From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 07/14] clk: divider: Support CLK_DIVIDER_READ_ONLY flag
Date: Mon, 11 Mar 2019 10:31:16 +0100 [thread overview]
Message-ID: <20190311093123.7956-8-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20190311093123.7956-1-s.hauer@pengutronix.de>
To support a readonly divider add the CLK_DIVIDER_READ_ONLY flag.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/clk/clk-divider.c | 7 +++++++
drivers/clk/rockchip/clk-rk3188.c | 1 -
drivers/clk/rockchip/clk-rk3288.c | 1 -
include/linux/clk.h | 1 +
4 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 407aae78ea..d9d3407e75 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -203,8 +203,12 @@ static int clk_divider_bestdiv(struct clk *clk, unsigned long rate,
static long clk_divider_round_rate(struct clk *clk, unsigned long rate,
unsigned long *parent_rate)
{
+ struct clk_divider *divider = container_of(clk, struct clk_divider, clk);
int div;
+ if (divider->flags & CLK_DIVIDER_READ_ONLY)
+ return clk_divider_recalc_rate(clk, *parent_rate);
+
div = clk_divider_bestdiv(clk, rate, parent_rate);
return *parent_rate / div;
@@ -217,6 +221,9 @@ static int clk_divider_set_rate(struct clk *clk, unsigned long rate,
unsigned int div, value;
u32 val;
+ if (divider->flags & CLK_DIVIDER_READ_ONLY)
+ return 0;
+
if (clk->flags & CLK_SET_RATE_PARENT) {
unsigned long best_parent_rate = parent_rate;
div = clk_divider_bestdiv(clk, rate, &best_parent_rate);
diff --git a/drivers/clk/rockchip/clk-rk3188.c b/drivers/clk/rockchip/clk-rk3188.c
index 7dda2963e3..8ed3a6d894 100644
--- a/drivers/clk/rockchip/clk-rk3188.c
+++ b/drivers/clk/rockchip/clk-rk3188.c
@@ -26,7 +26,6 @@
#define RK3188_GRF_SOC_STATUS 0xac
#define CLK_SET_RATE_NO_REPARENT 0
-#define CLK_DIVIDER_READ_ONLY 0
enum rk3188_plls {
apll, cpll, dpll, gpll,
diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index bb111e1e0b..e7cc9c1b5b 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -26,7 +26,6 @@
#define RK3288_GRF_SOC_STATUS1 0x284
#define CLK_SET_RATE_NO_REPARENT 0
-#define CLK_DIVIDER_READ_ONLY 0
enum rk3288_plls {
apll, dpll, cpll, gpll, npll,
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 65d163c78d..2de963e7e9 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -341,6 +341,7 @@ struct clk_divider {
#define CLK_DIVIDER_POWER_OF_TWO (1 << 1)
#define CLK_DIVIDER_HIWORD_MASK (1 << 3)
+#define CLK_DIVIDER_READ_ONLY (1 << 5)
#define CLK_MUX_HIWORD_MASK (1 << 2)
--
2.20.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2019-03-11 9:31 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-11 9:31 [PATCH 00/14] Add initial STMicroelectronics MP1 support Sascha Hauer
2019-03-11 9:31 ` [PATCH 01/14] clk: clk-composite: return parent_rate if no rate clk Sascha Hauer
2019-03-11 9:31 ` [PATCH 02/14] clk: parent_names should be const Sascha Hauer
2019-03-11 9:31 ` [PATCH 03/14] clk: export clk_gate_is_enabled() Sascha Hauer
2019-03-11 9:31 ` [PATCH 04/14] clk: Make CLK_IGNORE_UNUSED generic Sascha Hauer
2019-03-11 9:31 ` [PATCH 05/14] clk: Support CLK_IS_CRITICAL flag Sascha Hauer
2019-03-11 9:31 ` [PATCH 06/14] clk: divider: pass divider flags Sascha Hauer
2019-03-11 9:31 ` Sascha Hauer [this message]
2019-03-11 9:31 ` [PATCH 08/14] clk: mux: Support mux specific flags Sascha Hauer
2019-03-11 9:31 ` [PATCH 09/14] clk: mux: Support CLK_MUX_READ_ONLY flag Sascha Hauer
2019-03-11 9:31 ` [PATCH 10/14] clk: mux: Support CLK_SET_RATE_NO_REPARENT flag Sascha Hauer
2019-03-11 9:31 ` [PATCH 11/14] ARM: stm32mp1: Add clk driver Sascha Hauer
2019-03-11 9:31 ` [PATCH 12/14] ARM: stm32mp1: Add serial driver Sascha Hauer
2019-03-11 9:31 ` [PATCH 13/14] clocksource: Enable architected timer support for CPU_V7 Sascha Hauer
2019-03-11 9:31 ` [PATCH 14/14] ARM: Add initial STM32MP1 support Sascha Hauer
2019-03-12 1:41 ` Andrey Smirnov
2019-03-13 8:35 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190311093123.7956-8-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox