From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: v2019.08.0
Date: Wed, 14 Aug 2019 10:47:09 +0200 [thread overview]
Message-ID: <20190814084708.em7vxkvo5ijkprdy@pengutronix.de> (raw)
Hi All,
The release for August is out.
The changes most worth noting this time come from Ahmad. The STM32MP1
support continues to materialize in form of a watchdog driver, a pinmux
driver and several other improvements. Of course there's also a bunch
of improvements, see below.
Thanks all for working on this project and keeping it alive :)
Have Fun!
Sascha
----------------------------------------------------------------
Ahmad Fatoum (21):
commands: don't use stale errno when calling fb_open
treewide: remove stale mentions of CONFIG_OF in comments
ARM: stm32mp1: rename to stm32mp
reset_source: add new Brownout reset (BOR) source
ARM: stm32mp: stm32mp157c-dk2: compress the DTB
ARM: stm32mp: add entry point, not point.pblb to pblb-y
Documentation: reset-reason: document new BROWNOUT reason
watchdog: add stm32 watchdog and reset driver
ARM: stm32mp: enable watchdog in defconfig
ARM: dts: stm32mp157a-dk1.dts: include upstream dts before barebox'
ARM: dts: stm32mp: factor out common DK nodes into dtsi
gpiolib: add gpio_get_chip helper
driver: add stubs for hardware spinlocks
pinctrl: add driver for STM32 GPIO and pin multiplexer
ARM: dts: stm32mp157a-dk1: enable heartbeat and error LEDs
ARM: stm32mp: turn on GPIO related options
ARM: psci: fix erroneous call of ->system_reset on system_off
ARM: sm: move get_gicd_base_address to header for reuse
pinctrl: stm32: add debug output in set_state callback
pinctrl: stm32: fix error path when gpio chip is not found
watchdog: stm32_iwdg: remove left-over comment
Andrey Smirnov (10):
ARM: i.MX: zii-vf610-dev-rev-b: Use SPDX tag in DTS
ARM: i.MX: zii-vf610-dev-rev-c: Use SPDX tag in DTS
ARM: i.MX: zii-vf610-dev-rev-b: Fix DTS warning
ARM: i.MX: zii-vf610-dev-rev-c: Fix DTS warning
Documentation: zii-vf610-dev: Add necessary post reset delay
Documentation: zii-vf610-dev: Reconcile DDR setup with DCD
Documentation: zii: Fix buggy check_bits_set_32
ARM: Rename zii-imx7d-rpu2 to zii-imx7d-dev
ARM: imx7d-zii-rpu2: Switch to using kernel DTS
ARM: zii-imx7d-dev: Add support for RMU2 board
Antony Pavlov (11):
MIPS: fix 'assignment makes integer from pointer without a cast' warning
MIPS: lib/Makefile: fix whitespaces
MIPS: relocate_code: fix barebox image memcpy() size
MIPS: Kconfig: move ARCH_TEXT_BASE to top mips Kconfig file
Documentation: user manual: update MIPS-specific targets
serial: ar933x: set linux_console_name
MIPS: dts: tplink-mr3020: add missing stdout-path property
scripts: add mips-relocs to .gitignore
sandbox: prevent segfault in tap_alloc()
sandbox: eliminale no previous prototype for ‘sandbox_add_device’ warning
sandbox: drop blank lines at EOF
Cory Tusar (1):
ARM: zii-vf610-dev: Trivial spelling fix
Daniel Schultz (2):
ARM: dts: imx6qdl: phycore: Add state framework
ARM: dts: imx6ul: phycore: Add state framework
Gwenhael Goavec-Merou (3):
ARM: socfpga: terasic-de0-nano-soc: update handoff files to 18.1
ARM: socfpga: terasic-de0-nano-soc: add missing SECT() macro for iocsr_scan_chain3_table
ARM: socfpga: terasic-de0-nano-soc: statify sys_mgr_init_table
Marcin Niestroj (6):
clk: divider: Remove unused variable in clk_divider_recalc_rate
mfd: syscon: add syscon_regmap_lookup_by_phandle()
serial: ns16550: support reg-offset device-tree property
clk: divider: Fix best div calculation for power-of-two and table dividers
clk: divider: Make generic for usage elsewhere
clk: divider: export clk_div_mask() helper
Marco Felsch (5):
usb: usb251xb: fix optional reset gpio request
ARM: phytec-som-imx6: update automount net entries
defaultenv-2: net: fix comment
commands: mmc_extcsd: fix extcsd value meanings
i2c: gpio: add sda/scl-gpios property support
Masahiro Yamada (2):
kbuild: do not drop -I without parameter
kconfig: update to Linux 5.2-rc4
Oleksij Rempel (2):
add CONFIG_PBL_BREAK option
mips: reloc: remove outdated comment
Peter Mamonov (1):
pbl: report decompression failure
Rob Stacey (1):
IMX: do_hab calls strcat on uninitialised memory
Rouven Czerwinski (4):
i.MX: HABv4: use min_t instead of min
add gdb helper scripts to load barebox symbols
blspec: invalidate only necessary bootm variables
f_fastboot: remove only image from bootm variables
Sascha Hauer (22):
dts: update to v5.2-rc4
Regenerate defconfig files
startup: remove unused editcmd variable
startup: Create global.linux.bootargs.dyn.* variables where they are needed
startup: Create boot related variables where they are used
startup: Factor out the autoboot counter to separate function
pstore: Only capture log messages
pstore: remove unused code
dts: update to v5.2-rc6
Merge branch 'for-next/Kconfig'
Merge branch 'for-next/clk'
Merge branch 'for-next/dts'
Merge branch 'for-next/imx'
Merge branch 'for-next/mips'
Merge branch 'for-next/misc'
Merge branch 'for-next/mvebu'
Merge branch 'for-next/pstore'
Merge branch 'for-next/sandbox'
Merge branch 'for-next/socfpga'
Merge branch 'for-next/stm32'
Merge branch 'for-next/zii'
Merge https://github.com/robostac/barebox
Stefan Riedmueller (10):
ARM: dts: imx6qdl: phycore: Set phy-reset-duration for fec
ARM: dts: imx6ul: phycore: Reduce eth drive strength
ARM: mach-imx: imx6: Read and print the UID of i.MX6 SOCs
ARM: phytec-som-imx6: Add low cost variant for imx6dl phycore
ARM: dts: imx6ul: phycore: Add eeprom label
ARM: imx6ul: phycore: Prepare for eMMC module
ARM: phytec-som-imx: imx6ul: Add eMMC support
ARM: dts: imx6ul: phycore: Add support for eMMC
ARM: dts: imx6ul: phycore: Add phyCORE-i.MX 6ULL with eMMC
ARM: dts: am335x-phytec-state: Add backend-storage-type
Steffen Trumtrar (1):
scripts: socfgpa_import_preloader: simplify procedure
Uwe Kleine-König (4):
mvebuimg: new tool to create kwb version1 boot images
images/mvebu: Convert Armada machines to mvebuimg
images/mvebu: use space before = instead of tab
mtd: spi-nor: Add support for ISSI flashes from Linux
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
reply other threads:[~2019-08-14 8:47 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190814084708.em7vxkvo5ijkprdy@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox