* [PATCH] spi: Enable Freescale QSPI controller driver for VF610 @ 2019-05-13 23:59 Andrey Smirnov 2019-05-14 11:32 ` Sascha Hauer 0 siblings, 1 reply; 3+ messages in thread From: Andrey Smirnov @ 2019-05-13 23:59 UTC (permalink / raw) To: barebox; +Cc: Andrey Smirnov VF610 is supported by this driver, so modify its Kconfig entry to reflect that. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> --- drivers/spi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index d687105ea..2e57457dc 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -27,7 +27,7 @@ config DRIVER_SPI_ATMEL config DRIVER_SPI_FSL_QUADSPI bool "Freescale QSPI controller" - depends on ARCH_IMX25 || ARCH_IMX31 || ARCH_IMX35 || ARCH_IMX50 || ARCH_IMX53 || ARCH_LAYERSCAPE + depends on ARCH_IMX25 || ARCH_IMX31 || ARCH_IMX35 || ARCH_IMX50 || ARCH_IMX53 || ARCH_LAYERSCAPE || ARCH_VF610 depends on SPI_MEM help This enables support for the Quad SPI controller in master mode. -- 2.21.0 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] spi: Enable Freescale QSPI controller driver for VF610 2019-05-13 23:59 [PATCH] spi: Enable Freescale QSPI controller driver for VF610 Andrey Smirnov @ 2019-05-14 11:32 ` Sascha Hauer 2019-05-14 13:30 ` Cory Tusar 0 siblings, 1 reply; 3+ messages in thread From: Sascha Hauer @ 2019-05-14 11:32 UTC (permalink / raw) To: Andrey Smirnov; +Cc: barebox On Mon, May 13, 2019 at 04:59:44PM -0700, Andrey Smirnov wrote: > VF610 is supported by this driver, so modify its Kconfig entry to > reflect that. > > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> > --- > drivers/spi/Kconfig | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig > index d687105ea..2e57457dc 100644 > --- a/drivers/spi/Kconfig > +++ b/drivers/spi/Kconfig > @@ -27,7 +27,7 @@ config DRIVER_SPI_ATMEL > > config DRIVER_SPI_FSL_QUADSPI > bool "Freescale QSPI controller" > - depends on ARCH_IMX25 || ARCH_IMX31 || ARCH_IMX35 || ARCH_IMX50 || ARCH_IMX53 || ARCH_LAYERSCAPE > + depends on ARCH_IMX25 || ARCH_IMX31 || ARCH_IMX35 || ARCH_IMX50 || ARCH_IMX53 || ARCH_LAYERSCAPE || ARCH_VF610 Not your fault, but this list is bogus. None of the i.MX SoCs actually has this hardware and the ones that have it are not in the list. We should rather remove this line entirely. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] spi: Enable Freescale QSPI controller driver for VF610 2019-05-14 11:32 ` Sascha Hauer @ 2019-05-14 13:30 ` Cory Tusar 0 siblings, 0 replies; 3+ messages in thread From: Cory Tusar @ 2019-05-14 13:30 UTC (permalink / raw) To: Sascha Hauer; +Cc: Andrey Smirnov, barebox On Tue, May 14, 2019 at 01:32:26PM +0200, Sascha Hauer wrote: > On Mon, May 13, 2019 at 04:59:44PM -0700, Andrey Smirnov wrote: > > VF610 is supported by this driver, so modify its Kconfig entry to > > reflect that. > > > > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> > > --- > > drivers/spi/Kconfig | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig > > index d687105ea..2e57457dc 100644 > > --- a/drivers/spi/Kconfig > > +++ b/drivers/spi/Kconfig > > @@ -27,7 +27,7 @@ config DRIVER_SPI_ATMEL > > > > config DRIVER_SPI_FSL_QUADSPI > > bool "Freescale QSPI controller" > > -depends on ARCH_IMX25 || ARCH_IMX31 || ARCH_IMX35 || ARCH_IMX50 || ARCH_IMX53 || ARCH_LAYERSCAPE > > +depends on ARCH_IMX25 || ARCH_IMX31 || ARCH_IMX35 || ARCH_IMX50 || ARCH_IMX53 || ARCH_LAYERSCAPE || ARCH_VF610 > > Not your fault, but this list is bogus. None of the i.MX SoCs actually > has this hardware and the ones that have it are not in the list. We > should rather remove this line entirely. Should be ARCH_MX6SX || ARCH_MX7 || ARCH_VF610 at the very least, no? I believe some of the the Layerscape SoCs use the same / very similar hardware block, but I don't know which ones off the top of my head. -Cory -- Cory Tusar Senior Software Engineer Zodiac Inflight Innovations 2929 E Imperial Hwy, Suite 170 Brea, CA 92821 (714) 203-0519 www.safran-aerosystems.com ________________________________ This email and any files transmitted with it are confidential & proprietary to Zodiac Inflight Innovations. This information is intended solely for the use of the individual or entity to which it is addressed. Access or transmittal of the information contained in this e-mail, in full or in part, to any other organization or persons is not authorized. _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-05-14 13:31 UTC | newest] Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-05-13 23:59 [PATCH] spi: Enable Freescale QSPI controller driver for VF610 Andrey Smirnov 2019-05-14 11:32 ` Sascha Hauer 2019-05-14 13:30 ` Cory Tusar
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox