From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Stefan Riedmueller <s.riedmueller@phytec.de>,
barebox@lists.infradead.org
Subject: [PATCH v3] ARM: dts: imx6*phytec*: switch to new partitioning scheme
Date: Tue, 19 Feb 2019 14:03:02 +0100 [thread overview]
Message-ID: <20190219130302.12412-1-u.kleine-koenig@pengutronix.de> (raw)
In-Reply-To: <98063d5d-7da8-0034-bb66-223318d1f1a2@phytec.de>
Both Linux and barebox support this new scheme and it's the actually
the recommended one.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
Hello,
On Tue, Feb 19, 2019 at 11:54:07AM +0100, Stefan Riedmüller wrote:
> On 19.02.19 11:28, Uwe Kleine-König wrote:
> > Both Linux and barebox support this new scheme and it's the actually
> > the recommended one.
> >
> > Signed-off-by: Uwe Kleine-König<u.kleine-koenig@pengutronix.de>
> > ---
> > On Tue, Feb 19, 2019 at 11:08:56AM +0100, Stefan Riedmüller wrote:
> > > thanks for the patch.
> > >
> > > In arch/arm/dts/imx6qdl-phytec-pfla02.dtsi and
> > > arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi are additional gpmi partitions.
> > > Did you leave them out for a reason. I think they can be matched to the new
> > > scheme too.
> > I didn't skip something on purpose. I just didn't notice there are two
> > partitioned devices. Fixed here in v2.
>
> Sorry to bother you again, but it seems the gpmi partitions on the
> arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi were missed again.
On rereading your mail I was really surprised you wrote about two device
trees. I only noticed one, and so I only fixed one. So it's not you who
need to be sorry ... :-|
Best regards
Uwe
.../dts/imx6dl-phytec-phycore-som-emmc.dts | 21 +++---
.../dts/imx6dl-phytec-phycore-som-nand.dts | 21 +++---
arch/arm/dts/imx6q-phytec-pcaaxl3.dtsi | 30 ++++----
.../arm/dts/imx6q-phytec-phycore-som-emmc.dts | 21 +++---
.../arm/dts/imx6q-phytec-phycore-som-nand.dts | 25 ++++---
arch/arm/dts/imx6qdl-phytec-pfla02.dtsi | 74 +++++++++---------
arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi | 75 ++++++++++---------
.../dts/imx6qp-phytec-phycore-som-nand.dts | 21 +++---
arch/arm/dts/imx6ul-phytec-phycore-som.dtsi | 29 +++----
9 files changed, 176 insertions(+), 141 deletions(-)
diff --git a/arch/arm/dts/imx6dl-phytec-phycore-som-emmc.dts b/arch/arm/dts/imx6dl-phytec-phycore-som-emmc.dts
index 7e4a5aba2a77..e602b77e9940 100644
--- a/arch/arm/dts/imx6dl-phytec-phycore-som-emmc.dts
+++ b/arch/arm/dts/imx6dl-phytec-phycore-som-emmc.dts
@@ -52,17 +52,20 @@
&usdhc1 {
status = "okay";
- #address-cells = <1>;
- #size-cells = <1>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@0 {
- label = "barebox";
- reg = <0x0 0xe0000>;
- };
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0xe0000>;
+ };
- partition@e0000 {
- label = "barebox-environment";
- reg = <0xe0000 0x20000>;
+ partition@e0000 {
+ label = "barebox-environment";
+ reg = <0xe0000 0x20000>;
+ };
};
};
diff --git a/arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts b/arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts
index ffcbdc213471..77f143438b50 100644
--- a/arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts
+++ b/arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts
@@ -47,16 +47,19 @@
&usdhc1 {
status = "okay";
- #address-cells = <1>;
- #size-cells = <1>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@0 {
- label = "barebox";
- reg = <0x0 0xe0000>;
- };
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0xe0000>;
+ };
- partition@e0000 {
- label = "barebox-environment";
- reg = <0xe0000 0x20000>;
+ partition@e0000 {
+ label = "barebox-environment";
+ reg = <0xe0000 0x20000>;
+ };
};
};
diff --git a/arch/arm/dts/imx6q-phytec-pcaaxl3.dtsi b/arch/arm/dts/imx6q-phytec-pcaaxl3.dtsi
index 63dd966b8746..66b547ad8eef 100644
--- a/arch/arm/dts/imx6q-phytec-pcaaxl3.dtsi
+++ b/arch/arm/dts/imx6q-phytec-pcaaxl3.dtsi
@@ -131,22 +131,26 @@
pinctrl-0 = <&pinctrl_gpmi_nand>;
nand-on-flash-bbt;
status = "okay";
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "barebox";
- reg = <0x0 0x400000>;
- };
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- environment_nand: partition@400000 {
- label = "barebox-environment";
- reg = <0x400000 0x20000>;
- };
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0x400000>;
+ };
- partition@420000 {
- label = "root";
- reg = <0x420000 0x0>;
+ environment_nand: partition@400000 {
+ label = "barebox-environment";
+ reg = <0x400000 0x20000>;
+ };
+
+ partition@420000 {
+ label = "root";
+ reg = <0x420000 0x0>;
+ };
};
};
diff --git a/arch/arm/dts/imx6q-phytec-phycore-som-emmc.dts b/arch/arm/dts/imx6q-phytec-phycore-som-emmc.dts
index 6e12b26d38a2..94a70389f084 100644
--- a/arch/arm/dts/imx6q-phytec-phycore-som-emmc.dts
+++ b/arch/arm/dts/imx6q-phytec-phycore-som-emmc.dts
@@ -51,17 +51,20 @@
&usdhc1 {
status = "okay";
- #address-cells = <1>;
- #size-cells = <1>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@0 {
- label = "barebox";
- reg = <0x0 0xe0000>;
- };
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0xe0000>;
+ };
- partition@e0000 {
- label = "barebox-environment";
- reg = <0xe0000 0x20000>;
+ partition@e0000 {
+ label = "barebox-environment";
+ reg = <0xe0000 0x20000>;
+ };
};
};
diff --git a/arch/arm/dts/imx6q-phytec-phycore-som-nand.dts b/arch/arm/dts/imx6q-phytec-phycore-som-nand.dts
index d9e37b7fcafc..6d82ec34d6e5 100644
--- a/arch/arm/dts/imx6q-phytec-phycore-som-nand.dts
+++ b/arch/arm/dts/imx6q-phytec-phycore-som-nand.dts
@@ -56,16 +56,19 @@
&usdhc1 {
status = "okay";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "barebox";
- reg = <0x0 0xe0000>;
- };
-
- partition@e0000 {
- label = "barebox-environment";
- reg = <0xe0000 0x20000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0xe0000>;
+ };
+
+ partition@e0000 {
+ label = "barebox-environment";
+ reg = <0xe0000 0x20000>;
+ };
};
};
diff --git a/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi
index 8bb9ec8db7c6..aba86a3ec1c4 100644
--- a/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi
@@ -58,27 +58,30 @@
&ecspi3 {
flash: flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "barebox";
- reg = <0x0 0x100000>;
- };
-
- partition@100000 {
- label = "barebox-environment";
- reg = <0x100000 0x20000>;
- };
-
- partition@120000 {
- label = "oftree";
- reg = <0x120000 0x20000>;
- };
-
- partition@140000 {
- label = "kernel";
- reg = <0x140000 0x0>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0x100000>;
+ };
+
+ partition@100000 {
+ label = "barebox-environment";
+ reg = <0x100000 0x20000>;
+ };
+
+ partition@120000 {
+ label = "oftree";
+ reg = <0x120000 0x20000>;
+ };
+
+ partition@140000 {
+ label = "kernel";
+ reg = <0x140000 0x0>;
+ };
};
};
};
@@ -101,22 +104,25 @@
};
&gpmi {
- #address-cells = <1>;
- #size-cells = <1>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@0 {
- label = "barebox";
- reg = <0x0 0x400000>;
- };
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0x400000>;
+ };
- partition@400000 {
- label = "barebox-environment";
- reg = <0x400000 0x100000>;
- };
+ partition@400000 {
+ label = "barebox-environment";
+ reg = <0x400000 0x100000>;
+ };
- partition@500000 {
- label = "root";
- reg = <0x500000 0x0>;
+ partition@500000 {
+ label = "root";
+ reg = <0x500000 0x0>;
+ };
};
};
diff --git a/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi
index 3c197ddf018b..8fde27bd0c17 100644
--- a/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -76,27 +76,30 @@
reg = <0>;
status = "disabled";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "barebox";
- reg = <0x0 0x100000>;
- };
-
- partition@100000 {
- label = "barebox-environment";
- reg = <0x100000 0x20000>;
- };
-
- partition@120000 {
- label = "oftree";
- reg = <0x120000 0x20000>;
- };
-
- partition@140000 {
- label = "kernel";
- reg = <0x140000 0x0>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0x100000>;
+ };
+
+ partition@100000 {
+ label = "barebox-environment";
+ reg = <0x100000 0x20000>;
+ };
+
+ partition@120000 {
+ label = "oftree";
+ reg = <0x120000 0x20000>;
+ };
+
+ partition@140000 {
+ label = "kernel";
+ reg = <0x140000 0x0>;
+ };
};
};
};
@@ -126,22 +129,26 @@
pinctrl-0 = <&pinctrl_gpmi_nand>;
nand-on-flash-bbt;
status = "disabled";
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "barebox";
- reg = <0x0 0x400000>;
- };
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@400000 {
- label = "barebox-environment";
- reg = <0x400000 0x100000>;
- };
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0x400000>;
+ };
- partition@500000 {
- label = "root";
- reg = <0x500000 0x0>;
+ partition@400000 {
+ label = "barebox-environment";
+ reg = <0x400000 0x100000>;
+ };
+
+ partition@500000 {
+ label = "root";
+ reg = <0x500000 0x0>;
+ };
};
};
diff --git a/arch/arm/dts/imx6qp-phytec-phycore-som-nand.dts b/arch/arm/dts/imx6qp-phytec-phycore-som-nand.dts
index c2756142b535..437457ce7522 100644
--- a/arch/arm/dts/imx6qp-phytec-phycore-som-nand.dts
+++ b/arch/arm/dts/imx6qp-phytec-phycore-som-nand.dts
@@ -54,16 +54,19 @@
&usdhc1 {
status = "okay";
- #address-cells = <1>;
- #size-cells = <1>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@0 {
- label = "barebox";
- reg = <0x0 0xe0000>;
- };
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0xe0000>;
+ };
- partition@e0000 {
- label = "barebox-environment";
- reg = <0xe0000 0x20000>;
+ partition@e0000 {
+ label = "barebox-environment";
+ reg = <0xe0000 0x20000>;
+ };
};
};
diff --git a/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
index 398546d7b92e..964f91950d93 100644
--- a/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
+++ b/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
@@ -51,22 +51,25 @@
nand-on-flash-bbt;
status = "disabled";
- #address-cells = <1>;
- #size-cells = <1>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@0 {
- label = "barebox";
- reg = <0x0 0x400000>;
- };
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0x400000>;
+ };
- partition@400000 {
- label = "barebox-environment";
- reg = <0x400000 0x100000>;
- };
+ partition@400000 {
+ label = "barebox-environment";
+ reg = <0x400000 0x100000>;
+ };
- partition@500000 {
- label = "root";
- reg = <0x500000 0x0>;
+ partition@500000 {
+ label = "root";
+ reg = <0x500000 0x0>;
+ };
};
};
--
2.20.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2019-02-19 13:03 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-18 21:08 [PATCH] " Uwe Kleine-König
2019-02-19 10:08 ` Stefan Riedmüller
2019-02-19 10:28 ` [PATCH v2] " Uwe Kleine-König
2019-02-19 10:54 ` Stefan Riedmüller
2019-02-19 13:03 ` Uwe Kleine-König [this message]
2019-03-05 15:45 ` [PATCH v3] " Stefan Riedmüller
2019-03-07 7:25 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190219130302.12412-1-u.kleine-koenig@pengutronix.de \
--to=u.kleine-koenig@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=s.riedmueller@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox