mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 1/4] Documentation: Add zii-vf610-dev board documentation
Date: Mon, 27 May 2019 22:45:10 -0700	[thread overview]
Message-ID: <20190528054513.21313-2-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20190528054513.21313-1-andrew.smirnov@gmail.com>

Add OpenOCD scipts and notes on usage for various ZII VF610 based
boards.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 .../boards/imx/zii-vf610-dev/bootstrap.sh     |   6 +
 .../boards/imx/zii-vf610-dev/openocd.cfg      | 259 ++++++++++++++++++
 .../boards/imx/zii-vf610-dev/readme.rst       |  52 ++++
 3 files changed, 317 insertions(+)
 create mode 100755 Documentation/boards/imx/zii-vf610-dev/bootstrap.sh
 create mode 100644 Documentation/boards/imx/zii-vf610-dev/openocd.cfg
 create mode 100644 Documentation/boards/imx/zii-vf610-dev/readme.rst

diff --git a/Documentation/boards/imx/zii-vf610-dev/bootstrap.sh b/Documentation/boards/imx/zii-vf610-dev/bootstrap.sh
new file mode 100755
index 000000000..49bab0320
--- /dev/null
+++ b/Documentation/boards/imx/zii-vf610-dev/bootstrap.sh
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+OPENOCD=${OPENOCD:-openocd}
+DIR=$(CDPATH= cd -- "$(dirname -- "$0")" && pwd)
+
+${OPENOCD} -f ${DIR}/openocd.cfg --command "adapter_khz 10000; init; safe_reset; start_barebox;"
diff --git a/Documentation/boards/imx/zii-vf610-dev/openocd.cfg b/Documentation/boards/imx/zii-vf610-dev/openocd.cfg
new file mode 100644
index 000000000..509f9e33c
--- /dev/null
+++ b/Documentation/boards/imx/zii-vf610-dev/openocd.cfg
@@ -0,0 +1,259 @@
+#
+# Board configuration file for the Zodiac VF6xx based boards
+#
+
+interface ftdi
+ftdi_vid_pid 0x0403 0x6011
+
+ftdi_layout_init 0x0038 0x007b
+ftdi_layout_signal nSRST -data 0x0010
+ftdi_layout_signal LED -data 0x0020
+
+# select JTAG
+transport select jtag
+
+# Board has a standard ARM-20 JTAG connector with
+# nSRST available.
+reset_config srst_only srst_push_pull connect_deassert_srst
+
+# set a slow default JTAG clock, can be overridden later
+adapter_khz 1000
+
+# Source generic VF6xx target configuration
+source [find target/vybrid_vf6xx.cfg]
+source [find mem_helper.tcl]
+
+set ddr_init_failed 0
+
+proc check_bits_set_32 { addr mask } {
+    while { [expr [mrw $addr] & $mask == 0] } { }
+}
+
+proc ddr_init { } {
+	echo "Bootstrap: Initializing DDR"
+
+	mww phys 0x40048220 0x00000180
+	mww phys 0x40048224 0x00000180
+	mww phys 0x40048228 0x00000180
+	mww phys 0x4004822c 0x00000180
+	mww phys 0x40048230 0x00000180
+	mww phys 0x40048234 0x00000180
+	mww phys 0x40048238 0x00000180
+	mww phys 0x4004823c 0x00000180
+	mww phys 0x40048240 0x00000180
+	mww phys 0x40048244 0x00000180
+	mww phys 0x40048248 0x00000180
+	mww phys 0x4004824c 0x00000180
+	mww phys 0x40048250 0x00000180
+	mww phys 0x40048254 0x00000180
+	mww phys 0x40048258 0x00000180
+	mww phys 0x4004825c 0x00000180
+	mww phys 0x40048260 0x00000180
+	mww phys 0x40048264 0x00000180
+	mww phys 0x40048268 0x00000180
+	mww phys 0x4004826c 0x00000180
+	mww phys 0x40048270 0x00000180
+	mww phys 0x40048274 0x00010180
+	mww phys 0x40048278 0x00000180
+	mww phys 0x4004827c 0x00000180
+	mww phys 0x40048280 0x00000180
+	mww phys 0x40048284 0x00000180
+	mww phys 0x40048288 0x00000180
+	mww phys 0x4004828c 0x00000180
+	mww phys 0x40048290 0x00000180
+	mww phys 0x40048294 0x00000180
+	mww phys 0x40048298 0x00000180
+	mww phys 0x4004829c 0x00000180
+	mww phys 0x400482a0 0x00000180
+	mww phys 0x400482a4 0x00000180
+	mww phys 0x400482a8 0x00000180
+	mww phys 0x400482ac 0x00000180
+	mww phys 0x400482b0 0x00000180
+	mww phys 0x400482b4 0x00000180
+	mww phys 0x400482b8 0x00000180
+	mww phys 0x400482bc 0x00000180
+	mww phys 0x400482c0 0x00000180
+	mww phys 0x400482c4 0x00010180
+	mww phys 0x400482c8 0x00010180
+	mww phys 0x400482cc 0x00000180
+	mww phys 0x400482d0 0x00000180
+	mww phys 0x400482d4 0x00000180
+	mww phys 0x400482d8 0x00000180
+	mww phys 0x4004821c 0x00000180
+
+	mww phys 0x400482dc 0x00000180
+	mww phys 0x400482e0 0x00000180
+
+	mww phys 0x400ae000 0x00000600
+	mww phys 0x400ae008 0x00000005
+	mww phys 0x400ae028 0x00013880
+	mww phys 0x400ae02c 0x00030d40
+	mww phys 0x400ae030 0x0000050c
+	mww phys 0x400ae034 0x15040400
+	mww phys 0x400ae038 0x1406040f
+	mww phys 0x400ae040 0x04040000
+	mww phys 0x400ae044 0x006db00c
+	mww phys 0x400ae048 0x00000403
+	mww phys 0x400ae050 0x01000000
+	mww phys 0x400ae054 0x00060001
+	mww phys 0x400ae058 0x000c0000
+	mww phys 0x400ae05c 0x03000200
+	mww phys 0x400ae060 0x00000006
+	mww phys 0x400ae064 0x00010000
+	mww phys 0x400ae068 0x0c300068
+	mww phys 0x400ae070 0x00000000
+	mww phys 0x400ae074 0x00000003
+	mww phys 0x400ae078 0x0000000a
+	mww phys 0x400ae07c 0x006c0200
+	mww phys 0x400ae084 0x00010000
+	mww phys 0x400ae088 0x00050500
+	mww phys 0x400ae098 0x00000000
+	mww phys 0x400ae09c 0x04001002
+	mww phys 0x400ae0a4 0x00000001
+	mww phys 0x400ae0c0 0x00460420
+	mww phys 0x400ae108 0x01000200
+	mww phys 0x400ae10c 0x00000040
+	mww phys 0x400ae114 0x00000200
+	mww phys 0x400ae118 0x00000040
+	mww phys 0x400ae120 0x00000000
+	mww phys 0x400ae124 0x0a010100
+	mww phys 0x400ae128 0x01014040
+	mww phys 0x400ae12c 0x01010101
+	mww phys 0x400ae130 0x03030100
+	mww phys 0x400ae134 0x01000101
+	mww phys 0x400ae138 0x0700000c
+	mww phys 0x400ae13c 0x00000000
+	mww phys 0x400ae148 0x10000000
+	mww phys 0x400ae15c 0x01000000
+	mww phys 0x400ae160 0x00040000
+	mww phys 0x400ae164 0x00000002
+	mww phys 0x400ae16c 0x00020000
+	mww phys 0x400ae180 0x00002819
+	mww phys 0x400ae184 0x01000000
+	mww phys 0x400ae188 0x00000000
+	mww phys 0x400ae18c 0x00000000
+	mww phys 0x400ae198 0x00010100
+	mww phys 0x400ae1a4 0x00000000
+	mww phys 0x400ae1a8 0x00000004
+	mww phys 0x400ae1b8 0x00040000
+	mww phys 0x400ae1d4 0x00000000
+	mww phys 0x400ae1d8 0x01010000
+	mww phys 0x400ae1e0 0x02020000
+	mww phys 0x400ae1e4 0x00000202
+	mww phys 0x400ae1e8 0x01010064
+	mww phys 0x400ae1ec 0x00010101
+	mww phys 0x400ae1f0 0x00000064
+	mww phys 0x400ae1f8 0x00000800
+	mww phys 0x400ae210 0x00000506
+	mww phys 0x400ae224 0x00020000
+	mww phys 0x400ae228 0x01000100
+	mww phys 0x400ae22c 0x04070303
+	mww phys 0x400ae230 0x00000040
+	mww phys 0x400ae23c 0x06000080
+	mww phys 0x400ae240 0x04070303
+	mww phys 0x400ae244 0x00000040
+	mww phys 0x400ae248 0x00000040
+	mww phys 0x400ae24c 0x000f0000
+	mww phys 0x400ae250 0x000f0000
+	mww phys 0x400ae25c 0x00000101
+	mww phys 0x400ae268 0x682c4000
+	mww phys 0x400ae26c 0x00000081
+	mww phys 0x400ae278 0x00000006
+	mww phys 0x400ae284 0x00010606
+
+	mww phys 0x400ae400 0x00002613
+	mww phys 0x400ae440 0x00002613
+	mww phys 0x400ae404 0x00002615
+	mww phys 0x400ae444 0x00002615
+	mww phys 0x400ae408 0x00210000
+	mww phys 0x400ae448 0x00210000
+	mww phys 0x400ae488 0x00210000
+	mww phys 0x400ae40c 0x0001012a
+	mww phys 0x400ae44c 0x0001012a
+	mww phys 0x400ae48c 0x0001012a
+	mww phys 0x400ae410 0x00002400
+	mww phys 0x400ae450 0x00002400
+	mww phys 0x400ae490 0x00002400
+	mww phys 0x400ae4c4 0x00000000
+	mww phys 0x400ae4c8 0x00001100
+	mww phys 0x400ae4d0 0x00010101
+
+	mww phys 0x400ae000 0x00000601
+}
+
+proc clock_init { } {
+	echo "Bootstrap: Initializing clocks"
+	#
+	# This code assumes that debugger would be unable to prevent
+	# MaskROM initialization code from running before halting the
+	# processor. TODO: Port the initial clock settings as
+	# specified in TRM
+	#
+	# Ungate all of the peripheral clocks
+	#
+	mww phys 0x4006b040 0xffffffff
+	mww phys 0x4006b044 0xffffffff
+	mww phys 0x4006b048 0xffffffff
+	mww phys 0x4006b04c 0xffffffff
+	mww phys 0x4006b050 0xffffffff
+	mww phys 0x4006b058 0xffffffff
+	mww phys 0x4006b05c 0xffffffff
+	mww phys 0x4006b060 0xffffffff
+	mww phys 0x4006b064 0xffffffff
+	mww phys 0x4006b068 0xffffffff
+	mww phys 0x4006b06c 0xffffffff
+	#
+	# There are two possibilities for clocking DDR controller: ARM
+	# Cortex A core clock or PLL2 PFD4. Mask ROM configures ARM
+	# Cortex A clock to run at 264Mhz which is not sufficient to
+	# run DDR (it requres 300Mhz minimum) so instead we configure
+	# PLL2 PFD4 as a DDR clock
+	#
+	# PLL2 on, Fout = Fin * 22
+	#
+	mww phys 0x40050030 0x00002001
+
+	check_bits_set_32 0x40050030 0x80000000
+
+	mww phys 0x4006b008 [expr [mrw 0x4006b008] & ~0x00000040]
+	mww phys 0x4006b008 [expr [mrw 0x4006b008] | 0x00002000]
+}
+
+# This function applies the initial configuration after a "reset init"
+# command
+proc board_init { } {
+	global ddr_init_failed
+	clock_init
+
+	if {[catch {ddr_init} errmsg]} {
+		set ddr_init_failed 1
+	} else {
+		set ddr_init_failed 0
+	}
+}
+
+proc safe_reset {} {
+	global ddr_init_failed
+
+	set status 5
+	while { $status != 0 } {
+		reset init
+		if { $ddr_init_failed == 1 } {
+			incr status -1
+		} else {
+			set status 0
+		}
+	}
+}
+
+proc start_barebox { } {
+	set VF610_DDR_BASE_ADDR 0x80000000
+	echo "Bootstrap: Loading Barebox"
+	halt
+	load_image images/barebox-zii-vf610-dev.img $VF610_DDR_BASE_ADDR bin
+	arm core_state arm
+	echo [format "Bootstrap: Jumping to 0x%08x" $VF610_DDR_BASE_ADDR]
+	resume $VF610_DDR_BASE_ADDR
+}
+
+${_TARGETNAME}0 configure -event reset-init { board_init }
diff --git a/Documentation/boards/imx/zii-vf610-dev/readme.rst b/Documentation/boards/imx/zii-vf610-dev/readme.rst
new file mode 100644
index 000000000..9418a3a27
--- /dev/null
+++ b/Documentation/boards/imx/zii-vf610-dev/readme.rst
@@ -0,0 +1,52 @@
+ZII VF610 Based Boards
+======================
+
+Building Barebox
+----------------
+
+To build Barebox for ZII VF610 based boards do the following:
+
+.. code-block:: sh
+
+  make ARCH=arm CROSS_COMPILE=<ARM toolchain prefix> mrproper
+  make ARCH=arm CROSS_COMPILE=<ARM toolchain prefix> zii_vf610_dev_defconfig
+  make ARCH=arm CROSS_COMPILE=<ARM toolchain prefix>
+
+Uploading Barebox via JTAG
+--------------------------
+
+Barebox can be bootstrapped via JTAG using OpenOCD (latest master) as
+follows:
+
+.. code-block:: sh
+
+  cd barebox
+  Documentation/boards/imx/zii-vf610-dev/bootstrap.sh
+
+custom OpenOCD binary and options can be specified as follows:
+
+.. code-block:: sh
+
+  OPENOCD="../openocd/src/openocd -s ../openocd/tcl " Documentation/boards/imx/zii-vf610-dev/bootstrap.sh
+
+Writing Barebox to NVM
+----------------------
+
+With exception of Dev boards, all of ZII's VF610 based boards should
+come with eMMC. To permanently write Barebox to it do:
+
+.. code-block:: sh
+
+  barebox_update -t eMMC -y <barebox.img>
+
+This should also automaticaly configure your board to boot that
+image. Note that original ZII stack's bootloader in eMMC should be
+left intact. Barebox is configured to be programmed to one of MMC boot
+partitions, whereas original bootloader is located in user partition.
+
+To restore the board to booting using original bootloader do:
+
+.. code-block:: sh
+
+  detect mmc0
+  mmc0.boot=disabled
-- 
2.21.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2019-05-28  5:46 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-28  5:45 [PATCH 0/4] ZII boards documentation update Andrey Smirnov
2019-05-28  5:45 ` Andrey Smirnov [this message]
2019-05-28  5:45 ` [PATCH 2/4] Documentation: Add zii-imx7d-rpu2 board documentation Andrey Smirnov
2019-05-28  5:45 ` [PATCH 3/4] Documentation: Add zii-imx6-rdu2 " Andrey Smirnov
2019-05-28  5:45 ` [PATCH 4/4] Documentation: zii-imx8mq-dev: Update OpenOCD usage documentation Andrey Smirnov
2019-05-28  8:40 ` [PATCH 0/4] ZII boards documentation update Sascha Hauer
2019-05-29 13:16 ` [PATCH 1/3] fixup! Documentation: Add zii-vf610-dev board documentation Roland Hieber
2019-05-29 13:16 ` [PATCH 2/3] fixup! Documentation: Add zii-imx7d-rpu2 " Roland Hieber
2019-05-29 13:16 ` [PATCH 3/3] fixup! Documentation: Add zii-imx6-rdu2 " Roland Hieber

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190528054513.21313-2-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox