From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH v3 1/6] clk: imx6: fix use of cpu_is_mx6* before they are initialized
Date: Wed, 17 Jul 2019 19:05:59 +0200 [thread overview]
Message-ID: <20190717170604.23732-2-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20190717170604.23732-1-a.fatoum@pengutronix.de>
The cpu_is_mx6* macros rely on __imx_cpu_type, which is initialized
dependent on device tree compatible at "postcore" init-level imx_init.
The imx6q-ccm driver, which uses the cpu_is_mx6* macros, is registered
at "core" init-level, however. This results on the macro always returning
false.
Fix this by using the cpu_mx6_is_mx6* family of macros instead.
These already require that that CPU is a MX6, which is safe because the
the driver only matches against "fsl,imx6q-ccm".
Only exception is the video5 pll reparenting. Here we will just
maintain the old behavior as we will drop the if clause in a following
commit anyway.
Reported-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
drivers/clk/imx/clk-imx6.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/imx/clk-imx6.c b/drivers/clk/imx/clk-imx6.c
index 35b995dae24e..0b71a1322466 100644
--- a/drivers/clk/imx/clk-imx6.c
+++ b/drivers/clk/imx/clk-imx6.c
@@ -59,9 +59,9 @@
static struct clk *clks[IMX6QDL_CLK_END];
static struct clk_onecell_data clk_data;
-static inline int cpu_is_plus(void)
+static inline int cpu_mx6_is_plus(void)
{
- return cpu_is_mx6qp() || cpu_is_mx6dp();
+ return cpu_mx6_is_mx6qp() || cpu_mx6_is_mx6dp();
}
static const char *step_sels[] = {
@@ -341,8 +341,7 @@ static void imx6_add_video_clks(void __iomem *anab, void __iomem *cb)
clk_set_parent(clks[IMX6QDL_CLK_IPU2_DI0_PRE_SEL], clks[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
clk_set_parent(clks[IMX6QDL_CLK_IPU2_DI1_PRE_SEL], clks[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
- if ((imx_silicon_revision() != IMX_CHIP_REV_1_0) ||
- cpu_is_mx6dl()) {
+ if (imx_silicon_revision() != IMX_CHIP_REV_1_0) {
clk_set_parent(clks[IMX6QDL_CLK_LDB_DI0_SEL], clks[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
clk_set_parent(clks[IMX6QDL_CLK_LDB_DI1_SEL], clks[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
}
@@ -418,7 +417,7 @@ static int imx6_ccm_probe(struct device_d *dev)
clks[IMX6QDL_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
clks[IMX6QDL_CLK_USDHC3_SEL] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
clks[IMX6QDL_CLK_USDHC4_SEL] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
- if (cpu_is_plus())
+ if (cpu_mx6_is_plus())
clks[IMX6QDL_CLK_ENFC_SEL] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels_plus, ARRAY_SIZE(enfc_sels_plus));
else
clks[IMX6QDL_CLK_ENFC_SEL] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels));
@@ -469,7 +468,7 @@ static int imx6_ccm_probe(struct device_d *dev)
clks[IMX6QDL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2);
clks[IMX6QDL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4);
clks[IMX6QDL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6);
- if (cpu_is_mx6dl())
+ if (cpu_mx6_is_mx6dl())
clks[IMX6DL_CLK_I2C4] = imx_clk_gate2("i2c4", "ipg_per", base + 0x6c, 8);
else
clks[IMX6Q_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8);
--
2.20.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2019-07-17 17:06 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-17 17:05 [PATCH v3 0/6] clk: imx6: work around LDB hang caused by ERR009219 Ahmad Fatoum
2019-07-17 17:05 ` Ahmad Fatoum [this message]
2019-07-17 17:10 ` [PATCH v3 1/6] clk: imx6: fix use of cpu_is_mx6* before they are initialized Ahmad Fatoum
2019-07-18 15:51 ` Ahmad Fatoum
2019-07-17 17:06 ` [PATCH v3 2/6] clk: imx6: Mask mmdc_ch1 handshake for periph2_sel and mmdc_ch1_axi_podf Ahmad Fatoum
2019-07-17 17:06 ` [PATCH v3 3/6] clk: imx6: remove quirky clk_set_parent(LDB_diN_sel, pll5_video_div) Ahmad Fatoum
2019-07-17 17:06 ` [PATCH v3 4/6] clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only Ahmad Fatoum
2019-07-18 8:19 ` Roland Hieber
2019-07-18 8:25 ` Ahmad Fatoum
2019-07-18 8:33 ` Roland Hieber
2019-08-05 10:22 ` Sascha Hauer
2019-07-17 17:06 ` [PATCH v3 5/6] clk: imx6: Fix procedure to switch the parent of LDB_DI_CLK Ahmad Fatoum
2019-09-10 13:15 ` Sascha Hauer
2019-09-10 14:07 ` Ahmad Fatoum
2019-07-17 17:06 ` [PATCH v3 6/6] clk: imx6: define an enum for ldb mux inputs Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190717170604.23732-2-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox