From: Ladislav Michl <ladis@linux-mips.org>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] net: macb: dma_sync_* receive buffers
Date: Thu, 30 May 2019 14:28:15 +0200 [thread overview]
Message-ID: <20190530122815.GA6973@lenoch> (raw)
In-Reply-To: <20181204075801.rku7i6vfgy55mp2c@pengutronix.de>
On Tue, Dec 04, 2018 at 08:58:01AM +0100, Sascha Hauer wrote:
> Ladis,
>
> On Fri, Nov 16, 2018 at 04:07:25PM +0100, Lucas Stach wrote:
> > > @@ -237,12 +241,17 @@ static int macb_recv(struct eth_device *edev)
> > > > taillen = length - headlen;
> > > > memcpy((void *)NetRxPackets[0],
> > > > buffer, headlen);
> > > > + dma_sync_single_for_cpu((unsigned long)macb->rx_buffer,
> > > > + taillen, DMA_FROM_DEVICE);
> > > > memcpy((void *)NetRxPackets[0] + headlen,
> > > macb->rx_buffer, taillen);
> >
> > This is missing a dma_sync_single_for_device() here, matching the
> > ...for_cpu added above. Otherwise patch looks good.
>
> Any input to this one or an updated patch?
This must have slipped to the very bottom of my mailbox, sorry.
We should also not running sync outside buffer, if it is wrapped.
Updated patch bellow.
ladis
--- 8< ---
From: Ladislav Michl <ladis@linux-mips.org>
Subject: [PATCH v2] net: macb: dma_sync_* receive buffers
Receive buffers are properly synchronized only if Cadence is
GEM. Fix it for MACB as well.
Fixes: 86dc5259e25d (net: macb: no need for coherent memory for receive buffer)
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
drivers/net/macb.c | 27 ++++++++++++++++++++-------
1 file changed, 20 insertions(+), 7 deletions(-)
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 0c0d17ee9..a0411d6e4 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -209,9 +209,11 @@ static int macb_recv(struct eth_device *edev)
dev_dbg(macb->dev, "%s\n", __func__);
for (;;) {
+ barrier();
if (!(macb->rx_ring[rx_tail].addr & MACB_BIT(RX_USED)))
return -1;
+ barrier();
status = macb->rx_ring[rx_tail].ctrl;
if (status & MACB_BIT(RX_SOF)) {
if (rx_tail != macb->rx_tail)
@@ -228,14 +230,26 @@ static int macb_recv(struct eth_device *edev)
headlen = macb->rx_buffer_size * (macb->rx_ring_size
- macb->rx_tail);
taillen = length - headlen;
- memcpy((void *)NetRxPackets[0],
- buffer, headlen);
+ dma_sync_single_for_cpu((unsigned long)buffer,
+ headlen, DMA_FROM_DEVICE);
+ memcpy((void *)NetRxPackets[0], buffer, headlen);
+ dma_sync_single_for_cpu((unsigned long)macb->rx_buffer,
+ taillen, DMA_FROM_DEVICE);
memcpy((void *)NetRxPackets[0] + headlen,
- macb->rx_buffer, taillen);
- buffer = (void *)NetRxPackets[0];
+ macb->rx_buffer, taillen);
+ dma_sync_single_for_device((unsigned long)buffer,
+ headlen, DMA_FROM_DEVICE);
+ dma_sync_single_for_device((unsigned long)macb->rx_buffer,
+ taillen, DMA_FROM_DEVICE);
+ net_receive(edev, NetRxPackets[0], length);
+ } else {
+ dma_sync_single_for_cpu((unsigned long)buffer, length,
+ DMA_FROM_DEVICE);
+ net_receive(edev, buffer, length);
+ dma_sync_single_for_device((unsigned long)buffer, length,
+ DMA_FROM_DEVICE);
}
-
- net_receive(edev, buffer, length);
+ barrier();
if (++rx_tail >= macb->rx_ring_size)
rx_tail = 0;
reclaim_rx_buffers(macb, rx_tail);
@@ -245,7 +259,6 @@ static int macb_recv(struct eth_device *edev)
rx_tail = 0;
}
}
- barrier();
}
return 0;
--
2.20.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2019-05-30 12:28 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-15 0:36 Ladislav Michl
2018-11-16 15:07 ` Lucas Stach
2018-12-04 7:58 ` Sascha Hauer
2019-05-30 12:28 ` Ladislav Michl [this message]
2019-06-04 6:49 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190530122815.GA6973@lenoch \
--to=ladis@linux-mips.org \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox