From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 1/7] PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQ
Date: Tue, 26 Feb 2019 19:16:51 -0800 [thread overview]
Message-ID: <20190227031657.19896-2-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20190227031657.19896-1-andrew.smirnov@gmail.com>
Port of a Linux commit 29d6b80bc36be62ae38ed8ac3f7a426975fe7dfa
The PCIe IP block has an additional clock, "pcie_aux", that needs to
be controlled by the driver. Add code to support it.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "A.s. Dong" <aisheng.dong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: linux-imx@nxp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/pci/pci-imx6.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/pci/pci-imx6.c b/drivers/pci/pci-imx6.c
index 138b4ca8b..85307bad3 100644
--- a/drivers/pci/pci-imx6.c
+++ b/drivers/pci/pci-imx6.c
@@ -65,6 +65,7 @@ struct imx6_pcie {
struct clk *pcie_bus;
struct clk *pcie_phy;
struct clk *pcie;
+ struct clk *pcie_aux;
void __iomem *iomuxc_gpr;
u32 controller_id;
struct reset_control *pciephy_reset;
@@ -299,8 +300,10 @@ static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
{
+ struct device_d *dev = imx6_pcie->pci->dev;
u32 gpr1, gpr1x;
unsigned int offset;
+ int ret;
switch (imx6_pcie->drvdata->variant) {
case IMX6QP:
@@ -323,6 +326,12 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
case IMX7D:
break;
case IMX8MQ:
+ ret = clk_enable(imx6_pcie->pcie_aux);
+ if (ret) {
+ dev_err(dev, "unable to enable pcie_aux clock\n");
+ return ret;
+ }
+
offset = imx6_pcie_grp_offset(imx6_pcie);
/*
* Set the over ride low and enabled
@@ -742,6 +751,13 @@ static int imx6_pcie_probe(struct device_d *dev)
if (iores->start == IMX8MQ_PCIE2_BASE_ADDR)
imx6_pcie->controller_id = 1;
+ imx6_pcie->pcie_aux = clk_get(dev, "pcie_aux");
+ if (IS_ERR(imx6_pcie->pcie_aux)) {
+ dev_err(dev,
+ "pcie_aux clock source missing or invalid\n");
+ return PTR_ERR(imx6_pcie->pcie_aux);
+ }
+
goto imx7d_init;
case IMX7D:
imx6_pcie->iomuxc_gpr = IOMEM(MX7_IOMUXC_GPR_BASE_ADDR);
--
2.20.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2019-02-27 3:17 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-27 3:16 [PATCH 0/7] i.MX8MQ PCIe/USB DT changes Andrey Smirnov
2019-02-27 3:16 ` Andrey Smirnov [this message]
2019-02-27 3:16 ` [PATCH 2/7] ARM: imx8mq: Add node for SRC IP block Andrey Smirnov
2019-02-27 3:16 ` [PATCH 3/7] ARM: imx8mq: Add node for GPC " Andrey Smirnov
2019-02-27 3:16 ` [PATCH 4/7] ARM: imx8mq: Add nodes for PCIE1 and PCIE2 IP blocks Andrey Smirnov
2019-02-27 3:16 ` [PATCH 5/7] ARM: imx8mq-zii-ultra: Enable PCIE1 and PCIE2 Andrey Smirnov
2019-02-27 11:18 ` Lucas Stach
2019-02-28 2:42 ` Andrey Smirnov
2019-02-27 3:16 ` [PATCH 6/7] ARM: dts: imx8mq: Add nodes for USB IP blocks Andrey Smirnov
2019-02-27 3:16 ` [PATCH 7/7] ARM: imx8mq-zii-ultra: Add USB related nodes Andrey Smirnov
2019-02-27 11:10 ` Lucas Stach
2019-02-28 2:43 ` Andrey Smirnov
2019-02-27 7:43 ` [PATCH 0/7] i.MX8MQ PCIe/USB DT changes Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190227031657.19896-2-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox