From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.92 #3 (Red Hat Linux)) id 1i15PN-0007Qq-07 for barebox@lists.infradead.org; Fri, 23 Aug 2019 08:58:58 +0000 Date: Fri, 23 Aug 2019 10:58:54 +0200 From: Sascha Hauer Message-ID: <20190823085854.bfskgoqbwf5kbfhn@pengutronix.de> References: <20190820221638.19492-1-cory.tusar@zii.aero> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20190820221638.19492-1-cory.tusar@zii.aero> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH] Documentation: zii-vf610-dev: Fix 'halt' in openocd configuration script To: Cory Tusar Cc: "barebox@lists.infradead.org" , Chris Healy On Tue, Aug 20, 2019 at 10:17:36PM +0000, Cory Tusar wrote: > When attempting to use the existing configuration file to bootstrap > an SCU4 AIB board, openocd would consistently fail on the 'halt' command > with a "Target not examined yet" error. Dumping target information > showed that vf610.cpu1 was the active target, rather that vf610.cpu0. > > Adding a command prior to the halt to explicitly set the target core > resulted in proper operation. > > Tested with openocd-0.10.0+dev-00924-g16496488 on a Zodiac SCU4 AIB. > > Signed-off-by: Cory Tusar > --- > Documentation/boards/imx/zii-vf610-dev/openocd.cfg | 1 + > 1 file changed, 1 insertion(+) Applied, thanks Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox