mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: sam@ravnborg.org
Subject: [PATCH v3 0/9] ARM: at91: misc fixes and cleanup
Date: Thu, 23 May 2019 17:39:34 +0200	[thread overview]
Message-ID: <20190523153943.7995-1-a.fatoum@pengutronix.de> (raw)

The fixes are the same as in v2. The cleanup was made cleaner
a bit.

Changes since v2:
  - Collected Sam's Tested-by and Reviewed-by
  - Reinstated *_get_ddram_size helpers, but without #ifdefs,
    as suggested by Sascha
  - While doing that, some more unnecessary #ifdef usage unraveled,
    so added two patches for those as well
  - Squashed in a fix for another const-safety warning, suggested by Sam

Changes since v1:
  - Collected Sam's Tested-by and Reviewed-by
  - Included Sam's fix for the sama5d4 as patch 03
  - moved debug_ll base address defaults to common/Kconfig
  - above also got rid of a typo in the base address constant name
  - added patches 06-09 which remove board-specific helpers as suggested
    by Sascha in the review of the sama5d3 first stage patchset
  - added patch 10 with a fix for a warning I ran into in the newly
    ported clock drivers

Ahmad Fatoum (8):
  ARM: at91: replace __raw_{readl,writel} of peripherals with
    readl,writel
  ARM: at91: debug_ll: make UART base address configurable
  ARM: at91: remove references to non-existing CONFIG_ARCH_AT91*
  ARM: at91: remove no-longer needed subarch #ifdefery
  ARM: at91: remove #ifdefery around *_get_ddram_size helpers
  ARM: at91: fix at91sama5_get_ddram_size for sama5d4
  ARM: at91: remove duplicate get_ddram_size code
  clk: at91: fix warning about missing const-safety

Sam Ravnborg (1):
  arm: sama5d4: fix stack setup

 arch/arm/boards/at91rm9200ek/lowlevel.c       | 40 ++++-----
 arch/arm/boards/sama5d3_xplained/lowlevel.c   |  2 +-
 arch/arm/boards/sama5d3xek/lowlevel.c         |  2 +-
 arch/arm/boards/sama5d4_xplained/lowlevel.c   |  4 +-
 arch/arm/boards/sama5d4ek/lowlevel.c          |  4 +-
 arch/arm/mach-at91/Kconfig                    | 17 ----
 arch/arm/mach-at91/include/mach/at91_dbgu.h   |  2 -
 .../include/mach/at91sam926x_board_init.h     | 22 ++---
 .../mach-at91/include/mach/at91sam9_ddrsdr.h  | 68 ++-------------
 .../mach-at91/include/mach/at91sam9_sdramc.h  |  4 +-
 arch/arm/mach-at91/include/mach/debug_ll.h    | 13 +--
 arch/arm/mach-at91/include/mach/gpio.h        | 57 ++++++------
 arch/arm/mach-at91/include/mach/hardware.h    | 18 ----
 arch/arm/mach-at91/sam9_smc.c                 | 58 ++++++-------
 arch/arm/mach-at91/sama5d3_devices.c          |  2 +-
 arch/arm/mach-at91/sama5d4_devices.c          |  2 +-
 arch/arm/mach-at91/setup.c                    |  4 +-
 common/Kconfig                                | 21 +++++
 drivers/clk/at91/clk-generated.c              |  3 +-
 drivers/clk/at91/clk-main.c                   |  3 +-
 drivers/clocksource/timer-atmel-pit.c         |  4 +-
 drivers/mci/atmel-mci-regs.h                  |  4 +-
 drivers/net/at91_ether.h                      |  4 +-
 drivers/net/macb.h                            |  8 +-
 drivers/pinctrl/pinctrl-at91.c                | 28 +++---
 drivers/spi/atmel_spi.h                       |  4 +-
 drivers/usb/gadget/at91_udc.c                 | 86 +++++++++----------
 drivers/video/atmel_lcdfb.h                   |  4 +-
 28 files changed, 204 insertions(+), 284 deletions(-)

-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2019-05-23 15:40 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-23 15:39 Ahmad Fatoum [this message]
2019-05-23 15:39 ` [PATCH v3 1/9] ARM: at91: replace __raw_{readl, writel} of peripherals with readl, writel Ahmad Fatoum
2019-05-23 15:39 ` [PATCH v3 2/9] ARM: at91: debug_ll: make UART base address configurable Ahmad Fatoum
2019-05-23 15:39 ` [PATCH v3 3/9] ARM: at91: remove references to non-existing CONFIG_ARCH_AT91* Ahmad Fatoum
2019-05-23 15:39 ` [PATCH v3 4/9] ARM: at91: remove no-longer needed subarch #ifdefery Ahmad Fatoum
2019-05-23 15:39 ` [PATCH v3 5/9] ARM: at91: remove #ifdefery around *_get_ddram_size helpers Ahmad Fatoum
2019-05-23 15:39 ` [PATCH v3 6/9] arm: sama5d4: fix stack setup Ahmad Fatoum
2019-05-23 15:39 ` [PATCH v3 7/9] ARM: at91: fix at91sama5_get_ddram_size for sama5d4 Ahmad Fatoum
2019-05-23 15:39 ` [PATCH v3 8/9] ARM: at91: remove duplicate get_ddram_size code Ahmad Fatoum
2019-05-23 15:39 ` [PATCH v3 9/9] clk: at91: fix warning about missing const-safety Ahmad Fatoum
2019-05-23 16:36 ` [PATCH v3 0/9] ARM: at91: misc fixes and cleanup Sam Ravnborg
2019-05-24  6:17 ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190523153943.7995-1-a.fatoum@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=sam@ravnborg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox