From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by casper.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1h40Oj-0001Xv-Pp for barebox@lists.infradead.org; Wed, 13 Mar 2019 09:42:11 +0000 From: Sascha Hauer Date: Wed, 13 Mar 2019 10:42:00 +0100 Message-Id: <20190313094202.14901-14-s.hauer@pengutronix.de> In-Reply-To: <20190313094202.14901-1-s.hauer@pengutronix.de> References: <20190313094202.14901-1-s.hauer@pengutronix.de> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 13/15] ARM: Layerscape: Add LS1046a RDB board support To: Barebox List The RDB is the Freescale LS1046a reference board. This patch adds support for it. Currently supported: - DDR4 RAM as read from SPD EEPROM - UART - SD/MMC - RGMII network ports The Serdes ports are currently not supported. Signed-off-by: Sascha Hauer --- arch/arm/boards/Makefile | 1 + arch/arm/boards/ls1046ardb/Makefile | 4 + arch/arm/boards/ls1046ardb/board.c | 36 +++ .../defaultenv-ls1046ardb/nv/dev.eth4.mode | 1 + .../defaultenv-ls1046ardb/nv/dev.eth5.mode | 1 + .../defaultenv-ls1046ardb/nv/dev.eth6.mode | 1 + .../defaultenv-ls1046ardb/nv/dev.eth7.mode | 1 + arch/arm/boards/ls1046ardb/lowlevel.c | 231 ++++++++++++++++++ arch/arm/boards/ls1046ardb/ls1046ardb_pbi.cfg | 22 ++ .../boards/ls1046ardb/ls1046ardb_qspi_pbi.cfg | 26 ++ .../boards/ls1046ardb/ls1046ardb_rcw_emmc.cfg | 7 + .../boards/ls1046ardb/ls1046ardb_rcw_qspi.cfg | 7 + .../boards/ls1046ardb/ls1046ardb_rcw_sd.cfg | 7 + arch/arm/boards/ls1046ardb/start.S | 11 + arch/arm/dts/Makefile | 1 + arch/arm/dts/fsl-ls1046a-rdb.dts | 98 ++++++++ arch/arm/mach-layerscape/Kconfig | 9 + images/Makefile.layerscape | 23 +- 18 files changed, 485 insertions(+), 2 deletions(-) create mode 100644 arch/arm/boards/ls1046ardb/Makefile create mode 100644 arch/arm/boards/ls1046ardb/board.c create mode 100644 arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth4.mode create mode 100644 arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth5.mode create mode 100644 arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth6.mode create mode 100644 arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth7.mode create mode 100644 arch/arm/boards/ls1046ardb/lowlevel.c create mode 100644 arch/arm/boards/ls1046ardb/ls1046ardb_pbi.cfg create mode 100644 arch/arm/boards/ls1046ardb/ls1046ardb_qspi_pbi.cfg create mode 100644 arch/arm/boards/ls1046ardb/ls1046ardb_rcw_emmc.cfg create mode 100644 arch/arm/boards/ls1046ardb/ls1046ardb_rcw_qspi.cfg create mode 100644 arch/arm/boards/ls1046ardb/ls1046ardb_rcw_sd.cfg create mode 100644 arch/arm/boards/ls1046ardb/start.S create mode 100644 arch/arm/dts/fsl-ls1046a-rdb.dts diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile index c5dc41526b..7d46e6b150 100644 --- a/arch/arm/boards/Makefile +++ b/arch/arm/boards/Makefile @@ -162,3 +162,4 @@ obj-$(CONFIG_MACH_ZII_IMX8MQ_DEV) += zii-imx8mq-dev/ obj-$(CONFIG_MACH_ZII_VF610_DEV) += zii-vf610-dev/ obj-$(CONFIG_MACH_ZII_IMX7D_RPU2) += zii-imx7d-rpu2/ obj-$(CONFIG_MACH_WAGO_PFC_AM35XX) += wago-pfc-am35xx/ +obj-$(CONFIG_MACH_LS1046ARDB) += ls1046ardb/ diff --git a/arch/arm/boards/ls1046ardb/Makefile b/arch/arm/boards/ls1046ardb/Makefile new file mode 100644 index 0000000000..03ac4ecca3 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/Makefile @@ -0,0 +1,4 @@ +lwl-y += lowlevel.o +obj-y += board.o +lwl-y += start.o +bbenv-y += defaultenv-ls1046ardb diff --git a/arch/arm/boards/ls1046ardb/board.c b/arch/arm/boards/ls1046ardb/board.c new file mode 100644 index 0000000000..483040957e --- /dev/null +++ b/arch/arm/boards/ls1046ardb/board.c @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include +#include +#include +#include +#include +#include +#include +#include + +static int rdb_mem_init(void) +{ + if (!of_machine_is_compatible("fsl,ls1046a-rdb")) + return 0; + + arm_add_mem_device("ram0", 0x80000000, 0x80000000); + arm_add_mem_device("ram1", 0x880000000, 3ULL * SZ_2G); + + printf("Current EL: %d\n", current_el()); + + return 0; +} +mem_initcall(rdb_mem_init); + +static int rdb_postcore_init(void) +{ + if (!of_machine_is_compatible("fsl,ls1046a-rdb")) + return 0; + + defaultenv_append_directory(defaultenv_ls1046ardb); + + return 0; +} + +postcore_initcall(rdb_postcore_init); diff --git a/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth4.mode b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth4.mode new file mode 100644 index 0000000000..7a68b11da8 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth4.mode @@ -0,0 +1 @@ +disabled diff --git a/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth5.mode b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth5.mode new file mode 100644 index 0000000000..7a68b11da8 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth5.mode @@ -0,0 +1 @@ +disabled diff --git a/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth6.mode b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth6.mode new file mode 100644 index 0000000000..7a68b11da8 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth6.mode @@ -0,0 +1 @@ +disabled diff --git a/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth7.mode b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth7.mode new file mode 100644 index 0000000000..7a68b11da8 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth7.mode @@ -0,0 +1 @@ +disabled diff --git a/arch/arm/boards/ls1046ardb/lowlevel.c b/arch/arm/boards/ls1046ardb/lowlevel.c new file mode 100644 index 0000000000..6de16063a7 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/lowlevel.c @@ -0,0 +1,231 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct board_specific_parameters { + u32 n_ranks; + u32 datarate_mhz_high; + u32 rank_gb; + u32 clk_adjust; + u32 wrlvl_start; + u32 wrlvl_ctl_2; + u32 wrlvl_ctl_3; +}; + +/* + * These tables contain all valid speeds we want to override with board + * specific parameters. datarate_mhz_high values need to be in ascending order + * for each n_ranks group. + */ +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 + */ + {2, 1350, 0, 8, 6, 0x0708090B, 0x0C0D0E09,}, + {2, 1666, 0, 8, 7, 0x08090A0C, 0x0D0F100B,}, + {2, 1900, 0, 8, 7, 0x09090B0D, 0x0E10120B,}, + {2, 2300, 0, 8, 9, 0x0A0B0C10, 0x1213140E,}, + {} +}; + +static const struct board_specific_parameters *udimms[] = { + udimm0, +}; + +static const struct board_specific_parameters rdimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 + */ + {2, 1666, 0, 0x8, 0x0D, 0x0C0B0A08, 0x0A0B0C08,}, + {2, 1900, 0, 0x8, 0x0E, 0x0D0C0B09, 0x0B0C0D09,}, + {2, 2300, 0, 0xa, 0x12, 0x100F0D0C, 0x0E0F100C,}, + {1, 1666, 0, 0x8, 0x0D, 0x0C0B0A08, 0x0A0B0C08,}, + {1, 1900, 0, 0x8, 0x0E, 0x0D0C0B09, 0x0B0C0D09,}, + {1, 2300, 0, 0xa, 0x12, 0x100F0D0C, 0x0E0F100C,}, + {} +}; + +static const struct board_specific_parameters *rdimms[] = { + rdimm0, +}; + +static void ddr_board_options(memctl_options_t *popts, + struct dimm_params *pdimm, + struct fsl_ddr_controller *c) +{ + const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; + unsigned long ddr_freq; + + if (!pdimm->n_ranks) + return; + + if (popts->registered_dimm_en) + pbsp = rdimms[0]; + else + pbsp = udimms[0]; + + /* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = c->ddr_freq / 1000000; + while (pbsp->datarate_mhz_high) { + if (pbsp->n_ranks == pdimm->n_ranks) { + if (ddr_freq <= pbsp->datarate_mhz_high) { + popts->clk_adjust = pbsp->clk_adjust; + popts->wrlvl_start = pbsp->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + goto found; + } + pbsp_highest = pbsp; + } + pbsp++; + } + + if (pbsp_highest) { + printf("Error: board specific timing not found for %lu MT/s\n", + ddr_freq); + printf("Trying to use the highest speed (%u) parameters\n", + pbsp_highest->datarate_mhz_high); + popts->clk_adjust = pbsp_highest->clk_adjust; + popts->wrlvl_start = pbsp_highest->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + } else { + panic("DIMM is not supported by this board"); + } +found: + debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n", + pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb); + + popts->data_bus_width = 0; /* 64-bit data bus */ + popts->bstopre = 0; /* enable auto precharge */ + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; + /* + * Write leveling override + */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + + /* + * Rtt and Rtt_WR override + */ + popts->rtt_override = 0; + + /* Enable ZQ calibration */ + popts->zq_en = 1; + + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR4_CDR_ODT_80ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR4_CDR_ODT_80ohm) | + DDR_CDR2_VREF_TRAIN_EN | DDR_CDR2_VREF_RANGE_2; + + /* optimize cpo for erratum A-009942 */ + popts->cpo_sample = 0x61; +} + +extern char __dtb_fsl_ls1046a_rdb_start[]; + +static struct spd_eeprom spd_eeprom[] = { + { + /* filled during runtime */ + }, +}; + +static struct dimm_params dimm_params[] = { + { + /* filled during runtime */ + }, +}; + +static struct fsl_ddr_controller ddrc[] = { + { + .dimm_slots_per_ctrl = ARRAY_SIZE(dimm_params), + .spd_installed_dimms = spd_eeprom, + .dimm_params = dimm_params, + .memctl_opts.ddrtype = SDRAM_TYPE_DDR4, + .base = IOMEM(LSCH2_DDR_ADDR), + .ddr_freq = LS1046A_DDR_FREQ, + .erratum_A008511 = 1, + .erratum_A009803 = 1, + .erratum_A010165 = 1, + .erratum_A009801 = 1, + .erratum_A009942 = 1, + .chip_selects_per_ctrl = 4, + .board_options = ddr_board_options, + }, +}; + +static struct fsl_ddr_info ls1046a_info = { + .num_ctrls = ARRAY_SIZE(ddrc), + .c = ddrc, +}; + +static noinline __noreturn void ls1046ardb_r_entry(unsigned long memsize) +{ + unsigned long membase = LS1046A_DDR_SDRAM_BASE; + struct fsl_i2c *i2c; + int ret; + + if (get_pc() >= membase) { + if (memsize + membase >= 0x100000000) + memsize = 0x100000000 - membase; + + barebox_arm_entry(membase, 0x80000000 - SZ_1M * 67, + __dtb_fsl_ls1046a_rdb_start); + } + + arm_cpu_lowlevel_init(); + debug_ll_init(); + ls1046a_init_lowlevel(); + + i2c = ls1046_i2c_init(IOMEM(LSCH2_I2C1_BASE_ADDR)); + ret = spd_read_eeprom(i2c, i2c_fsl_xfer, 0x51, &spd_eeprom); + if (ret) { + pr_err("Cannot read SPD EEPROM: %d\n", ret); + goto err; + } + + memsize = fsl_ddr_sdram(&ls1046a_info); + + ls1046a_errata_post_ddr(); + + ls1046a_esdhc_start_image(memsize, 0, 0); + +err: + pr_err("Booting failed\n"); + + while (1); +} + +void ls1046ardb_entry(unsigned long r0, unsigned long r1, unsigned long r2); + +__noreturn void ls1046ardb_entry(unsigned long r0, unsigned long r1, unsigned long r2) +{ + relocate_to_current_adr(); + setup_c(); + + ls1046ardb_r_entry(r0); +} diff --git a/arch/arm/boards/ls1046ardb/ls1046ardb_pbi.cfg b/arch/arm/boards/ls1046ardb/ls1046ardb_pbi.cfg new file mode 100644 index 0000000000..5478217524 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/ls1046ardb_pbi.cfg @@ -0,0 +1,22 @@ +#Configure Scratch register +09570600 00000000 +09570604 10000000 +#Disable CCI barrier tranaction +09570178 0000e010 +09180000 00000008 +#USB PHY frequency sel +09570418 0000009e +0957041c 0000009e +09570420 0000009e +#Serdes SATA +09eb1300 80104e20 +09eb08dc 00502880 +#PEX gen3 link +09570158 00000300 +89400890 01048000 +89500890 01048000 +89600890 01048000 +#Alt base register +09570158 00001000 +#flush PBI data +096100c0 000fffff diff --git a/arch/arm/boards/ls1046ardb/ls1046ardb_qspi_pbi.cfg b/arch/arm/boards/ls1046ardb/ls1046ardb_qspi_pbi.cfg new file mode 100644 index 0000000000..735d46c9f9 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/ls1046ardb_qspi_pbi.cfg @@ -0,0 +1,26 @@ +#QSPI clk +0957015c 40100000 +#Configure Scratch register +09570600 00000000 +09570604 10000000 +#Disable CCI barrier tranaction +09570178 0000e010 +09180000 00000008 +#USB PHY frequency sel +09570418 0000009e +0957041c 0000009e +09570420 0000009e +#Serdes SATA +09eb1300 80104e20 +09eb08dc 00502880 +#PEX gen3 link +09570158 00000300 +89400890 01048000 +89500890 01048000 +89600890 01048000 +#Alt base register +09570158 00001000 +#flush PBI data +096100c0 000fffff +#Change endianness +09550000 000f400c diff --git a/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_emmc.cfg b/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_emmc.cfg new file mode 100644 index 0000000000..ccedf87e84 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_emmc.cfg @@ -0,0 +1,7 @@ +#PBL preamble and RCW header +aa55aa55 01ee0100 +# RCW +0c150012 0e000000 00000000 00000000 +11335559 40000012 60040000 c1000000 +00000000 00000000 00000000 00238800 +20124000 00003000 00000096 00000001 diff --git a/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_qspi.cfg b/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_qspi.cfg new file mode 100644 index 0000000000..7b9be0ad3f --- /dev/null +++ b/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_qspi.cfg @@ -0,0 +1,7 @@ +#PBL preamble and RCW header +aa55aa55 01ee0100 +# RCW +0c150010 0e000000 00000000 00000000 +11335559 40005012 40025000 c1000000 +00000000 00000000 00000000 00238800 +20124000 00003101 00000096 00000001 diff --git a/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_sd.cfg b/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_sd.cfg new file mode 100644 index 0000000000..d3b152282f --- /dev/null +++ b/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_sd.cfg @@ -0,0 +1,7 @@ +#PBL preamble and RCW header +aa55aa55 01ee0100 +# RCW +0c150012 0e000000 00000000 00000000 +11335559 40005012 60040000 c1000000 +00000000 00000000 00000000 00238800 +20124000 00003101 00000096 00000001 diff --git a/arch/arm/boards/ls1046ardb/start.S b/arch/arm/boards/ls1046ardb/start.S new file mode 100644 index 0000000000..466782b278 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/start.S @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#include +#include + +#define STACK_TOP 0x10020000 + +ENTRY_PROC(start_ls1046ardb) + mov x3, #STACK_TOP + mov sp, x3 + b ls1046ardb_entry +ENTRY_PROC_END(start_ls1046ardb) diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index f989df6b0c..49067b4b27 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -131,5 +131,6 @@ pbl-dtb-$(CONFIG_MACH_XILINX_ZCU104) += zynqmp-zcu104-revA.dtb.o pbl-dtb-$(CONFIG_MACH_ZII_IMX7D_RPU2) += imx7d-zii-rpu2.dtb.o pbl-dtb-$(CONFIG_MACH_WAGO_PFC_AM35XX) += am35xx-pfc-750_820x.dtb.o +pbl-dtb-$(CONFIG_MACH_LS1046ARDB) += fsl-ls1046a-rdb.dtb.o clean-files := *.dtb *.dtb.S .*.dtc .*.pre .*.dts *.dtb.lzo diff --git a/arch/arm/dts/fsl-ls1046a-rdb.dts b/arch/arm/dts/fsl-ls1046a-rdb.dts new file mode 100644 index 0000000000..e16948bc8a --- /dev/null +++ b/arch/arm/dts/fsl-ls1046a-rdb.dts @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include + +/ { + chosen { + stdout-path = &duart0; + + environment { + compatible = "barebox,environment"; + device-path = &environment_sd; + }; + }; + + aliases { + mmc0 = &esdhc; + }; +}; + +&esdhc { + #address-cells = <1>; + #size-cells = <1>; + + environment_sd: partition@200000 { + label = "barebox-environment"; + reg = <0x200000 0x20000>; + }; +}; + +&fman0 { + ethernet@e0000 { + status = "disabled"; + }; + + ethernet@e2000 { + status = "disabled"; + }; + + ethernet@e4000 { + phy-mode = "rgmii-id"; + }; + + ethernet@e6000 { + phy-mode = "rgmii-id"; + }; + + ethernet@e8000 { + }; + + ethernet@ea000 { + }; + + ethernet@f0000 { + }; + + ethernet@f2000 { + }; + + mdio@fc000 { + }; + + mdio@fd000 { + }; + + mdio@e1000 { + status = "disabled"; + }; + + mdio@e3000 { + status = "disabled"; + }; + + mdio@e5000 { + status = "disabled"; + }; + + mdio@e7000 { + status = "disabled"; + }; + + mdio@e9000 { + status = "disabled"; + }; + + mdio@eb000 { + status = "disabled"; + }; + + mdio@f1000 { + status = "disabled"; + }; + + mdio@f3000 { + status = "disabled"; + }; +}; diff --git a/arch/arm/mach-layerscape/Kconfig b/arch/arm/mach-layerscape/Kconfig index 5117d4b914..bd93d03b66 100644 --- a/arch/arm/mach-layerscape/Kconfig +++ b/arch/arm/mach-layerscape/Kconfig @@ -5,4 +5,13 @@ config ARCH_LS1046 select SYS_SUPPORTS_64BIT_KERNEL bool +config MACH_LS1046ARDB + bool "QorIQ LS1046A Reference Design Board" + select ARCH_LS1046 + select DDR_SPD + select MCI_IMX_ESDHC_PBL + select I2C_IMX_EARLY + select DDR_FSL + select DDR_FSL_DDR4 + endif diff --git a/images/Makefile.layerscape b/images/Makefile.layerscape index 81838b404a..6523d42b8a 100644 --- a/images/Makefile.layerscape +++ b/images/Makefile.layerscape @@ -14,5 +14,24 @@ quiet_cmd_lspbl_image = LSPBL-IMG $@ $(objtree)/scripts/pblimage -o $@ -r $(lspbl-rcw-tmp) \ -m $($(patsubst $(obj)/%.pblb,PBL_CODE_SIZE_%,$<)) -p $(lspbl-pbi-tmp) -i $< -$(obj)/%.lspblimg: $(obj)/% FORCE - $(call if_changed,lspbl_image,$(RCW_$(@F)),$(PBI_$(@F)),) +pbl-$(CONFIG_MACH_LS1046ARDB) += start_ls1046ardb.pbl +$(obj)/barebox-ls1046ardb-2nd.image: $(obj)/start_ls1046ardb.pblb + $(call if_changed,shipped) + +$(obj)/barebox-ls1046ardb-sd.image: $(obj)/start_ls1046ardb.pblb \ + $(board)/ls1046ardb/ls1046ardb_rcw_sd.cfg \ + $(board)/ls1046ardb/ls1046ardb_pbi.cfg + $(call if_changed,lspbl_image) + +$(obj)/barebox-ls1046ardb-emmc.image: $(obj)/start_ls1046ardb.pblb \ + $(board)/ls1046ardb/ls1046ardb_rcw_emmc.cfg \ + $(board)/ls1046ardb/ls1046ardb_pbi.cfg + $(call if_changed,lspbl_image) + +$(obj)/barebox-ls1046ardb-qspi.image: $(obj)/start_ls1046ardb.pblb \ + $(board)/ls1046ardb/ls1046ardb_rcw_qspi.cfg \ + $(board)/ls1046ardb/ls1046ardb_pbi.cfg + $(call if_changed,lspbl_image) + +image-$(CONFIG_MACH_LS1046ARDB) += barebox-ls1046ardb-sd.image barebox-ls1046ardb-qspi.image \ + barebox-ls1046ardb-emmc.image barebox-ls1046ardb-2nd.image -- 2.20.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox