From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from ns.lynxeye.de ([87.118.118.114] helo=lynxeye.de) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1hKSCB-0003lA-RE for barebox@lists.infradead.org; Sat, 27 Apr 2019 18:37:11 +0000 Received: from antimon.fritz.box (a89-183-44-132.net-htp.de [89.183.44.132]) by lynxeye.de (Postfix) with ESMTPA id 27A84E74217 for ; Sat, 27 Apr 2019 20:36:31 +0200 (CEST) From: Lucas Stach Date: Sat, 27 Apr 2019 20:36:24 +0200 Message-Id: <20190427183627.22549-2-l.stach@pengutronix.de> In-Reply-To: <20190427183627.22549-1-l.stach@pengutronix.de> References: <20190427183627.22549-1-l.stach@pengutronix.de> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 1/4] mci: add driver for BCM283x sdhost core To: barebox@lists.infradead.org The sdhost is a simple MMC controller found on the Broadcom BCM283x line of SoCs. The driver code was ported from U-Boot and then simplified a bit, by dropping a lot of the state tracking. Signed-off-by: Lucas Stach --- drivers/mci/Kconfig | 4 + drivers/mci/Makefile | 1 + drivers/mci/bcm2835-sdhost.c | 657 +++++++++++++++++++++++++++++++++++ 3 files changed, 662 insertions(+) create mode 100644 drivers/mci/bcm2835-sdhost.c diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig index 911cc0cb1e..08c8c84e8c 100644 --- a/drivers/mci/Kconfig +++ b/drivers/mci/Kconfig @@ -66,6 +66,10 @@ config MCI_BCM283X bool "MCI support for BCM283X" depends on ARCH_BCM283X +config MCI_BCM283X_SDHOST + bool "BCM283X sdhost" + depends on ARCH_BCM283X + config MCI_DOVE bool "Marvell Dove SDHCI" depends on ARCH_DOVE diff --git a/drivers/mci/Makefile b/drivers/mci/Makefile index f6214c0cbb..25a1d073dc 100644 --- a/drivers/mci/Makefile +++ b/drivers/mci/Makefile @@ -1,6 +1,7 @@ obj-$(CONFIG_MCI) += mci-core.o obj-$(CONFIG_MCI_ATMEL) += atmel_mci.o obj-$(CONFIG_MCI_BCM283X) += mci-bcm2835.o +obj-$(CONFIG_MCI_BCM283X_SDHOST) += bcm2835-sdhost.o obj-$(CONFIG_MCI_DOVE) += dove-sdhci.o obj-$(CONFIG_MCI_IMX) += imx.o obj-$(CONFIG_MCI_IMX_ESDHC) += imx-esdhc.o diff --git a/drivers/mci/bcm2835-sdhost.c b/drivers/mci/bcm2835-sdhost.c new file mode 100644 index 0000000000..bad155e07d --- /dev/null +++ b/drivers/mci/bcm2835-sdhost.c @@ -0,0 +1,657 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * This code is ported from U-Boot by Lucas Stach and + * has the following contributors listed in the original license header: + * Alexander Graf + * Phil Elwell + * Gellert Weisz + * Stephen Warren + * Oleksandr Tymoshenko + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define SDCMD 0x00 /* Command to SD card - 16 R/W */ +#define SDARG 0x04 /* Argument to SD card - 32 R/W */ +#define SDTOUT 0x08 /* Start value for timeout counter - 32 R/W */ +#define SDCDIV 0x0c /* Start value for clock divider - 11 R/W */ +#define SDRSP0 0x10 /* SD card response (31:0) - 32 R */ +#define SDRSP1 0x14 /* SD card response (63:32) - 32 R */ +#define SDRSP2 0x18 /* SD card response (95:64) - 32 R */ +#define SDRSP3 0x1c /* SD card response (127:96) - 32 R */ +#define SDHSTS 0x20 /* SD host status - 11 R/W */ +#define SDVDD 0x30 /* SD card power control - 1 R/W */ +#define SDEDM 0x34 /* Emergency Debug Mode - 13 R/W */ +#define SDHCFG 0x38 /* Host configuration - 2 R/W */ +#define SDHBCT 0x3c /* Host byte count (debug) - 32 R/W */ +#define SDDATA 0x40 /* Data to/from SD card - 32 R/W */ +#define SDHBLC 0x50 /* Host block count (SDIO/SDHC) - 9 R/W */ + +#define SDCMD_NEW_FLAG 0x8000 +#define SDCMD_FAIL_FLAG 0x4000 +#define SDCMD_BUSYWAIT 0x800 +#define SDCMD_NO_RESPONSE 0x400 +#define SDCMD_LONG_RESPONSE 0x200 +#define SDCMD_WRITE_CMD 0x80 +#define SDCMD_READ_CMD 0x40 +#define SDCMD_CMD_MASK 0x3f + +#define SDCDIV_MAX_CDIV 0x7ff + +#define SDHSTS_BUSY_IRPT 0x400 +#define SDHSTS_BLOCK_IRPT 0x200 +#define SDHSTS_SDIO_IRPT 0x100 +#define SDHSTS_REW_TIME_OUT 0x80 +#define SDHSTS_CMD_TIME_OUT 0x40 +#define SDHSTS_CRC16_ERROR 0x20 +#define SDHSTS_CRC7_ERROR 0x10 +#define SDHSTS_FIFO_ERROR 0x08 +#define SDHSTS_DATA_FLAG 0x01 + +#define SDHSTS_CLEAR_MASK (SDHSTS_BUSY_IRPT | \ + SDHSTS_BLOCK_IRPT | \ + SDHSTS_SDIO_IRPT | \ + SDHSTS_REW_TIME_OUT | \ + SDHSTS_CMD_TIME_OUT | \ + SDHSTS_CRC16_ERROR | \ + SDHSTS_CRC7_ERROR | \ + SDHSTS_FIFO_ERROR) + +#define SDHSTS_TRANSFER_ERROR_MASK (SDHSTS_CRC7_ERROR | \ + SDHSTS_CRC16_ERROR | \ + SDHSTS_REW_TIME_OUT | \ + SDHSTS_FIFO_ERROR) + +#define SDHSTS_ERROR_MASK (SDHSTS_CMD_TIME_OUT | \ + SDHSTS_TRANSFER_ERROR_MASK) + +#define SDHCFG_BUSY_IRPT_EN BIT(10) +#define SDHCFG_BLOCK_IRPT_EN BIT(8) +#define SDHCFG_SDIO_IRPT_EN BIT(5) +#define SDHCFG_DATA_IRPT_EN BIT(4) +#define SDHCFG_SLOW_CARD BIT(3) +#define SDHCFG_WIDE_EXT_BUS BIT(2) +#define SDHCFG_WIDE_INT_BUS BIT(1) +#define SDHCFG_REL_CMD_LINE BIT(0) + +#define SDVDD_POWER_OFF 0 +#define SDVDD_POWER_ON 1 + +#define SDEDM_FORCE_DATA_MODE BIT(19) +#define SDEDM_CLOCK_PULSE BIT(20) +#define SDEDM_BYPASS BIT(21) + +#define SDEDM_FIFO_FILL_SHIFT 4 +#define SDEDM_FIFO_FILL_MASK 0x1f +static u32 edm_fifo_fill(u32 edm) +{ + return (edm >> SDEDM_FIFO_FILL_SHIFT) & SDEDM_FIFO_FILL_MASK; +} + +#define SDEDM_WRITE_THRESHOLD_SHIFT 9 +#define SDEDM_READ_THRESHOLD_SHIFT 14 +#define SDEDM_THRESHOLD_MASK 0x1f + +#define SDEDM_FSM_MASK 0xf +#define SDEDM_FSM_IDENTMODE 0x0 +#define SDEDM_FSM_DATAMODE 0x1 +#define SDEDM_FSM_READDATA 0x2 +#define SDEDM_FSM_WRITEDATA 0x3 +#define SDEDM_FSM_READWAIT 0x4 +#define SDEDM_FSM_READCRC 0x5 +#define SDEDM_FSM_WRITECRC 0x6 +#define SDEDM_FSM_WRITEWAIT1 0x7 +#define SDEDM_FSM_POWERDOWN 0x8 +#define SDEDM_FSM_POWERUP 0x9 +#define SDEDM_FSM_WRITESTART1 0xa +#define SDEDM_FSM_WRITESTART2 0xb +#define SDEDM_FSM_GENPULSES 0xc +#define SDEDM_FSM_WRITEWAIT2 0xd +#define SDEDM_FSM_STARTPOWDOWN 0xf + +#define SDDATA_FIFO_WORDS 16 + +#define FIFO_READ_THRESHOLD 4 +#define FIFO_WRITE_THRESHOLD 4 +#define SDDATA_FIFO_PIO_BURST 8 + +#define SDHST_TIMEOUT_MAX_USEC 100000 + +struct bcm2835_host { + struct mci_host mci; + void __iomem *regs; + struct clk *clk; +}; +#define to_bcm2835_host(mci) container_of(mci, struct bcm2835_host, mci) + +static int bcm2835_sdhost_init(struct mci_host *mci, struct device_d *dev) +{ + struct bcm2835_host *host = to_bcm2835_host(mci); + u32 temp; + + writel(SDVDD_POWER_OFF, host->regs + SDVDD); + writel(0, host->regs + SDCMD); + writel(0, host->regs + SDARG); + /* Set timeout to a big enough value so we don't hit it */ + writel(0xf00000, host->regs + SDTOUT); + writel(0, host->regs + SDCDIV); + /* Clear status register */ + writel(SDHSTS_CLEAR_MASK, host->regs + SDHSTS); + writel(0, host->regs + SDHCFG); + writel(0, host->regs + SDHBCT); + writel(0, host->regs + SDHBLC); + + /* Limit fifo usage due to silicon bug */ + temp = readl(host->regs + SDEDM); + temp &= ~((SDEDM_THRESHOLD_MASK << SDEDM_READ_THRESHOLD_SHIFT) | + (SDEDM_THRESHOLD_MASK << SDEDM_WRITE_THRESHOLD_SHIFT)); + temp |= (FIFO_READ_THRESHOLD << SDEDM_READ_THRESHOLD_SHIFT) | + (FIFO_WRITE_THRESHOLD << SDEDM_WRITE_THRESHOLD_SHIFT); + writel(temp, host->regs + SDEDM); + /* Wait for FIFO threshold to populate */ + mdelay(20); + writel(SDVDD_POWER_ON, host->regs + SDVDD); + /* Wait for all components to go through power on cycle */ + mdelay(20); + writel(0, host->regs + SDHCFG); + writel(0, host->regs + SDCDIV); + + return 0; +} + +static int bcm2835_wait_transfer_complete(struct bcm2835_host *host) +{ + uint64_t start = get_time_ns(); + + while (1) { + u32 edm, fsm; + + edm = readl(host->regs + SDEDM); + fsm = edm & SDEDM_FSM_MASK; + + if ((fsm == SDEDM_FSM_IDENTMODE) || + (fsm == SDEDM_FSM_DATAMODE)) + break; + + if ((fsm == SDEDM_FSM_READWAIT) || + (fsm == SDEDM_FSM_WRITESTART1) || + (fsm == SDEDM_FSM_READDATA)) { + writel(edm | SDEDM_FORCE_DATA_MODE, + host->regs + SDEDM); + break; + } + + /* Error out after 1 second */ + if (is_timeout(start, 1 * SECOND)) { + dev_err(host->mci.hw_dev, + "wait_transfer_complete - still waiting 1s\n"); + return -ETIMEDOUT; + } + } + + return 0; +} + +static int bcm2835_transfer_block_pio(struct bcm2835_host *host, + struct mci_data *data, bool is_read) +{ + size_t blksize = data->blocksize; + int copy_words; + u32 hsts = 0; + u32 *buf; + + if (blksize % sizeof(u32)) + return -EINVAL; + + buf = is_read ? (u32 *)data->dest : (u32 *)data->src; + + if (is_read) + data->dest += blksize; + else + data->src += blksize; + + copy_words = blksize / sizeof(u32); + + /* + * Copy all contents from/to the FIFO as far as it reaches, + * then wait for it to fill/empty again and rewind. + */ + while (copy_words) { + int burst_words, words; + u32 edm; + + burst_words = min(SDDATA_FIFO_PIO_BURST, copy_words); + edm = readl(host->regs + SDEDM); + if (is_read) + words = edm_fifo_fill(edm); + else + words = SDDATA_FIFO_WORDS - edm_fifo_fill(edm); + + if (words < burst_words) { + int fsm_state = (edm & SDEDM_FSM_MASK); + + if ((is_read && + (fsm_state != SDEDM_FSM_READDATA && + fsm_state != SDEDM_FSM_READWAIT && + fsm_state != SDEDM_FSM_READCRC)) || + (!is_read && + (fsm_state != SDEDM_FSM_WRITEDATA && + fsm_state != SDEDM_FSM_WRITEWAIT1 && + fsm_state != SDEDM_FSM_WRITEWAIT2 && + fsm_state != SDEDM_FSM_WRITECRC && + fsm_state != SDEDM_FSM_WRITESTART1 && + fsm_state != SDEDM_FSM_WRITESTART2))) { + hsts = readl(host->regs + SDHSTS); + printf("fsm %x, hsts %08x\n", fsm_state, hsts); + if (hsts & SDHSTS_ERROR_MASK) + break; + } + + continue; + } else if (words > copy_words) { + words = copy_words; + } + + copy_words -= words; + + /* Copy current chunk to/from the FIFO */ + while (words) { + if (is_read) + *(buf++) = readl(host->regs + SDDATA); + else + writel(*(buf++), host->regs + SDDATA); + words--; + } + } + + return 0; +} + +static int bcm2835_transfer_pio(struct bcm2835_host *host, + struct mci_data *data) +{ + u32 sdhsts; + bool is_read = !!(data->flags & MMC_DATA_READ); + int ret = 0; + + ret = bcm2835_transfer_block_pio(host, data, is_read); + if (ret) + return ret; + + sdhsts = readl(host->regs + SDHSTS); + if (sdhsts & (SDHSTS_CRC16_ERROR | + SDHSTS_CRC7_ERROR | + SDHSTS_FIFO_ERROR)) { + printf("%s transfer error - HSTS %08x\n", + is_read ? "read" : "write", sdhsts); + ret = -EILSEQ; + } else if ((sdhsts & (SDHSTS_CMD_TIME_OUT | + SDHSTS_REW_TIME_OUT))) { + printf("%s timeout error - HSTS %08x\n", + is_read ? "read" : "write", sdhsts); + ret = -ETIMEDOUT; + } + + return ret; +} + +static u32 bcm2835_read_wait_sdcmd(struct bcm2835_host *host) +{ + u32 value; + int ret; + int timeout_us = SDHST_TIMEOUT_MAX_USEC; + + ret = readl_poll_timeout(host->regs + SDCMD, value, + !(value & SDCMD_NEW_FLAG), timeout_us); + if (ret == -ETIMEDOUT) + printf("%s: timeout (%d us)\n", __func__, timeout_us); + + return value; +} + +static int bcm2835_send_command(struct bcm2835_host *host, struct mci_cmd *cmd, + struct mci_data *data) +{ + u32 sdcmd, sdhsts; + + if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY)) { + printf("unsupported response type!\n"); + return -EINVAL; + } + + sdcmd = bcm2835_read_wait_sdcmd(host); + if (sdcmd & SDCMD_NEW_FLAG) { + printf("previous command never completed.\n"); + return -EBUSY; + } + + /* Clear any error flags */ + sdhsts = readl(host->regs + SDHSTS); + if (sdhsts & SDHSTS_ERROR_MASK) + writel(sdhsts, host->regs + SDHSTS); + + if (data) { + writel(data->blocksize, host->regs + SDHBCT); + writel(data->blocks, host->regs + SDHBLC); + } + + writel(cmd->cmdarg, host->regs + SDARG); + + sdcmd = cmd->cmdidx & SDCMD_CMD_MASK; + + if (!(cmd->resp_type & MMC_RSP_PRESENT)) { + sdcmd |= SDCMD_NO_RESPONSE; + } else { + if (cmd->resp_type & MMC_RSP_136) + sdcmd |= SDCMD_LONG_RESPONSE; + if (cmd->resp_type & MMC_RSP_BUSY) { + sdcmd |= SDCMD_BUSYWAIT; + } + } + + if (data) { + if (data->flags & MMC_DATA_WRITE) + sdcmd |= SDCMD_WRITE_CMD; + if (data->flags & MMC_DATA_READ) + sdcmd |= SDCMD_READ_CMD; + } + + writel(sdcmd | SDCMD_NEW_FLAG, host->regs + SDCMD); + + return 0; +} + +static int bcm2835_finish_command(struct bcm2835_host *host, + struct mci_cmd *cmd) +{ + u32 sdcmd; + int ret = 0; + + sdcmd = bcm2835_read_wait_sdcmd(host); + + /* Check for errors */ + if (sdcmd & SDCMD_NEW_FLAG) { + printf("command never completed.\n"); + return -EIO; + } else if (sdcmd & SDCMD_FAIL_FLAG) { + u32 sdhsts = readl(host->regs + SDHSTS); + + /* Clear the errors */ + writel(SDHSTS_ERROR_MASK, host->regs + SDHSTS); + + if (!(sdhsts & SDHSTS_CRC7_ERROR) || + (cmd->cmdidx != MMC_CMD_SEND_OP_COND)) { + if (sdhsts & SDHSTS_CMD_TIME_OUT) { + ret = -ETIMEDOUT; + } else { + printf("unexpected command %d error\n", + cmd->cmdidx); + ret = -EILSEQ; + } + + return ret; + } + } + + if (cmd->resp_type & MMC_RSP_PRESENT) { + if (cmd->resp_type & MMC_RSP_136) { + int i; + + for (i = 0; i < 4; i++) { + cmd->response[3 - i] = + readl(host->regs + SDRSP0 + i * 4); + } + } else { + cmd->response[0] = readl(host->regs + SDRSP0); + } + } + + return ret; +} + +static int bcm2835_check_cmd_error(struct bcm2835_host *host, u32 intmask) +{ + int ret = -EINVAL; + + if (!(intmask & SDHSTS_ERROR_MASK)) + return 0; + + printf("sdhost_busy_irq: intmask %08x\n", intmask); + if (intmask & SDHSTS_CRC7_ERROR) { + ret = -EILSEQ; + } else if (intmask & (SDHSTS_CRC16_ERROR | + SDHSTS_FIFO_ERROR)) { + ret = -EILSEQ; + } else if (intmask & (SDHSTS_REW_TIME_OUT | SDHSTS_CMD_TIME_OUT)) { + ret = -ETIMEDOUT; + } + + return ret; +} + +static int bcm2835_check_data_error(struct bcm2835_host *host, u32 intmask) +{ + int ret = 0; + + if (intmask & (SDHSTS_CRC16_ERROR | SDHSTS_FIFO_ERROR)) + ret = -EILSEQ; + if (intmask & SDHSTS_REW_TIME_OUT) + ret = -ETIMEDOUT; + + if (ret) + printf("%s:%d %d\n", __func__, __LINE__, ret); + + return ret; +} + +static int bcm2835_transmit(struct bcm2835_host *host, struct mci_cmd *cmd, + struct mci_data *data) +{ + u32 intmask = readl(host->regs + SDHSTS); + int ret; + + /* Check for errors */ + if (data) { + ret = bcm2835_check_data_error(host, intmask); + if (ret) + return ret; + } + + ret = bcm2835_check_cmd_error(host, intmask); + if (ret) + return ret; + + /* Handle wait for busy end */ + if ((cmd && (cmd->resp_type & MMC_RSP_BUSY)) && + (intmask & SDHSTS_BUSY_IRPT)) { + writel(SDHSTS_BUSY_IRPT, host->regs + SDHSTS); + bcm2835_finish_command(host, cmd); + } + + /* Handle PIO data transfer */ + while (data && data->blocks) { + ret = bcm2835_transfer_pio(host, data); + if (ret) + break; + data->blocks--; + } + + /* Transfer successful: wait for command to complete for real */ + if (!ret) + ret = bcm2835_wait_transfer_complete(host); + + return ret; +} + +static void bcm2835_set_clock(struct bcm2835_host *host, unsigned int clock) +{ + int div; + + /* The SDCDIV register has 11 bits, and holds (div - 2). But + * in data mode the max is 50MHz wihout a minimum, and only + * the bottom 3 bits are used. Since the switch over is + * automatic (unless we have marked the card as slow...), + * chosen values have to make sense in both modes. Ident mode + * must be 100-400KHz, so can range check the requested + * clock. CMD15 must be used to return to data mode, so this + * can be monitored. + * + * clock 250MHz -> 0->125MHz, 1->83.3MHz, 2->62.5MHz, 3->50.0MHz + * 4->41.7MHz, 5->35.7MHz, 6->31.3MHz, 7->27.8MHz + * + * 623->400KHz/27.8MHz + * reset value (507)->491159/50MHz + * + * BUT, the 3-bit clock divisor in data mode is too small if + * the core clock is higher than 250MHz, so instead use the + * SLOW_CARD configuration bit to force the use of the ident + * clock divisor at all times. + */ + + if (clock < 100000) { + /* Can't stop the clock, but make it as slow as possible + * to show willing + */ + writel(SDCDIV_MAX_CDIV, host->regs + SDCDIV); + return; + } + + div = host->mci.f_max / clock; + if (div < 2) + div = 2; + if ((host->mci.f_max / div) > clock) + div++; + div -= 2; + + if (div > SDCDIV_MAX_CDIV) + div = SDCDIV_MAX_CDIV; + + clock = host->mci.f_max / (div + 2); + + writel(div, host->regs + SDCDIV); + + /* Set the timeout to 500ms */ + writel(clock / 2, host->regs + SDTOUT); +} + +static int bcm2835_send_cmd(struct mci_host *mci, struct mci_cmd *cmd, + struct mci_data *data) +{ + struct bcm2835_host *host = to_bcm2835_host(mci); + u32 edm, fsm; + int ret = 0; + + if (data && !is_power_of_2(data->blocksize)) { + printf("unsupported block size (%d bytes)\n", data->blocksize); + + if (cmd) + return -EINVAL; + } + + edm = readl(host->regs + SDEDM); + fsm = edm & SDEDM_FSM_MASK; + + if ((fsm != SDEDM_FSM_IDENTMODE) && + (fsm != SDEDM_FSM_DATAMODE) && + (cmd && cmd->cmdidx != MMC_CMD_STOP_TRANSMISSION)) { + printf("previous command (%d) not complete (EDM %08x)\n", + readl(host->regs + SDCMD) & SDCMD_CMD_MASK, edm); + + if (cmd) + return -EILSEQ; + + return 0; + } + + if (cmd) { + ret = bcm2835_send_command(host, cmd, data); + if (!ret && !(cmd->resp_type & MMC_RSP_BUSY)) + ret = bcm2835_finish_command(host, cmd); + } + + /* Wait for completion of busy signal or data transfer */ + if ((cmd && (cmd->resp_type & MMC_RSP_BUSY)) || data) + ret = bcm2835_transmit(host, cmd, data); + + return ret; +} + +static void bcm2835_set_ios(struct mci_host *mci, struct mci_ios *ios) +{ + struct bcm2835_host *host = to_bcm2835_host(mci); + u32 hcfg = SDHCFG_WIDE_INT_BUS | SDHCFG_SLOW_CARD; + + if (ios->clock) + bcm2835_set_clock(host, ios->clock); + + /* set bus width */ + if (ios->bus_width == MMC_BUS_WIDTH_4) + hcfg |= SDHCFG_WIDE_EXT_BUS; + + writel(hcfg, host->regs + SDHCFG); +} + +static int bcm2835_sdhost_detect(struct device_d *dev) +{ + struct bcm2835_host *host = dev->priv; + + return mci_detect_card(&host->mci); +} + +static int bcm2835_sdhost_probe(struct device_d *dev) +{ + struct bcm2835_host *host; + struct resource *iores; + struct mci_host *mci; + + host = xzalloc(sizeof(*host)); + mci = &host->mci; + + host->clk = clk_get(dev, NULL); + if (IS_ERR(host->clk)) + return PTR_ERR(host->clk); + + iores = dev_request_mem_resource(dev, 0); + if (IS_ERR(iores)) { + dev_err(dev, "could not get iomem region\n"); + return PTR_ERR(iores); + } + host->regs = IOMEM(iores->start); + + mci->hw_dev = dev; + mci->f_max = clk_get_rate(host->clk); + mci->f_min = mci->f_max / SDCDIV_MAX_CDIV; + mci->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; + mci->host_caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED_52MHZ | + MMC_CAP_SD_HIGHSPEED; + + mci->init = bcm2835_sdhost_init; + mci->set_ios = bcm2835_set_ios; + mci->send_cmd = bcm2835_send_cmd; + + dev->priv = host; + dev->detect = bcm2835_sdhost_detect, + + mci_of_parse(mci); + + return mci_register(mci); +} + +static __maybe_unused struct of_device_id bcm2835_sdhost_compatible[] = { + { .compatible = "brcm,bcm2835-sdhost" }, + { /* sentinel */ } +}; + +static struct driver_d bcm2835_sdhost_driver = { + .name = "bcm2835-sdhost", + .probe = bcm2835_sdhost_probe, + .of_compatible = DRV_OF_COMPAT(bcm2835_sdhost_compatible), +}; +device_platform_driver(bcm2835_sdhost_driver); -- 2.20.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox