[PATCH v2 00/10] ARM: at91: misc fixes and cleanup

[PATCH v2 00/10] ARM: at91: misc fixes and cleanup

[Ahmad Fatoum]

Changes since v1:
  - Collected Sam's Test-by and Reviewed-by
  - Included Sam's fix for the sama5d4 as patch 03
  - moved debug_ll base address defaults to common/Kconfig
  - above also got rid of a typo in the base address constant name
  - added patches 06-09 which remove board-specific helpers as suggested
    by Sascha in the review of the sama5d3 first stage patchset
  - added patch 10 with a fix for a warning I ran into in the newly
    ported clock drivers

Ahmad Fatoum (9):
  ARM: at91: replace __raw_{readl,writel} of peripherals with
    readl,writel
  ARM: at91: debug_ll: make UART base address configurable
  ARM: at91: fix at91sama5_get_ddram_size for sama5d4
  ARM: at91: remove duplicate get_ddram_size code
  ARM: at91: remove at91sam9g45_get_ddram_size helper
  ARM: at91: remove at91sam9n12_get_ddram_size helper
  ARM: at91: remove at91sam9x5_get_ddram_size helper
  ARM: at91: remove at91sama5_get_ddram_size helper
  clk: at91: fix warning about missing const-safety

Sam Ravnborg (1):
  arm: sama5d4: fix stack setup

 arch/arm/boards/at91rm9200ek/lowlevel.c       | 40 ++++-----
 arch/arm/boards/at91sam9m10g45ek/lowlevel.c   |  5 +-
 arch/arm/boards/at91sam9m10ihd/lowlevel.c     |  5 +-
 arch/arm/boards/at91sam9n12ek/lowlevel.c      |  5 +-
 arch/arm/boards/at91sam9x5ek/lowlevel.c       |  4 +-
 arch/arm/boards/pm9g45/lowlevel.c             |  5 +-
 arch/arm/boards/sama5d3_xplained/lowlevel.c   |  4 +-
 arch/arm/boards/sama5d3xek/lowlevel.c         |  4 +-
 arch/arm/boards/sama5d4_xplained/lowlevel.c   |  6 +-
 arch/arm/boards/sama5d4ek/lowlevel.c          |  6 +-
 arch/arm/mach-at91/Kconfig                    | 17 ----
 arch/arm/mach-at91/at91sam9g45_devices.c      |  2 +-
 arch/arm/mach-at91/at91sam9n12_devices.c      |  2 +-
 arch/arm/mach-at91/at91sam9x5_devices.c       |  2 +-
 .../include/mach/at91sam926x_board_init.h     | 22 ++---
 .../mach-at91/include/mach/at91sam9_ddrsdr.h  | 89 +------------------
 .../mach-at91/include/mach/at91sam9_sdramc.h  |  4 +-
 arch/arm/mach-at91/include/mach/debug_ll.h    | 13 +--
 arch/arm/mach-at91/include/mach/gpio.h        | 57 ++++++------
 arch/arm/mach-at91/sam9_smc.c                 | 58 ++++++------
 arch/arm/mach-at91/sama5d3_devices.c          |  2 +-
 arch/arm/mach-at91/sama5d4_devices.c          |  2 +-
 arch/arm/mach-at91/setup.c                    |  4 +-
 common/Kconfig                                | 21 +++++
 drivers/clk/at91/clk-main.c                   |  3 +-
 drivers/clocksource/timer-atmel-pit.c         |  4 +-
 drivers/mci/atmel-mci-regs.h                  |  4 +-
 drivers/net/at91_ether.h                      |  4 +-
 drivers/net/macb.h                            |  8 +-
 drivers/pinctrl/pinctrl-at91.c                | 28 +++---
 drivers/spi/atmel_spi.h                       |  4 +-
 drivers/usb/gadget/at91_udc.c                 | 86 +++++++++---------
 drivers/video/atmel_lcdfb.h                   |  4 +-
 33 files changed, 223 insertions(+), 301 deletions(-)

-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v2 01/10] ARM: at91: replace __raw_{readl, writel} of peripherals with readl, writel

[Ahmad Fatoum]

Use the potentially endianness-changing readl, writel and siblings
directly. They looks prettier and are the correct thing to do, as
even if the CPU is in big-endian mode, the peripherals are little-endian.

Unlike Linux, barebox readl,writel are the same Linux'
{readl,writel}_relaxed (they don't imply memory barriers)
and thus there shouldn't be any functional change.

Patch was generated by a mass search and replace. I looked it over,
adjust some whitespace and further verified by reviewing the output of

	git diff HEAD~1 --word-diff | \
		perl -pe 's/\[-(.*?)__raw_/{+$1/; s/-\]\{\+/+}{+/;' \
		-e 's/(\{\+.*?\+\})\1/__ALL_IS_WELL__/' | grep '+}{+'

which filters out the common case of lines where a single
__raw_{readT,writeT} had its __raw_ prefix stripped without any
further changes.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/arm/boards/at91rm9200ek/lowlevel.c       | 40 ++++-----
 .../include/mach/at91sam926x_board_init.h     | 22 ++---
 .../mach-at91/include/mach/at91sam9_ddrsdr.h  |  8 +-
 .../mach-at91/include/mach/at91sam9_sdramc.h  |  4 +-
 arch/arm/mach-at91/include/mach/debug_ll.h    |  6 +-
 arch/arm/mach-at91/include/mach/gpio.h        | 57 ++++++------
 arch/arm/mach-at91/sam9_smc.c                 | 58 ++++++-------
 arch/arm/mach-at91/setup.c                    |  4 +-
 drivers/clocksource/timer-atmel-pit.c         |  4 +-
 drivers/mci/atmel-mci-regs.h                  |  4 +-
 drivers/net/at91_ether.h                      |  4 +-
 drivers/net/macb.h                            |  8 +-
 drivers/pinctrl/pinctrl-at91.c                | 28 +++---
 drivers/spi/atmel_spi.h                       |  4 +-
 drivers/usb/gadget/at91_udc.c                 | 86 +++++++++----------
 drivers/video/atmel_lcdfb.h                   |  4 +-
 16 files changed, 168 insertions(+), 173 deletions(-)

diff --git a/arch/arm/boards/at91rm9200ek/lowlevel.c b/arch/arm/boards/at91rm9200ek/lowlevel.c
index 030c3dbf04a5..b132ccc08431 100644
--- a/arch/arm/boards/at91rm9200ek/lowlevel.c
+++ b/arch/arm/boards/at91rm9200ek/lowlevel.c
@@ -33,28 +33,28 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 	/*
 	 * PMC Check if the PLL is already initialized
 	 */
-	r = __raw_readl(pmc + AT91_PMC_MCKR);
+	r = readl(pmc + AT91_PMC_MCKR);
 	if (r & AT91_PMC_CSS)
 		goto end;
 
 	/*
 	 * Enable the Main Oscillator
 	 */
-	__raw_writel(CONFIG_SYS_MOR_VAL, pmc + AT91_CKGR_MOR);
+	writel(CONFIG_SYS_MOR_VAL, pmc + AT91_CKGR_MOR);
 
 	do {
-		r = __raw_readl(pmc + AT91_PMC_SR);
+		r = readl(pmc + AT91_PMC_SR);
 	} while (!(r & AT91_PMC_MOSCS));
 
 	/*
 	 * EBI_CFGR
 	 */
-	__raw_writel(CONFIG_SYS_EBI_CFGR_VAL, mc + AT91RM9200_EBI_CFGR);
+	writel(CONFIG_SYS_EBI_CFGR_VAL, mc + AT91RM9200_EBI_CFGR);
 
 	/*
 	 * SMC2_CSR[0]: 16bit, 2 TDF, 4 WS
 	 */
-	__raw_writel(CONFIG_SYS_SMC_CSR0_VAL, mc + AT91RM9200_SMC_CSR(0));
+	writel(CONFIG_SYS_SMC_CSR0_VAL, mc + AT91RM9200_SMC_CSR(0));
 
 	/*
 	 * Init Clocks
@@ -63,24 +63,24 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 	/*
 	 * PLLAR: x MHz for PCK
 	 */
-	__raw_writel(CONFIG_SYS_PLLAR_VAL, pmc + AT91_CKGR_PLLAR);
+	writel(CONFIG_SYS_PLLAR_VAL, pmc + AT91_CKGR_PLLAR);
 
 	do {
-		r = __raw_readl(pmc + AT91_PMC_SR);
+		r = readl(pmc + AT91_PMC_SR);
 	} while (!(r & AT91_PMC_LOCKA));
 
 	/*
 	 * PCK/x = MCK Master Clock from SLOW
 	 */
-	__raw_writel(CONFIG_SYS_MCKR2_VAL1, pmc + AT91_PMC_MCKR);
+	writel(CONFIG_SYS_MCKR2_VAL1, pmc + AT91_PMC_MCKR);
 
 	/*
 	 * PCK/x = MCK Master Clock from PLLA
 	 */
-	__raw_writel(CONFIG_SYS_MCKR2_VAL2, pmc + AT91_PMC_MCKR);
+	writel(CONFIG_SYS_MCKR2_VAL2, pmc + AT91_PMC_MCKR);
 
 	do {
-		r = __raw_readl(pmc + AT91_PMC_SR);
+		r = readl(pmc + AT91_PMC_SR);
 	} while (!(r & AT91_PMC_MCKRDY));
 
 	/*
@@ -88,38 +88,38 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 	 */
 
 	/* PIOC_ASR: Configure PIOC as peripheral (D16/D31) */
-	__raw_writel(CONFIG_SYS_PIOC_ASR_VAL, AT91RM9200_BASE_PIOC + PIO_ASR);
+	writel(CONFIG_SYS_PIOC_ASR_VAL, AT91RM9200_BASE_PIOC + PIO_ASR);
 	/* PIOC_BSR */
-	__raw_writel(CONFIG_SYS_PIOC_BSR_VAL, AT91RM9200_BASE_PIOC + PIO_BSR);
+	writel(CONFIG_SYS_PIOC_BSR_VAL, AT91RM9200_BASE_PIOC + PIO_BSR);
 	/* PIOC_PDR */
-	__raw_writel(CONFIG_SYS_PIOC_PDR_VAL, AT91RM9200_BASE_PIOC + PIO_PDR);
+	writel(CONFIG_SYS_PIOC_PDR_VAL, AT91RM9200_BASE_PIOC + PIO_PDR);
 
 	/* EBI_CSA : CS1=SDRAM */
-	__raw_writel(CONFIG_SYS_EBI_CSA_VAL, mc + AT91RM9200_EBI_CSA);
+	writel(CONFIG_SYS_EBI_CSA_VAL, mc + AT91RM9200_EBI_CSA);
 
 	/* SDRC_CR */
-	__raw_writel(CONFIG_SYS_SDRC_CR_VAL, mc + AT91RM9200_SDRAMC_CR);
+	writel(CONFIG_SYS_SDRC_CR_VAL, mc + AT91RM9200_SDRAMC_CR);
 	/* SDRC_MR : Precharge All */
-	__raw_writel(AT91RM9200_SDRAMC_MODE_PRECHARGE, mc + AT91RM9200_SDRAMC_MR);
+	writel(AT91RM9200_SDRAMC_MODE_PRECHARGE, mc + AT91RM9200_SDRAMC_MR);
 	/* access SDRAM */
 	access_sdram();
 	/* SDRC_MR : refresh */
-	__raw_writel(AT91RM9200_SDRAMC_MODE_REFRESH, mc + AT91RM9200_SDRAMC_MR);
+	writel(AT91RM9200_SDRAMC_MODE_REFRESH, mc + AT91RM9200_SDRAMC_MR);
 
 	/* access SDRAM 8 times */
 	for (i = 0; i < 8; i++)
 		access_sdram();
 
 	/* SDRC_MR : Load Mode Register */
-	__raw_writel(AT91RM9200_SDRAMC_MODE_LMR, mc + AT91RM9200_SDRAMC_MR);
+	writel(AT91RM9200_SDRAMC_MODE_LMR, mc + AT91RM9200_SDRAMC_MR);
 	/* access SDRAM */
 	access_sdram();
 	/* SDRC_TR : Write refresh rate */
-	__raw_writel(CONFIG_SYS_SDRC_TR_VAL, mc + AT91RM9200_SDRAMC_TR);
+	writel(CONFIG_SYS_SDRC_TR_VAL, mc + AT91RM9200_SDRAMC_TR);
 	/* access SDRAM */
 	access_sdram();
 	/* SDRC_MR : Normal Mode */
-	__raw_writel(AT91RM9200_SDRAMC_MODE_NORMAL, mc + AT91RM9200_SDRAMC_MR);
+	writel(AT91RM9200_SDRAMC_MODE_NORMAL, mc + AT91RM9200_SDRAMC_MR);
 	/* access SDRAM */
 	access_sdram();
 
diff --git a/arch/arm/mach-at91/include/mach/at91sam926x_board_init.h b/arch/arm/mach-at91/include/mach/at91sam926x_board_init.h
index 9ab0eef72813..d52a29e5ef46 100644
--- a/arch/arm/mach-at91/include/mach/at91sam926x_board_init.h
+++ b/arch/arm/mach-at91/include/mach/at91sam926x_board_init.h
@@ -78,43 +78,43 @@ static void __always_inline at91sam926x_sdramc_init(struct at91sam926x_board_cfg
 	int in_sram = running_in_sram();
 
 	/* SDRAMC Check if Refresh Timer Counter is already initialized */
-	r = __raw_readl(cfg->sdramc + AT91_SDRAMC_TR);
+	r = readl(cfg->sdramc + AT91_SDRAMC_TR);
 	if (r && !in_sram)
 		return;
 
 	/* SDRAMC_MR : Normal Mode */
-	__raw_writel(AT91_SDRAMC_MODE_NORMAL, cfg->sdramc + AT91_SDRAMC_MR);
+	writel(AT91_SDRAMC_MODE_NORMAL, cfg->sdramc + AT91_SDRAMC_MR);
 
 	/* SDRAMC_TR - Refresh Timer register */
-	__raw_writel(cfg->sdrc_tr1, cfg->sdramc + AT91_SDRAMC_TR);
+	writel(cfg->sdrc_tr1, cfg->sdramc + AT91_SDRAMC_TR);
 
 	/* SDRAMC_CR - Configuration register*/
-	__raw_writel(cfg->sdrc_cr, cfg->sdramc + AT91_SDRAMC_CR);
+	writel(cfg->sdrc_cr, cfg->sdramc + AT91_SDRAMC_CR);
 
 	/* Memory Device Type */
-	__raw_writel(cfg->sdrc_mdr, cfg->sdramc + AT91_SDRAMC_MDR);
+	writel(cfg->sdrc_mdr, cfg->sdramc + AT91_SDRAMC_MDR);
 
 	/* SDRAMC_MR : Precharge All */
-	__raw_writel(AT91_SDRAMC_MODE_PRECHARGE, cfg->sdramc + AT91_SDRAMC_MR);
+	writel(AT91_SDRAMC_MODE_PRECHARGE, cfg->sdramc + AT91_SDRAMC_MR);
 	access_sdram();
 
 	/* SDRAMC_MR : refresh */
-	__raw_writel(AT91_SDRAMC_MODE_REFRESH, cfg->sdramc + AT91_SDRAMC_MR);
+	writel(AT91_SDRAMC_MODE_REFRESH, cfg->sdramc + AT91_SDRAMC_MR);
 
 	/* access SDRAM 8 times */
 	for (i = 0; i < 8; i++)
 		access_sdram();
 
 	/* SDRAMC_MR : Load Mode Register */
-	__raw_writel(AT91_SDRAMC_MODE_LMR, cfg->sdramc + AT91_SDRAMC_MR);
+	writel(AT91_SDRAMC_MODE_LMR, cfg->sdramc + AT91_SDRAMC_MR);
 	access_sdram();
 
 	/* SDRAMC_MR : Normal Mode */
-	__raw_writel(AT91_SDRAMC_MODE_NORMAL, cfg->sdramc + AT91_SDRAMC_MR);
+	writel(AT91_SDRAMC_MODE_NORMAL, cfg->sdramc + AT91_SDRAMC_MR);
 	access_sdram();
 
 	/* SDRAMC_TR : Refresh Timer Counter */
-	__raw_writel(cfg->sdrc_tr2, cfg->sdramc + AT91_SDRAMC_TR);
+	writel(cfg->sdrc_tr2, cfg->sdramc + AT91_SDRAMC_TR);
 	access_sdram();
 }
 
@@ -127,7 +127,7 @@ static void __always_inline at91sam926x_board_init(void __iomem *smcbase,
 	if (!IS_ENABLED(CONFIG_AT91SAM926X_BOARD_INIT))
 		return;
 
-	__raw_writel(cfg->wdt_mr, AT91SAM926X_BASE_WDT + AT91_WDT_MR);
+	writel(cfg->wdt_mr, AT91SAM926X_BASE_WDT + AT91_WDT_MR);
 
 	/* configure PIOx as EBI0 D[16-31] */
 	at91_mux_gpio_disable(cfg->pio, cfg->ebi_pio_pdr);
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
index 1c4d313eb486..b0c003cd1e05 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
@@ -145,8 +145,8 @@ static inline u32 at91_get_ddram_size(void * __iomem base, bool is_nb)
 	u32 size;
 	bool is_sdram;
 
-	cr = __raw_readl(base + AT91_DDRSDRC_CR);
-	mdr = __raw_readl(base + AT91_DDRSDRC_MDR);
+	cr = readl(base + AT91_DDRSDRC_CR);
+	mdr = readl(base + AT91_DDRSDRC_MDR);
 
 	is_sdram = (mdr & AT91_DDRSDRC_MD) <= AT91_DDRSDRC_MD_LOW_POWER_SDR;
 
@@ -230,8 +230,8 @@ static inline u32 at91sama5_get_ddram_size(void)
 	u32 size;
 	void * __iomem base = IOMEM(SAMA5D3_BASE_MPDDRC);
 
-	cr = __raw_readl(base + AT91_DDRSDRC_CR);
-	mdr = __raw_readl(base + AT91_DDRSDRC_MDR);
+	cr = readl(base + AT91_DDRSDRC_CR);
+	mdr = readl(base + AT91_DDRSDRC_MDR);
 
 	/* Formula:
 	 * size = bank << (col + row + 1);
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
index 8595f9cd5cc7..7bd887c8cbcf 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
@@ -90,7 +90,7 @@ static inline u32 at91_get_sdram_size(void *base)
 	u32 val;
 	u32 size;
 
-	val = __raw_readl(base + AT91_SDRAMC_CR);
+	val = readl(base + AT91_SDRAMC_CR);
 
 	/* Formula:
 	 * size = bank << (col + row + 1);
@@ -114,7 +114,7 @@ static inline u32 at91_get_sdram_size(void *base)
 
 static inline bool at91_is_low_power_sdram(void *base)
 {
-	return __raw_readl(base + AT91_SDRAMC_MDR) & AT91_SDRAMC_MD_LOW_POWER_SDRAM;
+	return readl(base + AT91_SDRAMC_MDR) & AT91_SDRAMC_MD_LOW_POWER_SDRAM;
 }
 
 #ifdef CONFIG_SOC_AT91SAM9260
diff --git a/arch/arm/mach-at91/include/mach/debug_ll.h b/arch/arm/mach-at91/include/mach/debug_ll.h
index 42728a4b2789..fd26cae21ef2 100644
--- a/arch/arm/mach-at91/include/mach/debug_ll.h
+++ b/arch/arm/mach-at91/include/mach/debug_ll.h
@@ -31,11 +31,11 @@
  */
 static inline void PUTC_LL(char c)
 {
-	while (!(__raw_readl(UART_BASE + ATMEL_US_CSR) & ATMEL_US_TXRDY))
+	while (!(readl(UART_BASE + ATMEL_US_CSR) & ATMEL_US_TXRDY))
 		barrier();
-	__raw_writel(c, UART_BASE + ATMEL_US_THR);
+	writel(c, UART_BASE + ATMEL_US_THR);
 
-	while (!(__raw_readl(UART_BASE + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
+	while (!(readl(UART_BASE + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
 		barrier();
 }
 #endif
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index bdc0cb68792c..f5ab47c0649a 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -26,67 +26,62 @@ static inline unsigned pin_to_mask(unsigned pin)
 
 static inline void at91_mux_disable_interrupt(void __iomem *pio, unsigned mask)
 {
-	__raw_writel(mask, pio + PIO_IDR);
+	writel(mask, pio + PIO_IDR);
 }
 
 static inline void at91_mux_set_pullup(void __iomem *pio, unsigned mask, bool on)
 {
-	__raw_writel(mask, pio + (on ? PIO_PUER : PIO_PUDR));
+	writel(mask, pio + (on ? PIO_PUER : PIO_PUDR));
 }
 
 static inline void at91_mux_set_multidrive(void __iomem *pio, unsigned mask, bool on)
 {
-	__raw_writel(mask, pio + (on ? PIO_MDER : PIO_MDDR));
+	writel(mask, pio + (on ? PIO_MDER : PIO_MDDR));
 }
 
 static inline void at91_mux_set_A_periph(void __iomem *pio, unsigned mask)
 {
-	__raw_writel(mask, pio + PIO_ASR);
+	writel(mask, pio + PIO_ASR);
 }
 
 static inline void at91_mux_set_B_periph(void __iomem *pio, unsigned mask)
 {
-	__raw_writel(mask, pio + PIO_BSR);
+	writel(mask, pio + PIO_BSR);
 }
 
 static inline void at91_mux_pio3_set_A_periph(void __iomem *pio, unsigned mask)
 {
-
-	__raw_writel(__raw_readl(pio + PIO_ABCDSR1) & ~mask,
-						pio + PIO_ABCDSR1);
-	__raw_writel(__raw_readl(pio + PIO_ABCDSR2) & ~mask,
-						pio + PIO_ABCDSR2);
+	writel(readl(pio + PIO_ABCDSR1) & ~mask, pio + PIO_ABCDSR1);
+	writel(readl(pio + PIO_ABCDSR2) & ~mask, pio + PIO_ABCDSR2);
 }
 
 static inline void at91_mux_pio3_set_B_periph(void __iomem *pio, unsigned mask)
 {
-	__raw_writel(__raw_readl(pio + PIO_ABCDSR1) | mask,
-						pio + PIO_ABCDSR1);
-	__raw_writel(__raw_readl(pio + PIO_ABCDSR2) & ~mask,
-						pio + PIO_ABCDSR2);
+	writel(readl(pio + PIO_ABCDSR1) |  mask, pio + PIO_ABCDSR1);
+	writel(readl(pio + PIO_ABCDSR2) & ~mask, pio + PIO_ABCDSR2);
 }
 
 static inline void at91_mux_pio3_set_C_periph(void __iomem *pio, unsigned mask)
 {
-	__raw_writel(__raw_readl(pio + PIO_ABCDSR1) & ~mask, pio + PIO_ABCDSR1);
-	__raw_writel(__raw_readl(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2);
+	writel(readl(pio + PIO_ABCDSR1) & ~mask, pio + PIO_ABCDSR1);
+	writel(readl(pio + PIO_ABCDSR2) |  mask, pio + PIO_ABCDSR2);
 }
 
 static inline void at91_mux_pio3_set_D_periph(void __iomem *pio, unsigned mask)
 {
-	__raw_writel(__raw_readl(pio + PIO_ABCDSR1) | mask, pio + PIO_ABCDSR1);
-	__raw_writel(__raw_readl(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2);
+	writel(readl(pio + PIO_ABCDSR1) | mask, pio + PIO_ABCDSR1);
+	writel(readl(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2);
 }
 
 static inline void at91_mux_set_deglitch(void __iomem *pio, unsigned mask, bool is_on)
 {
-	__raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
+	writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
 }
 
 static inline void at91_mux_pio3_set_deglitch(void __iomem *pio, unsigned mask, bool is_on)
 {
 	if (is_on)
-		__raw_writel(mask, pio + PIO_IFSCDR);
+		writel(mask, pio + PIO_IFSCDR);
 	at91_mux_set_deglitch(pio, mask, is_on);
 }
 
@@ -94,50 +89,50 @@ static inline void at91_mux_pio3_set_debounce(void __iomem *pio, unsigned mask,
 				bool is_on, u32 div)
 {
 	if (is_on) {
-		__raw_writel(mask, pio + PIO_IFSCER);
-		__raw_writel(div & PIO_SCDR_DIV, pio + PIO_SCDR);
-		__raw_writel(mask, pio + PIO_IFER);
+		writel(mask, pio + PIO_IFSCER);
+		writel(div & PIO_SCDR_DIV, pio + PIO_SCDR);
+		writel(mask, pio + PIO_IFER);
 	} else {
-		__raw_writel(mask, pio + PIO_IFDR);
+		writel(mask, pio + PIO_IFDR);
 	}
 }
 
 static inline void at91_mux_pio3_set_pulldown(void __iomem *pio, unsigned mask, bool is_on)
 {
-	__raw_writel(mask, pio + (is_on ? PIO_PPDER : PIO_PPDDR));
+	writel(mask, pio + (is_on ? PIO_PPDER : PIO_PPDDR));
 }
 
 static inline void at91_mux_pio3_disable_schmitt_trig(void __iomem *pio, unsigned mask)
 {
-	__raw_writel(__raw_readl(pio + PIO_SCHMITT) | mask, pio + PIO_SCHMITT);
+	writel(readl(pio + PIO_SCHMITT) | mask, pio + PIO_SCHMITT);
 }
 
 static inline void at91_mux_gpio_disable(void __iomem *pio, unsigned mask)
 {
-	__raw_writel(mask, pio + PIO_PDR);
+	writel(mask, pio + PIO_PDR);
 }
 
 static inline void at91_mux_gpio_enable(void __iomem *pio, unsigned mask)
 {
-	__raw_writel(mask, pio + PIO_PER);
+	writel(mask, pio + PIO_PER);
 }
 
 static inline void at91_mux_gpio_input(void __iomem *pio, unsigned mask, bool input)
 {
-	__raw_writel(mask, pio + (input ? PIO_ODR : PIO_OER));
+	writel(mask, pio + (input ? PIO_ODR : PIO_OER));
 }
 
 static inline void at91_mux_gpio_set(void __iomem *pio, unsigned mask,
 int value)
 {
-	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
+	writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
 }
 
 static inline int at91_mux_gpio_get(void __iomem *pio, unsigned mask)
 {
        u32 pdsr;
 
-       pdsr = __raw_readl(pio + PIO_PDSR);
+       pdsr = readl(pio + PIO_PDSR);
        return (pdsr & mask) != 0;
 }
 
diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c
index dc1f2edf4125..a4d441f02385 100644
--- a/arch/arm/mach-at91/sam9_smc.c
+++ b/arch/arm/mach-at91/sam9_smc.c
@@ -41,23 +41,23 @@ static void sam9_smc_cs_write_mode(void __iomem *base,
 		break;
 	}
 
-	__raw_writel(config->mode
-		   | AT91_SMC_TDF_(config->tdf_cycles),
-		   mode_reg);
+	writel(config->mode
+	       | AT91_SMC_TDF_(config->tdf_cycles),
+	       mode_reg);
 }
 
 static void sam9_smc_cs_write_timings(void __iomem *base,
 					struct sam9_smc_config *config)
 {
-	__raw_writel(AT91_SMC_TCLR_(config->tclr)
-                   | AT91_SMC_TADL_(config->tadl)
-                   | AT91_SMC_TAR_(config->tar)
-                   | AT91_SMC_OCMS_(config->ocms)
-                   | AT91_SMC_TRR_(config->trr)
-                   | AT91_SMC_TWB_(config->twb)
-                   | AT91_SMC_RBNSEL_(config->rbnsel)
-                   | AT91_SMC_NFSEL_(config->nfsel),
-		   base + AT91_SAMA5_SMC_TIMINGS);
+	writel(AT91_SMC_TCLR_(config->tclr)
+	       | AT91_SMC_TADL_(config->tadl)
+	       | AT91_SMC_TAR_(config->tar)
+	       | AT91_SMC_OCMS_(config->ocms)
+	       | AT91_SMC_TRR_(config->trr)
+	       | AT91_SMC_TWB_(config->twb)
+	       | AT91_SMC_RBNSEL_(config->rbnsel)
+	       | AT91_SMC_NFSEL_(config->nfsel),
+	       base + AT91_SAMA5_SMC_TIMINGS);
 }
 
 void sam9_smc_write_mode(int id, int cs,
@@ -71,23 +71,23 @@ static void sam9_smc_cs_configure(void __iomem *base,
 {
 
 	/* Setup register */
-	__raw_writel(AT91_SMC_NWESETUP_(config->nwe_setup)
-		   | AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup)
-		   | AT91_SMC_NRDSETUP_(config->nrd_setup)
-		   | AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup),
-		   base + AT91_SMC_SETUP);
+	writel(AT91_SMC_NWESETUP_(config->nwe_setup)
+	       | AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup)
+	       | AT91_SMC_NRDSETUP_(config->nrd_setup)
+	       | AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup),
+	       base + AT91_SMC_SETUP);
 
 	/* Pulse register */
-	__raw_writel(AT91_SMC_NWEPULSE_(config->nwe_pulse)
-		   | AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse)
-		   | AT91_SMC_NRDPULSE_(config->nrd_pulse)
-		   | AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse),
-		   base + AT91_SMC_PULSE);
+	writel(AT91_SMC_NWEPULSE_(config->nwe_pulse)
+	       | AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse)
+	       | AT91_SMC_NRDPULSE_(config->nrd_pulse)
+	       | AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse),
+	       base + AT91_SMC_PULSE);
 
 	/* Cycle register */
-	__raw_writel(AT91_SMC_NWECYCLE_(config->write_cycle)
-		   | AT91_SMC_NRDCYCLE_(config->read_cycle),
-		   base + AT91_SMC_CYCLE);
+	writel(AT91_SMC_NWECYCLE_(config->write_cycle)
+	       | AT91_SMC_NRDCYCLE_(config->read_cycle),
+	       base + AT91_SMC_CYCLE);
 
 	/* Mode register */
 	sam9_smc_cs_write_mode(base, config);
@@ -115,7 +115,7 @@ static void sam9_smc_cs_read_mode(void __iomem *base,
 		break;
 	}
 
-	val = __raw_readl(mode_reg);
+	val = readl(mode_reg);
 
 	config->mode = (val & ~AT91_SMC_NWECYCLE);
 	config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ;
@@ -133,7 +133,7 @@ static void sam9_smc_cs_read(void __iomem *base,
 	u32 val;
 
 	/* Setup register */
-	val = __raw_readl(base + AT91_SMC_SETUP);
+	val = readl(base + AT91_SMC_SETUP);
 
 	config->nwe_setup = val & AT91_SMC_NWESETUP;
 	config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8;
@@ -141,7 +141,7 @@ static void sam9_smc_cs_read(void __iomem *base,
 	config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24;
 
 	/* Pulse register */
-	val = __raw_readl(base + AT91_SMC_PULSE);
+	val = readl(base + AT91_SMC_PULSE);
 
 	config->nwe_setup = val & AT91_SMC_NWEPULSE;
 	config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8;
@@ -149,7 +149,7 @@ static void sam9_smc_cs_read(void __iomem *base,
 	config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24;
 
 	/* Cycle register */
-	val = __raw_readl(base + AT91_SMC_CYCLE);
+	val = readl(base + AT91_SMC_CYCLE);
 
 	config->write_cycle = val & AT91_SMC_NWECYCLE;
 	config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16;
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index cb79eb26b8e7..4e30c78de78d 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -29,11 +29,11 @@ static void __init soc_detect(u32 dbgu_base)
 {
 	u32 cidr, socid;
 
-	cidr = __raw_readl(dbgu_base + AT91_DBGU_CIDR);
+	cidr = readl(dbgu_base + AT91_DBGU_CIDR);
 	socid = cidr & ~AT91_CIDR_VERSION;
 
 	/* sub version of soc */
-	at91_soc_initdata.exid = __raw_readl(dbgu_base + AT91_DBGU_EXID);
+	at91_soc_initdata.exid = readl(dbgu_base + AT91_DBGU_EXID);
 
 	switch (socid) {
 	case ARCH_ID_AT91RM9200:
diff --git a/drivers/clocksource/timer-atmel-pit.c b/drivers/clocksource/timer-atmel-pit.c
index e23f1e5ec4e1..6e8665348060 100644
--- a/drivers/clocksource/timer-atmel-pit.c
+++ b/drivers/clocksource/timer-atmel-pit.c
@@ -35,8 +35,8 @@
 #include <linux/err.h>
 
 #define PIT_CPIV(x)	((x) & AT91_PIT_CPIV)
-#define pit_write(reg, val)	__raw_writel(val, pit_base + reg)
-#define pit_read(reg)		__raw_readl(pit_base + reg)
+#define pit_write(reg, val)	writel(val, pit_base + reg)
+#define pit_read(reg)		readl(pit_base + reg)
 
 static __iomem void *pit_base;
 
diff --git a/drivers/mci/atmel-mci-regs.h b/drivers/mci/atmel-mci-regs.h
index af1dba00f9b5..2866e3eb77d0 100644
--- a/drivers/mci/atmel-mci-regs.h
+++ b/drivers/mci/atmel-mci-regs.h
@@ -138,9 +138,9 @@
 
 /* Register access macros */
 #define atmci_readl(port,reg)				\
-	__raw_readl((port)->regs + reg)
+	readl((port)->regs + reg)
 #define atmci_writel(port,reg,value)			\
-	__raw_writel((value), (port)->regs + reg)
+	writel((value), (port)->regs + reg)
 
 /* On AVR chips the Peripheral DMA Controller is not connected to MCI. */
 #ifdef CONFIG_AVR32
diff --git a/drivers/net/at91_ether.h b/drivers/net/at91_ether.h
index 08df6f161ca4..21c2ae94da43 100644
--- a/drivers/net/at91_ether.h
+++ b/drivers/net/at91_ether.h
@@ -33,7 +33,7 @@ struct rbf_t
  */
 static inline unsigned long at91_emac_read(unsigned int reg)
 {
-	return __raw_readl(AT91_VA_BASE_EMAC + reg);
+	return readl(AT91_VA_BASE_EMAC + reg);
 }
 
 /*
@@ -41,6 +41,6 @@ static inline unsigned long at91_emac_read(unsigned int reg)
  */
 static inline void at91_emac_write(unsigned int reg, unsigned long value)
 {
-	__raw_writel(value, AT91_VA_BASE_EMAC + reg);
+	writel(value, AT91_VA_BASE_EMAC + reg);
 }
 #endif
diff --git a/drivers/net/macb.h b/drivers/net/macb.h
index 979f53cb715d..fda4d086631a 100644
--- a/drivers/net/macb.h
+++ b/drivers/net/macb.h
@@ -334,13 +334,13 @@
 
 /* Register access macros */
 #define macb_readl(port,reg)				\
-	__raw_readl((port)->regs + MACB_##reg)
+	readl((port)->regs + MACB_##reg)
 #define macb_writel(port,reg,value)			\
-	__raw_writel((value), (port)->regs + MACB_##reg)
+	writel((value), (port)->regs + MACB_##reg)
 #define gem_readl(port, reg)				\
-	__raw_readl((port)->regs + GEM_##reg)
+	readl((port)->regs + GEM_##reg)
 #define gem_writel(port, reg, value)			\
-	__raw_writel((value), (port)->regs + GEM_##reg)
+	writel((value), (port)->regs + GEM_##reg)
 
 /*
  * Conditional GEM/MACB macros.  These perform the operation to the correct
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 11e00833c586..9b366e48120f 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -303,11 +303,11 @@ static enum at91_mux at91_mux_pio3_get_periph(void __iomem *pio, unsigned mask)
 {
 	unsigned select;
 
-	if (__raw_readl(pio + PIO_PSR) & mask)
+	if (readl(pio + PIO_PSR) & mask)
 		return AT91_MUX_GPIO;
 
-	select = !!(__raw_readl(pio + PIO_ABCDSR1) & mask);
-	select |= (!!(__raw_readl(pio + PIO_ABCDSR2) & mask) << 1);
+	select = !!(readl(pio + PIO_ABCDSR1) & mask);
+	select |= (!!(readl(pio + PIO_ABCDSR2) & mask) << 1);
 
 	return select + 1;
 }
@@ -316,34 +316,34 @@ static enum at91_mux at91_mux_get_periph(void __iomem *pio, unsigned mask)
 {
 	unsigned select;
 
-	if (__raw_readl(pio + PIO_PSR) & mask)
+	if (readl(pio + PIO_PSR) & mask)
 		return AT91_MUX_GPIO;
 
-	select = __raw_readl(pio + PIO_ABSR) & mask;
+	select = readl(pio + PIO_ABSR) & mask;
 
 	return select + 1;
 }
 
 static bool at91_mux_get_deglitch(void __iomem *pio, unsigned pin)
 {
-	return (__raw_readl(pio + PIO_IFSR) >> pin) & 0x1;
+	return (readl(pio + PIO_IFSR) >> pin) & 0x1;
 }
 
 static bool at91_mux_pio3_get_debounce(void __iomem *pio, unsigned pin, u32 *div)
 {
-	*div = __raw_readl(pio + PIO_SCDR);
+	*div = readl(pio + PIO_SCDR);
 
-	return (__raw_readl(pio + PIO_IFSCSR) >> pin) & 0x1;
+	return (readl(pio + PIO_IFSCSR) >> pin) & 0x1;
 }
 
 static bool at91_mux_pio3_get_pulldown(void __iomem *pio, unsigned pin)
 {
-	return (__raw_readl(pio + PIO_PPDSR) >> pin) & 0x1;
+	return (readl(pio + PIO_PPDSR) >> pin) & 0x1;
 }
 
 static bool at91_mux_pio3_get_schmitt_trig(void __iomem *pio, unsigned pin)
 {
-	return (__raw_readl(pio + PIO_SCHMITT) >> pin) & 0x1;
+	return (readl(pio + PIO_SCHMITT) >> pin) & 0x1;
 }
 
 static struct at91_pinctrl_mux_ops at91rm9200_ops = {
@@ -559,7 +559,7 @@ static int at91_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
 	unsigned mask = 1 << offset;
 
 	at91_mux_gpio_set(pio, mask, value);
-	__raw_writel(mask, pio + PIO_OER);
+	writel(mask, pio + PIO_OER);
 
 	return 0;
 }
@@ -571,8 +571,8 @@ static int at91_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 	unsigned mask = 1 << offset;
 	u32 osr;
 
-	if (mask & __raw_readl(pio + PIO_PSR)) {
-		osr = __raw_readl(pio + PIO_OSR);
+	if (mask & readl(pio + PIO_PSR)) {
+		osr = readl(pio + PIO_OSR);
 		return !(osr & mask);
 	} else {
 		return -EBUSY;
@@ -585,7 +585,7 @@ static int at91_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 	void __iomem *pio = at91_gpio->regbase;
 	unsigned mask = 1 << offset;
 
-	__raw_writel(mask, pio + PIO_ODR);
+	writel(mask, pio + PIO_ODR);
 
 	return 0;
 }
diff --git a/drivers/spi/atmel_spi.h b/drivers/spi/atmel_spi.h
index 3f4d7ba124d2..7c4806981ffc 100644
--- a/drivers/spi/atmel_spi.h
+++ b/drivers/spi/atmel_spi.h
@@ -161,8 +161,8 @@
 
 /* Register access macros */
 #define spi_readl(port, reg) \
-	__raw_readl((port)->regs + SPI_##reg)
+	readl((port)->regs + SPI_##reg)
 #define spi_writel(port, reg, value) \
-	__raw_writel((value), (port)->regs + SPI_##reg)
+	writel((value), (port)->regs + SPI_##reg)
 
 #endif /* __ATMEL_SPI_H__ */
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 243656d443bd..efbc574c2328 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -65,9 +65,9 @@
 static const char ep0name[] = "ep0";
 
 #define at91_udp_read(udc, reg) \
-	__raw_readl((udc)->udp_baseaddr + (reg))
+	readl((udc)->udp_baseaddr + (reg))
 #define at91_udp_write(udc, reg, val) \
-	__raw_writel((val), (udc)->udp_baseaddr + (reg))
+	writel((val), (udc)->udp_baseaddr + (reg))
 
 /*-------------------------------------------------------------------------*/
 
@@ -136,7 +136,7 @@ static int read_fifo (struct at91_ep *ep, struct at91_request *req)
 	 * or if we already emptied both pingpong buffers
 	 */
 rescan:
-	csr = __raw_readl(creg);
+	csr = readl(creg);
 	if ((csr & RX_DATA_READY) == 0)
 		return 0;
 
@@ -162,7 +162,7 @@ rescan:
 		}
 	} else
 		csr &= ~(SET_FX | AT91_UDP_RX_DATA_BK0);
-	__raw_writel(csr, creg);
+	writel(csr, creg);
 
 	req->req.actual += count;
 	is_done = (count < ep->ep.maxpacket);
@@ -184,7 +184,7 @@ rescan:
 		 * CSR returns bad RXCOUNT when read too soon after updating
 		 * RX_DATA_BK flags.
 		 */
-		csr = __raw_readl(creg);
+		csr = readl(creg);
 
 		bufferspace -= count;
 		buf += count;
@@ -198,7 +198,7 @@ rescan:
 static int write_fifo(struct at91_ep *ep, struct at91_request *req)
 {
 	u32 __iomem	*creg = ep->creg;
-	u32		csr = __raw_readl(creg);
+	u32		csr = readl(creg);
 	u8 __iomem	*dreg = ep->creg + (AT91_UDP_FDR(0) - AT91_UDP_CSR(0));
 	unsigned	total, count, is_last;
 	u8		*buf;
@@ -219,8 +219,8 @@ static int write_fifo(struct at91_ep *ep, struct at91_request *req)
 		if (csr & AT91_UDP_TXCOMP) {
 			csr |= CLR_FX;
 			csr &= ~(SET_FX | AT91_UDP_TXCOMP);
-			__raw_writel(csr, creg);
-			csr = __raw_readl(creg);
+			writel(csr, creg);
+			csr = readl(creg);
 		}
 		if (csr & AT91_UDP_TXPKTRDY)
 			return 0;
@@ -340,7 +340,7 @@ ok:
 		tmp |= 0x04;
 	tmp <<= 8;
 	tmp |= AT91_UDP_EPEDS;
-	__raw_writel(tmp, ep->creg);
+	writel(tmp, ep->creg);
 
 	ep->desc = desc;
 	ep->ep.maxpacket = maxpacket;
@@ -373,7 +373,7 @@ static int at91_ep_disable (struct usb_ep * _ep)
 	if (ep->udc->clocked) {
 		at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
 		at91_udp_write(udc, AT91_UDP_RST_EP, 0);
-		__raw_writel(0, ep->creg);
+		writel(0, ep->creg);
 	}
 
 	return 0;
@@ -471,10 +471,10 @@ static int at91_ep_queue(struct usb_ep *_ep,
 ep0_in_status:
 				PACKET("ep0 in/status\n");
 				status = 0;
-				tmp = __raw_readl(ep->creg);
+				tmp = readl(ep->creg);
 				tmp &= ~SET_FX;
 				tmp |= CLR_FX | AT91_UDP_TXPKTRDY;
-				__raw_writel(tmp, ep->creg);
+				writel(tmp, ep->creg);
 				udc->req_pending = 0;
 				goto done;
 			}
@@ -534,7 +534,7 @@ static int at91_ep_set_halt(struct usb_ep *_ep, int value)
 
 	creg = ep->creg;
 
-	csr = __raw_readl(creg);
+	csr = readl(creg);
 
 	/*
 	 * fail with still-busy IN endpoints, ensuring correct sequencing
@@ -554,7 +554,7 @@ static int at91_ep_set_halt(struct usb_ep *_ep, int value)
 			at91_udp_write(udc, AT91_UDP_RST_EP, 0);
 			csr &= ~AT91_UDP_FORCESTALL;
 		}
-		__raw_writel(csr, creg);
+		writel(csr, creg);
 	}
 
 	return status;
@@ -760,7 +760,7 @@ static int handle_ep(struct at91_ep *ep)
 {
 	struct at91_request	*req;
 	u32 __iomem		*creg = ep->creg;
-	u32			csr = __raw_readl(creg);
+	u32			csr = readl(creg);
 
 	if (!list_empty(&ep->queue))
 		req = list_entry(ep->queue.next,
@@ -772,7 +772,7 @@ static int handle_ep(struct at91_ep *ep)
 		if (csr & (AT91_UDP_STALLSENT | AT91_UDP_TXCOMP)) {
 			csr |= CLR_FX;
 			csr &= ~(SET_FX | AT91_UDP_STALLSENT | AT91_UDP_TXCOMP);
-			__raw_writel(csr, creg);
+			writel(csr, creg);
 		}
 		if (req)
 			return write_fifo(ep, req);
@@ -784,8 +784,8 @@ static int handle_ep(struct at91_ep *ep)
 				req->req.status = -EILSEQ;
 			csr |= CLR_FX;
 			csr &= ~(SET_FX | AT91_UDP_STALLSENT);
-			__raw_writel(csr, creg);
-			csr = __raw_readl(creg);
+			writel(csr, creg);
+			csr = readl(creg);
 		}
 		if (req && (csr & RX_DATA_READY))
 			return read_fifo(ep, req);
@@ -811,7 +811,7 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr)
 	rxcount = (csr & AT91_UDP_RXBYTECNT) >> 16;
 	if (likely(rxcount == 8)) {
 		while (rxcount--)
-			pkt.raw[i++] = __raw_readb(dreg);
+			pkt.raw[i++] = readb(dreg);
 		if (pkt.r.bRequestType & USB_DIR_IN) {
 			csr |= AT91_UDP_DIR;
 			ep->is_in = 1;
@@ -826,7 +826,7 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr)
 	}
 	csr |= CLR_FX;
 	csr &= ~(SET_FX | AT91_UDP_RXSETUP);
-	__raw_writel(csr, creg);
+	writel(csr, creg);
 	udc->wait_for_addr_ack = 0;
 	udc->wait_for_config_ack = 0;
 	ep->stopped = 0;
@@ -846,14 +846,14 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr)
 	 * hardware ... notably for device and endpoint features.
 	 */
 	udc->req_pending = 1;
-	csr = __raw_readl(creg);
+	csr = readl(creg);
 	csr |= CLR_FX;
 	csr &= ~SET_FX;
 	switch ((pkt.r.bRequestType << 8) | pkt.r.bRequest) {
 
 	case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
 			| USB_REQ_SET_ADDRESS:
-		__raw_writel(csr | AT91_UDP_TXPKTRDY, creg);
+		writel(csr | AT91_UDP_TXPKTRDY, creg);
 		udc->addr = w_value;
 		udc->wait_for_addr_ack = 1;
 		udc->req_pending = 0;
@@ -882,8 +882,8 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr)
 		if (at91_udp_read(udc, AT91_UDP_GLB_STAT) & AT91_UDP_ESR)
 			tmp |= (1 << USB_DEVICE_REMOTE_WAKEUP);
 		PACKET("get device status\n");
-		__raw_writeb(tmp, dreg);
-		__raw_writeb(0, dreg);
+		writeb(tmp, dreg);
+		writeb(0, dreg);
 		goto write_in;
 		/* then STATUS starts later, automatically */
 	case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8)
@@ -910,8 +910,8 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr)
 	case ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE) << 8)
 			| USB_REQ_GET_STATUS:
 		PACKET("get interface status\n");
-		__raw_writeb(0, dreg);
-		__raw_writeb(0, dreg);
+		writeb(0, dreg);
+		writeb(0, dreg);
 		goto write_in;
 		/* then STATUS starts later, automatically */
 	case ((USB_TYPE_STANDARD|USB_RECIP_INTERFACE) << 8)
@@ -939,12 +939,12 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr)
 				goto stall;
 		}
 		PACKET("get %s status\n", ep->ep.name);
-		if (__raw_readl(ep->creg) & AT91_UDP_FORCESTALL)
+		if (readl(ep->creg) & AT91_UDP_FORCESTALL)
 			tmp = (1 << USB_ENDPOINT_HALT);
 		else
 			tmp = 0;
-		__raw_writeb(tmp, dreg);
-		__raw_writeb(0, dreg);
+		writeb(tmp, dreg);
+		writeb(0, dreg);
 		goto write_in;
 		/* then STATUS starts later, automatically */
 	case ((USB_TYPE_STANDARD|USB_RECIP_ENDPOINT) << 8)
@@ -961,10 +961,10 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr)
 		} else if (ep->is_in)
 			goto stall;
 
-		tmp = __raw_readl(ep->creg);
+		tmp = readl(ep->creg);
 		tmp &= ~SET_FX;
 		tmp |= CLR_FX | AT91_UDP_FORCESTALL;
-		__raw_writel(tmp, ep->creg);
+		writel(tmp, ep->creg);
 		goto succeed;
 	case ((USB_TYPE_STANDARD|USB_RECIP_ENDPOINT) << 8)
 			| USB_REQ_CLEAR_FEATURE:
@@ -984,10 +984,10 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr)
 
 		at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
 		at91_udp_write(udc, AT91_UDP_RST_EP, 0);
-		tmp = __raw_readl(ep->creg);
+		tmp = readl(ep->creg);
 		tmp |= CLR_FX;
 		tmp &= ~(SET_FX | AT91_UDP_FORCESTALL);
-		__raw_writel(tmp, ep->creg);
+		writel(tmp, ep->creg);
 		if (!list_empty(&ep->queue))
 			handle_ep(ep);
 		goto succeed;
@@ -1008,7 +1008,7 @@ stall:
 		VDBG(udc, "req %02x.%02x protocol STALL; stat %d\n",
 				pkt.r.bRequestType, pkt.r.bRequest, status);
 		csr |= AT91_UDP_FORCESTALL;
-		__raw_writel(csr, creg);
+		writel(csr, creg);
 		udc->req_pending = 0;
 	}
 	return;
@@ -1018,7 +1018,7 @@ succeed:
 	PACKET("ep0 in/status\n");
 write_in:
 	csr |= AT91_UDP_TXPKTRDY;
-	__raw_writel(csr, creg);
+	writel(csr, creg);
 	udc->req_pending = 0;
 }
 
@@ -1026,7 +1026,7 @@ static void handle_ep0(struct at91_udc *udc)
 {
 	struct at91_ep		*ep0 = &udc->ep[0];
 	u32 __iomem		*creg = ep0->creg;
-	u32			csr = __raw_readl(creg);
+	u32			csr = readl(creg);
 	struct at91_request	*req;
 
 	if (unlikely(csr & AT91_UDP_STALLSENT)) {
@@ -1034,9 +1034,9 @@ static void handle_ep0(struct at91_udc *udc)
 		udc->req_pending = 0;
 		csr |= CLR_FX;
 		csr &= ~(SET_FX | AT91_UDP_STALLSENT | AT91_UDP_FORCESTALL);
-		__raw_writel(csr, creg);
+		writel(csr, creg);
 		VDBG(udc, "ep0 stalled\n");
-		csr = __raw_readl(creg);
+		csr = readl(creg);
 	}
 	if (csr & AT91_UDP_RXSETUP) {
 		nuke(ep0, 0);
@@ -1070,7 +1070,7 @@ static void handle_ep0(struct at91_udc *udc)
 		 */
 		} else {
 			udc->req_pending = 0;
-			__raw_writel(csr, creg);
+			writel(csr, creg);
 
 			/*
 			 * SET_ADDRESS takes effect only after the STATUS
@@ -1104,10 +1104,10 @@ static void handle_ep0(struct at91_udc *udc)
 				if (handle_ep(ep0)) {
 					/* send IN/STATUS */
 					PACKET("ep0 in/status\n");
-					csr = __raw_readl(creg);
+					csr = readl(creg);
 					csr &= ~SET_FX;
 					csr |= CLR_FX | AT91_UDP_TXPKTRDY;
-					__raw_writel(csr, creg);
+					writel(csr, creg);
 					udc->req_pending = 0;
 				}
 			} else if (udc->req_pending) {
@@ -1129,14 +1129,14 @@ static void handle_ep0(struct at91_udc *udc)
 				 * that gadget drivers not use this mode.
 				 */
 				DBG(udc, "no control-OUT deferred responses!\n");
-				__raw_writel(csr | AT91_UDP_FORCESTALL, creg);
+				writel(csr | AT91_UDP_FORCESTALL, creg);
 				udc->req_pending = 0;
 			}
 
 		/* STATUS stage for control-IN; ack.  */
 		} else {
 			PACKET("ep0 out/status ACK\n");
-			__raw_writel(csr, creg);
+			writel(csr, creg);
 
 			/* "early" status stage */
 			if (req)
diff --git a/drivers/video/atmel_lcdfb.h b/drivers/video/atmel_lcdfb.h
index b8458924ba15..76c0e739e858 100644
--- a/drivers/video/atmel_lcdfb.h
+++ b/drivers/video/atmel_lcdfb.h
@@ -43,8 +43,8 @@ struct atmel_lcdfb_info {
 	void			*dma_desc;
 };
 
-#define lcdc_readl(sinfo, reg)		__raw_readl((sinfo)->mmio+(reg))
-#define lcdc_writel(sinfo, reg, val)	__raw_writel((val), (sinfo)->mmio+(reg))
+#define lcdc_readl(sinfo, reg)		readl((sinfo)->mmio+(reg))
+#define lcdc_writel(sinfo, reg, val)	writel((val), (sinfo)->mmio+(reg))
 
 #define ATMEL_LCDC_STOP_NOWAIT (1 << 0)
 
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v2 02/10] ARM: at91: debug_ll: make UART base address configurable

[Ahmad Fatoum]

This is in line with other platforms such as i.MX, which allow
specifying a debug port. As we can't use port indices because
the UARTs aren't mapped consecutively, allow specifying a hex
base at configuration time.

A side effect of this patch is that sama5d4's HAVE_AT91_DBGU2
is now honored as well. Previously anything besides DBGU0
defaulted to DBGU1.

Fixes: 06a0773ee31 ("ARM: at91: add sama5d4 soc support #2")
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
[afa: moved base address defaults to common/Kconfig]
Signed-off-by: Ahmad Fatoum <afa@pengutronix.de>
---
 arch/arm/mach-at91/Kconfig                 | 17 -----------------
 arch/arm/mach-at91/include/mach/debug_ll.h | 13 +++----------
 common/Kconfig                             | 21 +++++++++++++++++++++
 3 files changed, 24 insertions(+), 27 deletions(-)

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index efed73827849..8e1bf0629ab7 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,14 +1,5 @@
 if ARCH_AT91
 
-config HAVE_AT91_DBGU0
-	bool
-
-config HAVE_AT91_DBGU1
-	bool
-
-config HAVE_AT91_DBGU2
-	bool
-
 config HAVE_AT91_UTMI
 	bool
 
@@ -115,7 +106,6 @@ config SOC_AT91RM9200
 config SOC_AT91SAM9260
 	bool
 	select SOC_AT91SAM9
-	select HAVE_AT91_DBGU0
 	select HAS_MACB
 	help
 	  Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
@@ -124,21 +114,18 @@ config SOC_AT91SAM9260
 config SOC_AT91SAM9261
 	bool
 	select SOC_AT91SAM9
-	select HAVE_AT91_DBGU0
 	help
 	  Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
 
 config SOC_AT91SAM9263
 	bool
 	select SOC_AT91SAM9
-	select HAVE_AT91_DBGU1
 	select HAS_MACB
 	select HAVE_AT91_LOAD_BAREBOX_SRAM
 
 config SOC_AT91SAM9G45
 	bool
 	select SOC_AT91SAM9
-	select HAVE_AT91_DBGU1
 	select HAS_MACB
 	help
 	  Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
@@ -147,7 +134,6 @@ config SOC_AT91SAM9G45
 config SOC_AT91SAM9X5
 	bool
 	select SOC_AT91SAM9
-	select HAVE_AT91_DBGU0
 	select HAS_MACB
 	select COMMON_CLK_OF_PROVIDER
 	help
@@ -160,7 +146,6 @@ config SOC_AT91SAM9X5
 config SOC_AT91SAM9N12
 	bool
 	select SOC_AT91SAM9
-	select HAVE_AT91_DBGU0
 	help
 	  Select this if you are using Atmel's AT91SAM9N12 SoC.
 
@@ -213,14 +198,12 @@ config ARCH_AT91SAM9N12
 config ARCH_SAMA5D3
 	bool "SAMA5D3x"
 	select SOC_SAMA5D3
-	select HAVE_AT91_DBGU1
 	select HAS_MACB
 	select HAVE_MACH_ARM_HEAD
 
 config ARCH_SAMA5D4
 	bool "SAMA5D4"
 	select SOC_SAMA5D4
-	select HAVE_AT91_DBGU2
 	select HAS_MACB
 	select HAVE_MACH_ARM_HEAD
 
diff --git a/arch/arm/mach-at91/include/mach/debug_ll.h b/arch/arm/mach-at91/include/mach/debug_ll.h
index fd26cae21ef2..b71393042463 100644
--- a/arch/arm/mach-at91/include/mach/debug_ll.h
+++ b/arch/arm/mach-at91/include/mach/debug_ll.h
@@ -9,13 +9,6 @@
 #define __MACH_DEBUG_LL_H__
 
 #include <asm/io.h>
-#include <mach/hardware.h>
-
-#ifdef CONFIG_HAVE_AT91_DBGU0
-#define UART_BASE	AT91_BASE_DBGU0
-#else
-#define UART_BASE	AT91_BASE_DBGU1
-#endif
 
 #define ATMEL_US_CSR		0x0014
 #define ATMEL_US_THR		0x001c
@@ -31,11 +24,11 @@
  */
 static inline void PUTC_LL(char c)
 {
-	while (!(readl(UART_BASE + ATMEL_US_CSR) & ATMEL_US_TXRDY))
+	while (!(readl(CONFIG_DEBUG_AT91_UART_BASE + ATMEL_US_CSR) & ATMEL_US_TXRDY))
 		barrier();
-	writel(c, UART_BASE + ATMEL_US_THR);
+	writel(c, CONFIG_DEBUG_AT91_UART_BASE + ATMEL_US_THR);
 
-	while (!(readl(UART_BASE + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
+	while (!(readl(CONFIG_DEBUG_AT91_UART_BASE + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
 		barrier();
 }
 #endif
diff --git a/common/Kconfig b/common/Kconfig
index 7832df5c554f..2f30b2acf890 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -1168,6 +1168,13 @@ config DEBUG_RPI1_UART
 	  Say Y here if you want low-level debugging support on
 	  RaspberryPi 1 boards.
 
+config DEBUG_AT91_UART
+	bool "AT91 Debug UART"
+	depends on ARCH_AT91
+	help
+	  Say Y here if you want barebox low-level debugging support
+	  on AT91 based platforms.
+
 config DEBUG_RPI2_3_UART
 	bool "RaspberryPi 2/3 PL011 UART"
 	depends on ARCH_BCM283X
@@ -1238,6 +1245,7 @@ config DEBUG_SOCFPGA_UART_CLOCK
 	help
 	  Choose UART root clock.
 
+
 config DEBUG_LAYERSCAPE_UART_PORT
 	int "Layerscape UART port selection"
 	depends on ARCH_LAYERSCAPE
@@ -1246,6 +1254,19 @@ config DEBUG_LAYERSCAPE_UART_PORT
 	  Select the UART port number used for early debugging here. Port
 	  numbers start counting from 1.
 
+config DEBUG_AT91_UART_BASE
+	hex "AT91 Debug UART Port Selection" if DEBUG_AT91_UART
+	default 0xfffff200 if SOC_AT91RM9200  || SOC_AT91SAM9260 \
+	                   || SOC_AT91SAM9261 || SOC_AT91SAM9X5  \
+			   || SOC_AT91SAM9N12
+	default 0xffffee00 if SOC_AT91SAM9263 || SOC_AT91SAM9G45 || ARCH_SAMA5D3
+	default 0xfc069000 if ARCH_SAMA5D4
+	default 0xfffff200
+	depends on ARCH_AT91
+	help
+	  Specify UART port base address on which barebox low-level
+	  debug messages should be output.
+
 config DEBUG_INITCALLS
 	bool "Trace initcalls"
 	help
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v2 03/10] arm: sama5d4: fix stack setup

[Ahmad Fatoum]

From: Sam Ravnborg <sam@ravnborg.org>

The code that configure the stack uses sama5d3 constants.
Fix this to use the proper sama5d4 constants.

Boot tested on sama5d4_xplained.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/arm/boards/sama5d4_xplained/lowlevel.c | 2 +-
 arch/arm/boards/sama5d4ek/lowlevel.c        | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boards/sama5d4_xplained/lowlevel.c b/arch/arm/boards/sama5d4_xplained/lowlevel.c
index 0e25270142f2..8ae4e6e0d237 100644
--- a/arch/arm/boards/sama5d4_xplained/lowlevel.c
+++ b/arch/arm/boards/sama5d4_xplained/lowlevel.c
@@ -17,7 +17,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 {
 	arm_cpu_lowlevel_init();
 
-	arm_setup_stack(SAMA5D3_SRAM_BASE + SAMA5D3_SRAM_SIZE - 16);
+	arm_setup_stack(SAMA5D4_SRAM_BASE + SAMA5D4_SRAM_SIZE - 16);
 
 	barebox_arm_entry(SAMA5_DDRCS, at91sama5_get_ddram_size(), NULL);
 }
diff --git a/arch/arm/boards/sama5d4ek/lowlevel.c b/arch/arm/boards/sama5d4ek/lowlevel.c
index 0e25270142f2..8ae4e6e0d237 100644
--- a/arch/arm/boards/sama5d4ek/lowlevel.c
+++ b/arch/arm/boards/sama5d4ek/lowlevel.c
@@ -17,7 +17,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 {
 	arm_cpu_lowlevel_init();
 
-	arm_setup_stack(SAMA5D3_SRAM_BASE + SAMA5D3_SRAM_SIZE - 16);
+	arm_setup_stack(SAMA5D4_SRAM_BASE + SAMA5D4_SRAM_SIZE - 16);
 
 	barebox_arm_entry(SAMA5_DDRCS, at91sama5_get_ddram_size(), NULL);
 }
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v2 04/10] ARM: at91: fix at91sama5_get_ddram_size for sama5d4

[Ahmad Fatoum]

at91sama5_get_ddram_size() is despite the name specific to the
sama5d3 which it was added alongside of. sama5d4 board code continues
to use it, but accessing SAMA5D3_BASE_MPDDRC (0xffffea00) on
a sama5d4 should result in a Data Abort (Datasheet Figure 5-1)..

Fix this by giving at91sama5_get_ddram_size the mpddrc base
address as argument and adjust call sites appropriately.

This change was not tested on a sama5d4.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/arm/boards/sama5d3_xplained/lowlevel.c       | 2 +-
 arch/arm/boards/sama5d3xek/lowlevel.c             | 2 +-
 arch/arm/boards/sama5d4_xplained/lowlevel.c       | 2 +-
 arch/arm/boards/sama5d4ek/lowlevel.c              | 2 +-
 arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h | 6 ++----
 arch/arm/mach-at91/sama5d3_devices.c              | 2 +-
 arch/arm/mach-at91/sama5d4_devices.c              | 2 +-
 7 files changed, 8 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boards/sama5d3_xplained/lowlevel.c b/arch/arm/boards/sama5d3_xplained/lowlevel.c
index 0e25270142f2..92dd515ca64e 100644
--- a/arch/arm/boards/sama5d3_xplained/lowlevel.c
+++ b/arch/arm/boards/sama5d3_xplained/lowlevel.c
@@ -19,5 +19,5 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 
 	arm_setup_stack(SAMA5D3_SRAM_BASE + SAMA5D3_SRAM_SIZE - 16);
 
-	barebox_arm_entry(SAMA5_DDRCS, at91sama5_get_ddram_size(), NULL);
+	barebox_arm_entry(SAMA5_DDRCS, at91sama5_get_ddram_size(IOMEM(SAMA5D3_BASE_MPDDRC)), NULL);
 }
diff --git a/arch/arm/boards/sama5d3xek/lowlevel.c b/arch/arm/boards/sama5d3xek/lowlevel.c
index 0e25270142f2..92dd515ca64e 100644
--- a/arch/arm/boards/sama5d3xek/lowlevel.c
+++ b/arch/arm/boards/sama5d3xek/lowlevel.c
@@ -19,5 +19,5 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 
 	arm_setup_stack(SAMA5D3_SRAM_BASE + SAMA5D3_SRAM_SIZE - 16);
 
-	barebox_arm_entry(SAMA5_DDRCS, at91sama5_get_ddram_size(), NULL);
+	barebox_arm_entry(SAMA5_DDRCS, at91sama5_get_ddram_size(IOMEM(SAMA5D3_BASE_MPDDRC)), NULL);
 }
diff --git a/arch/arm/boards/sama5d4_xplained/lowlevel.c b/arch/arm/boards/sama5d4_xplained/lowlevel.c
index 8ae4e6e0d237..168d424baee7 100644
--- a/arch/arm/boards/sama5d4_xplained/lowlevel.c
+++ b/arch/arm/boards/sama5d4_xplained/lowlevel.c
@@ -19,5 +19,5 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 
 	arm_setup_stack(SAMA5D4_SRAM_BASE + SAMA5D4_SRAM_SIZE - 16);
 
-	barebox_arm_entry(SAMA5_DDRCS, at91sama5_get_ddram_size(), NULL);
+	barebox_arm_entry(SAMA5_DDRCS, at91sama5_get_ddram_size(IOMEM(SAMA5D4_BASE_MPDDRC)), NULL);
 }
diff --git a/arch/arm/boards/sama5d4ek/lowlevel.c b/arch/arm/boards/sama5d4ek/lowlevel.c
index 8ae4e6e0d237..168d424baee7 100644
--- a/arch/arm/boards/sama5d4ek/lowlevel.c
+++ b/arch/arm/boards/sama5d4ek/lowlevel.c
@@ -19,5 +19,5 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 
 	arm_setup_stack(SAMA5D4_SRAM_BASE + SAMA5D4_SRAM_SIZE - 16);
 
-	barebox_arm_entry(SAMA5_DDRCS, at91sama5_get_ddram_size(), NULL);
+	barebox_arm_entry(SAMA5_DDRCS, at91sama5_get_ddram_size(IOMEM(SAMA5D4_BASE_MPDDRC)), NULL);
 }
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
index b0c003cd1e05..a775d3b19691 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
@@ -222,13 +222,11 @@ static inline u32 at91sam9n12_get_ddram_size(void)
 #endif
 
 #ifdef CONFIG_SOC_SAMA5
-#include <mach/sama5d3.h>
-static inline u32 at91sama5_get_ddram_size(void)
+static inline u32 at91sama5_get_ddram_size(void __iomem *base)
 {
 	u32 cr;
 	u32 mdr;
 	u32 size;
-	void * __iomem base = IOMEM(SAMA5D3_BASE_MPDDRC);
 
 	cr = readl(base + AT91_DDRSDRC_CR);
 	mdr = readl(base + AT91_DDRSDRC_MDR);
@@ -253,7 +251,7 @@ static inline u32 at91sama5_get_ddram_size(void)
 	return size;
 }
 #else
-static inline u32 at91sama5_get_ddram_size(void)
+static inline u32 at91sama5_get_ddram_size(void __iomem *base)
 {
 	return 0;
 }
diff --git a/arch/arm/mach-at91/sama5d3_devices.c b/arch/arm/mach-at91/sama5d3_devices.c
index f5075b39374f..b61d2b309ce0 100644
--- a/arch/arm/mach-at91/sama5d3_devices.c
+++ b/arch/arm/mach-at91/sama5d3_devices.c
@@ -28,7 +28,7 @@
 void at91_add_device_sdram(u32 size)
 {
 	if (!size)
-		size = at91sama5_get_ddram_size();
+		size = at91sama5_get_ddram_size(IOMEM(SAMA5D3_BASE_MPDDRC));
 
 	arm_add_mem_device("ram0", SAMA5_DDRCS, size);
 	add_mem_device("sram0", SAMA5D3_SRAM_BASE,
diff --git a/arch/arm/mach-at91/sama5d4_devices.c b/arch/arm/mach-at91/sama5d4_devices.c
index 4064e4441f9f..546d0888bfd8 100644
--- a/arch/arm/mach-at91/sama5d4_devices.c
+++ b/arch/arm/mach-at91/sama5d4_devices.c
@@ -29,7 +29,7 @@
 void at91_add_device_sdram(u32 size)
 {
 	if (!size)
-		size = at91sama5_get_ddram_size();
+		size = at91sama5_get_ddram_size(IOMEM(SAMA5D4_BASE_MPDDRC));
 
 	arm_add_mem_device("ram0", SAMA5_DDRCS, size);
 	add_mem_device("sram0", SAMA5D4_SRAM_BASE,
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v2 05/10] ARM: at91: remove duplicate get_ddram_size code

[Ahmad Fatoum]

Both at91_get_ddram_size and at91sama5_get_ddram_size are the
same if is_sdram == false and is_nb == true.

is_sdram is always false, because according to the sama5d{2,3,4}
datasheets, the lowest possible value for AT91_DDRSDRC_MD is 3
(i.e. none of them supports SDR SDRAM).

Therefore have at91sama5_get_ddram_size call at91_get_ddram_size
with is_nb == true and remove the duplicate code.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
---
 .../mach-at91/include/mach/at91sam9_ddrsdr.h  | 27 ++-----------------
 1 file changed, 2 insertions(+), 25 deletions(-)

diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
index a775d3b19691..795eb0ce9a9f 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
@@ -148,6 +148,7 @@ static inline u32 at91_get_ddram_size(void * __iomem base, bool is_nb)
 	cr = readl(base + AT91_DDRSDRC_CR);
 	mdr = readl(base + AT91_DDRSDRC_MDR);
 
+	/* will always be false for sama5d2, sama5d3 or sama5d4 */
 	is_sdram = (mdr & AT91_DDRSDRC_MD) <= AT91_DDRSDRC_MD_LOW_POWER_SDR;
 
 	/* Formula:
@@ -224,31 +225,7 @@ static inline u32 at91sam9n12_get_ddram_size(void)
 #ifdef CONFIG_SOC_SAMA5
 static inline u32 at91sama5_get_ddram_size(void __iomem *base)
 {
-	u32 cr;
-	u32 mdr;
-	u32 size;
-
-	cr = readl(base + AT91_DDRSDRC_CR);
-	mdr = readl(base + AT91_DDRSDRC_MDR);
-
-	/* Formula:
-	 * size = bank << (col + row + 1);
-	 * if (bandwidth == 32 bits)
-	 *	size <<= 1;
-	 */
-	size = 1;
-	/* COL */
-	size += (cr & AT91_DDRSDRC_NC) + 9;
-	/* ROW */
-	size += ((cr & AT91_DDRSDRC_NR) >> 2) + 11;
-	/* BANK */
-	size = ((cr & AT91_DDRSDRC_NB) ? 8 : 4) << size;
-
-	/* bandwidth */
-	if (!(mdr & AT91_DDRSDRC_DBW))
-		size <<= 1;
-
-	return size;
+	return at91_get_ddram_size(base, true);
 }
 #else
 static inline u32 at91sama5_get_ddram_size(void __iomem *base)
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v2 06/10] ARM: at91: remove at91sam9g45_get_ddram_size helper

[Ahmad Fatoum]

Substitute the current #ifdefery in at91sam9_ddrsdr.h by
open-coding at91sam9g45_get_ddram_size wherever it was called.

Suggested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 arch/arm/boards/at91sam9m10g45ek/lowlevel.c   |  5 +++--
 arch/arm/boards/at91sam9m10ihd/lowlevel.c     |  5 +++--
 arch/arm/boards/pm9g45/lowlevel.c             |  5 +++--
 arch/arm/mach-at91/at91sam9g45_devices.c      |  2 +-
 .../mach-at91/include/mach/at91sam9_ddrsdr.h  | 20 -------------------
 5 files changed, 10 insertions(+), 27 deletions(-)

diff --git a/arch/arm/boards/at91sam9m10g45ek/lowlevel.c b/arch/arm/boards/at91sam9m10g45ek/lowlevel.c
index 1d83cdf0bfe1..d5deedfc37b5 100644
--- a/arch/arm/boards/at91sam9m10g45ek/lowlevel.c
+++ b/arch/arm/boards/at91sam9m10g45ek/lowlevel.c
@@ -19,6 +19,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 
 	arm_setup_stack(AT91SAM9G45_SRAM_BASE + AT91SAM9G45_SRAM_SIZE - 16);
 
-	barebox_arm_entry(AT91_CHIPSELECT_6, at91sam9g45_get_ddram_size(1),
-	                  NULL);
+	barebox_arm_entry(AT91_CHIPSELECT_6, 
+			at91_get_ddram_size(IOMEM(AT91SAM9G45_BASE_DDRSDRC1), false),
+			NULL);
 }
diff --git a/arch/arm/boards/at91sam9m10ihd/lowlevel.c b/arch/arm/boards/at91sam9m10ihd/lowlevel.c
index 4ccbb9355745..24d41cfa70ea 100644
--- a/arch/arm/boards/at91sam9m10ihd/lowlevel.c
+++ b/arch/arm/boards/at91sam9m10ihd/lowlevel.c
@@ -20,6 +20,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 
 	arm_setup_stack(AT91SAM9G45_SRAM_BASE + AT91SAM9G45_SRAM_SIZE - 16);
 
-	barebox_arm_entry(AT91_CHIPSELECT_6, at91sam9g45_get_ddram_size(1),
-	                  NULL);
+	barebox_arm_entry(AT91_CHIPSELECT_6,
+			at91_get_ddram_size(IOMEM(AT91SAM9G45_BASE_DDRSDRC1), false),
+			NULL);
 }
diff --git a/arch/arm/boards/pm9g45/lowlevel.c b/arch/arm/boards/pm9g45/lowlevel.c
index 12cf950685c6..fbf2b655c708 100644
--- a/arch/arm/boards/pm9g45/lowlevel.c
+++ b/arch/arm/boards/pm9g45/lowlevel.c
@@ -19,6 +19,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 
 	arm_setup_stack(AT91SAM9G45_SRAM_BASE + AT91SAM9G45_SRAM_SIZE - 16);
 
-	barebox_arm_entry(AT91_CHIPSELECT_6, at91sam9g45_get_ddram_size(1),
-	                  NULL);
+	barebox_arm_entry(AT91_CHIPSELECT_6, 
+			at91_get_ddram_size(IOMEM(AT91SAM9G45_BASE_DDRSDRC1), false),
+			NULL);
 }
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 43d8d5fbd6a2..df0c8a4e4f4e 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -28,7 +28,7 @@
 void at91_add_device_sdram(u32 size)
 {
 	if (!size)
-		size = at91sam9g45_get_ddram_size(1);
+		size = at91_get_ddram_size(IOMEM(AT91SAM9G45_BASE_DDRSDRC1), false);
 
 	arm_add_mem_device("ram0", AT91_CHIPSELECT_6, size);
 	add_mem_device("sram0", AT91SAM9G45_SRAM_BASE,
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
index 795eb0ce9a9f..9f1a2c78ff46 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
@@ -176,26 +176,6 @@ static inline u32 at91_get_ddram_size(void * __iomem base, bool is_nb)
 	return size;
 }
 
-#ifdef CONFIG_SOC_AT91SAM9G45
-#include <mach/at91sam9g45.h>
-static inline u32 at91sam9g45_get_ddram_size(int bank)
-{
-	switch (bank) {
-	case 0:
-		return at91_get_ddram_size(IOMEM(AT91SAM9G45_BASE_DDRSDRC0), false);
-	case 1:
-		return at91_get_ddram_size(IOMEM(AT91SAM9G45_BASE_DDRSDRC1), false);
-	default:
-		return 0;
-	}
-}
-#else
-static inline u32 at91sam9g45_get_ddram_size(int bank)
-{
-	return 0;
-}
-#endif
-
 #ifdef CONFIG_SOC_AT91SAM9X5
 #include <mach/at91sam9x5.h>
 static inline u32 at91sam9x5_get_ddram_size(void)
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v2 07/10] ARM: at91: remove at91sam9n12_get_ddram_size helper

[Ahmad Fatoum]

Substitute the current #ifdefery in at91sam9_ddrsdr.h by
open-coding at91sam9n12_get_ddram_size wherever it was called.

Suggested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 arch/arm/boards/at91sam9n12ek/lowlevel.c          |  5 +++--
 arch/arm/mach-at91/at91sam9n12_devices.c          |  2 +-
 arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h | 13 -------------
 3 files changed, 4 insertions(+), 16 deletions(-)

diff --git a/arch/arm/boards/at91sam9n12ek/lowlevel.c b/arch/arm/boards/at91sam9n12ek/lowlevel.c
index f57e439b9ec5..094fd941bc8c 100644
--- a/arch/arm/boards/at91sam9n12ek/lowlevel.c
+++ b/arch/arm/boards/at91sam9n12ek/lowlevel.c
@@ -19,6 +19,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 
 	arm_setup_stack(AT91SAM9N12_SRAM_BASE + AT91SAM9N12_SRAM_SIZE - 16);
 
-	barebox_arm_entry(AT91_CHIPSELECT_1, at91sam9n12_get_ddram_size(),
-	                  NULL);
+	barebox_arm_entry(AT91_CHIPSELECT_1,
+			at91_get_ddram_size(IOMEM(AT91SAM9N12_BASE_DDRSDRC0), true),
+			NULL);
 }
diff --git a/arch/arm/mach-at91/at91sam9n12_devices.c b/arch/arm/mach-at91/at91sam9n12_devices.c
index 43cbb79af4a5..3ee07568f2c7 100644
--- a/arch/arm/mach-at91/at91sam9n12_devices.c
+++ b/arch/arm/mach-at91/at91sam9n12_devices.c
@@ -28,7 +28,7 @@
 void at91_add_device_sdram(u32 size)
 {
 	if (!size)
-		size = at91sam9n12_get_ddram_size();
+		size = at91_get_ddram_size(IOMEM(AT91SAM9N12_BASE_DDRSDRC0), true);
 
 	arm_add_mem_device("ram0", AT91_CHIPSELECT_1, size);
 	add_mem_device("sram0", AT91SAM9N12_SRAM_BASE,
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
index 9f1a2c78ff46..f9c908fc38b0 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
@@ -189,19 +189,6 @@ static inline u32 at91sam9x5_get_ddram_size(void)
 }
 #endif
 
-#ifdef CONFIG_SOC_AT91SAM9N12
-#include <mach/at91sam9n12.h>
-static inline u32 at91sam9n12_get_ddram_size(void)
-{
-	return at91_get_ddram_size(IOMEM(AT91SAM9N12_BASE_DDRSDRC0), true);
-}
-#else
-static inline u32 at91sam9n12_get_ddram_size(void)
-{
-	return 0;
-}
-#endif
-
 #ifdef CONFIG_SOC_SAMA5
 static inline u32 at91sama5_get_ddram_size(void __iomem *base)
 {
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v2 08/10] ARM: at91: remove at91sam9x5_get_ddram_size helper

[Ahmad Fatoum]

Substitute the current #ifdefery in at91sam9_ddrsdr.h by
open-coding at91sam9x5_get_ddram_size wherever it was called.

Suggested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 arch/arm/boards/at91sam9x5ek/lowlevel.c           |  4 +++-
 arch/arm/mach-at91/at91sam9x5_devices.c           |  2 +-
 arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h | 13 -------------
 3 files changed, 4 insertions(+), 15 deletions(-)

diff --git a/arch/arm/boards/at91sam9x5ek/lowlevel.c b/arch/arm/boards/at91sam9x5ek/lowlevel.c
index 9aa0e8ba9b2b..14c239408d6a 100644
--- a/arch/arm/boards/at91sam9x5ek/lowlevel.c
+++ b/arch/arm/boards/at91sam9x5ek/lowlevel.c
@@ -17,5 +17,7 @@ ENTRY_FUNCTION(start_at91sam9x5ek, r0, r1, r2)
 
 	fdt = __dtb_at91sam9x5ek_start + get_runtime_offset();
 
-	barebox_arm_entry(AT91_CHIPSELECT_1, at91sam9x5_get_ddram_size(), fdt);
+	barebox_arm_entry(AT91_CHIPSELECT_1,
+			at91_get_ddram_size(IOMEM(AT91SAM9X5_BASE_DDRSDRC0), true),
+			fdt);
 }
diff --git a/arch/arm/mach-at91/at91sam9x5_devices.c b/arch/arm/mach-at91/at91sam9x5_devices.c
index ab506a1f4236..f794d9ae8f73 100644
--- a/arch/arm/mach-at91/at91sam9x5_devices.c
+++ b/arch/arm/mach-at91/at91sam9x5_devices.c
@@ -27,7 +27,7 @@
 void at91_add_device_sdram(u32 size)
 {
 	if (!size)
-		size = at91sam9x5_get_ddram_size();
+		size = at91_get_ddram_size(IOMEM(AT91SAM9X5_BASE_DDRSDRC0), true);
 
 	arm_add_mem_device("ram0", AT91_CHIPSELECT_1, size);
 	add_mem_device("sram0", AT91SAM9X5_SRAM_BASE,
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
index f9c908fc38b0..cc3affa17a61 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
@@ -176,19 +176,6 @@ static inline u32 at91_get_ddram_size(void * __iomem base, bool is_nb)
 	return size;
 }
 
-#ifdef CONFIG_SOC_AT91SAM9X5
-#include <mach/at91sam9x5.h>
-static inline u32 at91sam9x5_get_ddram_size(void)
-{
-	return at91_get_ddram_size(IOMEM(AT91SAM9X5_BASE_DDRSDRC0), true);
-}
-#else
-static inline u32 at91sam9x5_get_ddram_size(void)
-{
-	return 0;
-}
-#endif
-
 #ifdef CONFIG_SOC_SAMA5
 static inline u32 at91sama5_get_ddram_size(void __iomem *base)
 {
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v2 09/10] ARM: at91: remove at91sama5_get_ddram_size helper

[Ahmad Fatoum]

Substitute the current #ifdefery in at91sam9_ddrsdr.h by
open-coding at91sama5_get_ddram_size wherever it was called.

Suggested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 arch/arm/boards/sama5d3_xplained/lowlevel.c       |  4 +++-
 arch/arm/boards/sama5d3xek/lowlevel.c             |  4 +++-
 arch/arm/boards/sama5d4_xplained/lowlevel.c       |  4 +++-
 arch/arm/boards/sama5d4ek/lowlevel.c              |  4 +++-
 arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h | 12 ------------
 arch/arm/mach-at91/sama5d3_devices.c              |  2 +-
 arch/arm/mach-at91/sama5d4_devices.c              |  2 +-
 7 files changed, 14 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boards/sama5d3_xplained/lowlevel.c b/arch/arm/boards/sama5d3_xplained/lowlevel.c
index 92dd515ca64e..31c176a3a4c2 100644
--- a/arch/arm/boards/sama5d3_xplained/lowlevel.c
+++ b/arch/arm/boards/sama5d3_xplained/lowlevel.c
@@ -19,5 +19,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 
 	arm_setup_stack(SAMA5D3_SRAM_BASE + SAMA5D3_SRAM_SIZE - 16);
 
-	barebox_arm_entry(SAMA5_DDRCS, at91sama5_get_ddram_size(IOMEM(SAMA5D3_BASE_MPDDRC)), NULL);
+	barebox_arm_entry(SAMA5_DDRCS,
+			at91_get_ddram_size(IOMEM(SAMA5D3_BASE_MPDDRC), true),
+			NULL);
 }
diff --git a/arch/arm/boards/sama5d3xek/lowlevel.c b/arch/arm/boards/sama5d3xek/lowlevel.c
index 92dd515ca64e..31c176a3a4c2 100644
--- a/arch/arm/boards/sama5d3xek/lowlevel.c
+++ b/arch/arm/boards/sama5d3xek/lowlevel.c
@@ -19,5 +19,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 
 	arm_setup_stack(SAMA5D3_SRAM_BASE + SAMA5D3_SRAM_SIZE - 16);
 
-	barebox_arm_entry(SAMA5_DDRCS, at91sama5_get_ddram_size(IOMEM(SAMA5D3_BASE_MPDDRC)), NULL);
+	barebox_arm_entry(SAMA5_DDRCS,
+			at91_get_ddram_size(IOMEM(SAMA5D3_BASE_MPDDRC), true),
+			NULL);
 }
diff --git a/arch/arm/boards/sama5d4_xplained/lowlevel.c b/arch/arm/boards/sama5d4_xplained/lowlevel.c
index 168d424baee7..47cadfe6750c 100644
--- a/arch/arm/boards/sama5d4_xplained/lowlevel.c
+++ b/arch/arm/boards/sama5d4_xplained/lowlevel.c
@@ -19,5 +19,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 
 	arm_setup_stack(SAMA5D4_SRAM_BASE + SAMA5D4_SRAM_SIZE - 16);
 
-	barebox_arm_entry(SAMA5_DDRCS, at91sama5_get_ddram_size(IOMEM(SAMA5D4_BASE_MPDDRC)), NULL);
+	barebox_arm_entry(SAMA5_DDRCS,
+			at91_get_ddram_size(IOMEM(SAMA5D4_BASE_MPDDRC), true),
+			NULL);
 }
diff --git a/arch/arm/boards/sama5d4ek/lowlevel.c b/arch/arm/boards/sama5d4ek/lowlevel.c
index 168d424baee7..47cadfe6750c 100644
--- a/arch/arm/boards/sama5d4ek/lowlevel.c
+++ b/arch/arm/boards/sama5d4ek/lowlevel.c
@@ -19,5 +19,7 @@ void __naked __bare_init barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 
 	arm_setup_stack(SAMA5D4_SRAM_BASE + SAMA5D4_SRAM_SIZE - 16);
 
-	barebox_arm_entry(SAMA5_DDRCS, at91sama5_get_ddram_size(IOMEM(SAMA5D4_BASE_MPDDRC)), NULL);
+	barebox_arm_entry(SAMA5_DDRCS,
+			at91_get_ddram_size(IOMEM(SAMA5D4_BASE_MPDDRC), true),
+			NULL);
 }
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
index cc3affa17a61..b50c11b128bf 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
@@ -176,18 +176,6 @@ static inline u32 at91_get_ddram_size(void * __iomem base, bool is_nb)
 	return size;
 }
 
-#ifdef CONFIG_SOC_SAMA5
-static inline u32 at91sama5_get_ddram_size(void __iomem *base)
-{
-	return at91_get_ddram_size(base, true);
-}
-#else
-static inline u32 at91sama5_get_ddram_size(void __iomem *base)
-{
-	return 0;
-}
-#endif
-
 #endif
 
 #endif
diff --git a/arch/arm/mach-at91/sama5d3_devices.c b/arch/arm/mach-at91/sama5d3_devices.c
index b61d2b309ce0..479e81f0f588 100644
--- a/arch/arm/mach-at91/sama5d3_devices.c
+++ b/arch/arm/mach-at91/sama5d3_devices.c
@@ -28,7 +28,7 @@
 void at91_add_device_sdram(u32 size)
 {
 	if (!size)
-		size = at91sama5_get_ddram_size(IOMEM(SAMA5D3_BASE_MPDDRC));
+		size = at91_get_ddram_size(IOMEM(SAMA5D3_BASE_MPDDRC), true),
 
 	arm_add_mem_device("ram0", SAMA5_DDRCS, size);
 	add_mem_device("sram0", SAMA5D3_SRAM_BASE,
diff --git a/arch/arm/mach-at91/sama5d4_devices.c b/arch/arm/mach-at91/sama5d4_devices.c
index 546d0888bfd8..4a6683981595 100644
--- a/arch/arm/mach-at91/sama5d4_devices.c
+++ b/arch/arm/mach-at91/sama5d4_devices.c
@@ -29,7 +29,7 @@
 void at91_add_device_sdram(u32 size)
 {
 	if (!size)
-		size = at91sama5_get_ddram_size(IOMEM(SAMA5D4_BASE_MPDDRC));
+		size = at91_get_ddram_size(IOMEM(SAMA5D4_BASE_MPDDRC), true);
 
 	arm_add_mem_device("ram0", SAMA5_DDRCS, size);
 	add_mem_device("sram0", SAMA5D4_SRAM_BASE,
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v2 10/10] clk: at91: fix warning about missing const-safety

[Ahmad Fatoum]

compiling clk-main.c results in:

warning: passing argument 1 of 'memcpy' discards 'const' qualifier from
pointer target type [-Wdiscarded-qualifiers]
  memcpy(clkmain->clk.parent_names, parent_names, parents_array_size);
           ~~~~~~~~~~~~^~~~~~~~~~~~~

Avoid this by replacing the xzalloc+memcpy pair with xmemdup.
Zero-initialization of the buffer isn't necessary, because
memcpy spans the whole buffer.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 drivers/clk/at91/clk-main.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
index 4d4127dd0016..abae35566c2f 100644
--- a/drivers/clk/at91/clk-main.c
+++ b/drivers/clk/at91/clk-main.c
@@ -455,8 +455,7 @@ at91_clk_register_sam9x5_main(struct regmap *regmap,
 	clkmain->clk.name = name;
 	clkmain->clk.ops = &sam9x5_main_ops;
 	parents_array_size = num_parents * sizeof (clkmain->clk.parent_names[0]);
-	clkmain->clk.parent_names = xzalloc(parents_array_size);
-	memcpy(clkmain->clk.parent_names, parent_names, parents_array_size);
+	clkmain->clk.parent_names = xmemdup(parent_names, parents_array_size);
 	clkmain->clk.num_parents = num_parents;
 
 	/* init.flags = CLK_SET_PARENT_GATE; */
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH v2 06/10] ARM: at91: remove at91sam9g45_get_ddram_size helper

[Sam Ravnborg]

On Mon, Apr 01, 2019 at 11:31:02AM +0200, Ahmad Fatoum wrote:
> Substitute the current #ifdefery in at91sam9_ddrsdr.h by
> open-coding at91sam9g45_get_ddram_size wherever it was called.
> 
> Suggested-by: Sascha Hauer <s.hauer@pengutronix.de>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH v2 07/10] ARM: at91: remove at91sam9n12_get_ddram_size helper

[Sam Ravnborg]

On Mon, Apr 01, 2019 at 11:31:03AM +0200, Ahmad Fatoum wrote:
> Substitute the current #ifdefery in at91sam9_ddrsdr.h by
> open-coding at91sam9n12_get_ddram_size wherever it was called.
> 
> Suggested-by: Sascha Hauer <s.hauer@pengutronix.de>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH v2 08/10] ARM: at91: remove at91sam9x5_get_ddram_size helper

[Sam Ravnborg]

On Mon, Apr 01, 2019 at 11:31:04AM +0200, Ahmad Fatoum wrote:
> Substitute the current #ifdefery in at91sam9_ddrsdr.h by
> open-coding at91sam9x5_get_ddram_size wherever it was called.
> 
> Suggested-by: Sascha Hauer <s.hauer@pengutronix.de>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH v2 09/10] ARM: at91: remove at91sama5_get_ddram_size helper

[Sam Ravnborg]

On Mon, Apr 01, 2019 at 11:31:05AM +0200, Ahmad Fatoum wrote:
> Substitute the current #ifdefery in at91sam9_ddrsdr.h by
> open-coding at91sama5_get_ddram_size wherever it was called.
> 
> Suggested-by: Sascha Hauer <s.hauer@pengutronix.de>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH v2 10/10] clk: at91: fix warning about missing const-safety

[Sam Ravnborg]

Hi Ahmad.

On Mon, Apr 01, 2019 at 11:31:06AM +0200, Ahmad Fatoum wrote:
> compiling clk-main.c results in:
> 
> warning: passing argument 1 of 'memcpy' discards 'const' qualifier from
> pointer target type [-Wdiscarded-qualifiers]
>   memcpy(clkmain->clk.parent_names, parent_names, parents_array_size);
>            ~~~~~~~~~~~~^~~~~~~~~~~~~
> 
> Avoid this by replacing the xzalloc+memcpy pair with xmemdup.
> Zero-initialization of the buffer isn't necessary, because
> memcpy spans the whole buffer.
> 
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

It looks like clk-generated.c would suffer from the same
if you managed to build it.
Could you maybe verify and fix this too?

	Sam

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH v2 11/10] clk: at91: fix warning about missing const-safety

[Ahmad Fatoum]

compiling clk-generated.c results in:

warning: passing argument 1 of 'memcpy' discards 'const' qualifier from
pointer target type [-Wdiscarded-qualifiers]
  memcpy(gck->hw.parent_names, parent_names, parents_array_size);
         ~~~~~~~^~~~~~~~~~~~~

Avoid this by replacing the xzalloc+memcpy pair with xmemdup.
Zero-initialization of the buffer isn't necessary, because
memcpy spans the whole buffer.

Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 drivers/clk/at91/clk-generated.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
index 60516ca10f36..396c35f3a7b3 100644
--- a/drivers/clk/at91/clk-generated.c
+++ b/drivers/clk/at91/clk-generated.c
@@ -181,8 +181,7 @@ at91_clk_register_generated(struct regmap *regmap,
 	gck->hw.ops = &generated_ops;
 
 	parents_array_size = num_parents * sizeof(gck->hw.parent_names[0]);
-	gck->hw.parent_names = xzalloc(parents_array_size);
-	memcpy(gck->hw.parent_names, parent_names, parents_array_size);
+	gck->hw.parent_names = xmemdup(parent_names, parents_array_size);
 	gck->hw.num_parents = num_parents;
 
 	/* gck->hw.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE; */
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH v2 10/10] clk: at91: fix warning about missing const-safety

[Ahmad Fatoum]

Hello Sam,

On 1/4/19 22:48, Sam Ravnborg wrote:
> Hi Ahmad.
> 
> On Mon, Apr 01, 2019 at 11:31:06AM +0200, Ahmad Fatoum wrote:
>> compiling clk-main.c results in:
>>
>> warning: passing argument 1 of 'memcpy' discards 'const' qualifier from
>> pointer target type [-Wdiscarded-qualifiers]
>>   memcpy(clkmain->clk.parent_names, parent_names, parents_array_size);
>>            ~~~~~~~~~~~~^~~~~~~~~~~~~
>>
>> Avoid this by replacing the xzalloc+memcpy pair with xmemdup.
>> Zero-initialization of the buffer isn't necessary, because
>> memcpy spans the whole buffer.
>>
>> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> 
> It looks like clk-generated.c would suffer from the same
> if you managed to build it.
> Could you maybe verify and fix this too?

Indeed. I've sent a patch as reply to this thread.

Cheers
Ahmad

> 
> 	Sam
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH v2 11/10] clk: at91: fix warning about missing const-safety

[Sam Ravnborg]

On Mon, Apr 01, 2019 at 11:34:27PM +0200, Ahmad Fatoum wrote:
> compiling clk-generated.c results in:
> 
> warning: passing argument 1 of 'memcpy' discards 'const' qualifier from
> pointer target type [-Wdiscarded-qualifiers]
>   memcpy(gck->hw.parent_names, parent_names, parents_array_size);
>          ~~~~~~~^~~~~~~~~~~~~
> 
> Avoid this by replacing the xzalloc+memcpy pair with xmemdup.
> Zero-initialization of the buffer isn't necessary, because
> memcpy spans the whole buffer.
> 
> Suggested-by: Sam Ravnborg <sam@ravnborg.org>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH v2 06/10] ARM: at91: remove at91sam9g45_get_ddram_size helper

[Sascha Hauer]

On Mon, Apr 01, 2019 at 11:31:02AM +0200, Ahmad Fatoum wrote:
> Substitute the current #ifdefery in at91sam9_ddrsdr.h by
> open-coding at91sam9g45_get_ddram_size wherever it was called.
> 
> Suggested-by: Sascha Hauer <s.hauer@pengutronix.de>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

> -#ifdef CONFIG_SOC_AT91SAM9G45
> -#include <mach/at91sam9g45.h>
> -static inline u32 at91sam9g45_get_ddram_size(int bank)
> -{
> -	switch (bank) {
> -	case 0:
> -		return at91_get_ddram_size(IOMEM(AT91SAM9G45_BASE_DDRSDRC0), false);
> -	case 1:
> -		return at91_get_ddram_size(IOMEM(AT91SAM9G45_BASE_DDRSDRC1), false);
> -	default:
> -		return 0;
> -	}
> -}
> -#else
> -static inline u32 at91sam9g45_get_ddram_size(int bank)
> -{
> -	return 0;
> -}
> -#endif

Indeed you can remove the #ifdefs, but wouldn't it look nicer just to
keep at91sam9g45_get_ddram_size() and friends?

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH v2 06/10] ARM: at91: remove at91sam9g45_get_ddram_size helper

[Ahmad Fatoum]

Hello,

On 3/4/19 09:18, Sascha Hauer wrote:
> Indeed you can remove the #ifdefs, but wouldn't it look nicer just to

I assume you mean adding a base address parameter, but have the helper
sets the second argument? Ye, I can do that.


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH v2 06/10] ARM: at91: remove at91sam9g45_get_ddram_size helper

[Sascha Hauer]

On Wed, Apr 03, 2019 at 11:56:28AM +0200, Ahmad Fatoum wrote:
> Hello,
> 
> On 3/4/19 09:18, Sascha Hauer wrote:
> > Indeed you can remove the #ifdefs, but wouldn't it look nicer just to
> 
> I assume you mean adding a base address parameter, but have the helper
> sets the second argument? Ye, I can do that.

No, I mean remove the ifdefs and only that.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox