From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mickerik.phytec.de ([195.145.39.210]) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1h3LBK-00019G-1S for barebox@lists.infradead.org; Mon, 11 Mar 2019 13:41:32 +0000 From: David Brandt Date: Mon, 11 Mar 2019 14:41:25 +0100 Message-Id: <20190311134125.10946-1-d.brandt@phytec.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH] commands: bootaux: New command bootaux for iMX To: barebox@lists.infradead.org This patch adds the bootaux command which starts auxiliary cores of iMX processors, currently only for iMX8MQ. This is based on the u-boot-imx command and shares the behaviour. The currently unnecessary parameter for the core to start is necessary for the iMX8QM and other processors having multiple auxiliary cores. Signed-off-by: David Brandt --- arch/arm/mach-imx/imx8mq.c | 37 +++++++++++++++ arch/arm/mach-imx/include/mach/generic.h | 4 ++ commands/Kconfig | 14 ++++++ commands/Makefile | 1 + commands/bootaux.c | 58 ++++++++++++++++++++++++ 5 files changed, 114 insertions(+) create mode 100644 commands/bootaux.c diff --git a/arch/arm/mach-imx/imx8mq.c b/arch/arm/mach-imx/imx8mq.c index 3f6b433a5..9e60a8bd7 100644 --- a/arch/arm/mach-imx/imx8mq.c +++ b/arch/arm/mach-imx/imx8mq.c @@ -123,4 +123,41 @@ static int imx8mq_report_hdmi_firmware(void) return 0; } + +#ifdef CONFIG_CMD_BOOTAUX + +#define FSL_SIP_SRC 0xC2000005 +#define FSL_SIP_SRC_M4_START 0x00 +#define FSL_SIP_SRC_M4_STARTED 0x01 +int imx_auxiliary_core_up(u32 core_id, ulong boot_private_data) +{ + u32 stack, pc; + struct arm_smccc_res res; + + if (!boot_private_data) + return -EINVAL; + + stack = *(u32 *)boot_private_data; + pc = *(u32 *)(boot_private_data + 4); + + /* Set the stack and pc to M4 bootROM */ + writel(stack, MX8MQ_M4_BOOTROM_BASE_ADDR); + writel(pc, MX8MQ_M4_BOOTROM_BASE_ADDR + 4); + + /* Enable M4 */ + arm_smccc_smc(FSL_SIP_SRC, FSL_SIP_SRC_M4_START, + 0, 0, 0, 0, 0, 0, &res); + + return res.a0; +} + +int imx_auxiliary_core_check_up(u32 core_id) +{ + struct arm_smccc_res res; + arm_smccc_smc(FSL_SIP_SRC, FSL_SIP_SRC_M4_STARTED, + 0, 0, 0, 0, 0, 0, &res); + return res.a0; +} +#endif + console_initcall(imx8mq_report_hdmi_firmware); diff --git a/arch/arm/mach-imx/include/mach/generic.h b/arch/arm/mach-imx/include/mach/generic.h index be58da4da..59fcbc767 100644 --- a/arch/arm/mach-imx/include/mach/generic.h +++ b/arch/arm/mach-imx/include/mach/generic.h @@ -59,6 +59,10 @@ void imx6ul_cpu_lowlevel_init(void); void imx7_cpu_lowlevel_init(void); void vf610_cpu_lowlevel_init(void); +/* processor specific functions to boot auxiliary core */ +int imx_auxiliary_core_up(u32 core_id, ulong boot_private_data); +int imx_auxiliary_core_check_up(u32 core_id); + /* There's a off-by-one betweem the gpio bank number and the gpiochip */ /* range e.g. GPIO_1_5 is gpio 5 under linux */ #define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr)) diff --git a/commands/Kconfig b/commands/Kconfig index 4f5d84ac1..c39a84f23 100644 --- a/commands/Kconfig +++ b/commands/Kconfig @@ -270,6 +270,20 @@ config CMD_AT91_BOOT_TEST -j ADDR jump address -s SRAM SRAM device (default /dev/sram0) +config CMD_BOOTAUX + tristate + default y + depends on ARCH_IMX8MQ + prompt "bootaux" + help + Boot auxiliary core on NXP iMXP Processors. + + Usage: bootaux ADDRESS [CORE] + + Options: + ADDRESS load address + CORE auxiliary core to start, defaults to 0 + config CMD_BOOT_ORDER tristate depends on ARCH_OMAP4 diff --git a/commands/Makefile b/commands/Makefile index 358671bb5..c72b52c27 100644 --- a/commands/Makefile +++ b/commands/Makefile @@ -1,6 +1,7 @@ obj-$(CONFIG_STDDEV) += stddev.o obj-$(CONFIG_CMD_DIGEST) += digest.o obj-$(CONFIG_COMPILE_HASH) += hashsum.o +obj-$(CONFIG_CMD_BOOTAUX) += bootaux.o obj-$(CONFIG_CMD_BOOTM) += bootm.o obj-$(CONFIG_CMD_UIMAGE) += uimage.o obj-$(CONFIG_CMD_LINUX16) += linux16.o diff --git a/commands/bootaux.c b/commands/bootaux.c new file mode 100644 index 000000000..62209bf3e --- /dev/null +++ b/commands/bootaux.c @@ -0,0 +1,58 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * bootaux - boot auxiliary core + * + * Copyright (C) 2019 David Brandt + * + * Based on code from u-boot-imx from Freescale Semiconductor, Inc. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int do_bootaux(int argc, char *argv[]) +{ + ulong addr; + int ret, up; + u32 core = 0; + + if (argc < 2) { + printf("no load address given\n"); + return 1; + } + + if (argc > 2) + core = strict_strtoul(argv[2], NULL, 10); + + up = imx_auxiliary_core_check_up(core); + if (up) { + printf("Auxiliary core %d is already up\n", core); + return 0; + } + + addr = strict_strtoul(argv[1], NULL, 16); + + printf("Starting auxiliary core %d at 0x%08lX ...\n", core, addr); + + ret = imx_auxiliary_core_up(core, addr); + if (ret) + return 1; + + return 0; +} + + +BAREBOX_CMD_START(bootaux) + .cmd = do_bootaux, + BAREBOX_CMD_DESC("boot auxiliary core") + BAREBOX_CMD_OPTS("ADDR [CORE]") + BAREBOX_CMD_GROUP(CMD_GRP_BOOT) +BAREBOX_CMD_END -- 2.17.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox