From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Subject: [RFC 2/4] serial: add litex UART driver
Date: Sun, 2 Jun 2019 10:30:59 +0300 [thread overview]
Message-ID: <20190602073101.21352-3-antonynpavlov@gmail.com> (raw)
In-Reply-To: <20190602073101.21352-1-antonynpavlov@gmail.com>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
drivers/serial/Makefile | 1 +
drivers/serial/serial_litex.c | 99 +++++++++++++++++++++++++++++++++++
2 files changed, 100 insertions(+)
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 4174cc1ffb..fa86aa8c05 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -23,3 +23,4 @@ obj-$(CONFIG_DRIVER_SERIAL_CADENCE) += serial_cadence.o
obj-$(CONFIG_DRIVER_SERIAL_EFI_STDIO) += efi-stdio.o
obj-$(CONFIG_DRIVER_SERIAL_DIGIC) += serial_digic.o
obj-$(CONFIG_DRIVER_SERIAL_LPUART) += serial_lpuart.o
+obj-$(CONFIG_MACH_LITEX) += serial_litex.o
diff --git a/drivers/serial/serial_litex.c b/drivers/serial/serial_litex.c
new file mode 100644
index 0000000000..4a23921ac7
--- /dev/null
+++ b/drivers/serial/serial_litex.c
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.
+/*
+ * Copyright (C) 2019 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <malloc.h>
+#include <io.h>
+
+#include <mach/debug_ll.h>
+
+static inline uint32_t litex_serial_readb(struct console_device *cdev,
+ uint32_t offset)
+{
+ void __iomem *base = cdev->dev->priv;
+
+ return readb(base + offset);
+}
+
+static inline void litex_serial_writeb(struct console_device *cdev,
+ uint32_t value, uint32_t offset)
+{
+ void __iomem *base = cdev->dev->priv;
+
+ writeb(value, base + offset);
+}
+
+static void litex_serial_putc(struct console_device *cdev, char c)
+{
+ while (litex_serial_readb(cdev, UART_TXFULL))
+ ;
+
+ litex_serial_writeb(cdev, c, UART_RXTX);
+}
+
+static int litex_serial_getc(struct console_device *cdev)
+{
+ int c;
+
+ while (litex_serial_readb(cdev, UART_RXEMPTY))
+ ;
+
+ c = litex_serial_readb(cdev, UART_RXTX);
+
+ /* refresh UART_RXEMPTY by writing UART_EV_RX to UART_EV_PENDING */
+ litex_serial_writeb(cdev, UART_EV_RX, UART_EV_PENDING);
+
+ return c;
+}
+
+static int litex_serial_tstc(struct console_device *cdev)
+{
+ if (litex_serial_readb(cdev, UART_RXEMPTY)) {
+ return 0;
+ }
+
+ return 1;
+}
+
+static int litex_serial_probe(struct device_d *dev)
+{
+ struct resource *iores;
+ struct console_device *cdev;
+
+ cdev = xzalloc(sizeof(struct console_device));
+ iores = dev_request_mem_resource(dev, 0);
+ if (IS_ERR(iores))
+ return PTR_ERR(iores);
+ dev->priv = IOMEM(iores->start);
+ cdev->dev = dev;
+ cdev->tstc = &litex_serial_tstc;
+ cdev->putc = &litex_serial_putc;
+ cdev->getc = &litex_serial_getc;
+ cdev->setbrg = NULL;
+
+ console_register(cdev);
+
+ return 0;
+}
+
+static __maybe_unused struct of_device_id litex_serial_dt_ids[] = {
+ {
+ .compatible = "litex,uart",
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct driver_d litex_serial_driver = {
+ .name = "litex-uart",
+ .probe = litex_serial_probe,
+ .of_compatible = DRV_OF_COMPAT(litex_serial_dt_ids),
+};
+console_platform_driver(litex_serial_driver);
--
2.20.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2019-06-02 7:31 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-02 7:30 [RFC 0/4] riscv: add initial LiteX SoC support Antony Pavlov
2019-06-02 7:30 ` [RFC 1/4] " Antony Pavlov
2019-06-02 7:30 ` Antony Pavlov [this message]
2019-06-03 5:10 ` [RFC 2/4] serial: add litex UART driver Ahmad Fatoum
2019-06-03 5:13 ` Ahmad Fatoum
2019-06-02 7:31 ` [RFC 3/4] WIP: make it work on litex Antony Pavlov
2019-06-07 7:11 ` Sascha Hauer
2019-06-02 7:31 ` [RFC 4/4] riscv: add litex_defconfig Antony Pavlov
2019-06-02 9:08 ` [RFC 0/4] riscv: add initial LiteX SoC support Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190602073101.21352-3-antonynpavlov@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox