[PATCH 10/10] ARM: zii-imx7d-dev: Add support for RMU2 board

[Andrey Smirnov <andrew.smirnov@gmail.com>]

Add support for Remote Modem Unit i.MX7D board.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 arch/arm/boards/zii-imx7d-dev/Makefile   |   1 +
 arch/arm/boards/zii-imx7d-dev/board.c    |   3 +-
 arch/arm/boards/zii-imx7d-dev/lowlevel.c |  60 +++-
 arch/arm/dts/Makefile                    |   2 +-
 arch/arm/dts/imx7d-zii-rmu2.dts          |   8 +
 arch/arm/dts/imx7d-zii-rmu2.dtsi         | 361 +++++++++++++++++++++++
 6 files changed, 432 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/dts/imx7d-zii-rmu2.dts
 create mode 100644 arch/arm/dts/imx7d-zii-rmu2.dtsi

diff --git a/arch/arm/boards/zii-imx7d-dev/Makefile b/arch/arm/boards/zii-imx7d-dev/Makefile
index 01c7a259e..e1baed17b 100644
--- a/arch/arm/boards/zii-imx7d-dev/Makefile
+++ b/arch/arm/boards/zii-imx7d-dev/Makefile
@@ -1,2 +1,3 @@
+CFLAGS_pbl-lowlevel.o := -fno-tree-switch-conversion -fno-jump-tables
 obj-y += board.o
 lwl-y += lowlevel.o
diff --git a/arch/arm/boards/zii-imx7d-dev/board.c b/arch/arm/boards/zii-imx7d-dev/board.c
index 0a99976b7..89f051530 100644
--- a/arch/arm/boards/zii-imx7d-dev/board.c
+++ b/arch/arm/boards/zii-imx7d-dev/board.c
@@ -33,7 +33,8 @@ static void zii_imx7d_rpu2_init_fec(void)
 
 static int zii_imx7d_rpu2_coredevices_init(void)
 {
-	if (!of_machine_is_compatible("zii,imx7d-zii-rpu2"))
+	if (!of_machine_is_compatible("zii,imx7d-zii-rpu2") &&
+	    !of_machine_is_compatible("zii,imx7d-rmu2"))
 		return 0;
 
 	zii_imx7d_rpu2_init_fec();
diff --git a/arch/arm/boards/zii-imx7d-dev/lowlevel.c b/arch/arm/boards/zii-imx7d-dev/lowlevel.c
index d7f8feb95..3ad4940da 100644
--- a/arch/arm/boards/zii-imx7d-dev/lowlevel.c
+++ b/arch/arm/boards/zii-imx7d-dev/lowlevel.c
@@ -19,6 +19,7 @@
 #include <mach/esdctl.h>
 
 extern char __dtb_imx7d_zii_rpu2_start[];
+extern char __dtb_imx7d_zii_rmu2_start[];
 
 static inline void setup_uart(void)
 {
@@ -39,12 +40,69 @@ static inline void setup_uart(void)
 	putc_ll('>');
 }
 
+enum zii_platform_imx7d_type {
+	ZII_PLATFORM_IMX7D_RPU2 = 0b0000,
+	ZII_PLATFORM_IMX7D_RMU2 = 0b1000,
+};
+
+static unsigned int get_system_type(void)
+{
+#define GPIO_DR		0x000
+#define GPIO_GDIR	0x004
+#define SYSTEM_TYPE	GENMASK(15, 12)
+
+	u32 gdir, dr;
+	void __iomem *gpio2 = IOMEM(MX7_GPIO2_BASE_ADDR);
+	void __iomem *iomuxbase = IOMEM(MX7_IOMUXC_BASE_ADDR);
+
+	/*
+	 * System type is encoded as a 4-bit number specified by the
+	 * following pins (pulled up or down with resistors on the
+	 * board).
+	 */
+	imx_setup_pad(iomuxbase, MX7D_PAD_EPDC_DATA12__GPIO2_IO12);
+	imx_setup_pad(iomuxbase, MX7D_PAD_EPDC_DATA13__GPIO2_IO13);
+	imx_setup_pad(iomuxbase, MX7D_PAD_EPDC_DATA14__GPIO2_IO14);
+	imx_setup_pad(iomuxbase, MX7D_PAD_EPDC_DATA15__GPIO2_IO15);
+
+	gdir = readl(gpio2 + GPIO_GDIR);
+	gdir &= ~SYSTEM_TYPE;
+	writel(gdir, gpio2 + GPIO_GDIR);
+
+	dr = readl(gpio2 + GPIO_DR);
+
+	return FIELD_GET(SYSTEM_TYPE, dr);
+}
+
 ENTRY_FUNCTION(start_zii_imx7d_dev, r0, r1, r2)
 {
+	void *fdt;
+	const unsigned int system_type = get_system_type();
+
 	imx7_cpu_lowlevel_init();
 
 	if (IS_ENABLED(CONFIG_DEBUG_LL))
 		setup_uart();
 
-	imx7d_barebox_entry(__dtb_imx7d_zii_rpu2_start + get_runtime_offset());
+	switch (system_type) {
+	default:
+		if (IS_ENABLED(CONFIG_DEBUG_LL)) {
+			relocate_to_current_adr();
+			setup_c();
+			puts_ll("\n*********************************\n");
+			puts_ll("* Unknown system type: ");
+			puthex_ll(system_type);
+			puts_ll("\n* Assuming RPU2\n");
+			puts_ll("*********************************\n");
+		}
+		/* FALLTHROUGH */
+	case ZII_PLATFORM_IMX7D_RPU2:
+		fdt = __dtb_imx7d_zii_rpu2_start;
+		break;
+	case ZII_PLATFORM_IMX7D_RMU2:
+		fdt = __dtb_imx7d_zii_rmu2_start;
+		break;
+	}
+
+	imx7d_barebox_entry(fdt + get_runtime_offset());
 }
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 4c79b9880..010408bd5 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -133,7 +133,7 @@ pbl-dtb-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += at91-microchip-ksz9477-evb.dtb.o
 pbl-dtb-$(CONFIG_MACH_AT91SAM9X5EK) += at91sam9x5ek.dtb.o
 pbl-dtb-$(CONFIG_MACH_XILINX_ZCU104) += zynqmp-zcu104-revA.dtb.o
 
-pbl-dtb-$(CONFIG_MACH_ZII_IMX7D_DEV) += imx7d-zii-rpu2.dtb.o
+pbl-dtb-$(CONFIG_MACH_ZII_IMX7D_DEV) += imx7d-zii-rpu2.dtb.o imx7d-zii-rmu2.dtb.o
 pbl-dtb-$(CONFIG_MACH_WAGO_PFC_AM35XX) += am35xx-pfc-750_820x.dtb.o
 pbl-dtb-$(CONFIG_MACH_LS1046ARDB) += fsl-ls1046a-rdb.dtb.o
 pbl-dtb-$(CONFIG_MACH_TQMLS1046A) += fsl-tqmls1046a-mbls10xxa.dtb.o
diff --git a/arch/arm/dts/imx7d-zii-rmu2.dts b/arch/arm/dts/imx7d-zii-rmu2.dts
new file mode 100644
index 000000000..1d0d631de
--- /dev/null
+++ b/arch/arm/dts/imx7d-zii-rmu2.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+#include "imx7d-zii-rmu2.dtsi"
+#include "imx7d-ddrc.dtsi"
diff --git a/arch/arm/dts/imx7d-zii-rmu2.dtsi b/arch/arm/dts/imx7d-zii-rmu2.dtsi
new file mode 100644
index 000000000..7b36b1c0e
--- /dev/null
+++ b/arch/arm/dts/imx7d-zii-rmu2.dtsi
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device tree file for ZII's RMU2 board
+ *
+ * RMU - Remote Modem Unit
+ *
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include <dt-bindings/thermal/thermal.h>
+#include <arm/imx7d.dtsi>
+
+/ {
+	model = "ZII RMU2 Board";
+	compatible = "zii,imx7d-rmu2", "fsl,imx7d";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&fec1_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fec1_phy: phy@0 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet1_phy_reset>,
+				    <&pinctrl_enet1_phy_interrupt>;
+			reg = <0>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+
+	rave-sp {
+		compatible = "zii,rave-sp-rdu2";
+		current-speed = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-sdio;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	no-sdio;
+	no-sd;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&snvs_pwrkey {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x2
+			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x2
+			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO	0x2
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19         0x59
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO				0x3
+			MX7D_PAD_SD2_WP__ENET1_MDC				0x3
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC		0x1
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0		0x1
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1		0x1
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2		0x1
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3		0x1
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL		0x1
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC		0x1
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0		0x1
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1		0x1
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2		0x1
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3		0x1
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL		0x1
+		>;
+	};
+
+	pinctrl_enet1_phy_reset: enet1phyresetgrp {
+		fsl,pins = <
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x14
+
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_leds_debug: debuggrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x59
+		>;
+	};
+
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX	0x79
+			MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX	0x79
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_DATA0__UART4_DCE_RX	0x79
+			MX7D_PAD_SD2_DATA1__UART4_DCE_TX	0x79
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x59
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_enet1_phy_interrupt: enet1phyinterruptgrp {
+		fsl,phy = <
+			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x08
+		>;
+	};
+};
-- 
2.21.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox