30360060);
+ tmp &= ~0x80;
+ reg32_write(0x30360060,tmp);
+ tmp=reg32_read(0x30360060);
+ tmp |= 0x200;
+ reg32_write(0x30360060,tmp);
+ tmp=reg32_read(0x30360060);
+ tmp &= ~0x20;
+ reg32_write(0x30360060,tmp);
+ tmp=reg32_read(0x30360060);
+ tmp &= ~0x10;
+ reg32_write(0x30360060,tmp);
+ do{
+ tmp=reg32_read(0x30360060);
+ if(tmp&0x80000000) break;
+ }while(1);
+ reg32_write(0x30391000,0x8f000006);
+ reg32_write(0x3d400304,0x1);
+ reg32_write(0x3d400030,0x1);
+ reg32_write(0x3d400000,0xa1080020);
+ reg32_write(0x3d400028,0x0);
+ reg32_write(0x3d400020,0x203);
+ reg32_write(0x3d400024,0x186a000);
+ reg32_write(0x3d400064,0x6100e0);
+ reg32_write(0x3d4000d0,0xc003061c);
+ reg32_write(0x3d4000d4,0x9e0000);
+ reg32_write(0x3d4000dc,0xd4002d);
+ reg32_write(0x3d4000e0,0x310008);
+ reg32_write(0x3d4000e8,0x66004a);
+ reg32_write(0x3d4000ec,0x16004a);
+ reg32_write(0x3d400100,0x1a201b22);
+ reg32_write(0x3d400104,0x60633);
+ reg32_write(0x3d40010c,0xc0c000);
+ reg32_write(0x3d400110,0xf04080f);
+ reg32_write(0x3d400114,0x2040c0c);
+ reg32_write(0x3d400118,0x1010007);
+ reg32_write(0x3d40011c,0x401);
+ reg32_write(0x3d400130,0x20600);
+ reg32_write(0x3d400134,0xc100002);
+ reg32_write(0x3d400138,0xe6);
+ reg32_write(0x3d400144,0xa00050);
+ reg32_write(0x3d400180,0xc3200018);
+ reg32_write(0x3d400184,0x28061a8);
+ reg32_write(0x3d400188,0x0);
+ reg32_write(0x3d400190,0x497820a);
+ reg32_write(0x3d400194,0x80303);
+ reg32_write(0x3d4001a0,0xe0400018);
+ reg32_write(0x3d4001a4,0xdf00e4);
+ reg32_write(0x3d4001a8,0x80000000);
+ reg32_write(0x3d4001b0,0x11);
+ reg32_write(0x3d4001b4,0x170a);
+ reg32_write(0x3d4001c0,0x1);
+ reg32_write(0x3d4001c4,0x1);
+ reg32_write(0x3d4000f4,0x639);
+ reg32_write(0x3d400108,0x70e1617);
+ reg32_write(0x3d400200,0x1f);
+ reg32_write(0x3d40020c,0x0);
+ reg32_write(0x3d400210,0x1f1f);
+ reg32_write(0x3d400204,0x80808);
+ reg32_write(0x3d400214,0x7070707);
+ reg32_write(0x3d400218,0xf070707);
+ reg32_write(0x3d402020,0x1);
+ reg32_write(0x3d402024,0x518b00);
+ reg32_write(0x3d402050,0x20d040);
+ reg32_write(0x3d402064,0x14002f);
+ reg32_write(0x3d4020dc,0x940009);
+ reg32_write(0x3d4020e0,0x310000);
+ reg32_write(0x3d4020e8,0x66004a);
+ reg32_write(0x3d4020ec,0x16004a);
+ reg32_write(0x3d402100,0xb070508);
+ reg32_write(0x3d402104,0x3040b);
+ reg32_write(0x3d402108,0x305090c);
+ reg32_write(0x3d40210c,0x505000);
+ reg32_write(0x3d402110,0x4040204);
+ reg32_write(0x3d402114,0x2030303);
+ reg32_write(0x3d402118,0x1010004);
+ reg32_write(0x3d40211c,0x301);
+ reg32_write(0x3d402130,0x20300);
+ reg32_write(0x3d402134,0xa100002);
+ reg32_write(0x3d402138,0x31);
+ reg32_write(0x3d402144,0x220011);
+ reg32_write(0x3d402180,0xc0a70006);
+ reg32_write(0x3d402190,0x3858202);
+ reg32_write(0x3d402194,0x80303);
+ reg32_write(0x3d4021b4,0x502);
+ reg32_write(0x3d400244,0x0);
+ reg32_write(0x3d400250,0x29001505);
+ reg32_write(0x3d400254,0x2c);
+ reg32_write(0x3d40025c,0x5900575b);
+ reg32_write(0x3d400264,0x90000096);
+ reg32_write(0x3d40026c,0x1000012c);
+ reg32_write(0x3d400300,0x16);
+ reg32_write(0x3d400304,0x0);
+ reg32_write(0x3d40030c,0x0);
+ reg32_write(0x3d400320,0x1);
+ reg32_write(0x3d40036c,0x11);
+ reg32_write(0x3d400400,0x111);
+ reg32_write(0x3d400404,0x10f3);
+ reg32_write(0x3d400408,0x72ff);
+ reg32_write(0x3d400490,0x1);
+ reg32_write(0x3d400494,0xe00);
+ reg32_write(0x3d400498,0x62ffff);
+ reg32_write(0x3d40049c,0xe00);
+ reg32_write(0x3d4004a0,0xffff);
+ reg32_write(0x30391000,0x8f000004);
+ reg32_write(0x30391000,0x8f000000);
+ reg32_write(0x3d400030,0xa8);
+ do{
+ tmp=reg32_read(0x3d400004);
+ if(tmp&0x223) break;
+ }while(1);
+ reg32_write(0x3d400320,0x0);
+ reg32_write(0x3d000000,0x1);
+ reg32_write(0x3d4001b0,0x10);
+ reg32_write(0x3c040280,0x0);
+ reg32_write(0x3c040284,0x1);
+ reg32_write(0x3c040288,0x2);
+ reg32_write(0x3c04028c,0x3);
+ reg32_write(0x3c040290,0x4);
+ reg32_write(0x3c040294,0x5);
+ reg32_write(0x3c040298,0x6);
+ reg32_write(0x3c04029c,0x7);
+ reg32_write(0x3c044280,0x0);
+ reg32_write(0x3c044284,0x1);
+ reg32_write(0x3c044288,0x2);
+ reg32_write(0x3c04428c,0x3);
+ reg32_write(0x3c044290,0x4);
+ reg32_write(0x3c044294,0x5);
+ reg32_write(0x3c044298,0x6);
+ reg32_write(0x3c04429c,0x7);
+ reg32_write(0x3c048280,0x0);
+ reg32_write(0x3c048284,0x1);
+ reg32_write(0x3c048288,0x2);
+ reg32_write(0x3c04828c,0x3);
+ reg32_write(0x3c048290,0x4);
+ reg32_write(0x3c048294,0x5);
+ reg32_write(0x3c048298,0x6);
+ reg32_write(0x3c04829c,0x7);
+ reg32_write(0x3c04c280,0x0);
+ reg32_write(0x3c04c284,0x1);
+ reg32_write(0x3c04c288,0x2);
+ reg32_write(0x3c04c28c,0x3);
+ reg32_write(0x3c04c290,0x4);
+ reg32_write(0x3c04c294,0x5);
+ reg32_write(0x3c04c298,0x6);
+ reg32_write(0x3c04c29c,0x7);
+
+ /* Configure DDR PHY's registers */
+ ddr_cfg_phy();
+
+ reg32_write(DDRC_RFSHCTL3(0), 0x00000000);
+ reg32_write(DDRC_SWCTL(0), 0x0000);
+ /*
+ * ------------------- 9 -------------------
+ * Set DFIMISC.dfi_init_start to 1
+ * -----------------------------------------
+ */
+ reg32_write(DDRC_DFIMISC(0), 0x00000030);
+ reg32_write(DDRC_SWCTL(0), 0x0001);
+
+ /* wait DFISTAT.dfi_init_complete to 1 */
+ tmp_t = 0;
+ while(tmp_t==0){
+ tmp = reg32_read(DDRC_DFISTAT(0));
+ tmp_t = tmp & 0x01;
+ tmp = reg32_read(DDRC_MRSTAT(0));
+ }
+
+ reg32_write(DDRC_SWCTL(0), 0x0000);
+
+ /* clear DFIMISC.dfi_init_complete_en */
+ reg32_write(DDRC_DFIMISC(0), 0x00000010);
+ reg32_write(DDRC_DFIMISC(0), 0x00000011);
+ reg32_write(DDRC_PWRCTL(0), 0x00000088);
+
+ tmp = reg32_read(DDRC_CRCPARSTAT(0));
+ /*
+ * set SWCTL.sw_done to enable quasi-dynamic register
+ * programming outside reset.
+ */
+ reg32_write(DDRC_SWCTL(0), 0x00000001);
+
+ /* wait SWSTAT.sw_done_ack to 1 */
+ while((reg32_read(DDRC_SWSTAT(0)) & 0x1) == 0)
+ ;
+
+ /* wait STAT.operating_mode([1:0] for ddr3) to normal state */
+ while ((reg32_read(DDRC_STAT(0)) & 0x3) != 0x1)
+ ;
+
+ reg32_write(DDRC_PWRCTL(0), 0x00000088);
+ /* reg32_write(DDRC_PWRCTL(0), 0x018a); */
+ tmp = reg32_read(DDRC_CRCPARSTAT(0));
+
+ /* enable port 0 */
+ reg32_write(DDRC_PCTRL_0(0), 0x00000001);
+ /* enable DDR auto-refresh mode */
+ tmp = reg32_read(DDRC_RFSHCTL3(0)) & ~0x1;
+ reg32_write(DDRC_RFSHCTL3(0), tmp);
+}
diff --git a/arch/arm/boards/phytec-som-imx8m/ddrphy_train.c b/arch/arm/boards/phytec-som-imx8m/ddrphy_train.c
new file mode 100644
index 000000000..56af64782
--- /dev/null
+++ b/arch/arm/boards/phytec-som-imx8m/ddrphy_train.c
@@ -0,0 +1,947 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Generated code from MX8M_DDR_tool
+ * Align with uboot-imx_v2017.03_4.9.51_imx8m_ga
+ */
+
+#include "ddr.h"
+
+extern void wait_ddrphy_training_complete(void);
+void ddr_cfg_phy(void) {
+ unsigned int tmp, tmp_t;
+
+ //Init DDRPHY register...
+ reg32_write(0x3c080440,0x2);
+ reg32_write(0x3c080444,0x3);
+ reg32_write(0x3c080448,0x4);
+ reg32_write(0x3c08044c,0x5);
+ reg32_write(0x3c080450,0x0);
+ reg32_write(0x3c080454,0x1);
+ reg32_write(0x3c04017c,0x1ff);
+ reg32_write(0x3c04057c,0x1ff);
+ reg32_write(0x3c04417c,0x1ff);
+ reg32_write(0x3c04457c,0x1ff);
+ reg32_write(0x3c04817c,0x1ff);
+ reg32_write(0x3c04857c,0x1ff);
+ reg32_write(0x3c04c17c,0x1ff);
+ reg32_write(0x3c04c57c,0x1ff);
+ reg32_write(0x3c44017c,0x1ff);
+ reg32_write(0x3c44057c,0x1ff);
+ reg32_write(0x3c44417c,0x1ff);
+ reg32_write(0x3c44457c,0x1ff);
+ reg32_write(0x3c44817c,0x1ff);
+ reg32_write(0x3c44857c,0x1ff);
+ reg32_write(0x3c44c17c,0x1ff);
+ reg32_write(0x3c44c57c,0x1ff);
+ reg32_write(0x3c000154,0x1ff);
+ reg32_write(0x3c004154,0x1ff);
+ reg32_write(0x3c008154,0x1ff);
+ reg32_write(0x3c00c154,0x1ff);
+ reg32_write(0x3c010154,0x1ff);
+ reg32_write(0x3c014154,0x1ff);
+ reg32_write(0x3c018154,0x1ff);
+ reg32_write(0x3c01c154,0x1ff);
+ reg32_write(0x3c020154,0x1ff);
+ reg32_write(0x3c024154,0x1ff);
+ reg32_write(0x3c080314,0x19);
+ reg32_write(0x3c480314,0x7);
+ reg32_write(0x3c0800b8,0x2);
+ reg32_write(0x3c4800b8,0x1);
+ reg32_write(0x3c240810,0x0);
+ reg32_write(0x3c640810,0x0);
+ reg32_write(0x3c080090,0x1ab);
+ reg32_write(0x3c0800e8,0x0);
+ reg32_write(0x3c480090,0x1ab);
+ reg32_write(0x3c0800e8,0x0);
+ reg32_write(0x3c080158,0x3);
+ reg32_write(0x3c480158,0xa);
+ reg32_write(0x3c040134,0xe00);
+ reg32_write(0x3c040534,0xe00);
+ reg32_write(0x3c044134,0xe00);
+ reg32_write(0x3c044534,0xe00);
+ reg32_write(0x3c048134,0xe00);
+ reg32_write(0x3c048534,0xe00);
+ reg32_write(0x3c04c134,0xe00);
+ reg32_write(0x3c04c534,0xe00);
+ reg32_write(0x3c440134,0xe00);
+ reg32_write(0x3c440534,0xe00);
+ reg32_write(0x3c444134,0xe00);
+ reg32_write(0x3c444534,0xe00);
+ reg32_write(0x3c448134,0xe00);
+ reg32_write(0x3c448534,0xe00);
+ reg32_write(0x3c44c134,0xe00);
+ reg32_write(0x3c44c534,0xe00);
+ reg32_write(0x3c040124,0xfbe);
+ reg32_write(0x3c040524,0xfbe);
+ reg32_write(0x3c044124,0xfbe);
+ reg32_write(0x3c044524,0xfbe);
+ reg32_write(0x3c048124,0xfbe);
+ reg32_write(0x3c048524,0xfbe);
+ reg32_write(0x3c04c124,0xfbe);
+ reg32_write(0x3c04c524,0xfbe);
+ reg32_write(0x3c440124,0xfbe);
+ reg32_write(0x3c440524,0xfbe);
+ reg32_write(0x3c444124,0xfbe);
+ reg32_write(0x3c444524,0xfbe);
+ reg32_write(0x3c448124,0xfbe);
+ reg32_write(0x3c448524,0xfbe);
+ reg32_write(0x3c44c124,0xfbe);
+ reg32_write(0x3c44c524,0xfbe);
+ reg32_write(0x3c00010c,0x63);
+ reg32_write(0x3c00410c,0x63);
+ reg32_write(0x3c00810c,0x63);
+ reg32_write(0x3c00c10c,0x63);
+ reg32_write(0x3c01010c,0x63);
+ reg32_write(0x3c01410c,0x63);
+ reg32_write(0x3c01810c,0x63);
+ reg32_write(0x3c01c10c,0x63);
+ reg32_write(0x3c02010c,0x63);
+ reg32_write(0x3c02410c,0x63);
+ reg32_write(0x3c080060,0x3);
+ reg32_write(0x3c0801d4,0x4);
+ reg32_write(0x3c080140,0x0);
+ reg32_write(0x3c080020,0x320);
+ reg32_write(0x3c480020,0xa7);
+ reg32_write(0x3c080220,0x9);
+ reg32_write(0x3c0802c8,0xdc);
+ reg32_write(0x3c04010c,0x5a1);
+ reg32_write(0x3c04050c,0x5a1);
+ reg32_write(0x3c04410c,0x5a1);
+ reg32_write(0x3c04450c,0x5a1);
+ reg32_write(0x3c04810c,0x5a1);
+ reg32_write(0x3c04850c,0x5a1);
+ reg32_write(0x3c04c10c,0x5a1);
+ reg32_write(0x3c04c50c,0x5a1);
+ reg32_write(0x3c4802c8,0xdc);
+ reg32_write(0x3c44010c,0x5a1);
+ reg32_write(0x3c44050c,0x5a1);
+ reg32_write(0x3c44410c,0x5a1);
+ reg32_write(0x3c44450c,0x5a1);
+ reg32_write(0x3c44810c,0x5a1);
+ reg32_write(0x3c44850c,0x5a1);
+ reg32_write(0x3c44c10c,0x5a1);
+ reg32_write(0x3c44c50c,0x5a1);
+ reg32_write(0x3c0803e8,0x1);
+ reg32_write(0x3c4803e8,0x1);
+ reg32_write(0x3c080064,0x1);
+ reg32_write(0x3c480064,0x1);
+ reg32_write(0x3c0803c0,0x0);
+ reg32_write(0x3c0803c4,0x0);
+ reg32_write(0x3c0803c8,0x4444);
+ reg32_write(0x3c0803cc,0x8888);
+ reg32_write(0x3c0803d0,0x5555);
+ reg32_write(0x3c0803d4,0x0);
+ reg32_write(0x3c0803d8,0x0);
+ reg32_write(0x3c0803dc,0xf000);
+ reg32_write(0x3c080094,0x0);
+ reg32_write(0x3c0800b4,0x0);
+ reg32_write(0x3c4800b4,0x0);
+ reg32_write(0x3c08031c,0x80);
+ reg32_write(0x3c48031c,0x80);
+ reg32_write(0x3c080328,0x106);
+ reg32_write(0x3c480328,0x106);
+
+ //enable APB bus to access DDRPHY RAM
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0000, 0x0);
+ //load the 1D training image
+ ddr_load_train_code(FW_1D_IMAGE);
+
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54003,0xc80);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54004,0x2);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54005,0x1e28);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54006,0x11);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54008,0x131f);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54009,0xc8);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5400b,0x2);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5400d,0x100);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54012,0x110);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54019,0x2dd4);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5401a,0x31);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5401b,0x4a66);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5401c,0x4a08);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5401e,0x16);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5401f,0x2dd4);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54020,0x31);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54021,0x4a66);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54022,0x4a08);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54024,0x16);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5402b,0x1000);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5402c,0x1);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54032,0xd400);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54033,0x312d);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54034,0x6600);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54035,0x84a);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54036,0x4a);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54037,0x1600);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54038,0xd400);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54039,0x312d);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5403a,0x6600);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5403b,0x84a);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5403c,0x4a);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5403d,0x1600);
+
+ //disable APB bus to access DDRPHY RAM
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0000, 0x1);
+ //Reset MPU and run
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0099, 0x9);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0099, 0x1);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0099, 0x0);
+ wait_ddrphy_training_complete();
+
+ //configure DDRPHY-FW DMEM structure @clock1...
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0099, 0x1);
+
+ //set the PHY input clock to the desired frequency for pstate 1
+ reg32_write(0x3038a088,0x7070000);
+ reg32_write(0x3038a084,0x4030000);
+ reg32_write(0x303a00ec,0xffff);
+ tmp=reg32_read(0x303a00f8);
+ tmp |= 0x20;
+ reg32_write(0x303a00f8,tmp);
+ reg32_write(0x30360068,0xf5a406);
+ tmp=reg32_read(0x30360060);
+ tmp &= ~0x80;
+ reg32_write(0x30360060,tmp);
+ tmp=reg32_read(0x30360060);
+ tmp |= 0x200;
+ reg32_write(0x30360060,tmp);
+ tmp=reg32_read(0x30360060);
+ tmp &= ~0x20;
+ reg32_write(0x30360060,tmp);
+ tmp=reg32_read(0x30360060);
+ tmp &= ~0x10;
+ reg32_write(0x30360060,tmp);
+ do{
+ tmp=reg32_read(0x30360060);
+ if(tmp&0x80000000) break;
+ }while(1);
+ reg32_write(0x30389808,0x1000000);
+
+ //enable APB bus to access DDRPHY RAM
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0000, 0x0);
+ //load the 1D training image
+ ddr_load_train_code(FW_1D_IMAGE);
+
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54002,0x1);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54003,0x29c);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54004,0x2);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54005,0x1e28);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54006,0x11);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54008,0x121f);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54009,0xc8);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5400b,0x2);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5400d,0x100);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54012,0x110);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54019,0x994);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5401a,0x31);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5401b,0x4a66);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5401c,0x4a08);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5401e,0x16);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5401f,0x994);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54020,0x31);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54021,0x4a66);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54022,0x4a08);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54024,0x16);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5402b,0x1000);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5402c,0x1);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54032,0x9400);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54033,0x3109);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54034,0x6600);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54035,0x84a);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54036,0x4a);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54037,0x1600);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54038,0x9400);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54039,0x3109);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5403a,0x6600);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5403b,0x84a);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5403c,0x4a);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5403d,0x1600);
+
+ //disable APB bus to access DDRPHY RAM
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0000, 0x1);
+ //Reset MPU and run
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0099, 0x9);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0099, 0x1);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0099, 0x0);
+ wait_ddrphy_training_complete();
+
+ //set the PHY input clock to the desired frequency for pstate 0
+ reg32_write(0x3038a088,0x7070000);
+ reg32_write(0x3038a084,0x4030000);
+ reg32_write(0x303a00ec,0xffff);
+ tmp=reg32_read(0x303a00f8);
+ tmp |= 0x20;
+ reg32_write(0x303a00f8,tmp);
+ reg32_write(0x30360068,0xece580);
+ tmp=reg32_read(0x30360060);
+ tmp &= ~0x80;
+ reg32_write(0x30360060,tmp);
+ tmp=reg32_read(0x30360060);
+ tmp |= 0x200;
+ reg32_write(0x30360060,tmp);
+ tmp=reg32_read(0x30360060);
+ tmp &= ~0x20;
+ reg32_write(0x30360060,tmp);
+ tmp=reg32_read(0x30360060);
+ tmp &= ~0x10;
+ reg32_write(0x30360060,tmp);
+ do{
+ tmp=reg32_read(0x30360060);
+ if(tmp&0x80000000) break;
+ }while(1);
+ reg32_write(0x30389808,0x1000000);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0099, 0x1);
+
+
+ //enable APB bus to access DDRPHY RAM
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0000, 0x0);
+ //load the 2D training image
+ ddr_load_train_code(FW_2D_IMAGE);
+
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54003,0xc80);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54004,0x2);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54005,0x1e28);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54006,0x11);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54008,0x61);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54009,0xc8);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5400b,0x2);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5400f,0x100);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54010,0x1f7f);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54012,0x110);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54019,0x2dd4);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5401a,0x31);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5401b,0x4a66);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5401c,0x4a08);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5401e,0x16);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5401f,0x2dd4);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54020,0x31);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54021,0x4a66);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54022,0x4a08);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54024,0x16);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5402b,0x1000);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5402c,0x1);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54032,0xd400);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54033,0x312d);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54034,0x6600);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54035,0x84a);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54036,0x4a);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54037,0x1600);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54038,0xd400);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x54039,0x312d);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5403a,0x6600);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5403b,0x84a);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5403c,0x4a);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x5403d,0x1600);
+
+ //disable APB bus to access DDRPHY RAM
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0000, 0x1);
+ //Reset MPU and run
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0099, 0x9);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0099, 0x1);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0099, 0x0);
+ wait_ddrphy_training_complete();
+
+ //Halt MPU
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0099, 0x1);
+ //enable APB bus to access DDRPHY RAM
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0000, 0x0);
+
+ //Load firmware PIE image
+ reg32_write(0x3c240000,0x10);
+ reg32_write(0x3c240004,0x400);
+ reg32_write(0x3c240008,0x10e);
+ reg32_write(0x3c24000c,0x0);
+ reg32_write(0x3c240010,0x0);
+ reg32_write(0x3c240014,0x8);
+ reg32_write(0x3c2400a4,0xb);
+ reg32_write(0x3c2400a8,0x480);
+ reg32_write(0x3c2400ac,0x109);
+ reg32_write(0x3c2400b0,0x8);
+ reg32_write(0x3c2400b4,0x448);
+ reg32_write(0x3c2400b8,0x139);
+ reg32_write(0x3c2400bc,0x8);
+ reg32_write(0x3c2400c0,0x478);
+ reg32_write(0x3c2400c4,0x109);
+ reg32_write(0x3c2400c8,0x0);
+ reg32_write(0x3c2400cc,0xe8);
+ reg32_write(0x3c2400d0,0x109);
+ reg32_write(0x3c2400d4,0x2);
+ reg32_write(0x3c2400d8,0x10);
+ reg32_write(0x3c2400dc,0x139);
+ reg32_write(0x3c2400e0,0xf);
+ reg32_write(0x3c2400e4,0x7c0);
+ reg32_write(0x3c2400e8,0x139);
+ reg32_write(0x3c2400ec,0x44);
+ reg32_write(0x3c2400f0,0x630);
+ reg32_write(0x3c2400f4,0x159);
+ reg32_write(0x3c2400f8,0x14f);
+ reg32_write(0x3c2400fc,0x630);
+ reg32_write(0x3c240100,0x159);
+ reg32_write(0x3c240104,0x47);
+ reg32_write(0x3c240108,0x630);
+ reg32_write(0x3c24010c,0x149);
+ reg32_write(0x3c240110,0x4f);
+ reg32_write(0x3c240114,0x630);
+ reg32_write(0x3c240118,0x179);
+ reg32_write(0x3c24011c,0x8);
+ reg32_write(0x3c240120,0xe0);
+ reg32_write(0x3c240124,0x109);
+ reg32_write(0x3c240128,0x0);
+ reg32_write(0x3c24012c,0x7c8);
+ reg32_write(0x3c240130,0x109);
+ reg32_write(0x3c240134,0x0);
+ reg32_write(0x3c240138,0x1);
+ reg32_write(0x3c24013c,0x8);
+ reg32_write(0x3c240140,0x0);
+ reg32_write(0x3c240144,0x45a);
+ reg32_write(0x3c240148,0x9);
+ reg32_write(0x3c24014c,0x0);
+ reg32_write(0x3c240150,0x448);
+ reg32_write(0x3c240154,0x109);
+ reg32_write(0x3c240158,0x40);
+ reg32_write(0x3c24015c,0x630);
+ reg32_write(0x3c240160,0x179);
+ reg32_write(0x3c240164,0x1);
+ reg32_write(0x3c240168,0x618);
+ reg32_write(0x3c24016c,0x109);
+ reg32_write(0x3c240170,0x40c0);
+ reg32_write(0x3c240174,0x630);
+ reg32_write(0x3c240178,0x149);
+ reg32_write(0x3c24017c,0x8);
+ reg32_write(0x3c240180,0x4);
+ reg32_write(0x3c240184,0x48);
+ reg32_write(0x3c240188,0x4040);
+ reg32_write(0x3c24018c,0x630);
+ reg32_write(0x3c240190,0x149);
+ reg32_write(0x3c240194,0x0);
+ reg32_write(0x3c240198,0x4);
+ reg32_write(0x3c24019c,0x48);
+ reg32_write(0x3c2401a0,0x40);
+ reg32_write(0x3c2401a4,0x630);
+ reg32_write(0x3c2401a8,0x149);
+ reg32_write(0x3c2401ac,0x10);
+ reg32_write(0x3c2401b0,0x4);
+ reg32_write(0x3c2401b4,0x18);
+ reg32_write(0x3c2401b8,0x0);
+ reg32_write(0x3c2401bc,0x4);
+ reg32_write(0x3c2401c0,0x78);
+ reg32_write(0x3c2401c4,0x549);
+ reg32_write(0x3c2401c8,0x630);
+ reg32_write(0x3c2401cc,0x159);
+ reg32_write(0x3c2401d0,0xd49);
+ reg32_write(0x3c2401d4,0x630);
+ reg32_write(0x3c2401d8,0x159);
+ reg32_write(0x3c2401dc,0x94a);
+ reg32_write(0x3c2401e0,0x630);
+ reg32_write(0x3c2401e4,0x159);
+ reg32_write(0x3c2401e8,0x441);
+ reg32_write(0x3c2401ec,0x630);
+ reg32_write(0x3c2401f0,0x149);
+ reg32_write(0x3c2401f4,0x42);
+ reg32_write(0x3c2401f8,0x630);
+ reg32_write(0x3c2401fc,0x149);
+ reg32_write(0x3c240200,0x1);
+ reg32_write(0x3c240204,0x630);
+ reg32_write(0x3c240208,0x149);
+ reg32_write(0x3c24020c,0x0);
+ reg32_write(0x3c240210,0xe0);
+ reg32_write(0x3c240214,0x109);
+ reg32_write(0x3c240218,0xa);
+ reg32_write(0x3c24021c,0x10);
+ reg32_write(0x3c240220,0x109);
+ reg32_write(0x3c240224,0x9);
+ reg32_write(0x3c240228,0x3c0);
+ reg32_write(0x3c24022c,0x149);
+ reg32_write(0x3c240230,0x9);
+ reg32_write(0x3c240234,0x3c0);
+ reg32_write(0x3c240238,0x159);
+ reg32_write(0x3c24023c,0x18);
+ reg32_write(0x3c240240,0x10);
+ reg32_write(0x3c240244,0x109);
+ reg32_write(0x3c240248,0x0);
+ reg32_write(0x3c24024c,0x3c0);
+ reg32_write(0x3c240250,0x109);
+ reg32_write(0x3c240254,0x18);
+ reg32_write(0x3c240258,0x4);
+ reg32_write(0x3c24025c,0x48);
+ reg32_write(0x3c240260,0x18);
+ reg32_write(0x3c240264,0x4);
+ reg32_write(0x3c240268,0x58);
+ reg32_write(0x3c24026c,0xa);
+ reg32_write(0x3c240270,0x10);
+ reg32_write(0x3c240274,0x109);
+ reg32_write(0x3c240278,0x2);
+ reg32_write(0x3c24027c,0x10);
+ reg32_write(0x3c240280,0x109);
+ reg32_write(0x3c240284,0x5);
+ reg32_write(0x3c240288,0x7c0);
+ reg32_write(0x3c24028c,0x109);
+ reg32_write(0x3c240290,0x10);
+ reg32_write(0x3c240294,0x10);
+ reg32_write(0x3c240298,0x109);
+ reg32_write(0x3c100000,0x811);
+ reg32_write(0x3c100080,0x880);
+ reg32_write(0x3c100100,0x0);
+ reg32_write(0x3c100180,0x0);
+ reg32_write(0x3c100004,0x4008);
+ reg32_write(0x3c100084,0x83);
+ reg32_write(0x3c100104,0x4f);
+ reg32_write(0x3c100184,0x0);
+ reg32_write(0x3c100008,0x4040);
+ reg32_write(0x3c100088,0x83);
+ reg32_write(0x3c100108,0x51);
+ reg32_write(0x3c100188,0x0);
+ reg32_write(0x3c10000c,0x811);
+ reg32_write(0x3c10008c,0x880);
+ reg32_write(0x3c10010c,0x0);
+ reg32_write(0x3c10018c,0x0);
+ reg32_write(0x3c100010,0x720);
+ reg32_write(0x3c100090,0xf);
+ reg32_write(0x3c100110,0x1740);
+ reg32_write(0x3c100190,0x0);
+ reg32_write(0x3c100014,0x16);
+ reg32_write(0x3c100094,0x83);
+ reg32_write(0x3c100114,0x4b);
+ reg32_write(0x3c100194,0x0);
+ reg32_write(0x3c100018,0x716);
+ reg32_write(0x3c100098,0xf);
+ reg32_write(0x3c100118,0x2001);
+ reg32_write(0x3c100198,0x0);
+ reg32_write(0x3c10001c,0x716);
+ reg32_write(0x3c10009c,0xf);
+ reg32_write(0x3c10011c,0x2800);
+ reg32_write(0x3c10019c,0x0);
+ reg32_write(0x3c100020,0x716);
+ reg32_write(0x3c1000a0,0xf);
+ reg32_write(0x3c100120,0xf00);
+ reg32_write(0x3c1001a0,0x0);
+ reg32_write(0x3c100024,0x720);
+ reg32_write(0x3c1000a4,0xf);
+ reg32_write(0x3c100124,0x1400);
+ reg32_write(0x3c1001a4,0x0);
+ reg32_write(0x3c100028,0xe08);
+ reg32_write(0x3c1000a8,0xc15);
+ reg32_write(0x3c100128,0x0);
+ reg32_write(0x3c1001a8,0x0);
+ reg32_write(0x3c10002c,0x623);
+ reg32_write(0x3c1000ac,0x15);
+ reg32_write(0x3c10012c,0x0);
+ reg32_write(0x3c1001ac,0x0);
+ reg32_write(0x3c100030,0x4028);
+ reg32_write(0x3c1000b0,0x80);
+ reg32_write(0x3c100130,0x0);
+ reg32_write(0x3c1001b0,0x0);
+ reg32_write(0x3c100034,0xe08);
+ reg32_write(0x3c1000b4,0xc1a);
+ reg32_write(0x3c100134,0x0);
+ reg32_write(0x3c1001b4,0x0);
+ reg32_write(0x3c100038,0x623);
+ reg32_write(0x3c1000b8,0x1a);
+ reg32_write(0x3c100138,0x0);
+ reg32_write(0x3c1001b8,0x0);
+ reg32_write(0x3c10003c,0x4040);
+ reg32_write(0x3c1000bc,0x80);
+ reg32_write(0x3c10013c,0x0);
+ reg32_write(0x3c1001bc,0x0);
+ reg32_write(0x3c100040,0x2604);
+ reg32_write(0x3c1000c0,0x15);
+ reg32_write(0x3c100140,0x0);
+ reg32_write(0x3c1001c0,0x0);
+ reg32_write(0x3c100044,0x708);
+ reg32_write(0x3c1000c4,0x5);
+ reg32_write(0x3c100144,0x0);
+ reg32_write(0x3c1001c4,0x2002);
+ reg32_write(0x3c100048,0x8);
+ reg32_write(0x3c1000c8,0x80);
+ reg32_write(0x3c100148,0x0);
+ reg32_write(0x3c1001c8,0x0);
+ reg32_write(0x3c10004c,0x2604);
+ reg32_write(0x3c1000cc,0x1a);
+ reg32_write(0x3c10014c,0x0);
+ reg32_write(0x3c1001cc,0x0);
+ reg32_write(0x3c100050,0x708);
+ reg32_write(0x3c1000d0,0xa);
+ reg32_write(0x3c100150,0x0);
+ reg32_write(0x3c1001d0,0x2002);
+ reg32_write(0x3c100054,0x4040);
+ reg32_write(0x3c1000d4,0x80);
+ reg32_write(0x3c100154,0x0);
+ reg32_write(0x3c1001d4,0x0);
+ reg32_write(0x3c100058,0x60a);
+ reg32_write(0x3c1000d8,0x15);
+ reg32_write(0x3c100158,0x1200);
+ reg32_write(0x3c1001d8,0x0);
+ reg32_write(0x3c10005c,0x61a);
+ reg32_write(0x3c1000dc,0x15);
+ reg32_write(0x3c10015c,0x1300);
+ reg32_write(0x3c1001dc,0x0);
+ reg32_write(0x3c100060,0x60a);
+ reg32_write(0x3c1000e0,0x1a);
+ reg32_write(0x3c100160,0x1200);
+ reg32_write(0x3c1001e0,0x0);
+ reg32_write(0x3c100064,0x642);
+ reg32_write(0x3c1000e4,0x1a);
+ reg32_write(0x3c100164,0x1300);
+ reg32_write(0x3c1001e4,0x0);
+ reg32_write(0x3c100068,0x4808);
+ reg32_write(0x3c1000e8,0x880);
+ reg32_write(0x3c100168,0x0);
+ reg32_write(0x3c1001e8,0x0);
+ reg32_write(0x3c24029c,0x0);
+ reg32_write(0x3c2402a0,0x790);
+ reg32_write(0x3c2402a4,0x11a);
+ reg32_write(0x3c2402a8,0x8);
+ reg32_write(0x3c2402ac,0x7aa);
+ reg32_write(0x3c2402b0,0x2a);
+ reg32_write(0x3c2402b4,0x10);
+ reg32_write(0x3c2402b8,0x7b2);
+ reg32_write(0x3c2402bc,0x2a);
+ reg32_write(0x3c2402c0,0x0);
+ reg32_write(0x3c2402c4,0x7c8);
+ reg32_write(0x3c2402c8,0x109);
+ reg32_write(0x3c2402cc,0x10);
+ reg32_write(0x3c2402d0,0x2a8);
+ reg32_write(0x3c2402d4,0x129);
+ reg32_write(0x3c2402d8,0x8);
+ reg32_write(0x3c2402dc,0x370);
+ reg32_write(0x3c2402e0,0x129);
+ reg32_write(0x3c2402e4,0xa);
+ reg32_write(0x3c2402e8,0x3c8);
+ reg32_write(0x3c2402ec,0x1a9);
+ reg32_write(0x3c2402f0,0xc);
+ reg32_write(0x3c2402f4,0x408);
+ reg32_write(0x3c2402f8,0x199);
+ reg32_write(0x3c2402fc,0x14);
+ reg32_write(0x3c240300,0x790);
+ reg32_write(0x3c240304,0x11a);
+ reg32_write(0x3c240308,0x8);
+ reg32_write(0x3c24030c,0x4);
+ reg32_write(0x3c240310,0x18);
+ reg32_write(0x3c240314,0xe);
+ reg32_write(0x3c240318,0x408);
+ reg32_write(0x3c24031c,0x199);
+ reg32_write(0x3c240320,0x8);
+ reg32_write(0x3c240324,0x8568);
+ reg32_write(0x3c240328,0x108);
+ reg32_write(0x3c24032c,0x18);
+ reg32_write(0x3c240330,0x790);
+ reg32_write(0x3c240334,0x16a);
+ reg32_write(0x3c240338,0x8);
+ reg32_write(0x3c24033c,0x1d8);
+ reg32_write(0x3c240340,0x169);
+ reg32_write(0x3c240344,0x10);
+ reg32_write(0x3c240348,0x8558);
+ reg32_write(0x3c24034c,0x168);
+ reg32_write(0x3c240350,0x70);
+ reg32_write(0x3c240354,0x788);
+ reg32_write(0x3c240358,0x16a);
+ reg32_write(0x3c24035c,0x1ff8);
+ reg32_write(0x3c240360,0x85a8);
+ reg32_write(0x3c240364,0x1e8);
+ reg32_write(0x3c240368,0x50);
+ reg32_write(0x3c24036c,0x798);
+ reg32_write(0x3c240370,0x16a);
+ reg32_write(0x3c240374,0x60);
+ reg32_write(0x3c240378,0x7a0);
+ reg32_write(0x3c24037c,0x16a);
+ reg32_write(0x3c240380,0x8);
+ reg32_write(0x3c240384,0x8310);
+ reg32_write(0x3c240388,0x168);
+ reg32_write(0x3c24038c,0x8);
+ reg32_write(0x3c240390,0xa310);
+ reg32_write(0x3c240394,0x168);
+ reg32_write(0x3c240398,0xa);
+ reg32_write(0x3c24039c,0x408);
+ reg32_write(0x3c2403a0,0x169);
+ reg32_write(0x3c2403a4,0x6e);
+ reg32_write(0x3c2403a8,0x0);
+ reg32_write(0x3c2403ac,0x68);
+ reg32_write(0x3c2403b0,0x0);
+ reg32_write(0x3c2403b4,0x408);
+ reg32_write(0x3c2403b8,0x169);
+ reg32_write(0x3c2403bc,0x0);
+ reg32_write(0x3c2403c0,0x8310);
+ reg32_write(0x3c2403c4,0x168);
+ reg32_write(0x3c2403c8,0x0);
+ reg32_write(0x3c2403cc,0xa310);
+ reg32_write(0x3c2403d0,0x168);
+ reg32_write(0x3c2403d4,0x1ff8);
+ reg32_write(0x3c2403d8,0x85a8);
+ reg32_write(0x3c2403dc,0x1e8);
+ reg32_write(0x3c2403e0,0x68);
+ reg32_write(0x3c2403e4,0x798);
+ reg32_write(0x3c2403e8,0x16a);
+ reg32_write(0x3c2403ec,0x78);
+ reg32_write(0x3c2403f0,0x7a0);
+ reg32_write(0x3c2403f4,0x16a);
+ reg32_write(0x3c2403f8,0x68);
+ reg32_write(0x3c2403fc,0x790);
+ reg32_write(0x3c240400,0x16a);
+ reg32_write(0x3c240404,0x8);
+ reg32_write(0x3c240408,0x8b10);
+ reg32_write(0x3c24040c,0x168);
+ reg32_write(0x3c240410,0x8);
+ reg32_write(0x3c240414,0xab10);
+ reg32_write(0x3c240418,0x168);
+ reg32_write(0x3c24041c,0xa);
+ reg32_write(0x3c240420,0x408);
+ reg32_write(0x3c240424,0x169);
+ reg32_write(0x3c240428,0x58);
+ reg32_write(0x3c24042c,0x0);
+ reg32_write(0x3c240430,0x68);
+ reg32_write(0x3c240434,0x0);
+ reg32_write(0x3c240438,0x408);
+ reg32_write(0x3c24043c,0x169);
+ reg32_write(0x3c240440,0x0);
+ reg32_write(0x3c240444,0x8b10);
+ reg32_write(0x3c240448,0x168);
+ reg32_write(0x3c24044c,0x0);
+ reg32_write(0x3c240450,0xab10);
+ reg32_write(0x3c240454,0x168);
+ reg32_write(0x3c240458,0x0);
+ reg32_write(0x3c24045c,0x1d8);
+ reg32_write(0x3c240460,0x169);
+ reg32_write(0x3c240464,0x80);
+ reg32_write(0x3c240468,0x790);
+ reg32_write(0x3c24046c,0x16a);
+ reg32_write(0x3c240470,0x18);
+ reg32_write(0x3c240474,0x7aa);
+ reg32_write(0x3c240478,0x6a);
+ reg32_write(0x3c24047c,0xa);
+ reg32_write(0x3c240480,0x0);
+ reg32_write(0x3c240484,0x1e9);
+ reg32_write(0x3c240488,0x8);
+ reg32_write(0x3c24048c,0x8080);
+ reg32_write(0x3c240490,0x108);
+ reg32_write(0x3c240494,0xf);
+ reg32_write(0x3c240498,0x408);
+ reg32_write(0x3c24049c,0x169);
+ reg32_write(0x3c2404a0,0xc);
+ reg32_write(0x3c2404a4,0x0);
+ reg32_write(0x3c2404a8,0x68);
+ reg32_write(0x3c2404ac,0x9);
+ reg32_write(0x3c2404b0,0x0);
+ reg32_write(0x3c2404b4,0x1a9);
+ reg32_write(0x3c2404b8,0x0);
+ reg32_write(0x3c2404bc,0x408);
+ reg32_write(0x3c2404c0,0x169);
+ reg32_write(0x3c2404c4,0x0);
+ reg32_write(0x3c2404c8,0x8080);
+ reg32_write(0x3c2404cc,0x108);
+ reg32_write(0x3c2404d0,0x8);
+ reg32_write(0x3c2404d4,0x7aa);
+ reg32_write(0x3c2404d8,0x6a);
+ reg32_write(0x3c2404dc,0x0);
+ reg32_write(0x3c2404e0,0x8568);
+ reg32_write(0x3c2404e4,0x108);
+ reg32_write(0x3c2404e8,0xb7);
+ reg32_write(0x3c2404ec,0x790);
+ reg32_write(0x3c2404f0,0x16a);
+ reg32_write(0x3c2404f4,0x1f);
+ reg32_write(0x3c2404f8,0x0);
+ reg32_write(0x3c2404fc,0x68);
+ reg32_write(0x3c240500,0x8);
+ reg32_write(0x3c240504,0x8558);
+ reg32_write(0x3c240508,0x168);
+ reg32_write(0x3c24050c,0xf);
+ reg32_write(0x3c240510,0x408);
+ reg32_write(0x3c240514,0x169);
+ reg32_write(0x3c240518,0xc);
+ reg32_write(0x3c24051c,0x0);
+ reg32_write(0x3c240520,0x68);
+ reg32_write(0x3c240524,0x0);
+ reg32_write(0x3c240528,0x408);
+ reg32_write(0x3c24052c,0x169);
+ reg32_write(0x3c240530,0x0);
+ reg32_write(0x3c240534,0x8558);
+ reg32_write(0x3c240538,0x168);
+ reg32_write(0x3c24053c,0x8);
+ reg32_write(0x3c240540,0x3c8);
+ reg32_write(0x3c240544,0x1a9);
+ reg32_write(0x3c240548,0x3);
+ reg32_write(0x3c24054c,0x370);
+ reg32_write(0x3c240550,0x129);
+ reg32_write(0x3c240554,0x20);
+ reg32_write(0x3c240558,0x2aa);
+ reg32_write(0x3c24055c,0x9);
+ reg32_write(0x3c240560,0x0);
+ reg32_write(0x3c240564,0x400);
+ reg32_write(0x3c240568,0x10e);
+ reg32_write(0x3c24056c,0x8);
+ reg32_write(0x3c240570,0xe8);
+ reg32_write(0x3c240574,0x109);
+ reg32_write(0x3c240578,0x0);
+ reg32_write(0x3c24057c,0x8140);
+ reg32_write(0x3c240580,0x10c);
+ reg32_write(0x3c240584,0x10);
+ reg32_write(0x3c240588,0x8138);
+ reg32_write(0x3c24058c,0x10c);
+ reg32_write(0x3c240590,0x8);
+ reg32_write(0x3c240594,0x7c8);
+ reg32_write(0x3c240598,0x101);
+ reg32_write(0x3c24059c,0x8);
+ reg32_write(0x3c2405a0,0x0);
+ reg32_write(0x3c2405a4,0x8);
+ reg32_write(0x3c2405a8,0x8);
+ reg32_write(0x3c2405ac,0x448);
+ reg32_write(0x3c2405b0,0x109);
+ reg32_write(0x3c2405b4,0xf);
+ reg32_write(0x3c2405b8,0x7c0);
+ reg32_write(0x3c2405bc,0x109);
+ reg32_write(0x3c2405c0,0x0);
+ reg32_write(0x3c2405c4,0xe8);
+ reg32_write(0x3c2405c8,0x109);
+ reg32_write(0x3c2405cc,0x47);
+ reg32_write(0x3c2405d0,0x630);
+ reg32_write(0x3c2405d4,0x109);
+ reg32_write(0x3c2405d8,0x8);
+ reg32_write(0x3c2405dc,0x618);
+ reg32_write(0x3c2405e0,0x109);
+ reg32_write(0x3c2405e4,0x8);
+ reg32_write(0x3c2405e8,0xe0);
+ reg32_write(0x3c2405ec,0x109);
+ reg32_write(0x3c2405f0,0x0);
+ reg32_write(0x3c2405f4,0x7c8);
+ reg32_write(0x3c2405f8,0x109);
+ reg32_write(0x3c2405fc,0x8);
+ reg32_write(0x3c240600,0x8140);
+ reg32_write(0x3c240604,0x10c);
+ reg32_write(0x3c240608,0x0);
+ reg32_write(0x3c24060c,0x1);
+ reg32_write(0x3c240610,0x8);
+ reg32_write(0x3c240614,0x8);
+ reg32_write(0x3c240618,0x4);
+ reg32_write(0x3c24061c,0x8);
+ reg32_write(0x3c240620,0x8);
+ reg32_write(0x3c240624,0x7c8);
+ reg32_write(0x3c240628,0x101);
+ reg32_write(0x3c240018,0x0);
+ reg32_write(0x3c24001c,0x0);
+ reg32_write(0x3c240020,0x8);
+ reg32_write(0x3c240024,0x0);
+ reg32_write(0x3c240028,0x0);
+ reg32_write(0x3c24002c,0x0);
+ reg32_write(0x3c34039c,0x400);
+ reg32_write(0x3c24005c,0x0);
+ reg32_write(0x3c24007c,0x2a);
+ reg32_write(0x3c240098,0x6a);
+ reg32_write(0x3c100340,0x0);
+ reg32_write(0x3c100344,0x101);
+ reg32_write(0x3c100348,0x105);
+ reg32_write(0x3c10034c,0x107);
+ reg32_write(0x3c100350,0x10f);
+ reg32_write(0x3c100354,0x202);
+ reg32_write(0x3c100358,0x20a);
+ reg32_write(0x3c10035c,0x20b);
+ reg32_write(0x3c0800e8,0x2);
+ reg32_write(0x3c08002c,0x64);
+ reg32_write(0x3c080030,0xc8);
+ reg32_write(0x3c080034,0x7d0);
+ reg32_write(0x3c080038,0x2c);
+ reg32_write(0x3c48002c,0x14);
+ reg32_write(0x3c480030,0x29);
+ reg32_write(0x3c480034,0x1a1);
+ reg32_write(0x3c480038,0x10);
+ reg32_write(0x3c240030,0x0);
+ reg32_write(0x3c240034,0x173);
+ reg32_write(0x3c240038,0x60);
+ reg32_write(0x3c24003c,0x6110);
+ reg32_write(0x3c240040,0x2152);
+ reg32_write(0x3c240044,0xdfbd);
+ reg32_write(0x3c240048,0x60);
+ reg32_write(0x3c24004c,0x6152);
+ reg32_write(0x3c080040,0x5a);
+ reg32_write(0x3c080044,0x3);
+ reg32_write(0x3c480040,0x5a);
+ reg32_write(0x3c480044,0x3);
+ reg32_write(0x3c100200,0xe0);
+ reg32_write(0x3c100204,0x12);
+ reg32_write(0x3c100208,0xe0);
+ reg32_write(0x3c10020c,0x12);
+ reg32_write(0x3c100210,0xe0);
+ reg32_write(0x3c100214,0x12);
+ reg32_write(0x3c500200,0xe0);
+ reg32_write(0x3c500204,0x12);
+ reg32_write(0x3c500208,0xe0);
+ reg32_write(0x3c50020c,0x12);
+ reg32_write(0x3c500210,0xe0);
+ reg32_write(0x3c500214,0x12);
+ reg32_write(0x3c1003f4,0xf);
+ reg32_write(0x3c040044,0x1);
+ reg32_write(0x3c040048,0x1);
+ reg32_write(0x3c04004c,0x180);
+ reg32_write(0x3c040060,0x1);
+ reg32_write(0x3c040008,0x6209);
+ reg32_write(0x3c0402c8,0x1);
+ reg32_write(0x3c0406d0,0x1);
+ reg32_write(0x3c040ad0,0x1);
+ reg32_write(0x3c040ed0,0x1);
+ reg32_write(0x3c0412d0,0x1);
+ reg32_write(0x3c0416d0,0x1);
+ reg32_write(0x3c041ad0,0x1);
+ reg32_write(0x3c041ed0,0x1);
+ reg32_write(0x3c0422d0,0x1);
+ reg32_write(0x3c044044,0x1);
+ reg32_write(0x3c044048,0x1);
+ reg32_write(0x3c04404c,0x180);
+ reg32_write(0x3c044060,0x1);
+ reg32_write(0x3c044008,0x6209);
+ reg32_write(0x3c0442c8,0x1);
+ reg32_write(0x3c0446d0,0x1);
+ reg32_write(0x3c044ad0,0x1);
+ reg32_write(0x3c044ed0,0x1);
+ reg32_write(0x3c0452d0,0x1);
+ reg32_write(0x3c0456d0,0x1);
+ reg32_write(0x3c045ad0,0x1);
+ reg32_write(0x3c045ed0,0x1);
+ reg32_write(0x3c0462d0,0x1);
+ reg32_write(0x3c048044,0x1);
+ reg32_write(0x3c048048,0x1);
+ reg32_write(0x3c04804c,0x180);
+ reg32_write(0x3c048060,0x1);
+ reg32_write(0x3c048008,0x6209);
+ reg32_write(0x3c0482c8,0x1);
+ reg32_write(0x3c0486d0,0x1);
+ reg32_write(0x3c048ad0,0x1);
+ reg32_write(0x3c048ed0,0x1);
+ reg32_write(0x3c0492d0,0x1);
+ reg32_write(0x3c0496d0,0x1);
+ reg32_write(0x3c049ad0,0x1);
+ reg32_write(0x3c049ed0,0x1);
+ reg32_write(0x3c04a2d0,0x1);
+ reg32_write(0x3c04c044,0x1);
+ reg32_write(0x3c04c048,0x1);
+ reg32_write(0x3c04c04c,0x180);
+ reg32_write(0x3c04c060,0x1);
+ reg32_write(0x3c04c008,0x6209);
+ reg32_write(0x3c04c2c8,0x1);
+ reg32_write(0x3c04c6d0,0x1);
+ reg32_write(0x3c04cad0,0x1);
+ reg32_write(0x3c04ced0,0x1);
+ reg32_write(0x3c04d2d0,0x1);
+ reg32_write(0x3c04d6d0,0x1);
+ reg32_write(0x3c04dad0,0x1);
+ reg32_write(0x3c04ded0,0x1);
+ reg32_write(0x3c04e2d0,0x1);
+ reg32_write(0x3c0800e8,0x2);
+ reg32_write(0x3c300200,0x2);
+ //customer Post Train
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x00020010, 0x0000006a);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x0002001d, 0x00000001);
+ /*
+ * CalBusy.0 =1, indicates the calibrator is actively calibrating.
+ * Wait Calibrating done.
+ */
+ tmp_t = 1;
+ while(tmp_t) {
+ tmp = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x20097);
+ tmp_t = tmp & 0x01;
+ }
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0000, 0x0);
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0x2006e, 0x0);
+ //disable APB bus to access DDRPHY RAM
+ reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0000, 0x1);
+}
--git a/arch/arm/boards/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg b/arch/arm/boards/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg
new file mode 100644
index 000000000..aff8321b9
--- /dev/null
+++ b/arch/arm/boards/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg
@@ -0,0 +1,5 @@
+soc imx8mq
+
+loadaddr 0x007E1000
+max_load_size 0x3F000
+dcdofs 0x400
diff --git a/arch/arm/boards/phytec-som-imx8m/lowlevel.c b/arch/arm/boards/phytec-som-imx8m/lowlevel.c
new file mode 100644
index 000000000..4a1054a5e
--- /dev/null
+++ b/arch/arm/boards/phytec-som-imx8m/lowlevel.c
@@ -0,0 +1,127 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <common.h>
+#include <linux/sizes.h>
+#include <mach/generic.h>
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+#include <mach/imx8-ccm-regs.h>
+#include <mach/iomux-mx8.h>
+#include <mach/imx8-ddrc.h>
+#include <mach/xload.h>
+#include <io.h>
+#include <debug_ll.h>
+#include <asm/cache.h>
+#include <asm/sections.h>
+#include <asm/mmu.h>
+#include <mach/atf.h>
+#include <mach/esdctl.h>
+
+#include "ddr.h"
+
+extern char __dtb_imx8mq_phytec_phycore_som_start[];
+
+#define UART_PAD_CTRL MUX_PAD_CTRL(PAD_CTL_DSE_3P3V_45_OHM)
+
+static void setup_uart(void)
+{
+ void __iomem *iomux = IOMEM(MX8MQ_IOMUXC_BASE_ADDR);
+ void __iomem *ccm = IOMEM(MX8MQ_CCM_BASE_ADDR);
+
+ writel(CCM_CCGR_SETTINGn_NEEDED(0),
+ ccm + CCM_CCGRn_CLR(CCM_CCGR_UART1));
+ writel(CCM_TARGET_ROOTn_ENABLE | UART1_CLK_ROOT__25M_REF_CLK,
+ ccm + CCM_TARGET_ROOTn(UART1_CLK_ROOT));
+ writel(CCM_CCGR_SETTINGn_NEEDED(0),
+ ccm + CCM_CCGRn_SET(CCM_CCGR_UART1));
+
+ imx_setup_pad(iomux, IMX8MQ_PAD_UART1_TXD__UART1_TX | UART_PAD_CTRL);
+
+ imx8_uart_setup_ll();
+
+ putc_ll('>');
+}
+
+static void phytec_imx8mq_som_sram_setup(void)
+{
+ enum bootsource src = BOOTSOURCE_UNKNOWN;
+ int instance = BOOTSOURCE_INSTANCE_UNKNOWN;
+ int ret = -ENOTSUPP;
+
+ ddr_init();
+
+ imx8_get_boot_source(&src, &instance);
+
+ if (src == BOOTSOURCE_MMC)
+ ret = imx8_esdhc_start_image(instance);
+
+ BUG_ON(ret);
+}
+
+/*
+ * Power-on execution flow of start_phytec_phycore_imx8mq() might not be
+ * obvious for a very first read, so here's, hopefully helpful,
+ * summary:
+ *
+ * 1. MaskROM uploads PBL into OCRAM and that's where this function is
+ * executed for the first time
+ *
+ * 2. DDR is initialized and full i.MX image is loaded to the
+ * beginning of RAM
+ *
+ * 3. start_phytec_phycore_imx8mq, now in RAM, is executed again
+ *
+ * 4. BL31 blob is uploaded to OCRAM and the control is transfer to it
+ *
+ * 5. BL31 exits EL3 into EL2 at address MX8MQ_ATF_BL33_BASE_ADDR,
+ * executing start_phytec_phycore_imx8mq() the third time
+ *
+ * 6. Standard barebox boot flow continues
+ */
+ENTRY_FUNCTION(start_phytec_phycore_imx8mq, r0, r1, r2)
+{
+ arm_cpu_lowlevel_init();
+
+ if (IS_ENABLED(CONFIG_DEBUG_LL))
+ setup_uart();
+
+ if (get_pc() < MX8MQ_DDR_CSD1_BASE_ADDR) {
+ /*
+ * We assume that we were just loaded by MaskROM into
+ * SRAM if we are not running from DDR. We also assume
+ * that means DDR needs to be initialized for the
+ * first time.
+ */
+ phytec_imx8mq_som_sram_setup();
+ }
+ /*
+ * Straight from the power-on we are at EL3, so the following
+ * code _will_ load and jump to ATF.
+ *
+ * However when we are re-executed upon exit from ATF's
+ * initialization routine, it is EL2 which means we'll skip
+ * loadting ATF blob again
+ */
+ if (current_el() == 3) {
+ const u8 *bl31;
+ size_t bl31_size;
+
+ get_builtin_firmware(imx_imx8m_bl31_bin, &bl31, &bl31_size);
+ imx8mq_atf_load_bl31(bl31, bl31_size);
+ }
+
+ /*
+ * Standard entry we hit once we initialized both DDR and ATF
+ */
+ imx8mq_barebox_entry(__dtb_imx8mq_phytec_phycore_som_start);
+}
+
diff --git a/arch/arm/configs/imx_v8_defconfig b/arch/arm/configs/imx_v8_defconfig
index cc41f4975..da0623181 100644
--- a/arch/arm/configs/imx_v8_defconfig
+++ b/arch/arm/configs/imx_v8_defconfig
@@ -1,6 +1,7 @@
CONFIG_ARCH_IMX=y
CONFIG_IMX_MULTI_BOARDS=y
CONFIG_MACH_NXP_IMX8MQ_EVK=y
+CONFIG_MACH_PHYTEC_SOM_IMX8M=y
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
CONFIG_MMU=y
CONFIG_MALLOC_SIZE=0x0
@@ -80,6 +81,7 @@ CONFIG_NET_RESOLV=y
CONFIG_OFDEVICE=y
CONFIG_OF_BAREBOX_DRIVERS=y
CONFIG_DRIVER_NET_FEC_IMX=y
+CONFIG_DP83867_PHY=y
CONFIG_DRIVER_SPI_IMX=y
CONFIG_I2C=y
CONFIG_I2C_IMX=y
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index caa97e713..dddce21c0 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -67,6 +67,7 @@ pbl-dtb-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += imx6q-phytec-pbaa03.dtb.o \
imx6ull-phytec-phycore-som-lc.dtb.o \
imx6ull-phytec-phycore-som.dtb.o
pbl-dtb-$(CONFIG_MACH_PHYTEC_PHYCORE_IMX7) += imx7d-phyboard-zeta.dtb.o
+pbl-dtb-$(CONFIG_MACH_PHYTEC_SOM_IMX8M) += imx8mq-phytec-phycore-som.dtb.o
pbl-dtb-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3) += armada-xp-openblocks-ax3-4-bb.dtb.o
pbl-dtb-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += kirkwood-openblocks_a6-bb.dtb.o
pbl-dtb-$(CONFIG_MACH_RADXA_ROCK) += rk3188-radxarock.dtb.o
diff --git a/arch/arm/dts/imx8mq-phytec-phycore-som.dts b/arch/arm/dts/imx8mq-phytec-phycore-som.dts
new file mode 100644
index 000000000..7b566e32b
--- /dev/null
+++ b/arch/arm/dts/imx8mq-phytec-phycore-som.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2018 Christian Hemp <christian.hemp@posteo.de>
+ */
+
+/dts-v1/;
+
+#include <arm64/freescale/imx8mq.dtsi>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx8mq.dtsi"
+#include "imx8mq-ddrc.dtsi"
+
+/ {
+ model = "Phytec phyCORE-i.MX8";
+ compatible = "phytec,imx8mq-pcl066", "fsl,imx8mq";
+
+ chosen {
+ stdout-path = &uart1;
+
+ environment-emmc {
+ compatible = "barebox,environment";
+ device-path = &usdhc1, "partname:barebox-environment";
+ status = "disabled";
+ };
+
+ environment-sd {
+ compatible = "barebox,environment";
+ device-path = &usdhc2, "partname:barebox-environment";
+ status = "disabled";
+ };
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ enet-phy-lane-no-swap;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic@8 {
+ compatible = "fsl,pfuze100";
+ reg = <0x8>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3ab {
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <975000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1675000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1625000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3625000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+};
+
+&ocotp {
+ barebox,provide-mac-address = <&fec1 0x640>;
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ vqmmc-supply = <&sw4_reg>;
+ bus-width = <8>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0xe0000>;
+ };
+
+ partition@e0000 {
+ label = "barebox-environment";
+ reg = <0xe0000 0x20000>;
+ };
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0xe0000>;
+ };
+
+ partition@e0000 {
+ label = "barebox-environment";
+ reg = <0xe0000 0x20000>;
+ };
+};
+
+&iomuxc {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23
+ MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19
+ >;
+ };
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
+ MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49
+ MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3
+ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc5
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc5
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc5
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc5
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc5
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc5
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc5
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc5
+ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x85
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc7
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc7
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc7
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc7
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc7
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc7
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc7
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc7
+ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x87
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
+ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5
+ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7
+ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
+ >;
+ };
+};
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 44ca27096..0fc36b5f5 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -470,6 +470,13 @@ config MACH_NXP_IMX8MQ_EVK
select FIRMWARE_IMX8MQ_ATF
select ARM_SMCCC
+config MACH_PHYTEC_SOM_IMX8M
+ bool "Phytec i.MX8M SOM"
+ select ARCH_IMX8MQ
+ select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
+ select FIRMWARE_IMX8MQ_ATF
+ select ARM_SMCCC
+
config MACH_GRINN_LITEBOARD
bool "Grinn liteboard"
select ARCH_IMX6UL
diff --git a/images/Makefile.imx b/images/Makefile.imx
index 3d2e352a3..3d675d0e8 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
@@ -549,3 +549,8 @@ pblb-$(CONFIG_MACH_NXP_IMX8MQ_EVK) += start_nxp_imx8mq_evk
CFG_start_nxp_imx8mq_evk.pblb.imximg = $(board)/nxp-imx8mq-evk/flash-header-imx8mq-evk.imxcfg
FILE_barebox-nxp-imx8mq-evk.img = start_nxp_imx8mq_evk.pblb.imximg
image-$(CONFIG_MACH_NXP_IMX8MQ_EVK) += barebox-nxp-imx8mq-evk.img
+
+pblb-$(CONFIG_MACH_PHYTEC_SOM_IMX8M) += start_phytec_phycore_imx8mq
+CFG_start_phytec_phycore_imx8mq.pblb.imximg = $(board)/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg
+FILE_barebox-phytec-phycore-imx8mq.img = start_phytec_phycore_imx8mq.pblb.imximg
+image-$(CONFIG_MACH_PHYTEC_SOM_IMX8M) += barebox-phytec-phycore-imx8mq.img
--
2.17.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] ARM: phyCORE-i.MX8M SOM support
2019-02-06 18:41 [PATCH] ARM: phyCORE-i.MX8M SOM support Christian Hemp
@ 2019-02-07 1:20 ` Andrey Smirnov
2019-02-11 8:20 ` Sascha Hauer
2019-02-11 11:00 ` Lucas Stach
2 siblings, 0 replies; 6+ messages in thread
From: Andrey Smirnov @ 2019-02-07 1:20 UTC (permalink / raw)
To: Christian Hemp; +Cc: Barebox List
On Wed, Feb 6, 2019 at 10:42 AM Christian Hemp <christian.hemp@posteo.de> wrote:
>
> The phyCORE-i.MX8M aka PCL-066 is a SoM containing a i.MX8M SoC.
>
> phyCORE-i.MX8M:
> - 1GB LPDDR4 RAM
> - eMMC
> - microSD
> - Ethernet
>
> Signed-off-by: Christian Hemp <christian.hemp@posteo.de>
> ---
> arch/arm/boards/Makefile | 1 +
> arch/arm/boards/phytec-som-imx8m/.gitignore | 1 +
> arch/arm/boards/phytec-som-imx8m/Makefile | 2 +
> arch/arm/boards/phytec-som-imx8m/board.c | 55 +
> arch/arm/boards/phytec-som-imx8m/ddr.h | 28 +
> arch/arm/boards/phytec-som-imx8m/ddr_init.c | 225 +++++
> .../boards/phytec-som-imx8m/ddrphy_train.c | 947 ++++++++++++++++++
> .../flash-header-phycore-imx8mq.imxcfg | 5 +
> arch/arm/boards/phytec-som-imx8m/lowlevel.c | 127 +++
> arch/arm/configs/imx_v8_defconfig | 2 +
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/imx8mq-phytec-phycore-som.dts | 328 ++++++
> arch/arm/mach-imx/Kconfig | 7 +
> images/Makefile.imx | 5 +
> 14 files changed, 1734 insertions(+)
> create mode 100644 arch/arm/boards/phytec-som-imx8m/.gitignore
> create mode 100644 arch/arm/boards/phytec-som-imx8m/Makefile
> create mode 100644 arch/arm/boards/phytec-som-imx8m/board.c
> create mode 100644 arch/arm/boards/phytec-som-imx8m/ddr.h
> create mode 100644 arch/arm/boards/phytec-som-imx8m/ddr_init.c
> create mode 100644 arch/arm/boards/phytec-som-imx8m/ddrphy_train.c
> create mode 100644 arch/arm/boards/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg
> create mode 100644 arch/arm/boards/phytec-som-imx8m/lowlevel.c
> create mode 100644 arch/arm/dts/imx8mq-phytec-phycore-som.dts
>
> diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> index ab5191fe0..b39bbe8c2 100644
> --- a/arch/arm/boards/Makefile
> +++ b/arch/arm/boards/Makefile
> @@ -95,6 +95,7 @@ obj-$(CONFIG_MACH_PCM049) += phytec-phycore-omap4460/
> obj-$(CONFIG_MACH_PHYTEC_SOM_AM335X) += phytec-som-am335x/
> obj-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += phytec-som-imx6/
> obj-$(CONFIG_MACH_PHYTEC_PHYCORE_IMX7) += phytec-phycore-imx7/
> +obj-$(CONFIG_MACH_PHYTEC_SOM_IMX8M) += phytec-som-imx8m/
> obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3) += plathome-openblocks-ax3/
> obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += plathome-openblocks-a6/
> obj-$(CONFIG_MACH_PM9261) += pm9261/
> diff --git a/arch/arm/boards/phytec-som-imx8m/.gitignore b/arch/arm/boards/phytec-som-imx8m/.gitignore
> new file mode 100644
> index 000000000..ef13747c9
> --- /dev/null
> +++ b/arch/arm/boards/phytec-som-imx8m/.gitignore
> @@ -0,0 +1 @@
> +*.ddr-phy-fw*
> diff --git a/arch/arm/boards/phytec-som-imx8m/Makefile b/arch/arm/boards/phytec-som-imx8m/Makefile
> new file mode 100644
> index 000000000..2995f06f0
> --- /dev/null
> +++ b/arch/arm/boards/phytec-som-imx8m/Makefile
> @@ -0,0 +1,2 @@
> +obj-y += board.o
> +lwl-y += lowlevel.o ddr_init.o ddrphy_train.o
> diff --git a/arch/arm/boards/phytec-som-imx8m/board.c b/arch/arm/boards/phytec-som-imx8m/board.c
> new file mode 100644
> index 000000000..7779946d1
> --- /dev/null
> +++ b/arch/arm/boards/phytec-som-imx8m/board.c
> @@ -0,0 +1,55 @@
> +/*
> + * Copyright (C) 2018 Christian Hemp
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation.
> + *
> + */
> +
> +#include <asm/memory.h>
> +#include <bootsource.h>
> +#include <environment.h>
> +#include <common.h>
> +#include <init.h>
> +#include <linux/sizes.h>
> +#include <mach/bbu.h>
> +
> +#include <envfs.h>
> +
> +static int physom_imx8m_devices_init(void)
> +{
> + int flags;
> +
> + if (!of_machine_is_compatible("phytec,imx8mq-pcl066"))
> + return 0;
> +
> + barebox_set_hostname("phycore-imx8mq");
> +
> + flags = bootsource_get_instance() == 0 ? BBU_HANDLER_FLAG_DEFAULT : 0;
> + imx8mq_bbu_internal_mmc_register_handler("eMMC",
> + "/dev/mmc0.barebox", flags);
> +
> + flags = bootsource_get_instance() == 1 ? BBU_HANDLER_FLAG_DEFAULT : 0;
> + imx8mq_bbu_internal_mmc_register_handler("SD",
> + "/dev/mmc1.barebox", flags);
> +
> + if (bootsource_get_instance() == 0)
> + of_device_enable_path("/chosen/environment-emmc");
> + else
> + of_device_enable_path("/chosen/environment-sd");
> +
I made a similar suggestion to Lucas when he submitted that code for
EVK board, so at the risk of sounding like a broken record, you can
simplify this to:
switch (bootsource_get_instance()) {
case 0:
flags_mmc = BBU_HANDLER_FLAG_DEFAULT;
flags_sd = 0;
of_device_enable_path("/chosen/environment-emmc");
break;
case 1:
flags_mmc = 0;
flags_sd = BBU_HANDLER_FLAG_DEFAULT;
of_device_enable_path("/chosen/environment-sd");
break;
}
imx8mq_bbu_internal_mmc_register_handler("eMMC", "/dev/mmc0.barebox",
flags_mmc);
imx8mq_bbu_internal_mmc_register_handler("SD", "/dev/mmc1.barebox",
flags_sd);
Thanks,
Andrey Smirnov
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] ARM: phyCORE-i.MX8M SOM support
2019-02-06 18:41 [PATCH] ARM: phyCORE-i.MX8M SOM support Christian Hemp
2019-02-07 1:20 ` Andrey Smirnov
@ 2019-02-11 8:20 ` Sascha Hauer
2019-02-11 11:00 ` Lucas Stach
2 siblings, 0 replies; 6+ messages in thread
From: Sascha Hauer @ 2019-02-11 8:20 UTC (permalink / raw)
To: Christian Hemp; +Cc: barebox
Hi Christian,
On Wed, Feb 06, 2019 at 07:41:22PM +0100, Christian Hemp wrote:
> The phyCORE-i.MX8M aka PCL-066 is a SoM containing a i.MX8M SoC.
>
> phyCORE-i.MX8M:
> - 1GB LPDDR4 RAM
> - eMMC
> - microSD
> - Ethernet
> > +
> diff --git a/arch/arm/dts/imx8mq-phytec-phycore-som.dts b/arch/arm/dts/imx8mq-phytec-phycore-som.dts
> new file mode 100644
> index 000000000..7b566e32b
> --- /dev/null
> +++ b/arch/arm/dts/imx8mq-phytec-phycore-som.dts
> @@ -0,0 +1,328 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2018 Christian Hemp <christian.hemp@posteo.de>
> + */
> +
> +/dts-v1/;
> +
> +#include <arm64/freescale/imx8mq.dtsi>
> +#include <dt-bindings/net/ti-dp83867.h>
> +#include "imx8mq.dtsi"
> +#include "imx8mq-ddrc.dtsi"
> +
> +/ {
> + model = "Phytec phyCORE-i.MX8";
> + compatible = "phytec,imx8mq-pcl066", "fsl,imx8mq";
> +
> + chosen {
> + stdout-path = &uart1;
> +
> + environment-emmc {
> + compatible = "barebox,environment";
> + device-path = &usdhc1, "partname:barebox-environment";
> + status = "disabled";
> + };
> +
> + environment-sd {
> + compatible = "barebox,environment";
> + device-path = &usdhc2, "partname:barebox-environment";
> + status = "disabled";
> + };
I pretty much prefer adding a phandle to the partition itself rather
than using this "partname:" mechanism.
Otherwise the patch looks good to me.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] ARM: phyCORE-i.MX8M SOM support
2019-02-06 18:41 [PATCH] ARM: phyCORE-i.MX8M SOM support Christian Hemp
2019-02-07 1:20 ` Andrey Smirnov
2019-02-11 8:20 ` Sascha Hauer
@ 2019-02-11 11:00 ` Lucas Stach
2019-02-13 6:14 ` Oleksij Rempel
2 siblings, 1 reply; 6+ messages in thread
From: Lucas Stach @ 2019-02-11 11:00 UTC (permalink / raw)
To: Christian Hemp, barebox
Hi Christian,
Am Mittwoch, den 06.02.2019, 19:41 +0100 schrieb Christian Hemp:
> The phyCORE-i.MX8M aka PCL-066 is a SoM containing a i.MX8M SoC.
>
> phyCORE-i.MX8M:
> - 1GB LPDDR4 RAM
> - eMMC
> - microSD
> - Ethernet
>
> Signed-off-by: Christian Hemp <christian.hemp@posteo.de>
> ---
> arch/arm/boards/Makefile | 1 +
> arch/arm/boards/phytec-som-imx8m/.gitignore | 1 +
> arch/arm/boards/phytec-som-imx8m/Makefile | 2 +
> arch/arm/boards/phytec-som-imx8m/board.c | 55 +
> arch/arm/boards/phytec-som-imx8m/ddr.h | 28 +
> arch/arm/boards/phytec-som-imx8m/ddr_init.c | 225 +++++
> .../boards/phytec-som-imx8m/ddrphy_train.c | 947 ++++++++++++++++++
> .../flash-header-phycore-imx8mq.imxcfg | 5 +
> arch/arm/boards/phytec-som-imx8m/lowlevel.c | 127 +++
> arch/arm/configs/imx_v8_defconfig | 2 +
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/imx8mq-phytec-phycore-som.dts | 328 ++++++
> arch/arm/mach-imx/Kconfig | 7 +
> images/Makefile.imx | 5 +
> 14 files changed, 1734 insertions(+)
> create mode 100644 arch/arm/boards/phytec-som-imx8m/.gitignore
> create mode 100644 arch/arm/boards/phytec-som-imx8m/Makefile
> create mode 100644 arch/arm/boards/phytec-som-imx8m/board.c
> create mode 100644 arch/arm/boards/phytec-som-imx8m/ddr.h
> create mode 100644 arch/arm/boards/phytec-som-imx8m/ddr_init.c
> create mode 100644 arch/arm/boards/phytec-som-imx8m/ddrphy_train.c
> create mode 100644 arch/arm/boards/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg
> create mode 100644 arch/arm/boards/phytec-som-imx8m/lowlevel.c
> create mode 100644 arch/arm/dts/imx8mq-phytec-phycore-som.dts
The other supported i.MX8M boards are using a "imx8mq" name tag. I
would really like to see some consistency here, as the i.MX8 naming in
general is already confusing in itself, so we shouldn't add to this
confusion by calling the same SoC both mx8m and mx8mq.
Regards,
Lucas
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] ARM: phyCORE-i.MX8M SOM support
2019-02-11 11:00 ` Lucas Stach
@ 2019-02-13 6:14 ` Oleksij Rempel
2019-02-14 18:20 ` Christian
0 siblings, 1 reply; 6+ messages in thread
From: Oleksij Rempel @ 2019-02-13 6:14 UTC (permalink / raw)
To: Lucas Stach; +Cc: barebox, Christian Hemp
Hi Christian,
On Mon, Feb 11, 2019 at 12:00:58PM +0100, Lucas Stach wrote:
> Hi Christian,
>
> Am Mittwoch, den 06.02.2019, 19:41 +0100 schrieb Christian Hemp:
> > The phyCORE-i.MX8M aka PCL-066 is a SoM containing a i.MX8M SoC.
> >
> > phyCORE-i.MX8M:
> > - 1GB LPDDR4 RAM
> > - eMMC
> > - microSD
> > - Ethernet
> >
> > Signed-off-by: Christian Hemp <christian.hemp@posteo.de>
> > ---
> > arch/arm/boards/Makefile | 1 +
> > arch/arm/boards/phytec-som-imx8m/.gitignore | 1 +
> > arch/arm/boards/phytec-som-imx8m/Makefile | 2 +
> > arch/arm/boards/phytec-som-imx8m/board.c | 55 +
> > arch/arm/boards/phytec-som-imx8m/ddr.h | 28 +
> > arch/arm/boards/phytec-som-imx8m/ddr_init.c | 225 +++++
> > .../boards/phytec-som-imx8m/ddrphy_train.c | 947 ++++++++++++++++++
> > .../flash-header-phycore-imx8mq.imxcfg | 5 +
> > arch/arm/boards/phytec-som-imx8m/lowlevel.c | 127 +++
> > arch/arm/configs/imx_v8_defconfig | 2 +
> > arch/arm/dts/Makefile | 1 +
> > arch/arm/dts/imx8mq-phytec-phycore-som.dts | 328 ++++++
> > arch/arm/mach-imx/Kconfig | 7 +
> > images/Makefile.imx | 5 +
> > 14 files changed, 1734 insertions(+)
> > create mode 100644 arch/arm/boards/phytec-som-imx8m/.gitignore
> > create mode 100644 arch/arm/boards/phytec-som-imx8m/Makefile
> > create mode 100644 arch/arm/boards/phytec-som-imx8m/board.c
> > create mode 100644 arch/arm/boards/phytec-som-imx8m/ddr.h
> > create mode 100644 arch/arm/boards/phytec-som-imx8m/ddr_init.c
> > create mode 100644 arch/arm/boards/phytec-som-imx8m/ddrphy_train.c
> > create mode 100644 arch/arm/boards/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg
> > create mode 100644 arch/arm/boards/phytec-som-imx8m/lowlevel.c
> > create mode 100644 arch/arm/dts/imx8mq-phytec-phycore-som.dts
>
> The other supported i.MX8M boards are using a "imx8mq" name tag. I
> would really like to see some consistency here, as the i.MX8 naming in
> general is already confusing in itself, so we shouldn't add to this
> confusion by calling the same SoC both mx8m and mx8mq.
I tested your patch and needed following changes to make it work with
latest barebox:
diff --git a/arch/arm/boards/phytec-som-imx8m/ddr.h b/arch/arm/boards/phytec-som-imx8m/ddr.h
index 7d195e6002..58a1c91be3 100644
--- a/arch/arm/boards/phytec-som-imx8m/ddr.h
+++ b/arch/arm/boards/phytec-som-imx8m/ddr.h
@@ -20,9 +20,8 @@
void phytec_imx8mq_phycore_ddr_init(void);
void phytec_imx8mq_phycore_ddr_cfg_phy(void);
-#define FW_1D_IMAGE imx_lpddr4_pmu_train_1d_imem_bin, \
- imx_lpddr4_pmu_train_1d_dmem_bin
-#define FW_2D_IMAGE imx_lpddr4_pmu_train_2d_imem_bin, \
- imx_lpddr4_pmu_train_2d_dmem_bin
-
+#define FW_1D_IMAGE lpddr4_pmu_train_1d_imem_bin, \
+ lpddr4_pmu_train_1d_dmem_bin
+#define FW_2D_IMAGE lpddr4_pmu_train_2d_imem_bin, \
+ lpddr4_pmu_train_2d_dmem_bin
diff --git a/arch/arm/boards/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg b/arch/arm/boards/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg
index aff8321b9a..eabc9426c7 100644
--- a/arch/arm/boards/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg
+++ b/arch/arm/boards/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg
@@ -3,3 +3,4 @@ soc imx8mq
loadaddr 0x007E1000
max_load_size 0x3F000
dcdofs 0x400
+signed_hdmi_firmware firmware/signed_hdmi_imx8m.bin
diff --git a/arch/arm/boards/phytec-som-imx8m/lowlevel.c b/arch/arm/boards/phytec-som-imx8m/lowlevel.c
index 4a1054a5eb..bd13fd1860 100644
--- a/arch/arm/boards/phytec-som-imx8m/lowlevel.c
+++ b/arch/arm/boards/phytec-som-imx8m/lowlevel.c
@@ -115,7 +115,7 @@ ENTRY_FUNCTION(start_phytec_phycore_imx8mq, r0, r1, r2)
const u8 *bl31;
size_t bl31_size;
- get_builtin_firmware(imx_imx8m_bl31_bin, &bl31, &bl31_size);
+ get_builtin_firmware(imx8mq_bl31_bin, &bl31, &bl31_size);
imx8mq_atf_load_bl31(bl31, bl31_size);
}
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] ARM: phyCORE-i.MX8M SOM support
2019-02-13 6:14 ` Oleksij Rempel
@ 2019-02-14 18:20 ` Christian
0 siblings, 0 replies; 6+ messages in thread
From: Christian @ 2019-02-14 18:20 UTC (permalink / raw)
To: Oleksij Rempel; +Cc: barebox
Hi,
I will send a second version.
Regards
Christian
Am Mittwoch, 13. Februar 2019, 07:14:59 CET schrieb Oleksij Rempel:
> Hi Christian,
>
> On Mon, Feb 11, 2019 at 12:00:58PM +0100, Lucas Stach wrote:
> > Hi Christian,
> >
> > Am Mittwoch, den 06.02.2019, 19:41 +0100 schrieb Christian Hemp:
> > > The phyCORE-i.MX8M aka PCL-066 is a SoM containing a i.MX8M SoC.
> > >
> > > phyCORE-i.MX8M:
> > > - 1GB LPDDR4 RAM
> > > - eMMC
> > > - microSD
> > > - Ethernet
> > >
> > > Signed-off-by: Christian Hemp <christian.hemp@posteo.de>
> > > ---
> > > arch/arm/boards/Makefile | 1 +
> > > arch/arm/boards/phytec-som-imx8m/.gitignore | 1 +
> > > arch/arm/boards/phytec-som-imx8m/Makefile | 2 +
> > > arch/arm/boards/phytec-som-imx8m/board.c | 55 +
> > > arch/arm/boards/phytec-som-imx8m/ddr.h | 28 +
> > > arch/arm/boards/phytec-som-imx8m/ddr_init.c | 225 +++++
> > > .../boards/phytec-som-imx8m/ddrphy_train.c | 947 ++++++++++++++++++
> > > .../flash-header-phycore-imx8mq.imxcfg | 5 +
> > > arch/arm/boards/phytec-som-imx8m/lowlevel.c | 127 +++
> > > arch/arm/configs/imx_v8_defconfig | 2 +
> > > arch/arm/dts/Makefile | 1 +
> > > arch/arm/dts/imx8mq-phytec-phycore-som.dts | 328 ++++++
> > > arch/arm/mach-imx/Kconfig | 7 +
> > > images/Makefile.imx | 5 +
> > > 14 files changed, 1734 insertions(+)
> > > create mode 100644 arch/arm/boards/phytec-som-imx8m/.gitignore
> > > create mode 100644 arch/arm/boards/phytec-som-imx8m/Makefile
> > > create mode 100644 arch/arm/boards/phytec-som-imx8m/board.c
> > > create mode 100644 arch/arm/boards/phytec-som-imx8m/ddr.h
> > > create mode 100644 arch/arm/boards/phytec-som-imx8m/ddr_init.c
> > > create mode 100644 arch/arm/boards/phytec-som-imx8m/ddrphy_train.c
> > > create mode 100644
> > > arch/arm/boards/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg
> > > create mode 100644 arch/arm/boards/phytec-som-imx8m/lowlevel.c
> > > create mode 100644 arch/arm/dts/imx8mq-phytec-phycore-som.dts
> >
> > The other supported i.MX8M boards are using a "imx8mq" name tag. I
> > would really like to see some consistency here, as the i.MX8 naming in
> > general is already confusing in itself, so we shouldn't add to this
> > confusion by calling the same SoC both mx8m and mx8mq.
>
> I tested your patch and needed following changes to make it work with
> latest barebox:
>
> diff --git a/arch/arm/boards/phytec-som-imx8m/ddr.h
> b/arch/arm/boards/phytec-som-imx8m/ddr.h index 7d195e6002..58a1c91be3
> 100644
> --- a/arch/arm/boards/phytec-som-imx8m/ddr.h
> +++ b/arch/arm/boards/phytec-som-imx8m/ddr.h
> @@ -20,9 +20,8 @@
> void phytec_imx8mq_phycore_ddr_init(void);
> void phytec_imx8mq_phycore_ddr_cfg_phy(void);
>
> -#define FW_1D_IMAGE imx_lpddr4_pmu_train_1d_imem_bin, \
> - imx_lpddr4_pmu_train_1d_dmem_bin
> -#define FW_2D_IMAGE imx_lpddr4_pmu_train_2d_imem_bin, \
> - imx_lpddr4_pmu_train_2d_dmem_bin
> -
> +#define FW_1D_IMAGE lpddr4_pmu_train_1d_imem_bin, \
> + lpddr4_pmu_train_1d_dmem_bin
> +#define FW_2D_IMAGE lpddr4_pmu_train_2d_imem_bin, \
> + lpddr4_pmu_train_2d_dmem_bin
>
> diff --git
> a/arch/arm/boards/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg
> b/arch/arm/boards/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg index
> aff8321b9a..eabc9426c7 100644
> --- a/arch/arm/boards/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg
> +++ b/arch/arm/boards/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg
> @@ -3,3 +3,4 @@ soc imx8mq
> loadaddr 0x007E1000
> max_load_size 0x3F000
> dcdofs 0x400
> +signed_hdmi_firmware firmware/signed_hdmi_imx8m.bin
> diff --git a/arch/arm/boards/phytec-som-imx8m/lowlevel.c
> b/arch/arm/boards/phytec-som-imx8m/lowlevel.c index 4a1054a5eb..bd13fd1860
> 100644
> --- a/arch/arm/boards/phytec-som-imx8m/lowlevel.c
> +++ b/arch/arm/boards/phytec-som-imx8m/lowlevel.c
> @@ -115,7 +115,7 @@ ENTRY_FUNCTION(start_phytec_phycore_imx8mq, r0, r1, r2)
> const u8 *bl31;
> size_t bl31_size;
>
> - get_builtin_firmware(imx_imx8m_bl31_bin, &bl31, &bl31_size);
> + get_builtin_firmware(imx8mq_bl31_bin, &bl31, &bl31_size);
> imx8mq_atf_load_bl31(bl31, bl31_size);
> }
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-02-14 18:20 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-06 18:41 [PATCH] ARM: phyCORE-i.MX8M SOM support Christian Hemp
2019-02-07 1:20 ` Andrey Smirnov
2019-02-11 8:20 ` Sascha Hauer
2019-02-11 11:00 ` Lucas Stach
2019-02-13 6:14 ` Oleksij Rempel
2019-02-14 18:20 ` Christian
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox