From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH v2 00/16] ARM: at91: microchip-kz9477-evb: support first stage boot
Date: Tue, 19 Feb 2019 18:21:34 +0100 [thread overview]
Message-ID: <20190219172150.11901-1-a.fatoum@pengutronix.de> (raw)
v1 is at <20190116174559.17416-1-a.fatoum@pengutronix.de>.
I tried to strip down barebox, so the first stage can be device tree
based as well. It boots up to trying to load the first stage from MMC,
where it fails. As it's very annoying to debug when only having few bytes
to spare, I am not sure if it's worth it. Future barebox updates might
increase size and break it again, so the first stage is again non-device
tree, but OFDEVICE can be selected and the curious user (you?) can try
to get the size further down and fix the bootstrap failure.
This patch set applies on top of "ARM: at91: misc fixes and cleanup",
<20190116174559.17416-1-a.fatoum@pengutronix.de>, which I sent out
earlier today.
Changes since v1:
- dropped removal of h32mx code, it was just touched by
ARM: at91: microchip-kz9477-evb: support first stage boot and might
be useful for future ports
- dropped removal of sama5d3_matrix.h, already mainline via
f722f2a12 ("ARM: at91: delete unused mach/sama5d3_matrix.h")
- added commit with BSD-1-Clause license text
- split the migration to the at91bootstrap header for SDRAM defines
into 3 separate commits for better comprehension as suggested by Sam
- arch-prefixed globally visible functions/defines
- copied over some helper functions from at91bootstrap for board init,
or moved them to headers, so board code can look more like at91bootstrap
board code
- moved some helper function into headers, so they can be used in
multiple boards in future
- replaced all __raw_{read,write}T with {read,write}T
- added separate entry point for first stage, like am335x does
- added build-time size check for first stage
- renamed _first_stage suffix to _bootstrap, for symmetry with
the other at91sam9261
- compressed the DTB
- added infrastructure for future device tree based first stage
- added documentation as suggested by Sam
- changed NAND partition layout in board code as suggested by Sascha
- stylistic fixes here and there
Ahmad Fatoum (16):
LICENSES: add BSD-1-Clause license
ARM: at91: import at91bootstrap's at91_ddrsdrc.h
ARM: at91: migrate at91sam9_ddrsdr.h to use at91bootstrap's
at91_ddrsdrc.h
ARM: at91: replace at91sam9_ddrsdr.h with at91bootstrap's
at91_ddrsdrc.h
ARM: at91: watchdog: implement at91_wdt_disable
ARM: at91: import lowlevel clock initialization from at91bootstrap
ARM: at91: import early_udelay from at91bootstrap
ARM: at91: import low level DDRAMC initialization code from
at91bootstrap
ARM: at91: import lowlevel dbgu UART init code from at91bootstrap
images: at91: differentiate between first and second stage images
ARM: at91: sama5: specify 0x10000 as first stage max size
ARM: at91: microchip-ksz9477-evb: use compressed DTB
ARM: dts: microchip-ksz9477-evb: add dummy first stage device tree
ARM: at91: microchip-ksz9477-evb: implement first stage
ARM: at91: microchip-ksz9477: provide board code fallback
doc: microchip-ksz9477-evb: add documentation
.../boards/at91/microchip-ksz9477-evb.rst | 38 +-
LICENSES/other/X11 | 28 +
LICENSES/preferred/BSD-1-Clause | 15 +
arch/arm/boards/at91sam9m10g45ek/lowlevel.c | 2 +-
arch/arm/boards/at91sam9m10ihd/lowlevel.c | 2 +-
arch/arm/boards/at91sam9n12ek/lowlevel.c | 2 +-
arch/arm/boards/at91sam9x5ek/lowlevel.c | 2 +-
.../arm/boards/microchip-ksz9477-evb/Makefile | 3 +
arch/arm/boards/microchip-ksz9477-evb/board.c | 129 +++++
.../boards/microchip-ksz9477-evb/lowlevel.c | 199 ++++++-
arch/arm/boards/pm9g45/lowlevel.c | 3 +-
arch/arm/boards/sama5d3_xplained/lowlevel.c | 2 +-
arch/arm/boards/sama5d3xek/lowlevel.c | 2 +-
arch/arm/boards/sama5d4_xplained/lowlevel.c | 2 +-
arch/arm/boards/sama5d4ek/lowlevel.c | 2 +-
...rochip_ksz9477_evb_bootstrap_mmc_defconfig | 24 +
arch/arm/dts/Makefile | 4 +-
.../at91-microchip-ksz9477-evb-boot-bin.dts | 13 +
arch/arm/mach-at91/Kconfig | 23 +-
arch/arm/mach-at91/Makefile | 3 +
arch/arm/mach-at91/at91sam9g45_devices.c | 2 +-
arch/arm/mach-at91/at91sam9g45_reset.S | 8 +-
arch/arm/mach-at91/at91sam9n12_devices.c | 2 +-
arch/arm/mach-at91/at91sam9x5_devices.c | 2 +-
arch/arm/mach-at91/ddramc.c | 518 ++++++++++++++++++
arch/arm/mach-at91/early_udelay.c | 53 ++
arch/arm/mach-at91/include/mach/at91_dbgu.h | 57 +-
.../arm/mach-at91/include/mach/at91_ddrsdrc.h | 390 +++++++++++++
.../include/mach/at91_lowlevel_clock.h | 52 ++
arch/arm/mach-at91/include/mach/at91_pmc.h | 24 +-
arch/arm/mach-at91/include/mach/at91_wdt.h | 16 +
.../mach-at91/include/mach/at91sam9_ddrsdr.h | 138 +----
arch/arm/mach-at91/include/mach/ddramc.h | 35 ++
.../arm/mach-at91/include/mach/early_udelay.h | 13 +
arch/arm/mach-at91/include/mach/sama5d3.h | 1 +
arch/arm/mach-at91/lowlevel_clock.c | 174 ++++++
arch/arm/mach-at91/sama5d3_devices.c | 2 +-
arch/arm/mach-at91/sama5d4_devices.c | 2 +-
images/Makefile.at91 | 16 +-
39 files changed, 1839 insertions(+), 164 deletions(-)
create mode 100644 LICENSES/other/X11
create mode 100644 LICENSES/preferred/BSD-1-Clause
create mode 100644 arch/arm/boards/microchip-ksz9477-evb/board.c
create mode 100644 arch/arm/configs/microchip_ksz9477_evb_bootstrap_mmc_defconfig
create mode 100644 arch/arm/dts/at91-microchip-ksz9477-evb-boot-bin.dts
create mode 100644 arch/arm/mach-at91/ddramc.c
create mode 100644 arch/arm/mach-at91/early_udelay.c
create mode 100644 arch/arm/mach-at91/include/mach/at91_ddrsdrc.h
create mode 100644 arch/arm/mach-at91/include/mach/at91_lowlevel_clock.h
create mode 100644 arch/arm/mach-at91/include/mach/ddramc.h
create mode 100644 arch/arm/mach-at91/include/mach/early_udelay.h
create mode 100644 arch/arm/mach-at91/lowlevel_clock.c
--
2.20.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2019-02-19 17:21 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-19 17:21 Ahmad Fatoum [this message]
2019-02-19 17:21 ` [PATCH v2 01/16] LICENSES: add BSD-1-Clause license Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 02/16] ARM: at91: import at91bootstrap's at91_ddrsdrc.h Ahmad Fatoum
2019-02-22 13:33 ` Roland Hieber
2019-02-26 9:04 ` Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 03/16] ARM: at91: migrate at91sam9_ddrsdr.h to use " Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 04/16] ARM: at91: replace at91sam9_ddrsdr.h with " Ahmad Fatoum
2019-02-20 9:07 ` Sascha Hauer
2019-02-19 17:21 ` [PATCH v2 05/16] ARM: at91: watchdog: implement at91_wdt_disable Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 06/16] ARM: at91: import lowlevel clock initialization from at91bootstrap Ahmad Fatoum
2019-02-20 9:11 ` Sascha Hauer
2019-02-19 17:21 ` [PATCH v2 07/16] ARM: at91: import early_udelay " Ahmad Fatoum
2019-02-20 9:20 ` Sascha Hauer
2019-02-20 9:23 ` Sascha Hauer
2019-02-19 17:21 ` [PATCH v2 08/16] ARM: at91: import low level DDRAMC initialization code " Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 09/16] ARM: at91: import lowlevel dbgu UART init " Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 10/16] images: at91: differentiate between first and second stage images Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 11/16] ARM: at91: sama5: specify 0x10000 as first stage max size Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 12/16] ARM: at91: microchip-ksz9477-evb: use compressed DTB Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 13/16] ARM: dts: microchip-ksz9477-evb: add dummy first stage device tree Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 14/16] ARM: at91: microchip-ksz9477-evb: implement first stage Ahmad Fatoum
2019-02-22 13:45 ` Roland Hieber
2019-02-26 9:05 ` Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 15/16] ARM: at91: microchip-ksz9477: provide board code fallback Ahmad Fatoum
2019-02-20 9:27 ` Sascha Hauer
2019-02-19 17:21 ` [PATCH v2 16/16] doc: microchip-ksz9477-evb: add documentation Ahmad Fatoum
2019-02-24 12:42 ` [PATCH v2 00/16] ARM: at91: microchip-kz9477-evb: support first stage boot Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190219172150.11901-1-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox