From: Sascha Hauer <s.hauer@pengutronix.de>
To: Lucas Stach <l.stach@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 1/3] ARM: zii-imx8mq-dev: add barebox and environment partition
Date: Tue, 4 Jun 2019 09:55:37 +0200 [thread overview]
Message-ID: <20190604075536.jo6su7f7hid5t3bf@pengutronix.de> (raw)
In-Reply-To: <20190531094730.8265-1-l.stach@pengutronix.de>
On Fri, May 31, 2019 at 11:47:28AM +0200, Lucas Stach wrote:
> While barebox itself should be on the eMMC boot partitions eventually
> it's nice to have this set up, so one can dd a prebuilt SD card image
> to the eMMC and have something working. A working Barebox env is also
> very convinient to have around during development.
>
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
> arch/arm/boards/zii-imx8mq-dev/board.c | 6 +++++
> arch/arm/dts/imx8mq-zii-ultra.dtsi | 37 ++++++++++++++++++++++++++
> 2 files changed, 43 insertions(+)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/boards/zii-imx8mq-dev/board.c b/arch/arm/boards/zii-imx8mq-dev/board.c
> index 94e71f58ceb7..4dbe23f58ce2 100644
> --- a/arch/arm/boards/zii-imx8mq-dev/board.c
> +++ b/arch/arm/boards/zii-imx8mq-dev/board.c
> @@ -4,6 +4,7 @@
> * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
> */
>
> +#include <bootsource.h>
> #include <common.h>
> #include <init.h>
> #include <asm/memory.h>
> @@ -19,6 +20,11 @@ static int zii_imx8mq_dev_init(void)
>
> imx8mq_bbu_internal_mmcboot_register_handler("eMMC", "/dev/mmc0", 0);
>
> + if (bootsource_get_instance() == 0)
> + of_device_enable_path("/chosen/environment-emmc");
> + else
> + of_device_enable_path("/chosen/environment-sd");
> +
> return 0;
> }
> device_initcall(zii_imx8mq_dev_init);
> diff --git a/arch/arm/dts/imx8mq-zii-ultra.dtsi b/arch/arm/dts/imx8mq-zii-ultra.dtsi
> index ccf80d3de838..53679b0d3c40 100644
> --- a/arch/arm/dts/imx8mq-zii-ultra.dtsi
> +++ b/arch/arm/dts/imx8mq-zii-ultra.dtsi
> @@ -10,6 +10,17 @@
> / {
> chosen {
> stdout-path = &uart1;
> +
> + environment-emmc {
> + compatible = "barebox,environment";
> + device-path = &usdhc1, "partname:barebox-environment";
> + status = "disabled";
> + };
> + environment-sd {
> + compatible = "barebox,environment";
> + device-path = &usdhc2, "partname:barebox-environment";
> + status = "disabled";
> + };
> };
>
> mdio0: bitbang-mdio {
> @@ -348,6 +359,19 @@
> no-sd;
> no-sdio;
> status = "okay";
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "barebox";
> + reg = <0x0 0xe0000>;
> + };
> +
> + partition@e0000 {
> + label = "barebox-environment";
> + reg = <0xe0000 0x20000>;
> + };
> };
>
> &usdhc2 {
> @@ -358,6 +382,19 @@
> cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> vmmc-supply = <®_usdhc2_vmmc>;
> status = "okay";
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "barebox";
> + reg = <0x0 0xe0000>;
> + };
> +
> + partition@e0000 {
> + label = "barebox-environment";
> + reg = <0xe0000 0x20000>;
> + };
> };
>
> &iomuxc {
> --
> 2.20.1
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2019-06-04 7:55 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-31 9:47 Lucas Stach
2019-05-31 9:47 ` [PATCH 2/3] ARM: zii-imx8mq-dev: add defaultenv with simple boot configuration Lucas Stach
2019-05-31 9:47 ` [PATCH 3/3] ARM: rdu3: disable i210 network interface Lucas Stach
2019-05-31 15:08 ` Vivien Didelot
2019-06-04 7:55 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190604075536.jo6su7f7hid5t3bf@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=l.stach@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox