From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1h5n2z-0004XZ-Cx for barebox@lists.infradead.org; Mon, 18 Mar 2019 07:51:02 +0000 Date: Mon, 18 Mar 2019 08:50:57 +0100 From: Sascha Hauer Message-ID: <20190318075057.njsj3bes7wuteytc@pengutronix.de> References: <20190312102055.12386-1-m.tretter@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20190312102055.12386-1-m.tretter@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH 0/6] ZynqMP clock driver To: Michael Tretter Cc: barebox@lists.infradead.org On Tue, Mar 12, 2019 at 11:20:49AM +0100, Michael Tretter wrote: > Hello, > > This series adds a clock driver for the ZynqMP. On ZynqMP, Barebox does not > have direct access to the hardware but needs to go through the firmware to > configure the clock tree. > > Patches 1 and 2 update how firmware device tree nodes are populated. The > behavior for this is copied from Linux. > > Patch 3 provides the size of the return value from the ZynqMP firmware to > firmware client drivers. This is necessary to use the "query" call. > > Patch 4 adds the actual driver. > > Patches 5 and 6 add the firmware to the device tree and connect various > devices to the clock controller. > > Michael Applied, thanks Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox