From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH v2 11/16] ARM: at91: sama5: specify 0x10000 as first stage max size
Date: Tue, 19 Feb 2019 18:21:45 +0100 [thread overview]
Message-ID: <20190219172150.11901-12-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20190219172150.11901-1-a.fatoum@pengutronix.de>
The ROM code on the sama5d{2,3,4} imposes a 64K limit on the bootloader
binary it loads to SRAM. Declare this in the mach-at91/Kconfig, so
it will always be checked against.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
arch/arm/mach-at91/Kconfig | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index a5e55e3cc451..0c012daf424d 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -224,6 +224,12 @@ config ARCH_BAREBOX_MAX_BARE_INIT_SIZE
default 0x6000 if ARCH_SAMA5D3
default 0xffffffff
+config ARCH_BAREBOX_MAX_IMAGE_SIZE
+ hex
+ depends on AT91_LOAD_BAREBOX_SRAM
+ default 0x10000 if SOC_SAMA5
+ default 0xffffffff
+
config SUPPORT_CALAO_DAB_MMX
bool
--
2.20.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2019-02-19 17:21 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-19 17:21 [PATCH v2 00/16] ARM: at91: microchip-kz9477-evb: support first stage boot Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 01/16] LICENSES: add BSD-1-Clause license Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 02/16] ARM: at91: import at91bootstrap's at91_ddrsdrc.h Ahmad Fatoum
2019-02-22 13:33 ` Roland Hieber
2019-02-26 9:04 ` Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 03/16] ARM: at91: migrate at91sam9_ddrsdr.h to use " Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 04/16] ARM: at91: replace at91sam9_ddrsdr.h with " Ahmad Fatoum
2019-02-20 9:07 ` Sascha Hauer
2019-02-19 17:21 ` [PATCH v2 05/16] ARM: at91: watchdog: implement at91_wdt_disable Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 06/16] ARM: at91: import lowlevel clock initialization from at91bootstrap Ahmad Fatoum
2019-02-20 9:11 ` Sascha Hauer
2019-02-19 17:21 ` [PATCH v2 07/16] ARM: at91: import early_udelay " Ahmad Fatoum
2019-02-20 9:20 ` Sascha Hauer
2019-02-20 9:23 ` Sascha Hauer
2019-02-19 17:21 ` [PATCH v2 08/16] ARM: at91: import low level DDRAMC initialization code " Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 09/16] ARM: at91: import lowlevel dbgu UART init " Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 10/16] images: at91: differentiate between first and second stage images Ahmad Fatoum
2019-02-19 17:21 ` Ahmad Fatoum [this message]
2019-02-19 17:21 ` [PATCH v2 12/16] ARM: at91: microchip-ksz9477-evb: use compressed DTB Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 13/16] ARM: dts: microchip-ksz9477-evb: add dummy first stage device tree Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 14/16] ARM: at91: microchip-ksz9477-evb: implement first stage Ahmad Fatoum
2019-02-22 13:45 ` Roland Hieber
2019-02-26 9:05 ` Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 15/16] ARM: at91: microchip-ksz9477: provide board code fallback Ahmad Fatoum
2019-02-20 9:27 ` Sascha Hauer
2019-02-19 17:21 ` [PATCH v2 16/16] doc: microchip-ksz9477-evb: add documentation Ahmad Fatoum
2019-02-24 12:42 ` [PATCH v2 00/16] ARM: at91: microchip-kz9477-evb: support first stage boot Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190219172150.11901-12-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox