* v2019.03.0
@ 2019-03-07 7:55 Sascha Hauer
0 siblings, 0 replies; only message in thread
From: Sascha Hauer @ 2019-03-07 7:55 UTC (permalink / raw)
To: Barebox List
Hi All,
barebox-2019.03.0 is out. No new shiny generic features around this
time, but some SoC specific improvements. The Rasperry Pi port now
supports the miniuart, so we do not need any hacks in the dt anymore.
The i.MX PCI support has been extended to i.MX7 and i.MX8M. Also, the
AT91 devicetree port now support the new PMC bindings which means
barebox now works properly again with the kernel provided dts files.
As usual, many fixes and cleanups went in, see below.
Sascha
----------------------------------------------------------------
Ahmad Fatoum (2):
regmap: Implement syscon_regmap_lookup_by_compatible()
clk: at91: add dt-compat to PMC bindings
Alexander Shiyan (14):
ARN: Remove duplicate includes
ARN: boards: Remove duplicate includes
ARN: boards: Remove duplicate includes
treewide: Remove trailing whitespaces and tabs
ARM: qemu-virt64: Remove orphan Kconfig
ARM: omap: Remove reference to non-existent HAVE_DEFAULT_ENVIRONMENT_NEW symbol
ARM: mvebu: delete unused mach/kirkwood.h
ARM: omap: delete unused mach/am33xx-devices.h
ARM: imx: delete unused mach/clock-imx1.h
ARM: mvebu: delete unused mach/dove.h
PPC: delete unused asm/e300.h
PPC: delete unused asm/mc146818rtc.h
ARM: at91: delete unused mach/sama5d3_matrix.h
ARM: netx: delete unused netx-devices.h
Andrey Smirnov (115):
treewide: Introduce MAP_FAILED and replace ad-hoc constants with it
crypto: digest: Remove unused variable
crypto: digest: Replace 4096 with PAGE_SIZE
crypto: digest: Split memory vs. file code into separate functions
commands: digest: Use MAX_LFS_FILESIZE instead of ~0
crypto: digest: Change the signature of digest_file_window()
PCI: Switch to using %pa to print memory addresses
PCI: Replace magic number in setup_device()
PCI: Remove superfluous parens in setup_device()
PCI: Simplify resource setup code in setup_device()
PCI: Store and reuse BAR offsets
PCI: Remove unused variables/code
PCI: Make pci_scan_bus static
PCI: Drop "slots" from struct pci_bus
PCI: Drop "resources" from struct pci_bus
PCI: Drop "name" from struct pci_bus
PCI: Drop "ops" from struct pci_bus
PCI: Drop "rom_address" from struct pci_dev
PCI: Simplify alloc_pci_dev()
PCI: Assume 1:1 mapping if .res_start callback is NULL
PCI: Convert ->res_start() to return resource_size_t
PCI: Consify pci_ops in struct pci_controller
crypto: digest: Return -errno if open() fails
crypto: digest: Return -errno if lseek() fails
crypto: digest: Return -errno if stat() fails
regulator: Convert drivers to use struct regulator_desc
regulator: Port basic regmap regulator functions
regulator: Add support for setting regulator's voltage
base: driver: Drop redundant list_empty() check
regulator: Assume probe deferral instead of missing regulator
regulator: Port ANATOP driver from Linux
drivers: base: Port power management code from Linux
soc: imx: Add GPCv2 power gating driver
reset: Add i.MX7 SRC reset driver
reset: Mark local functions as static
PCI: imx6: Add code to support i.MX7D
PCI: imx6: Allow probe deferral by reset GPIO
PCI: imx6: Do not wait for speed change on i.MX7
PCI: imx6: Do not switch speed if Gen2 is disabled
PCI: imx6: Fix spelling mistake: "contol" -> "control"
PCI: imx6: Drop unnecessary root_bus_nr setting
PCI: imx6: Port imx6_pcie_ltssm_enable()
block: Alias block_op_close() to block_op_flush()
block: Replace debug() with dev_dbg()
ARM: mmu: Drop custom virt_to_phys/phys_to_virt
ARM: mmu: Simplify the use of dma_inv_range()
ARM: mmu: Share code for dma_(un)map_single()
lib: strtox: Use plumbing from kstrtox.c
ARM64: mmu: Use arch_remap_range() internally
ARM64: mmu: Merge create_sections() and map_region() together
ARM: mmu: Share code for dma_free_coherent()
ARM64: mmu: Invalidate memory before remapping as DMA coherent
ARM: mmu: Share code for dma_alloc_coherent()
ARM: mmu: Share code for dma_sync_single_for_cpu()
ARM: mmu: Share sanity checking code in mmu_init()
ARM: mmu: Share code for arm_mmu_not_initialized_error()
ARM: mmu: Make sure DMA coherent memory is zeroed out
block: Do not write past block device boundary during a flush
block: Move shared code in get_chunk() out of if statement
ls: Adjust amount of space allocated for filesize
unlink_recursive: Drop struct data
lib: image-sparse: Mark sparse_seek() as static
commands: Move mem_parse_options() to lib/misc.c
commands: Get rid of mem_rw_buf
commands: Move /dev/mem driver to drivers/misc
nvmem: Do not use DEVFS_IS_CHARACTER_DEV
common: firmware: Don't use FILE_SIZE_STREAM directly
devfs: Fix incorrect error check for cdev->ops->lseek()
fs: Update FILE position in lseek()
fs: Drop trivial .lseek() implementaitons in FS drivers
devfs: Drop dev_lseek_default()
fs: devfs: Change .lseek callbacks to return 'int'
fs: Do not use IS_ERR_VALUE() to validate offset in lseek()
fs: Simplify new position calculation in lseek()
fs: Avoid division in memcpy_sz()
libfile: Fix incorrect lseek check in open_and_lseek()
fs: Share code between mem_write()/mem_read()
Documentation: i.MX: Increase :maxdepth: for board documentation
ARM: i.MX8MQ: bbu: Add MMC boot handler
ARM: Select HAS_DMA for AArch64
include: Import io-64-nonatomic-*.h from Linux
net/e1000: Don't use coherent memory for Rx buffer
net/e1000: Convert e1000_transmit to use dma_map_single()
net/e1000: Fix debug print warning
net/e1000: Fix incorrect "Rx ready" check
net/e1000: Get rid of pointer arithmetic in e1000_poll
net/e1000: Improve Rx descriptor handling in e1000_poll()
net/e1000: Remove pointer arithmetic in e1000_transmit()
net/e1000: Improve Tx descriptor handling in e1000_transmit
net/e1000: Make use of readl_poll_timeout() in e1000_transmit()
net/e1000: Rename fill_rx() to e1000_fill_rx()
net/e1000: Remove pointer arithmetic from e1000_fill_rx()
net/e1000: Consolidate next index calculation code
net/e1000: Improve RX buffer handling in e1000_fill_rx()
net/e1000: Do not hardcode TDBAH and RDBAH to 0
ARM: i.MX: Add support for ZII i.MX8MQ based devices
PCI: dwc: Fix pointer width cast problem
ARM: aarch64: Add PCI fixups section to linker script
soc: imx: gpcv2: use A_CORE instread of A7 for more i.MX platforms
soc: imx: gpcv2: make pgc driver more generic for other i.MX platforms
soc: imx: gpcv2: Switch to SPDX identifier
soc: imx: gpcv2: prefix i.MX7 specific defines
soc: imx: gpcv2: add support for i.MX8MQ SoC
reset: Constify "ops" in struct reset_controller_dev
reset: imx7: Add plubming to support multiple IP variants
include: Import dt-bindings/reset/imx8mq-reset.h
reset: imx7: Add support for i.MX8MQ IP block variant
PCI: imx6: Introduce drvdata
PCI: imx6: Mark PHY functions as i.MX6 specific
PCI: imx6: Convert DIRECT_SPEED_CHANGE quirk code to use a flag
PCI: imx6: Add support for i.MX8MQ
ARM: i.MX8MQ: Invert the logic in imx8mq_cpu_revision()
ARM: i.MX8MQ: Read only ROM version major
ARM: i.MX8MQ: Add corner case for Rev 2.1 silicon
usb: imx: Do not disable VBUS on ehci_register()'s success
Antony Pavlov (5):
MIPS: asm/types.h: drop unused stuff
move umode_t typedef from asm/types.h to linux/types.h
MIPS: drop *_MULTI_BOARDS atavisms
ARM: zynq: fix "'IO_SPACE_LIMIT' redefined" warning
nvmem: eeprom_93xx46: fix whitespaces
Christian Hemp (1):
Documentation: imx8mq-evk: fix firmware path
Enrico Jorns (8):
doc: bootchooser: fix typos etc.
doc: bootchooser: explicitly note configuration vs. storage backend
doc: bootchooser: be more explicit what bootchooser.state_prefix is for
doc: bootchooser: be more explicit about attempts reset on successful boot
doc: bootchooser: note how to actually start the bootchooser
doc: bootchooser: be more explicit about when the bootchooser terminates
doc: bootchooser: add details about bootchooser.reset_attempts handling
doc: bootchooser: add retry handling to algorithm description
Ian Abbott (1):
net: designware: drop bad RX frames
Lucas Stach (6):
Documentation: imx8mq-evk: point to current version of the firmware
Documentation: imx8mq-evk: add instructions for HDMITX firmware
firmware: imx: remove prebuilt ATF binary
firmware: add a note about license implications
firmware: drop the imx subdir
net: fec_imx: skip fec_halt if the FEC wasn't started
Marco Felsch (2):
memory: of_fixup: adapt to new memory layout
net: phy: micrel: backport ksz9031 125MHz ref-clk workaround
Masahiro Yamada (4):
kconfig: remove unused zconf.hash.c
kbuild: cherry-pick changes from Linux v5.0-rc3
scripts: fixdep: update to v5.0-rc3
kconfig.h: update to v4.16-rc2
Michael Olbrich (1):
i.MX habv3: add missing includes and make locally used function static
Moritz Augsburger (1):
ARM: rpi: complete new revision scheme
Oleksij Rempel (3):
MIPS: tplink-mr3020: use ar9331_pbl_generic_start
MIPS: black-swift: use ar9331_pbl_generic_start
MIPS: ath79: add spi and sram bootstrap helpers
Robert Karszniewicz (1):
readline: add ctrl-u (unix-line-discard)
Roland Hieber (5):
Documentation: state: fix closing brace without opening brace
Documentation: i.MX: Kindle 4/5: fix sphinx warnings
ubi: prevent null pointer reference
ARM: rpi: make locally used functions static
mci: bcm2835: make locally used functions static
Rouven Czerwinski (9):
ARM: rpi: fix typo in rpi-common.c
ARM: rpi: move clks into board specific rpi-common
ARM: rpi: retrieve miniuart clock from firmware
serial_ns16550: handle default reg-io-width
serial_ns16550: add raspberry pi compatible and init
ARM: rpi: add NS16550 support
ARM: rpi: choose miniuart as stdout
doc: bcm283x: remove miniuart overlay instruction
ARM: rpi: use defines for uart bases
Sam Ravnborg (9):
arm: at91: fix at91_configure_usart6 warning
clocksource: Do not mix depends and select for ATMEL_PIT
arm: at91: add SOC_SAMA5{D2,D3,D4}
clk: at91: add at91sam9260
clk: at91: add at91sam9rl
clk: at91: add at91sam9x5
clk: at91: add sama5d2
clk: at91: add sama5d4
clk: at91: update to PMC bindings
Sascha Hauer (42):
ARM: Makefile: Drop unnecessary imxcfg-y settings
mtd: peb: Add function to skip bad blocks
usb: fastboot: ubiformat: Fix bad block handling
ARM: omap: Wago PFC200: Initialize switch registers
fs: let truncate take a loff_t argument
fs: set errno in ftruncate()
fs: do not call truncate for FILE_SIZE_STREAM sized files
fs: devfs: forbid truncation when cdev has no truncate operation
misc: fix /dev/mem size
mci: imx-esdhc: Do not reset twice
mci: imx-esdhc: use dev_id
mci: imx-esdhc: move platform_data
mci: imx-esdhc: make clkidx configurable
mci: imx-esdhc: remove unnecessary include
net: Phy: Update phy interface modes from Linux
mci: imx-esdhc: implement static inline io wrappers
mci: imx-esdhc: Add bigendian register access support
scripts: imx-image: Be more informative on open errors
scripts: imx-image: make read_file behaviour consistent
dts: update to v5.0-rc3
dts: update to v5.0-rc4
dts: update to v5.0-rc5
dts: update to v5.0-rc6
mci: imx-esdhc: Add layerscape support
Merge branch 'for-next/arm'
Merge branch 'for-next/arm-mmu'
Merge branch 'for-next/digest'
Merge branch 'for-next/dts'
Merge branch 'for-next/e1000'
Merge branch 'for-next/imx'
Merge branch 'for-next/kbuild'
Merge branch 'for-next/lseek'
Merge branch 'for-next/mips'
Merge branch 'for-next/misc'
Merge branch 'for-next/mmc-esdhc'
Merge branch 'for-next/nfs'
Merge branch 'for-next/pci'
Merge branch 'for-next/rpi'
kbuild: Add missing semicolon
defaultenv: Fix dependencies
Merge branch 'for-next/at91-pmc-clk'
Release v2019.03.0
Thomas Haemmerle (1):
ARM: zynqmp: select macb driver
Ulrich Ölmann (9):
common: state: fix typo
state: Documentation: fix typo
common: state: fix compiler warnings about wrong type conversion in messages
common: state: fix formatting of "off_t" variables
common: state: fix formatting of "uint32_t" variables
common: state: harmonize code with dt-utils
common: state: harmonize code with dt-utils
common: state: harmonize code with dt-utils
common: state: harmonize code with dt-utils
Uwe Kleine-König (7):
ARM: imx: add support for Udoo Neo full
fs/nfs: don't try to set nfs error code from mount rpc call
fs/nfs: copy data from rpc replies to local storage
fs/nfs: stop using a global variable for nfs packet payload
gen-dtb-s: annotate magic values with their meaning
i2c_probe: limit slave addresses to [0x04, 0x77]
i2c_probe: Use a quick write transfer instead of writing a zero
Vivien Didelot (5):
defaultenv-2: trigger DHCP before booting 'net'
defaultenv-2: centralize nfs commands for 'net'
boot: make it a little bit less verbose
ARM: zii-vf610-dev: fix boot from SD
ARM: zii-vf610-dev: boot initrd from SD
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2019-03-07 7:55 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-07 7:55 v2019.03.0 Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox