From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.92 #3 (Red Hat Linux)) id 1hlIvz-0003hs-Am for barebox@lists.infradead.org; Wed, 10 Jul 2019 20:11:28 +0000 Received: from dude.hi.pengutronix.de ([2001:67c:670:100:1d::7]) by metis.ext.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1hlIvx-00064b-9Y for barebox@lists.infradead.org; Wed, 10 Jul 2019 22:11:21 +0200 Received: from afa by dude.hi.pengutronix.de with local (Exim 4.92) (envelope-from ) id 1hlIvu-0001sq-Jm for barebox@lists.infradead.org; Wed, 10 Jul 2019 22:11:18 +0200 From: Ahmad Fatoum Date: Wed, 10 Jul 2019 22:11:10 +0200 Message-Id: <20190710201112.9086-5-a.fatoum@pengutronix.de> In-Reply-To: <20190710201112.9086-1-a.fatoum@pengutronix.de> References: <20190710201112.9086-1-a.fatoum@pengutronix.de> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 5/7] i2c: add stm32f7 I2C adapter driver To: barebox@lists.infradead.org This patch adds initial support for the STM32F7 I2C controller. It was tested to work with the STM32MP157C. Signed-off-by: Ahmad Fatoum --- drivers/i2c/busses/Kconfig | 5 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-stm32.c | 856 +++++++++++++++++++++++++++++++++ 3 files changed, 862 insertions(+) create mode 100644 drivers/i2c/busses/i2c-stm32.c diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 6d874357b79f..0b762201136f 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -55,4 +55,9 @@ config I2C_VERSATILE Say yes if you want to support the I2C serial bus on ARMs Versatile range of platforms. +config I2C_STM32 + bool "STM32 I2C master driver" + select RESET_CONTROLLER + depends on HAVE_CLK + endmenu diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 61d7c86e7692..7e450ead2738 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_I2C_OMAP) += i2c-omap.o obj-$(CONFIG_I2C_TEGRA) += i2c-tegra.o obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o obj-$(CONFIG_I2C_DESIGNWARE) += i2c-designware.o +obj-$(CONFIG_I2C_STM32) += i2c-stm32.o diff --git a/drivers/i2c/busses/i2c-stm32.c b/drivers/i2c/busses/i2c-stm32.c new file mode 100644 index 000000000000..0ca48df02e92 --- /dev/null +++ b/drivers/i2c/busses/i2c-stm32.c @@ -0,0 +1,856 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2017 STMicroelectronics + * Copyright 2019 Ahmad Fatoum, Pengutronix + */ + +#include +#include +#include +#include +#include +#include + +/* STM32 I2C registers */ +struct __packed stm32_i2c_regs { + u32 cr1; /* I2C control register 1 */ + u32 cr2; /* I2C control register 2 */ + u32 oar1; /* I2C own address 1 register */ + u32 oar2; /* I2C own address 2 register */ + u32 timingr; /* I2C timing register */ + u32 timeoutr; /* I2C timeout register */ + u32 isr; /* I2C interrupt and status register */ + u32 icr; /* I2C interrupt clear register */ + u32 pecr; /* I2C packet error checking register */ + u32 rxdr; /* I2C receive data register */ + u32 txdr; /* I2C transmit data register */ +}; + +#define STM32_I2C_CR1 0x00 +#define STM32_I2C_CR2 0x04 +#define STM32_I2C_TIMINGR 0x10 +#define STM32_I2C_ISR 0x18 +#define STM32_I2C_ICR 0x1C +#define STM32_I2C_RXDR 0x24 +#define STM32_I2C_TXDR 0x28 + +/* STM32 I2C control 1 */ +#define STM32_I2C_CR1_ANFOFF BIT(12) +#define STM32_I2C_CR1_ERRIE BIT(7) +#define STM32_I2C_CR1_TCIE BIT(6) +#define STM32_I2C_CR1_STOPIE BIT(5) +#define STM32_I2C_CR1_NACKIE BIT(4) +#define STM32_I2C_CR1_ADDRIE BIT(3) +#define STM32_I2C_CR1_RXIE BIT(2) +#define STM32_I2C_CR1_TXIE BIT(1) +#define STM32_I2C_CR1_PE BIT(0) + +/* STM32 I2C control 2 */ +#define STM32_I2C_CR2_AUTOEND BIT(25) +#define STM32_I2C_CR2_RELOAD BIT(24) +#define STM32_I2C_CR2_NBYTES_MASK GENMASK(23, 16) +#define STM32_I2C_CR2_NBYTES(n) ((n & 0xff) << 16) +#define STM32_I2C_CR2_NACK BIT(15) +#define STM32_I2C_CR2_STOP BIT(14) +#define STM32_I2C_CR2_START BIT(13) +#define STM32_I2C_CR2_HEAD10R BIT(12) +#define STM32_I2C_CR2_ADD10 BIT(11) +#define STM32_I2C_CR2_RD_WRN BIT(10) +#define STM32_I2C_CR2_SADD10_MASK GENMASK(9, 0) +#define STM32_I2C_CR2_SADD10(n) (n & STM32_I2C_CR2_SADD10_MASK) +#define STM32_I2C_CR2_SADD7_MASK GENMASK(7, 1) +#define STM32_I2C_CR2_SADD7(n) ((n & 0x7f) << 1) +#define STM32_I2C_CR2_RESET_MASK (STM32_I2C_CR2_HEAD10R \ + | STM32_I2C_CR2_NBYTES_MASK \ + | STM32_I2C_CR2_SADD7_MASK \ + | STM32_I2C_CR2_RELOAD \ + | STM32_I2C_CR2_RD_WRN) + +/* STM32 I2C Interrupt Status */ +#define STM32_I2C_ISR_BUSY BIT(15) +#define STM32_I2C_ISR_ARLO BIT(9) +#define STM32_I2C_ISR_BERR BIT(8) +#define STM32_I2C_ISR_TCR BIT(7) +#define STM32_I2C_ISR_TC BIT(6) +#define STM32_I2C_ISR_STOPF BIT(5) +#define STM32_I2C_ISR_NACKF BIT(4) +#define STM32_I2C_ISR_ADDR BIT(3) +#define STM32_I2C_ISR_RXNE BIT(2) +#define STM32_I2C_ISR_TXIS BIT(1) +#define STM32_I2C_ISR_TXE BIT(0) +#define STM32_I2C_ISR_ERRORS (STM32_I2C_ISR_BERR \ + | STM32_I2C_ISR_ARLO) + +/* STM32 I2C Interrupt Clear */ +#define STM32_I2C_ICR_ARLOCF BIT(9) +#define STM32_I2C_ICR_BERRCF BIT(8) +#define STM32_I2C_ICR_STOPCF BIT(5) +#define STM32_I2C_ICR_NACKCF BIT(4) + +/* STM32 I2C Timing */ +#define STM32_I2C_TIMINGR_PRESC(n) ((n & 0xf) << 28) +#define STM32_I2C_TIMINGR_SCLDEL(n) ((n & 0xf) << 20) +#define STM32_I2C_TIMINGR_SDADEL(n) ((n & 0xf) << 16) +#define STM32_I2C_TIMINGR_SCLH(n) ((n & 0xff) << 8) +#define STM32_I2C_TIMINGR_SCLL(n) (n & 0xff) + +#define STM32_I2C_MAX_LEN 0xff + +#define STM32_I2C_DNF_DEFAULT 0 +#define STM32_I2C_DNF_MAX 16 + +#define STM32_I2C_ANALOG_FILTER_ENABLE 1 +#define STM32_I2C_ANALOG_FILTER_DELAY_MIN 50 /* ns */ +#define STM32_I2C_ANALOG_FILTER_DELAY_MAX 260 /* ns */ + +#define STM32_I2C_RISE_TIME_DEFAULT 25 /* ns */ +#define STM32_I2C_FALL_TIME_DEFAULT 10 /* ns */ + +#define STM32_PRESC_MAX BIT(4) +#define STM32_SCLDEL_MAX BIT(4) +#define STM32_SDADEL_MAX BIT(4) +#define STM32_SCLH_MAX BIT(8) +#define STM32_SCLL_MAX BIT(8) + +#define STANDARD_RATE 100000 +#define FAST_RATE 400000 +#define FAST_PLUS_RATE 1000000 + +enum stm32_i2c_speed { + STM32_I2C_SPEED_STANDARD, /* 100 kHz */ + STM32_I2C_SPEED_FAST, /* 400 kHz */ + STM32_I2C_SPEED_FAST_PLUS, /* 1 MHz */ + STM32_I2C_SPEED_END, +}; + +/** + * struct stm32_i2c_spec - private i2c specification timing + * @rate: I2C bus speed (Hz) + * @rate_min: 80% of I2C bus speed (Hz) + * @rate_max: 120% of I2C bus speed (Hz) + * @fall_max: Max fall time of both SDA and SCL signals (ns) + * @rise_max: Max rise time of both SDA and SCL signals (ns) + * @hddat_min: Min data hold time (ns) + * @vddat_max: Max data valid time (ns) + * @sudat_min: Min data setup time (ns) + * @l_min: Min low period of the SCL clock (ns) + * @h_min: Min high period of the SCL clock (ns) + */ + +struct stm32_i2c_spec { + u32 rate; + u32 rate_min; + u32 rate_max; + u32 fall_max; + u32 rise_max; + u32 hddat_min; + u32 vddat_max; + u32 sudat_min; + u32 l_min; + u32 h_min; +}; + +/** + * struct stm32_i2c_setup - private I2C timing setup parameters + * @speed: I2C speed mode (standard, Fast Plus) + * @speed_freq: I2C speed frequency (Hz) + * @clock_src: I2C clock source frequency (Hz) + * @rise_time: Rise time (ns) + * @fall_time: Fall time (ns) + * @dnf: Digital filter coefficient (0-16) + * @analog_filter: Analog filter delay (On/Off) + */ +struct stm32_i2c_setup { + enum stm32_i2c_speed speed; + u32 speed_freq; + u32 clock_src; + u32 rise_time; + u32 fall_time; + u8 dnf; + bool analog_filter; +}; + +/** + * struct stm32_i2c_timings - private I2C output parameters + * @prec: Prescaler value + * @scldel: Data setup time + * @sdadel: Data hold time + * @sclh: SCL high period (master mode) + * @sclh: SCL low period (master mode) + */ +struct stm32_i2c_timings { + struct list_head node; + u8 presc; + u8 scldel; + u8 sdadel; + u8 sclh; + u8 scll; +}; + +static const struct stm32_i2c_spec i2c_specs[] = { + [STM32_I2C_SPEED_STANDARD] = { + .rate = STANDARD_RATE, + .rate_min = 8000, + .rate_max = 120000, + .fall_max = 300, + .rise_max = 1000, + .hddat_min = 0, + .vddat_max = 3450, + .sudat_min = 250, + .l_min = 4700, + .h_min = 4000, + }, + [STM32_I2C_SPEED_FAST] = { + .rate = FAST_RATE, + .rate_min = 320000, + .rate_max = 480000, + .fall_max = 300, + .rise_max = 300, + .hddat_min = 0, + .vddat_max = 900, + .sudat_min = 100, + .l_min = 1300, + .h_min = 600, + }, + [STM32_I2C_SPEED_FAST_PLUS] = { + .rate = FAST_PLUS_RATE, + .rate_min = 800000, + .rate_max = 1200000, + .fall_max = 100, + .rise_max = 120, + .hddat_min = 0, + .vddat_max = 450, + .sudat_min = 50, + .l_min = 500, + .h_min = 260, + }, +}; + +struct stm32_i2c { + struct stm32_i2c_regs __iomem *regs; + struct clk *clk; + struct i2c_adapter adapter; + struct stm32_i2c_setup setup; +}; +#define to_stm32_i2c(a) container_of(a, struct stm32_i2c, adapter) + +static inline int stm32_i2c_check_device_busy(struct stm32_i2c *priv) +{ + u32 status = readl(&priv->regs->isr); + return status & STM32_I2C_ISR_BUSY; +} + +static void stm32_i2c_message_start(struct stm32_i2c *i2c_priv, + struct i2c_msg *msg, bool stop) +{ + struct stm32_i2c_regs *regs = i2c_priv->regs; + u32 cr2 = readl(®s->cr2); + + /* Set transfer direction */ + cr2 &= ~STM32_I2C_CR2_RD_WRN; + if (msg->flags & I2C_M_RD) + cr2 |= STM32_I2C_CR2_RD_WRN; + + /* Set slave address */ + cr2 &= ~(STM32_I2C_CR2_HEAD10R | STM32_I2C_CR2_ADD10); + if (msg->flags & I2C_M_TEN) { + cr2 &= ~STM32_I2C_CR2_SADD10_MASK; + cr2 |= STM32_I2C_CR2_SADD10(msg->addr); + cr2 |= STM32_I2C_CR2_ADD10; + } else { + cr2 &= ~STM32_I2C_CR2_SADD7_MASK; + cr2 |= STM32_I2C_CR2_SADD7(msg->addr); + } + + /* Set nb bytes to transfer and reload or autoend bits */ + cr2 &= ~(STM32_I2C_CR2_NBYTES_MASK | STM32_I2C_CR2_RELOAD | + STM32_I2C_CR2_AUTOEND); + if (msg->len > STM32_I2C_MAX_LEN) { + cr2 |= STM32_I2C_CR2_NBYTES(STM32_I2C_MAX_LEN); + cr2 |= STM32_I2C_CR2_RELOAD; + } else { + cr2 |= STM32_I2C_CR2_NBYTES(msg->len); + } + + /* Write configurations register */ + writel(cr2, ®s->cr2); + + /* START/ReSTART generation */ + setbits_le32(®s->cr2, STM32_I2C_CR2_START); +} + +/* + * RELOAD mode must be selected if total number of data bytes to be + * sent is greater than MAX_LEN + */ + +static void stm32_i2c_handle_reload(struct stm32_i2c *i2c_priv, + struct i2c_msg *msg, bool stop) +{ + struct stm32_i2c_regs *regs = i2c_priv->regs; + u32 cr2 = readl(®s->cr2); + + cr2 &= ~STM32_I2C_CR2_NBYTES_MASK; + + if (msg->len > STM32_I2C_MAX_LEN) { + cr2 |= STM32_I2C_CR2_NBYTES(STM32_I2C_MAX_LEN); + } else { + cr2 &= ~STM32_I2C_CR2_RELOAD; + cr2 |= STM32_I2C_CR2_NBYTES(msg->len); + } + + writel(cr2, ®s->cr2); +} + +static int stm32_i2c_wait_flags(struct stm32_i2c *i2c_priv, + u32 flags, u32 *status) +{ + struct stm32_i2c_regs *regs = i2c_priv->regs; + + return readl_poll_timeout(®s->isr, *status, + *status & flags, USEC_PER_SEC); +} + +static int stm32_i2c_check_end_of_message(struct stm32_i2c *i2c_priv) +{ + struct stm32_i2c_regs *regs = i2c_priv->regs; + u32 mask = STM32_I2C_ISR_ERRORS | STM32_I2C_ISR_NACKF | + STM32_I2C_ISR_STOPF; + u32 status; + int ret; + + ret = stm32_i2c_wait_flags(i2c_priv, mask, &status); + if (ret) + return ret; + + if (status & STM32_I2C_ISR_BERR) { + debug("%s: Bus error\n", __func__); + + /* Clear BERR flag */ + setbits_le32(®s->icr, STM32_I2C_ICR_BERRCF); + + return -EIO; + } + + if (status & STM32_I2C_ISR_ARLO) { + debug("%s: Arbitration lost\n", __func__); + + /* Clear ARLO flag */ + setbits_le32(®s->icr, STM32_I2C_ICR_ARLOCF); + + return -EAGAIN; + } + + if (status & STM32_I2C_ISR_NACKF) { + debug("%s: Receive NACK\n", __func__); + + /* Clear NACK flag */ + setbits_le32(®s->icr, STM32_I2C_ICR_NACKCF); + + /* Wait until STOPF flag is set */ + mask = STM32_I2C_ISR_STOPF; + ret = stm32_i2c_wait_flags(i2c_priv, mask, &status); + if (ret) + return ret; + + ret = -EIO; + } + + if (status & STM32_I2C_ISR_STOPF) { + /* Clear STOP flag */ + setbits_le32(®s->icr, STM32_I2C_ICR_STOPCF); + + /* Clear control register 2 */ + setbits_le32(®s->cr2, STM32_I2C_CR2_RESET_MASK); + } + + return ret; +} + +static int stm32_i2c_message_xfer(struct stm32_i2c *i2c_priv, + struct i2c_msg *msg, bool stop) +{ + struct stm32_i2c_regs *regs = i2c_priv->regs; + u32 status; + u32 mask = msg->flags & I2C_M_RD ? STM32_I2C_ISR_RXNE : + STM32_I2C_ISR_TXIS | STM32_I2C_ISR_NACKF; + int bytes_to_rw = msg->len > STM32_I2C_MAX_LEN ? + STM32_I2C_MAX_LEN : msg->len; + int ret = 0; + + /* Add errors */ + mask |= STM32_I2C_ISR_ERRORS; + + stm32_i2c_message_start(i2c_priv, msg, stop); + + while (msg->len) { + /* + * Wait until TXIS/NACKF/BERR/ARLO flags or + * RXNE/BERR/ARLO flags are set + */ + ret = stm32_i2c_wait_flags(i2c_priv, mask, &status); + if (ret) + break; + + if (status & (STM32_I2C_ISR_NACKF | STM32_I2C_ISR_ERRORS)) + break; + + if (status & STM32_I2C_ISR_RXNE) { + *msg->buf++ = readb(®s->rxdr); + msg->len--; + bytes_to_rw--; + } + + if (status & STM32_I2C_ISR_TXIS) { + writeb(*msg->buf++, ®s->txdr); + msg->len--; + bytes_to_rw--; + } + + if (!bytes_to_rw && msg->len) { + /* Wait until TCR flag is set */ + mask = STM32_I2C_ISR_TCR; + ret = stm32_i2c_wait_flags(i2c_priv, mask, &status); + if (ret) + break; + + bytes_to_rw = msg->len > STM32_I2C_MAX_LEN ? + STM32_I2C_MAX_LEN : msg->len; + mask = msg->flags & I2C_M_RD ? STM32_I2C_ISR_RXNE : + STM32_I2C_ISR_TXIS | STM32_I2C_ISR_NACKF; + + stm32_i2c_handle_reload(i2c_priv, msg, stop); + } else if (!bytes_to_rw) { + /* Wait until TC flag is set */ + mask = STM32_I2C_ISR_TC; + ret = stm32_i2c_wait_flags(i2c_priv, mask, &status); + if (ret) + break; + + if (!stop) + /* Message sent, new message has to be sent */ + return 0; + } + } + + /* End of transfer, send stop condition */ + mask = STM32_I2C_CR2_STOP; + setbits_le32(®s->cr2, mask); + + return stm32_i2c_check_end_of_message(i2c_priv); +} + +static int stm32_i2c_xfer(struct i2c_adapter *adapter, + struct i2c_msg *msg, int nmsgs) +{ + struct stm32_i2c *i2c_priv = to_stm32_i2c(adapter); + int ret; + int i; + + ret = stm32_i2c_check_device_busy(i2c_priv); + if (ret) + return -EBUSY; + + for (i = 0; i < nmsgs; i++) { + ret = stm32_i2c_message_xfer(i2c_priv, &msg[i], i == nmsgs - 1); + if (ret) + return ret; + } + + return nmsgs; +} + + +static int stm32_i2c_compute_solutions(struct stm32_i2c_setup *setup, + struct list_head *solutions) +{ + struct stm32_i2c_timings *v; + u32 p_prev = STM32_PRESC_MAX; + u32 i2cclk = DIV_ROUND_CLOSEST(NSEC_PER_SEC, setup->clock_src); + u32 af_delay_min, af_delay_max; + u16 p, l, a; + int sdadel_min, sdadel_max, scldel_min; + int ret = 0; + + af_delay_min = setup->analog_filter ? + STM32_I2C_ANALOG_FILTER_DELAY_MIN : 0; + af_delay_max = setup->analog_filter ? + STM32_I2C_ANALOG_FILTER_DELAY_MAX : 0; + + sdadel_min = i2c_specs[setup->speed].hddat_min + setup->fall_time - + af_delay_min - (setup->dnf + 3) * i2cclk; + + sdadel_max = i2c_specs[setup->speed].vddat_max - setup->rise_time - + af_delay_max - (setup->dnf + 4) * i2cclk; + + scldel_min = setup->rise_time + i2c_specs[setup->speed].sudat_min; + + if (sdadel_min < 0) + sdadel_min = 0; + if (sdadel_max < 0) + sdadel_max = 0; + + debug("%s: SDADEL(min/max): %i/%i, SCLDEL(Min): %i\n", __func__, + sdadel_min, sdadel_max, scldel_min); + + /* Compute possible values for PRESC, SCLDEL and SDADEL */ + for (p = 0; p < STM32_PRESC_MAX; p++) { + for (l = 0; l < STM32_SCLDEL_MAX; l++) { + u32 scldel = (l + 1) * (p + 1) * i2cclk; + + if (scldel < scldel_min) + continue; + + for (a = 0; a < STM32_SDADEL_MAX; a++) { + u32 sdadel = (a * (p + 1) + 1) * i2cclk; + + if (((sdadel >= sdadel_min) && + (sdadel <= sdadel_max)) && + (p != p_prev)) { + v = calloc(1, sizeof(*v)); + if (!v) + return -ENOMEM; + + v->presc = p; + v->scldel = l; + v->sdadel = a; + p_prev = p; + + list_add_tail(&v->node, solutions); + break; + } + } + + if (p_prev == p) + break; + } + } + + if (list_empty(solutions)) { + pr_err("%s: no Prescaler solution\n", __func__); + ret = -EPERM; + } + + return ret; +} + +static int stm32_i2c_choose_solution(struct stm32_i2c_setup *setup, + struct list_head *solutions, + struct stm32_i2c_timings *s) +{ + struct stm32_i2c_timings *v; + u32 i2cbus = DIV_ROUND_CLOSEST(NSEC_PER_SEC, setup->speed_freq); + u32 clk_error_prev = i2cbus; + u32 i2cclk = DIV_ROUND_CLOSEST(NSEC_PER_SEC, setup->clock_src); + u32 clk_min, clk_max; + u32 af_delay_min; + u32 dnf_delay; + u32 tsync; + u16 l, h; + bool sol_found = false; + int ret = 0; + + af_delay_min = setup->analog_filter ? + STM32_I2C_ANALOG_FILTER_DELAY_MIN : 0; + dnf_delay = setup->dnf * i2cclk; + + tsync = af_delay_min + dnf_delay + (2 * i2cclk); + clk_max = NSEC_PER_SEC / i2c_specs[setup->speed].rate_min; + clk_min = NSEC_PER_SEC / i2c_specs[setup->speed].rate_max; + + /* + * Among Prescaler possibilities discovered above figures out SCL Low + * and High Period. Provided: + * - SCL Low Period has to be higher than Low Period of the SCL Clock + * defined by I2C Specification. I2C Clock has to be lower than + * (SCL Low Period - Analog/Digital filters) / 4. + * - SCL High Period has to be lower than High Period of the SCL Clock + * defined by I2C Specification + * - I2C Clock has to be lower than SCL High Period + */ + list_for_each_entry(v, solutions, node) { + u32 prescaler = (v->presc + 1) * i2cclk; + + for (l = 0; l < STM32_SCLL_MAX; l++) { + u32 tscl_l = (l + 1) * prescaler + tsync; + + if ((tscl_l < i2c_specs[setup->speed].l_min) || + (i2cclk >= + ((tscl_l - af_delay_min - dnf_delay) / 4))) { + continue; + } + + for (h = 0; h < STM32_SCLH_MAX; h++) { + u32 tscl_h = (h + 1) * prescaler + tsync; + u32 tscl = tscl_l + tscl_h + + setup->rise_time + setup->fall_time; + + if ((tscl >= clk_min) && (tscl <= clk_max) && + (tscl_h >= i2c_specs[setup->speed].h_min) && + (i2cclk < tscl_h)) { + int clk_error = tscl - i2cbus; + + if (clk_error < 0) + clk_error = -clk_error; + + if (clk_error < clk_error_prev) { + clk_error_prev = clk_error; + v->scll = l; + v->sclh = h; + sol_found = true; + memcpy(s, v, sizeof(*s)); + } + } + } + } + } + + if (!sol_found) { + pr_err("%s: no solution at all\n", __func__); + ret = -EPERM; + } + + return ret; +} + +static int stm32_i2c_compute_timing(struct stm32_i2c *i2c_priv, + struct stm32_i2c_setup *setup, + struct stm32_i2c_timings *output) +{ + struct stm32_i2c_timings *v, *_v; + struct list_head solutions; + int ret; + + if (setup->speed >= STM32_I2C_SPEED_END) { + pr_err("%s: speed out of bound {%d/%d}\n", __func__, + setup->speed, STM32_I2C_SPEED_END - 1); + return -EINVAL; + } + + if ((setup->rise_time > i2c_specs[setup->speed].rise_max) || + (setup->fall_time > i2c_specs[setup->speed].fall_max)) { + pr_err("%s :timings out of bound Rise{%d>%d}/Fall{%d>%d}\n", + __func__, + setup->rise_time, i2c_specs[setup->speed].rise_max, + setup->fall_time, i2c_specs[setup->speed].fall_max); + return -EINVAL; + } + + if (setup->dnf > STM32_I2C_DNF_MAX) { + pr_err("%s: DNF out of bound %d/%d\n", __func__, + setup->dnf, STM32_I2C_DNF_MAX); + return -EINVAL; + } + + if (setup->speed_freq > i2c_specs[setup->speed].rate) { + pr_err("%s: Freq {%d/%d}\n", __func__, + setup->speed_freq, i2c_specs[setup->speed].rate); + return -EINVAL; + } + + INIT_LIST_HEAD(&solutions); + ret = stm32_i2c_compute_solutions(setup, &solutions); + if (ret) + goto exit; + + ret = stm32_i2c_choose_solution(setup, &solutions, output); + if (ret) + goto exit; + + debug("%s: Presc: %i, scldel: %i, sdadel: %i, scll: %i, sclh: %i\n", + __func__, output->presc, + output->scldel, output->sdadel, + output->scll, output->sclh); + +exit: + /* Release list and memory */ + list_for_each_entry_safe(v, _v, &solutions, node) { + list_del(&v->node); + free(v); + } + + return ret; +} + +static int stm32_i2c_setup_timing(struct stm32_i2c *i2c_priv, + enum stm32_i2c_speed speed, + struct stm32_i2c_timings *timing) +{ + struct stm32_i2c_setup *setup = &i2c_priv->setup; + int ret = 0; + + setup->speed = speed; + setup->speed_freq = i2c_specs[setup->speed].rate; + setup->clock_src = clk_get_rate(i2c_priv->clk); + + if (!setup->clock_src) { + pr_err("%s: clock rate is 0\n", __func__); + return -EINVAL; + } + + do { + ret = stm32_i2c_compute_timing(i2c_priv, setup, timing); + if (ret) { + debug("%s: failed to compute I2C timings.\n", + __func__); + if (speed > STM32_I2C_SPEED_STANDARD) { + speed--; + setup->speed = speed; + setup->speed_freq = i2c_specs[setup->speed].rate; + debug("%s: downgrade I2C Speed Freq to (%i)\n", + __func__, i2c_specs[setup->speed].rate); + } else { + break; + } + } + } while (ret); + + if (ret) { + pr_err("%s: impossible to compute I2C timings.\n", __func__); + return ret; + } + + debug("%s: I2C Speed(%i), Freq(%i), Clk Source(%i)\n", __func__, + setup->speed, setup->speed_freq, setup->clock_src); + debug("%s: I2C Rise(%i) and Fall(%i) Time\n", __func__, + setup->rise_time, setup->fall_time); + debug("%s: I2C Analog Filter(%s), DNF(%i)\n", __func__, + setup->analog_filter ? "On" : "Off", setup->dnf); + + return 0; +} + +static int stm32_i2c_hw_config(struct stm32_i2c *i2c_priv, + enum stm32_i2c_speed speed) +{ + struct stm32_i2c_regs *regs = i2c_priv->regs; + struct stm32_i2c_timings t; + int ret; + u32 timing = 0; + + ret = stm32_i2c_setup_timing(i2c_priv, speed, &t); + if (ret) + return ret; + + /* Disable I2C */ + clrbits_le32(®s->cr1, STM32_I2C_CR1_PE); + + /* Timing settings */ + timing |= STM32_I2C_TIMINGR_PRESC(t.presc); + timing |= STM32_I2C_TIMINGR_SCLDEL(t.scldel); + timing |= STM32_I2C_TIMINGR_SDADEL(t.sdadel); + timing |= STM32_I2C_TIMINGR_SCLH(t.sclh); + timing |= STM32_I2C_TIMINGR_SCLL(t.scll); + writel(timing, ®s->timingr); + + /* Enable I2C */ + if (i2c_priv->setup.analog_filter) + clrbits_le32(®s->cr1, STM32_I2C_CR1_ANFOFF); + else + setbits_le32(®s->cr1, STM32_I2C_CR1_ANFOFF); + setbits_le32(®s->cr1, STM32_I2C_CR1_PE); + + return 0; +} + +static int stm32_i2c_set_bus_speed(struct stm32_i2c *i2c_priv, unsigned speed) +{ + enum stm32_i2c_speed stm32_speed; + switch (speed) { + case STANDARD_RATE: + stm32_speed = STM32_I2C_SPEED_STANDARD; + break; + case FAST_RATE: + stm32_speed = STM32_I2C_SPEED_FAST; + break; + case FAST_PLUS_RATE: + stm32_speed = STM32_I2C_SPEED_FAST_PLUS; + break; + default: + pr_warn("%s: Speed %d not supported\n", __func__, speed); + return -EINVAL; + } + + return stm32_i2c_hw_config(i2c_priv, stm32_speed); +} + +static int __init stm32_i2c_probe(struct device_d *dev) +{ + struct device_node *np = dev->device_node; + struct resource *iores; + struct stm32_i2c *stm32_i2c; + struct i2c_platform_data *pdata; + struct reset_control *rst; + const struct stm32_i2c_setup *setup; + int bitrate; + int ret; + + pdata = dev->platform_data; + + stm32_i2c = xzalloc(sizeof(*stm32_i2c)); + + stm32_i2c->clk = clk_get(dev, NULL); + if (IS_ERR(stm32_i2c->clk)) + return PTR_ERR(stm32_i2c->clk); + clk_enable(stm32_i2c->clk); + + rst = reset_control_get(dev, NULL); + if (IS_ERR(rst)) + return PTR_ERR(rst); + + reset_control_assert(rst); + udelay(2); + reset_control_deassert(rst); + + ret = dev_get_drvdata(dev, (const void **)&setup); + if (ret) + return ret; + + stm32_i2c->setup = *setup; + + of_property_read_u32(np, "i2c-scl-rising-time-ns", + &stm32_i2c->setup.rise_time); + of_property_read_u32(np, "i2c-scl-falling-time-ns", + &stm32_i2c->setup.fall_time); + + /* Setup stm32_i2c driver structure */ + stm32_i2c->adapter.master_xfer = stm32_i2c_xfer; + stm32_i2c->adapter.nr = dev->id; + stm32_i2c->adapter.dev.parent = dev; + stm32_i2c->adapter.dev.device_node = dev->device_node; + iores = dev_request_mem_resource(dev, 0); + if (IS_ERR(iores)) + return PTR_ERR(iores); + + stm32_i2c->regs = IOMEM(iores->start); + + bitrate = STANDARD_RATE; + of_property_read_u32(dev->device_node, "clock-frequency", &bitrate); + if (pdata && pdata->bitrate) + bitrate = pdata->bitrate; + + ret = stm32_i2c_set_bus_speed(stm32_i2c, bitrate); + if (ret) + return ret; + + return i2c_add_numbered_adapter(&stm32_i2c->adapter); +} + +static const struct stm32_i2c_setup stm32f7_setup = { + .rise_time = STM32_I2C_RISE_TIME_DEFAULT, + .fall_time = STM32_I2C_FALL_TIME_DEFAULT, + .dnf = STM32_I2C_DNF_DEFAULT, + .analog_filter = STM32_I2C_ANALOG_FILTER_ENABLE, +}; + +static __maybe_unused struct of_device_id stm32_i2c_dt_ids[] = { + { .compatible = "st,stm32f7-i2c", .data = &stm32f7_setup, }, + { /* sentinel */ } +}; + +static struct driver_d stm32_i2c_driver = { + .probe = stm32_i2c_probe, + .name = "stm32f7-i2c", + .of_compatible = DRV_OF_COMPAT(stm32_i2c_dt_ids), +}; +coredevice_platform_driver(stm32_i2c_driver); -- 2.20.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox