From: Sascha Hauer <s.hauer@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 5/7] i2c: add stm32f7 I2C adapter driver
Date: Fri, 12 Jul 2019 07:09:31 +0200 [thread overview]
Message-ID: <20190712050931.5icq2vgdd5uobvzw@pengutronix.de> (raw)
In-Reply-To: <20190710201112.9086-5-a.fatoum@pengutronix.de>
On Wed, Jul 10, 2019 at 10:11:10PM +0200, Ahmad Fatoum wrote:
> +
> +static int stm32_i2c_check_end_of_message(struct stm32_i2c *i2c_priv)
> +{
> + struct stm32_i2c_regs *regs = i2c_priv->regs;
> + u32 mask = STM32_I2C_ISR_ERRORS | STM32_I2C_ISR_NACKF |
> + STM32_I2C_ISR_STOPF;
> + u32 status;
> + int ret;
> +
> + ret = stm32_i2c_wait_flags(i2c_priv, mask, &status);
> + if (ret)
> + return ret;
> +
> + if (status & STM32_I2C_ISR_BERR) {
> + debug("%s: Bus error\n", __func__);
Please replace with dev_dbg and friends.
> +
> +static int stm32_i2c_message_xfer(struct stm32_i2c *i2c_priv,
> + struct i2c_msg *msg, bool stop)
> +{
> + struct stm32_i2c_regs *regs = i2c_priv->regs;
> + u32 status;
> + u32 mask = msg->flags & I2C_M_RD ? STM32_I2C_ISR_RXNE :
> + STM32_I2C_ISR_TXIS | STM32_I2C_ISR_NACKF;
> + int bytes_to_rw = msg->len > STM32_I2C_MAX_LEN ?
> + STM32_I2C_MAX_LEN : msg->len;
> + int ret = 0;
> +
> + /* Add errors */
> + mask |= STM32_I2C_ISR_ERRORS;
> +
> + stm32_i2c_message_start(i2c_priv, msg, stop);
> +
> + while (msg->len) {
> + /*
> + * Wait until TXIS/NACKF/BERR/ARLO flags or
> + * RXNE/BERR/ARLO flags are set
> + */
> + ret = stm32_i2c_wait_flags(i2c_priv, mask, &status);
> + if (ret)
> + break;
> +
> + if (status & (STM32_I2C_ISR_NACKF | STM32_I2C_ISR_ERRORS))
> + break;
> +
> + if (status & STM32_I2C_ISR_RXNE) {
> + *msg->buf++ = readb(®s->rxdr);
> + msg->len--;
The driver shouldn't modify the message. Please create local variables
for the length counter and buf pointer.
> +
> +static int __init stm32_i2c_probe(struct device_d *dev)
> +{
> + struct device_node *np = dev->device_node;
> + struct resource *iores;
> + struct stm32_i2c *stm32_i2c;
> + struct i2c_platform_data *pdata;
> + struct reset_control *rst;
> + const struct stm32_i2c_setup *setup;
> + int bitrate;
> + int ret;
> +
> + pdata = dev->platform_data;
> +
> + stm32_i2c = xzalloc(sizeof(*stm32_i2c));
> +
> + stm32_i2c->clk = clk_get(dev, NULL);
> + if (IS_ERR(stm32_i2c->clk))
> + return PTR_ERR(stm32_i2c->clk);
> + clk_enable(stm32_i2c->clk);
> +
> + rst = reset_control_get(dev, NULL);
> + if (IS_ERR(rst))
> + return PTR_ERR(rst);
> +
> + reset_control_assert(rst);
> + udelay(2);
> + reset_control_deassert(rst);
> +
> + ret = dev_get_drvdata(dev, (const void **)&setup);
> + if (ret)
> + return ret;
> +
> + stm32_i2c->setup = *setup;
> +
> + of_property_read_u32(np, "i2c-scl-rising-time-ns",
> + &stm32_i2c->setup.rise_time);
> + of_property_read_u32(np, "i2c-scl-falling-time-ns",
> + &stm32_i2c->setup.fall_time);
The Kernel has a helper function for reading these generic properties.
Can we have a similar function?
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2019-07-12 5:09 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-10 20:11 [PATCH 1/7] gpio: allow for arch-specific ARCH_NR_GPIOS > 256 Ahmad Fatoum
2019-07-10 20:11 ` [PATCH 2/7] ARM: stm32mp: set CONFIG_ARCH_NR_GPIO = (26 * 16) Ahmad Fatoum
2019-07-10 20:11 ` [PATCH 3/7] ARM: dts: stm32mp157c: correct gpioz id Ahmad Fatoum
2019-07-10 20:11 ` [PATCH 4/7] reset: add reset controller driver for STM32 RCC Ahmad Fatoum
2019-07-10 21:28 ` [PATCH] fixup! " Ahmad Fatoum
2019-07-10 20:11 ` [PATCH 5/7] i2c: add stm32f7 I2C adapter driver Ahmad Fatoum
2019-07-12 5:09 ` Sascha Hauer [this message]
2019-07-10 20:11 ` [PATCH 6/7] mfd: add support for STPMIC1 Ahmad Fatoum
2019-07-10 20:11 ` [PATCH 7/7] watchdog: add support for STPMIC1 integrated watchdog Ahmad Fatoum
2019-07-15 6:42 ` [PATCH 1/7] gpio: allow for arch-specific ARCH_NR_GPIOS > 256 Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190712050931.5icq2vgdd5uobvzw@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox