[PATCH] fixup! Documentation: boards: add initial STM32MP documentation

[PATCH] fixup! Documentation: boards: add initial STM32MP documentation

[Ahmad Fatoum]

Left-over line spotted by Roland. The boards are listed in the section
following this.
---
 Documentation/boards/stm32mp.rst | 2 --
 1 file changed, 2 deletions(-)

diff --git a/Documentation/boards/stm32mp.rst b/Documentation/boards/stm32mp.rst
index 8cbf36c3961e..24cf8859db8d 100644
--- a/Documentation/boards/stm32mp.rst
+++ b/Documentation/boards/stm32mp.rst
@@ -22,8 +22,6 @@ header-less image ending in ``*.pblb`` as well.
 
 Use of barebox as FSBL is not supported.
 
-Following boards are currently supported in barebox:
-
 Building barebox
 ----------------
 
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH] fixup! Documentation: boards: add initial STM32MP documentation

[Sascha Hauer]

On Sat, Aug 03, 2019 at 07:33:58PM +0200, Ahmad Fatoum wrote:
> Left-over line spotted by Roland. The boards are listed in the section
> following this.
> ---
>  Documentation/boards/stm32mp.rst | 2 --
>  1 file changed, 2 deletions(-)

Applied, thanks

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH] fixup! Documentation: boards: add initial STM32MP documentation

[Ahmad Fatoum]

Fix typo: TF-A is FSBL, barebox is SSBL
---
 Documentation/boards/stm32mp.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/boards/stm32mp.rst b/Documentation/boards/stm32mp.rst
index 7f787bac203e..8cbf36c3961e 100644
--- a/Documentation/boards/stm32mp.rst
+++ b/Documentation/boards/stm32mp.rst
@@ -16,7 +16,7 @@ SYSRAM and executed. The FSBL sets up the SDRAM, install a secure monitor and
 then the second stage boot loader (SSBL) is loaded into DRAM.
 
 When building barebox, the resulting ``barebox-${board}.img`` file has the STM32
-header preprended, so it can be loaded directly as FSBL by the ARM TF-A
+header preprended, so it can be loaded directly as SSBL by the ARM TF-A
 (https://github.com/ARM-software/arm-trusted-firmware). Each entry point has a
 header-less image ending in ``*.pblb`` as well.
 
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox