From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1hY3B8-0006KB-UM for barebox@lists.infradead.org; Tue, 04 Jun 2019 06:44:17 +0000 Date: Tue, 4 Jun 2019 08:44:10 +0200 From: Sascha Hauer Message-ID: <20190604064410.6ru66scgiv6iueat@pengutronix.de> References: <20190528090042.11745-1-m.grzeschik@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20190528090042.11745-1-m.grzeschik@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH v4] gpio: add driver for PCF857x, PCA{85, 96}7x, and MAX732[89] I2C GPIO expanders To: Michael Grzeschik Cc: barebox@lists.infradead.org, Sam Ravnborg On Tue, May 28, 2019 at 11:00:43AM +0200, Michael Grzeschik wrote: > Reviewed-by: Sam Ravnborg > Signed-off-by: Michael Grzeschik > --- > v1 -> v2: > > - removed unnecessary chapter in kconfig helptext > - removed platform data setup and teardown callbacks > - removed error path for xzalloc > > v2 -> v3: > > - removed include/platform_data/pcf857x.h > - removed useage and comments of platform_data > > v3 -> v4: > > - added depends on CONFIG_OF Applied, thanks Sascha > > drivers/gpio/Kconfig | 17 +++ > drivers/gpio/Makefile | 1 + > drivers/gpio/gpio-pcf857x.c | 256 ++++++++++++++++++++++++++++++++++++ > 3 files changed, 274 insertions(+) > create mode 100644 drivers/gpio/gpio-pcf857x.c > > diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig > index c535904ed0..6a4de7fbc8 100644 > --- a/drivers/gpio/Kconfig > +++ b/drivers/gpio/Kconfig > @@ -98,6 +98,23 @@ config GPIO_PCA953X > > 40 bits: pca9505, pca9698 > > +config GPIO_PCF857X > + tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders" > + depends on I2C > + depends on CONFIG_OF > + help > + Say yes here to provide access to most "quasi-bidirectional" I2C > + GPIO expanders used for additional digital outputs or inputs. > + Most of these parts are from NXP, though TI is a second source for > + some of them. Compatible models include: > + > + 8 bits: pcf8574, pcf8574a, pca8574, pca8574a, > + pca9670, pca9672, pca9674, pca9674a, > + max7328, max7329 > + > + 16 bits: pcf8575, pcf8575c, pca8575, > + pca9671, pca9673, pca9675 > + > config GPIO_PL061 > bool "PrimeCell PL061 GPIO support" > depends on ARM_AMBA > diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile > index 52280f0bb4..990df01788 100644 > --- a/drivers/gpio/Makefile > +++ b/drivers/gpio/Makefile > @@ -14,6 +14,7 @@ obj-$(CONFIG_GPIO_MALTA_FPGA_I2C) += gpio-malta-fpga-i2c.o > obj-$(CONFIG_GPIO_ORION) += gpio-orion.o > obj-$(CONFIG_GPIO_OMAP) += gpio-omap.o > obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o > +obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o > obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o > obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o > obj-$(CONFIG_GPIO_TEGRA) += gpio-tegra.o > diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c > new file mode 100644 > index 0000000000..6c1c0ac352 > --- /dev/null > +++ b/drivers/gpio/gpio-pcf857x.c > @@ -0,0 +1,256 @@ > +/* > + * Driver for pcf857x, pca857x, and pca967x I2C GPIO expanders > + * > + * This code was ported from linux-5.1 kernel by Michael Grzeschik. > + * > + * Copyright (C) 2007 David Brownell > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +static const struct platform_device_id pcf857x_id[] = { > + { "pcf8574", 8 }, > + { "pcf8574a", 8 }, > + { "pca8574", 8 }, > + { "pca9670", 8 }, > + { "pca9672", 8 }, > + { "pca9674", 8 }, > + { "pcf8575", 16 }, > + { "pca8575", 16 }, > + { "pca9671", 16 }, > + { "pca9673", 16 }, > + { "pca9675", 16 }, > + { "max7328", 8 }, > + { "max7329", 8 }, > + { } > +}; > + > +/* > + * The pcf857x, pca857x, and pca967x chips only expose one read and one > + * write register. Writing a "one" bit (to match the reset state) lets > + * that pin be used as an input; it's not an open-drain model, but acts > + * a bit like one. This is described as "quasi-bidirectional"; read the > + * chip documentation for details. > + * > + * Many other I2C GPIO expander chips (like the pca953x models) have > + * more complex register models and more conventional circuitry using > + * push/pull drivers. They often use the same 0x20..0x27 addresses as > + * pcf857x parts, making the "legacy" I2C driver model problematic. > + */ > +struct pcf857x { > + struct gpio_chip chip; > + struct i2c_client *client; > + unsigned out; /* software latch */ > + > + int (*write)(struct i2c_client *client, unsigned data); > + int (*read)(struct i2c_client *client); > +}; > + > +static inline struct pcf857x *to_pcf(struct gpio_chip *gc) > +{ > + return container_of(gc, struct pcf857x, chip); > +} > + > +/*-------------------------------------------------------------------------*/ > + > +/* Talk to 8-bit I/O expander */ > + > +static int i2c_write_le8(struct i2c_client *client, unsigned data) > +{ > + return i2c_smbus_write_byte(client, data); > +} > + > +static int i2c_read_le8(struct i2c_client *client) > +{ > + return (int)i2c_smbus_read_byte(client); > +} > + > +/* Talk to 16-bit I/O expander */ > + > +static int i2c_write_le16(struct i2c_client *client, unsigned word) > +{ > + u8 buf[2] = { word & 0xff, word >> 8, }; > + int ret; > + > + ret = i2c_master_send(client, buf, 2); > + return (ret < 0) ? ret : 0; > +} > + > +static int i2c_read_le16(struct i2c_client *client) > +{ > + u8 buf[2]; > + int ret; > + > + ret = i2c_master_recv(client, buf, 2); > + if (ret < 0) > + return ret; > + return (buf[1] << 8) | buf[0]; > +} > + > +/*-------------------------------------------------------------------------*/ > + > +static int pcf857x_input(struct gpio_chip *chip, unsigned offset) > +{ > + struct pcf857x *gpio = to_pcf(chip); > + int ret; > + > + gpio->out |= (1 << offset); > + ret = gpio->write(gpio->client, gpio->out); > + > + return ret; > +} > + > +static int pcf857x_get(struct gpio_chip *chip, unsigned offset) > +{ > + struct pcf857x *gpio = to_pcf(chip); > + int value; > + > + value = gpio->read(gpio->client); > + return (value < 0) ? value : !!(value & (1 << offset)); > +} > + > +static int pcf857x_output(struct gpio_chip *chip, unsigned offset, int value) > +{ > + struct pcf857x *gpio = to_pcf(chip); > + unsigned bit = 1 << offset; > + int ret; > + > + if (value) > + gpio->out |= bit; > + else > + gpio->out &= ~bit; > + ret = gpio->write(gpio->client, gpio->out); > + > + return ret; > +} > + > +static void pcf857x_set(struct gpio_chip *chip, unsigned offset, int value) > +{ > + pcf857x_output(chip, offset, value); > +} > + > +/*-------------------------------------------------------------------------*/ > + > +static struct gpio_ops pcf857x_gpio_ops = { > + .direction_input = pcf857x_input, > + .direction_output = pcf857x_output, > + .get = pcf857x_get, > + .set = pcf857x_set, > +}; > + > +static int pcf857x_probe(struct device_d *dev) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct device_node *np = dev->device_node; > + struct pcf857x *gpio; > + unsigned long driver_data; > + unsigned int n_latch = 0; > + int ret; > + > + if (!np) > + return -EINVAL; > + > + of_property_read_u32(np, "lines-initial-states", &n_latch); > + > + /* Allocate, initialize, and register this gpio_chip. */ > + gpio = xzalloc(sizeof(*gpio)); > + > + ret = dev_get_drvdata(dev, (const void **)&driver_data); > + if (ret) > + return ret; > + > + gpio->chip.base = -1; > + gpio->chip.ops = &pcf857x_gpio_ops; > + gpio->chip.ngpio = driver_data; > + gpio->chip.dev = &client->dev; > + > + /* NOTE: the OnSemi jlc1562b is also largely compatible with > + * these parts, notably for output. It has a low-resolution > + * DAC instead of pin change IRQs; and its inputs can be the > + * result of comparators. > + */ > + > + /* 8574 addresses are 0x20..0x27; 8574a uses 0x38..0x3f; > + * 9670, 9672, 9764, and 9764a use quite a variety. > + * > + * NOTE: we don't distinguish here between *4 and *4a parts. > + */ > + switch (gpio->chip.ngpio) { > + case 8: > + gpio->write = i2c_write_le8; > + gpio->read = i2c_read_le8; > + break; > + /* '75/'75c addresses are 0x20..0x27, just like the '74; > + * the '75c doesn't have a current source pulling high. > + * 9671, 9673, and 9765 use quite a variety of addresses. > + * > + * NOTE: we don't distinguish here between '75 and '75c parts. > + */ > + case 16: > + gpio->write = i2c_write_le16; > + gpio->read = i2c_read_le16; > + break; > + default: > + dev_warn(&client->dev, "unsupported number of gpios\n"); > + return -EINVAL; > + } > + > + gpio->client = client; > + > + /* NOTE: these chips have strange "quasi-bidirectional" I/O pins. > + * We can't actually know whether a pin is configured (a) as output > + * and driving the signal low, or (b) as input and reporting a low > + * value ... without knowing the last value written since the chip > + * came out of reset (if any). We can't read the latched output. > + * > + * In short, the only reliable solution for setting up pin direction > + * is to do it explicitly. > + * > + * Using n_latch avoids that trouble. When left initialized to zero, > + * our software copy of the "latch" then matches the chip's all-ones > + * reset state. Otherwise it flags pins to be driven low. > + */ > + gpio->out = ~n_latch; > + > + ret = gpiochip_add(&gpio->chip); > + if (ret) > + return ret; > + > + return ret; > +} > + > +static const struct of_device_id pcf857x_dt_ids[] = { > + { .compatible = "nxp,pcf8574", .data = (void *)8 }, > + { .compatible = "nxp,pcf8574a", .data = (void *)8 }, > + { .compatible = "nxp,pca8574", .data = (void *)8 }, > + { .compatible = "nxp,pca9670", .data = (void *)8 }, > + { .compatible = "nxp,pca9672", .data = (void *)8 }, > + { .compatible = "nxp,pca9674", .data = (void *)8 }, > + { .compatible = "nxp,pcf8575", .data = (void *)16 }, > + { .compatible = "nxp,pca8575", .data = (void *)16 }, > + { .compatible = "nxp,pca9671", .data = (void *)16 }, > + { .compatible = "nxp,pca9673", .data = (void *)16 }, > + { .compatible = "nxp,pca9675", .data = (void *)16 }, > + { .compatible = "maxim,max7328", .data = (void *)8 }, > + { .compatible = "maxim,max7329", .data = (void *)8 }, > + { } > +}; > + > +static struct driver_d pcf857x_driver = { > + .name = "pcf857x", > + .probe = pcf857x_probe, > + .of_compatible = DRV_OF_COMPAT(pcf857x_dt_ids), > + .id_table = pcf857x_id, > +}; > +device_i2c_driver(pcf857x_driver); > -- > 2.20.1 > > > _______________________________________________ > barebox mailing list > barebox@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox