mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Marco Felsch <m.felsch@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 2/2] memory: of_fixup: adapt to new memory layout
Date: Tue, 12 Feb 2019 09:56:22 +0100	[thread overview]
Message-ID: <20190212085622.ni5juzgay6ifrsuf@pengutronix.de> (raw)
In-Reply-To: <20190212084525.l5xsdltn6kq5bv2q@pengutronix.de>

On Tue, Feb 12, 2019 at 09:45:25AM +0100, Marco Felsch wrote:
> Hi Sascha,
> 
> On 19-02-12 09:03, Sascha Hauer wrote:
> > On Mon, Feb 11, 2019 at 05:20:13PM +0100, Marco Felsch wrote:
> > > Since kernel 4.16 the memory nodes got a @<reg> suffix so the fixup
> > > won't work correctly anymore, because instead of adapting the extisting
> > > one it creates a new node.
> > > 
> > > To be compatible with the old and new layout delete the found memory
> > > node and create a new one. The new node follows the new @<reg> style.
> > > 
> > > The patch also renames the node element to root to make it more clear.
> > > 
> > > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> > > ---
> > >  common/memory.c | 24 ++++++++++++++++++++++--
> > >  1 file changed, 22 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/common/memory.c b/common/memory.c
> > > index 00fa7c50ff..5402acab8e 100644
> > > --- a/common/memory.c
> > > +++ b/common/memory.c
> > > @@ -224,7 +224,7 @@ int memory_bank_first_find_space(resource_size_t *retstart,
> > >  
> > >  #ifdef CONFIG_OFTREE
> > >  
> > > -static int of_memory_fixup(struct device_node *node, void *unused)
> > > +static int of_memory_fixup(struct device_node *root, void *unused)
> > >  {
> > >  	struct memory_bank *bank;
> > >  	int err;
> > > @@ -232,7 +232,23 @@ static int of_memory_fixup(struct device_node *node, void *unused)
> > >  	struct device_node *memnode;
> > >  	u8 tmp[16 * 16]; /* Up to 64-bit address + 64-bit size */
> > >  
> > > -	memnode = of_create_node(node, "/memory");
> > > +	/*
> > > +	 * Since kernel 4.16 the memory node got a @<reg> suffix. To support
> > > +	 * the old and the new style delete any found memory node and add it
> > > +	 * again to be sure that the memory node exists only once. It shouldn't
> > > +	 * bother older kernels if the memory node has this suffix so adding it
> > > +	 * following the new style.
> > > +	 */
> > > +
> > > +	memnode = of_find_node_by_name(root, "memory");
> > 
> > We don't need this as the /memory node must have device_type = memory.
> 
> Okay, tought about the old devicetrees where the QA wasn't that good. I
> will drop this.
> 
> > 
> > > +	if (!memnode)
> > > +		memnode = of_find_node_by_type(root, "memory");
> > 
> > You shouldn't assume that there's only one /memory node. There can be
> > multiple.
> 
> Sure.. damn, checked only a few devicetree's where multiple banks are
> mapped to the reg property. I will change this.
> 
> > The /memory node must be a direct child of the root node, so it's
> > unnecessary to traverse the whole tree using of_find_node_by_type().
> > Something like for_each_child_of_node_safe(root, tmp, np) fits better.
> 
> Okay.
> 
> > 
> > > +
> > > +	if (memnode)
> > > +		of_delete_node(memnode);
> > > +
> > > +	/* At this moment we don't know the <reg> val */
> > > +	memnode = of_create_node(root, "/memory");
> > >  	if (!memnode)
> > >  		return -ENOMEM;
> > >  
> > > @@ -256,6 +272,10 @@ static int of_memory_fixup(struct device_node *node, void *unused)
> > >  		return err;
> > >  	}
> > >  
> > > +	/* now adapt the node name */
> > > +	of_rename_node(memnode, basprintf("memory@%llx",
> > > +				 of_read_number((u32 *)tmp, addr_cell_len)));
> > 
> > It's also allowed to create one /memory node per memory bank. Maybe
> > that's more straightforward to implement.
> 
> Is it wrong to adapt the name later? As specified by DT-Spec [1], the
> @<reg> should be set to the first address.

What do they mean with the first address? Currently the memory banks in
barebox are not sorted, so you are setting @reg indeed to the first
address, but this is not currently necessarily the lowest one.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2019-02-12  8:56 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-11 16:20 [PATCH 1/2] of: base: add helper to rename a node Marco Felsch
2019-02-11 16:20 ` [PATCH 2/2] memory: of_fixup: adapt to new memory layout Marco Felsch
2019-02-12  8:03   ` Sascha Hauer
2019-02-12  8:45     ` Marco Felsch
2019-02-12  8:56       ` Sascha Hauer [this message]
2019-02-12  9:01         ` Marco Felsch
2019-02-12  7:32 ` [PATCH 1/2] of: base: add helper to rename a node Sascha Hauer
2019-02-12  8:49   ` Marco Felsch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190212085622.ni5juzgay6ifrsuf@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=m.felsch@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox