From: Tomaz Solc <tomaz.solc@tablix.org>
To: barebox@lists.infradead.org
Cc: Tomaz Solc <tomaz.solc@tablix.org>
Subject: [PATCH] ARM: rpi: use sdhost for eMMC access on CM3.
Date: Wed, 26 Jun 2019 10:46:49 +0200 [thread overview]
Message-ID: <20190626084649.3385-1-tomaz.solc@tablix.org> (raw)
This commit removes the fix for the upstream devicetree where eMMC was remapped
to the sdhci interface. This is no longer needed since sdhost driver is now
functional in barebox. A similar change was done to the R.Pi 3 devicetree in
9036d1db.
In fact, this remap prevented CM3 from booting if barebox was compiled with
CONFIG_MCI_BCM283X_SDHOST (in rpi_defconfig since b093468c). In that case both
sdhost and sdhci drivers were active and tried to set their corresponsing alt
functions for the same set of GPIOs at the same time.
Signed-off-by: Tomaz Solc <tomaz.solc@tablix.org>
---
arch/arm/dts/bcm2837-rpi-cm3.dts | 7 -------
1 file changed, 7 deletions(-)
diff --git a/arch/arm/dts/bcm2837-rpi-cm3.dts b/arch/arm/dts/bcm2837-rpi-cm3.dts
index cfbffe175..01c1f9a67 100644
--- a/arch/arm/dts/bcm2837-rpi-cm3.dts
+++ b/arch/arm/dts/bcm2837-rpi-cm3.dts
@@ -9,10 +9,3 @@
reg = <0x0 0x0>;
};
};
-
-&sdhci {
- pinctrl-0 = <&emmc_gpio48>;
- no-sd;
- non-removable;
- status = "okay";
-};
--
2.11.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2019-06-26 8:47 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-26 8:46 Tomaz Solc [this message]
2019-06-27 9:07 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190626084649.3385-1-tomaz.solc@tablix.org \
--to=tomaz.solc@tablix.org \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox