* [PATCH 01/16] ARM: start: Allow to pass machine type as boarddata
2019-09-18 7:54 [PATCH 00/16] ARM: mxs: full multi image support Sascha Hauer
@ 2019-09-18 7:54 ` Sascha Hauer
2019-09-18 7:54 ` [PATCH 02/16] ARM: tx28: Pass and check machine type Sascha Hauer
` (14 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: Sascha Hauer @ 2019-09-18 7:54 UTC (permalink / raw)
To: Barebox List
Allow to pass a machine type number as directly as boarddata. This makes
it easy for non device tree boards to pass a machine type and to
identify themselves during runtime.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/cpu/start.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/arm/cpu/start.c b/arch/arm/cpu/start.c
index c97b2770c4..0c2e9fb9a8 100644
--- a/arch/arm/cpu/start.c
+++ b/arch/arm/cpu/start.c
@@ -193,7 +193,19 @@ __noreturn void barebox_non_pbl_start(unsigned long membase,
uint32_t totalsize = 0;
const char *name;
- if (blob_is_fdt(boarddata)) {
+ if ((unsigned long)boarddata < 8192) {
+ struct barebox_arm_boarddata *bd;
+ uint32_t machine_type = (uint32_t)boarddata;
+ unsigned long mem = arm_mem_boarddata(membase, endmem,
+ sizeof(*bd));
+ pr_debug("found machine type %d in boarddata\n",
+ machine_type);
+ bd = barebox_boarddata = (void *)mem;
+ barebox_boarddata_size = sizeof(*bd);
+ bd->magic = BAREBOX_ARM_BOARDDATA_MAGIC;
+ bd->machine = machine_type;
+ malloc_end = mem;
+ } else if (blob_is_fdt(boarddata)) {
totalsize = get_unaligned_be32(boarddata + 4);
name = "DTB";
} else if (blob_is_compressed_fdt(boarddata)) {
--
2.23.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 02/16] ARM: tx28: Pass and check machine type
2019-09-18 7:54 [PATCH 00/16] ARM: mxs: full multi image support Sascha Hauer
2019-09-18 7:54 ` [PATCH 01/16] ARM: start: Allow to pass machine type as boarddata Sascha Hauer
@ 2019-09-18 7:54 ` Sascha Hauer
2019-09-18 7:54 ` [PATCH 03/16] ARM: tx28: Make locally used function static Sascha Hauer
` (13 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: Sascha Hauer @ 2019-09-18 7:54 UTC (permalink / raw)
To: Barebox List
Pass MACH_TYPE_TX28 to barebox_arm_entry() and check for it in initcalls
to make the board multi image safe.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/karo-tx28/lowlevel.c | 3 ++-
arch/arm/boards/karo-tx28/tx28-stk5.c | 5 +++++
arch/arm/boards/karo-tx28/tx28.c | 4 ++++
3 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boards/karo-tx28/lowlevel.c b/arch/arm/boards/karo-tx28/lowlevel.c
index 1a93be747d..84cc681816 100644
--- a/arch/arm/boards/karo-tx28/lowlevel.c
+++ b/arch/arm/boards/karo-tx28/lowlevel.c
@@ -11,10 +11,11 @@
#include <debug_ll.h>
#include <mach/iomux.h>
#include <stmp-device.h>
+#include <generated/mach-types.h>
ENTRY_FUNCTION(start_barebox_karo_tx28, r0, r1, r2)
{
- barebox_arm_entry(IMX_MEMORY_BASE, SZ_128M, NULL);
+ barebox_arm_entry(IMX_MEMORY_BASE, SZ_128M, (void *)MACH_TYPE_TX28);
}
static const uint32_t iomux_pads[] = {
diff --git a/arch/arm/boards/karo-tx28/tx28-stk5.c b/arch/arm/boards/karo-tx28/tx28-stk5.c
index ec0826297b..b5f7dd586f 100644
--- a/arch/arm/boards/karo-tx28/tx28-stk5.c
+++ b/arch/arm/boards/karo-tx28/tx28-stk5.c
@@ -23,6 +23,7 @@
#include <io.h>
#include <net.h>
#include <asm/sections.h>
+#include <asm/barebox-arm.h>
#include <linux/err.h>
#include <mach/imx-regs.h>
#include <mach/clock.h>
@@ -30,6 +31,7 @@
#include <mach/fb.h>
#include <mach/ocotp.h>
#include <mach/iomux.h>
+#include <generated/mach-types.h>
static struct mxs_mci_platform_data mci_pdata = {
.caps = MMC_CAP_4_BIT_DATA,
@@ -395,6 +397,9 @@ void base_board_init(void)
static int tx28kit_console_init(void)
{
+ if (barebox_arm_machine() != MACH_TYPE_TX28)
+ return 0;
+
barebox_set_model("Ka-Ro TX28");
barebox_set_hostname("tx28");
diff --git a/arch/arm/boards/karo-tx28/tx28.c b/arch/arm/boards/karo-tx28/tx28.c
index 47cac21307..d99083b190 100644
--- a/arch/arm/boards/karo-tx28/tx28.c
+++ b/arch/arm/boards/karo-tx28/tx28.c
@@ -18,6 +18,7 @@
#include <environment.h>
#include <errno.h>
#include <asm/armlinux.h>
+#include <asm/barebox-arm.h>
#include <io.h>
#include <generated/mach-types.h>
#include <mach/imx-regs.h>
@@ -77,6 +78,9 @@ static int tx28_devices_init(void)
{
int i;
+ if (barebox_arm_machine() != MACH_TYPE_TX28)
+ return 0;
+
/* initizalize gpios */
for (i = 0; i < ARRAY_SIZE(tx28_pad_setup); i++)
imx_gpio_mode(tx28_pad_setup[i]);
--
2.23.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 03/16] ARM: tx28: Make locally used function static
2019-09-18 7:54 [PATCH 00/16] ARM: mxs: full multi image support Sascha Hauer
2019-09-18 7:54 ` [PATCH 01/16] ARM: start: Allow to pass machine type as boarddata Sascha Hauer
2019-09-18 7:54 ` [PATCH 02/16] ARM: tx28: Pass and check machine type Sascha Hauer
@ 2019-09-18 7:54 ` Sascha Hauer
2019-09-18 7:54 ` [PATCH 04/16] ARM: duckbill: Check machine type in initcalls Sascha Hauer
` (12 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: Sascha Hauer @ 2019-09-18 7:54 UTC (permalink / raw)
To: Barebox List
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/karo-tx28/tx28-stk5.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boards/karo-tx28/tx28-stk5.c b/arch/arm/boards/karo-tx28/tx28-stk5.c
index b5f7dd586f..8628db2b25 100644
--- a/arch/arm/boards/karo-tx28/tx28-stk5.c
+++ b/arch/arm/boards/karo-tx28/tx28-stk5.c
@@ -349,7 +349,7 @@ static int register_persistent_environment(void)
return 0;
}
-void tx28_get_ethaddr(void)
+static void tx28_get_ethaddr(void)
{
u32 buf[2]; /* to make use of cpu_to_be32 */
u32 ethaddr[2];
--
2.23.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 04/16] ARM: duckbill: Check machine type in initcalls
2019-09-18 7:54 [PATCH 00/16] ARM: mxs: full multi image support Sascha Hauer
` (2 preceding siblings ...)
2019-09-18 7:54 ` [PATCH 03/16] ARM: tx28: Make locally used function static Sascha Hauer
@ 2019-09-18 7:54 ` Sascha Hauer
2019-09-18 7:54 ` [PATCH 05/16] ARM: Freescale mx28evk: " Sascha Hauer
` (11 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: Sascha Hauer @ 2019-09-18 7:54 UTC (permalink / raw)
To: Barebox List
Check for the right machine type in initcalls before executing them to
make the board multi image safe.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/duckbill/board.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boards/duckbill/board.c b/arch/arm/boards/duckbill/board.c
index 3c6ab8e596..13d4ae43cf 100644
--- a/arch/arm/boards/duckbill/board.c
+++ b/arch/arm/boards/duckbill/board.c
@@ -62,6 +62,9 @@ static struct fsl_usb2_platform_data usb_pdata = {
static int duckbill_devices_init(void)
{
+ if (!of_machine_is_compatible("i2se,duckbill"))
+ return 0;
+
duckbill_get_ethaddr(); /* must be after registering ocotp */
imx28_usb_phy0_enable();
@@ -74,6 +77,9 @@ fs_initcall(duckbill_devices_init);
static int duckbill_console_init(void)
{
+ if (!of_machine_is_compatible("i2se,duckbill"))
+ return 0;
+
barebox_set_model("I2SE Duckbill");
barebox_set_hostname("duckbill");
--
2.23.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 05/16] ARM: Freescale mx28evk: Check machine type in initcalls
2019-09-18 7:54 [PATCH 00/16] ARM: mxs: full multi image support Sascha Hauer
` (3 preceding siblings ...)
2019-09-18 7:54 ` [PATCH 04/16] ARM: duckbill: Check machine type in initcalls Sascha Hauer
@ 2019-09-18 7:54 ` Sascha Hauer
2019-09-18 7:54 ` [PATCH 06/16] ARM: i.MX23 olinuxino: " Sascha Hauer
` (10 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: Sascha Hauer @ 2019-09-18 7:54 UTC (permalink / raw)
To: Barebox List
Check for the right machine type in initcalls before executing them to
make the board multi image safe.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/freescale-mx28-evk/board.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boards/freescale-mx28-evk/board.c b/arch/arm/boards/freescale-mx28-evk/board.c
index 4590ceaa35..92097a2bca 100644
--- a/arch/arm/boards/freescale-mx28-evk/board.c
+++ b/arch/arm/boards/freescale-mx28-evk/board.c
@@ -34,6 +34,9 @@ static void mx28_evk_get_ethaddr(void)
static int mx28_evk_devices_init(void)
{
+ if (!of_machine_is_compatible("fsl,imx28-evk"))
+ return 0;
+
mx28_evk_get_ethaddr(); /* must be after registering ocotp */
return 0;
--
2.23.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 06/16] ARM: i.MX23 olinuxino: Check machine type in initcalls
2019-09-18 7:54 [PATCH 00/16] ARM: mxs: full multi image support Sascha Hauer
` (4 preceding siblings ...)
2019-09-18 7:54 ` [PATCH 05/16] ARM: Freescale mx28evk: " Sascha Hauer
@ 2019-09-18 7:54 ` Sascha Hauer
2019-09-18 7:54 ` [PATCH 07/16] ARM: Crytalfonts cfa10036: " Sascha Hauer
` (9 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: Sascha Hauer @ 2019-09-18 7:54 UTC (permalink / raw)
To: Barebox List
Check for the right machine type in initcalls before executing them to
make the board multi image safe.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/imx233-olinuxino/imx23-olinuxino.c | 8 ++++++++
arch/arm/boards/imx233-olinuxino/lowlevel.c | 3 ++-
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boards/imx233-olinuxino/imx23-olinuxino.c b/arch/arm/boards/imx233-olinuxino/imx23-olinuxino.c
index c06779ddf6..af548b3c53 100644
--- a/arch/arm/boards/imx233-olinuxino/imx23-olinuxino.c
+++ b/arch/arm/boards/imx233-olinuxino/imx23-olinuxino.c
@@ -26,6 +26,7 @@
#include <errno.h>
#include <mci.h>
#include <asm/armlinux.h>
+#include <asm/barebox-arm.h>
#include <usb/ehci.h>
#include <mach/usb.h>
#include <generated/mach-types.h>
@@ -33,6 +34,7 @@
#include <mach/clock.h>
#include <mach/mci.h>
#include <mach/iomux.h>
+#include <generated/mach-types.h>
static struct mxs_mci_platform_data mci_pdata = {
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED,
@@ -56,6 +58,9 @@ static struct gpio_led led1 = {
static int imx23_olinuxino_devices_init(void)
{
+ if (barebox_arm_machine() != MACH_TYPE_IMX233_OLINUXINO)
+ return 0;
+
armlinux_set_architecture(MACH_TYPE_IMX233_OLINUXINO);
defaultenv_append_directory(defaultenv_imx233_olinuxino);
@@ -76,6 +81,9 @@ device_initcall(imx23_olinuxino_devices_init);
static int imx23_olinuxino_console_init(void)
{
+ if (barebox_arm_machine() != MACH_TYPE_IMX233_OLINUXINO)
+ return 0;
+
barebox_set_model("Olimex.ltd imx233-olinuxino");
barebox_set_hostname("imx233-olinuxino");
diff --git a/arch/arm/boards/imx233-olinuxino/lowlevel.c b/arch/arm/boards/imx233-olinuxino/lowlevel.c
index 07a2a0e293..253cf1257b 100644
--- a/arch/arm/boards/imx233-olinuxino/lowlevel.c
+++ b/arch/arm/boards/imx233-olinuxino/lowlevel.c
@@ -7,10 +7,11 @@
#include <io.h>
#include <debug_ll.h>
#include <mach/iomux.h>
+#include <generated/mach-types.h>
ENTRY_FUNCTION(start_barebox_olinuxino_imx23, r0, r1, r2)
{
- barebox_arm_entry(IMX_MEMORY_BASE, SZ_64M, NULL);
+ barebox_arm_entry(IMX_MEMORY_BASE, SZ_64M, (void *)MACH_TYPE_IMX233_OLINUXINO);
}
static const uint32_t pad_setup[] = {
--
2.23.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 07/16] ARM: Crytalfonts cfa10036: Check machine type in initcalls
2019-09-18 7:54 [PATCH 00/16] ARM: mxs: full multi image support Sascha Hauer
` (5 preceding siblings ...)
2019-09-18 7:54 ` [PATCH 06/16] ARM: i.MX23 olinuxino: " Sascha Hauer
@ 2019-09-18 7:54 ` Sascha Hauer
2019-09-18 7:54 ` [PATCH 08/16] ARM: i.MX23 Chumby: " Sascha Hauer
` (8 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: Sascha Hauer @ 2019-09-18 7:54 UTC (permalink / raw)
To: Barebox List
Check for the right machine type in initcalls before executing them to
make the board multi image safe.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/crystalfontz-cfa10036/cfa10036.c | 7 +++++++
arch/arm/boards/crystalfontz-cfa10036/lowlevel.c | 3 ++-
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boards/crystalfontz-cfa10036/cfa10036.c b/arch/arm/boards/crystalfontz-cfa10036/cfa10036.c
index dcf560432d..29b91e775f 100644
--- a/arch/arm/boards/crystalfontz-cfa10036/cfa10036.c
+++ b/arch/arm/boards/crystalfontz-cfa10036/cfa10036.c
@@ -37,6 +37,7 @@
#include <asm/armlinux.h>
#include <asm/mmu.h>
+#include <asm/barebox-arm.h>
#include <mach/fb.h>
@@ -93,6 +94,9 @@ static int cfa10036_devices_init(void)
{
int i;
+ if (barebox_arm_machine() != MACH_TYPE_CFA10036)
+ return 0;
+
/* initizalize muxing */
for (i = 0; i < ARRAY_SIZE(cfa10036_pads); i++)
imx_gpio_mode(cfa10036_pads[i]);
@@ -115,6 +119,9 @@ device_initcall(cfa10036_devices_init);
static int cfa10036_console_init(void)
{
+ if (barebox_arm_machine() != MACH_TYPE_CFA10036)
+ return 0;
+
barebox_set_model("crystalfontz-cfa10036");
barebox_set_hostname("cfa10036");
diff --git a/arch/arm/boards/crystalfontz-cfa10036/lowlevel.c b/arch/arm/boards/crystalfontz-cfa10036/lowlevel.c
index 50dbcdc150..37c162d30d 100644
--- a/arch/arm/boards/crystalfontz-cfa10036/lowlevel.c
+++ b/arch/arm/boards/crystalfontz-cfa10036/lowlevel.c
@@ -3,9 +3,10 @@
#include <asm/barebox-arm-head.h>
#include <asm/barebox-arm.h>
#include <mach/imx28-regs.h>
+#include <generated/mach-types.h>
void __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2d)
{
arm_cpu_lowlevel_init();
- barebox_arm_entry(IMX_MEMORY_BASE, SZ_128M, NULL);
+ barebox_arm_entry(IMX_MEMORY_BASE, SZ_128M, (void *)MACH_TYPE_CFA10036);
}
--
2.23.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 08/16] ARM: i.MX23 Chumby: Check machine type in initcalls
2019-09-18 7:54 [PATCH 00/16] ARM: mxs: full multi image support Sascha Hauer
` (6 preceding siblings ...)
2019-09-18 7:54 ` [PATCH 07/16] ARM: Crytalfonts cfa10036: " Sascha Hauer
@ 2019-09-18 7:54 ` Sascha Hauer
2019-09-18 7:54 ` [PATCH 09/16] ARM: Freescale i.MX23 evk: " Sascha Hauer
` (7 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: Sascha Hauer @ 2019-09-18 7:54 UTC (permalink / raw)
To: Barebox List
Check for the right machine type in initcalls before executing them to
make the board multi image safe.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/chumby_falconwing/falconwing.c | 7 +++++++
arch/arm/boards/chumby_falconwing/lowlevel.c | 3 ++-
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boards/chumby_falconwing/falconwing.c b/arch/arm/boards/chumby_falconwing/falconwing.c
index 5554b78d6d..f218058f88 100644
--- a/arch/arm/boards/chumby_falconwing/falconwing.c
+++ b/arch/arm/boards/chumby_falconwing/falconwing.c
@@ -22,6 +22,7 @@
#include <linux/sizes.h>
#include <usb/ehci.h>
#include <asm/armlinux.h>
+#include <asm/barebox-arm.h>
#include <io.h>
#include <asm/mmu.h>
#include <generated/mach-types.h>
@@ -278,6 +279,9 @@ static int falconwing_devices_init(void)
{
int i;
+ if (barebox_arm_machine() != MACH_TYPE_CHUMBY)
+ return 0;
+
/* initizalize gpios */
for (i = 0; i < ARRAY_SIZE(pad_setup); i++)
imx_gpio_mode(pad_setup[i]);
@@ -300,6 +304,9 @@ device_initcall(falconwing_devices_init);
static int falconwing_console_init(void)
{
+ if (barebox_arm_machine() != MACH_TYPE_CHUMBY)
+ return 0;
+
barebox_set_model("Chumby Falconwing");
barebox_set_hostname("falconwing");
diff --git a/arch/arm/boards/chumby_falconwing/lowlevel.c b/arch/arm/boards/chumby_falconwing/lowlevel.c
index 50bacc620f..ee287eccdf 100644
--- a/arch/arm/boards/chumby_falconwing/lowlevel.c
+++ b/arch/arm/boards/chumby_falconwing/lowlevel.c
@@ -3,9 +3,10 @@
#include <asm/barebox-arm-head.h>
#include <asm/barebox-arm.h>
#include <mach/imx23-regs.h>
+#include <generated/mach-types.h>
void __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
{
arm_cpu_lowlevel_init();
- barebox_arm_entry(IMX_MEMORY_BASE, SZ_64M, NULL);
+ barebox_arm_entry(IMX_MEMORY_BASE, SZ_64M, (void *)MACH_TYPE_CHUMBY);
}
--
2.23.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 09/16] ARM: Freescale i.MX23 evk: Check machine type in initcalls
2019-09-18 7:54 [PATCH 00/16] ARM: mxs: full multi image support Sascha Hauer
` (7 preceding siblings ...)
2019-09-18 7:54 ` [PATCH 08/16] ARM: i.MX23 Chumby: " Sascha Hauer
@ 2019-09-18 7:54 ` Sascha Hauer
2019-09-18 7:54 ` [PATCH 10/16] ARM: mxs: cfa10036: Switch to multi image support Sascha Hauer
` (6 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: Sascha Hauer @ 2019-09-18 7:54 UTC (permalink / raw)
To: Barebox List
Check for the right machine type in initcalls before executing them to
make the board multi image safe.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/freescale-mx23-evk/lowlevel.c | 3 ++-
arch/arm/boards/freescale-mx23-evk/mx23-evk.c | 7 +++++++
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boards/freescale-mx23-evk/lowlevel.c b/arch/arm/boards/freescale-mx23-evk/lowlevel.c
index 13c7435cd6..2321a469ab 100644
--- a/arch/arm/boards/freescale-mx23-evk/lowlevel.c
+++ b/arch/arm/boards/freescale-mx23-evk/lowlevel.c
@@ -1,5 +1,6 @@
#include <common.h>
#include <linux/sizes.h>
+#include <generated/mach-types.h>
#include <asm/barebox-arm-head.h>
#include <asm/barebox-arm.h>
#include <mach/imx23-regs.h>
@@ -7,5 +8,5 @@
void __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
{
arm_cpu_lowlevel_init();
- barebox_arm_entry(IMX_MEMORY_BASE, SZ_32M, NULL);
+ barebox_arm_entry(IMX_MEMORY_BASE, SZ_32M, (void *)MACH_TYPE_MX23EVK);
}
diff --git a/arch/arm/boards/freescale-mx23-evk/mx23-evk.c b/arch/arm/boards/freescale-mx23-evk/mx23-evk.c
index a3587db063..75a7d5a6b4 100644
--- a/arch/arm/boards/freescale-mx23-evk/mx23-evk.c
+++ b/arch/arm/boards/freescale-mx23-evk/mx23-evk.c
@@ -22,6 +22,7 @@
#include <linux/err.h>
#include <asm/armlinux.h>
#include <generated/mach-types.h>
+#include <asm/barebox-arm.h>
#include <mach/imx-regs.h>
#include <mach/clock.h>
#include <mach/mci.h>
@@ -99,6 +100,9 @@ static int mx23_evk_devices_init(void)
{
int i, rc;
+ if (barebox_arm_machine() != MACH_TYPE_MX23EVK)
+ return 0;
+
/* initizalize gpios */
for (i = 0; i < ARRAY_SIZE(pad_setup); i++)
imx_gpio_mode(pad_setup[i]);
@@ -126,6 +130,9 @@ device_initcall(mx23_evk_devices_init);
static int mx23_evk_console_init(void)
{
+ if (barebox_arm_machine() != MACH_TYPE_MX23EVK)
+ return 0;
+
barebox_set_model("Freescale i.MX23 EVK");
barebox_set_hostname("mx23evk");
--
2.23.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 10/16] ARM: mxs: cfa10036: Switch to multi image support
2019-09-18 7:54 [PATCH 00/16] ARM: mxs: full multi image support Sascha Hauer
` (8 preceding siblings ...)
2019-09-18 7:54 ` [PATCH 09/16] ARM: Freescale i.MX23 evk: " Sascha Hauer
@ 2019-09-18 7:54 ` Sascha Hauer
2019-09-18 7:54 ` [PATCH 11/16] ARM: mxs: imx23-evk: " Sascha Hauer
` (5 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: Sascha Hauer @ 2019-09-18 7:54 UTC (permalink / raw)
To: Barebox List
Build the cfa10036 as multi image.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/crystalfontz-cfa10036/lowlevel.c | 2 +-
arch/arm/mach-mxs/Kconfig | 1 +
images/Makefile.mxs | 4 ++++
3 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boards/crystalfontz-cfa10036/lowlevel.c b/arch/arm/boards/crystalfontz-cfa10036/lowlevel.c
index 37c162d30d..1bc5947682 100644
--- a/arch/arm/boards/crystalfontz-cfa10036/lowlevel.c
+++ b/arch/arm/boards/crystalfontz-cfa10036/lowlevel.c
@@ -5,7 +5,7 @@
#include <mach/imx28-regs.h>
#include <generated/mach-types.h>
-void __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2d)
+ENTRY_FUNCTION(start_cfa10036, r0, r1, r2)
{
arm_cpu_lowlevel_init();
barebox_arm_entry(IMX_MEMORY_BASE, SZ_128M, (void *)MACH_TYPE_CFA10036);
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index fed7b524de..2409c53dd7 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -83,6 +83,7 @@ config MACH_CFA10036
select MXS_OCOTP
select I2C_GPIO
select EEPROM_AT24
+ select HAVE_PBL_MULTI_IMAGES
help
Say Y here if you are using the Crystalfontz CFA-10036 module
diff --git a/images/Makefile.mxs b/images/Makefile.mxs
index f93c3fddd0..b230c02562 100644
--- a/images/Makefile.mxs
+++ b/images/Makefile.mxs
@@ -64,3 +64,7 @@ FILE_barebox-olinuxino-imx23-sd.img = start_barebox_olinuxino_imx23.mxsbs.mxssd
image-$(CONFIG_MACH_IMX233_OLINUXINO) += barebox-olinuxino-imx23-sd.img
FILE_barebox-olinuxino-imx23-2nd.img = start_barebox_olinuxino_imx23.pblb
image-$(CONFIG_MACH_IMX233_OLINUXINO) += barebox-olinuxino-imx23-2nd.img
+
+pblb-$(CONFIG_MACH_CFA10036) += start_cfa10036
+FILE_barebox-crystalfonts-cfa10036-2nd.img = start_cfa10036.pblb
+image-$(CONFIG_MACH_CFA10036) += barebox-crystalfonts-cfa10036-2nd.img
--
2.23.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 11/16] ARM: mxs: imx23-evk: Switch to multi image support
2019-09-18 7:54 [PATCH 00/16] ARM: mxs: full multi image support Sascha Hauer
` (9 preceding siblings ...)
2019-09-18 7:54 ` [PATCH 10/16] ARM: mxs: cfa10036: Switch to multi image support Sascha Hauer
@ 2019-09-18 7:54 ` Sascha Hauer
2019-09-18 7:54 ` [PATCH 12/16] ARM: mxs: chumby: " Sascha Hauer
` (4 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: Sascha Hauer @ 2019-09-18 7:54 UTC (permalink / raw)
To: Barebox List
Build the i.MX23 EVK as multi image.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/freescale-mx23-evk/lowlevel.c | 2 +-
arch/arm/mach-mxs/Kconfig | 1 +
images/Makefile.mxs | 4 ++++
3 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boards/freescale-mx23-evk/lowlevel.c b/arch/arm/boards/freescale-mx23-evk/lowlevel.c
index 2321a469ab..99e08d88c7 100644
--- a/arch/arm/boards/freescale-mx23-evk/lowlevel.c
+++ b/arch/arm/boards/freescale-mx23-evk/lowlevel.c
@@ -5,7 +5,7 @@
#include <asm/barebox-arm.h>
#include <mach/imx23-regs.h>
-void __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
+ENTRY_FUNCTION(start_imx23_evk, r0, r1, r2)
{
arm_cpu_lowlevel_init();
barebox_arm_entry(IMX_MEMORY_BASE, SZ_32M, (void *)MACH_TYPE_MX23EVK);
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 2409c53dd7..fd6b5929a3 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -34,6 +34,7 @@ choice
config MACH_MX23EVK
bool "mx23-evk"
+ select HAVE_PBL_MULTI_IMAGES
help
Say Y here if you are using the Freescale i.MX23-EVK board
diff --git a/images/Makefile.mxs b/images/Makefile.mxs
index b230c02562..4c69c347fb 100644
--- a/images/Makefile.mxs
+++ b/images/Makefile.mxs
@@ -68,3 +68,7 @@ image-$(CONFIG_MACH_IMX233_OLINUXINO) += barebox-olinuxino-imx23-2nd.img
pblb-$(CONFIG_MACH_CFA10036) += start_cfa10036
FILE_barebox-crystalfonts-cfa10036-2nd.img = start_cfa10036.pblb
image-$(CONFIG_MACH_CFA10036) += barebox-crystalfonts-cfa10036-2nd.img
+
+pblb-$(CONFIG_MACH_MX23EVK) += start_imx23_evk
+FILE_barebox-freescale-mx23-evk-2nd.img = start_imx23_evk.pblb
+image-$(CONFIG_MACH_MX23EVK) += barebox-freescale-mx23-evk-2nd.img
--
2.23.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 12/16] ARM: mxs: chumby: Switch to multi image support
2019-09-18 7:54 [PATCH 00/16] ARM: mxs: full multi image support Sascha Hauer
` (10 preceding siblings ...)
2019-09-18 7:54 ` [PATCH 11/16] ARM: mxs: imx23-evk: " Sascha Hauer
@ 2019-09-18 7:54 ` Sascha Hauer
2019-09-18 7:54 ` [PATCH 13/16] ARM: mxs: Move HAVE_PBL_MULTI_IMAGES up to ARCH Sascha Hauer
` (3 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: Sascha Hauer @ 2019-09-18 7:54 UTC (permalink / raw)
To: Barebox List
Build the Chumby as multi image.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/chumby_falconwing/lowlevel.c | 2 +-
arch/arm/mach-mxs/Kconfig | 1 +
images/Makefile.mxs | 4 ++++
3 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boards/chumby_falconwing/lowlevel.c b/arch/arm/boards/chumby_falconwing/lowlevel.c
index ee287eccdf..0277b5d083 100644
--- a/arch/arm/boards/chumby_falconwing/lowlevel.c
+++ b/arch/arm/boards/chumby_falconwing/lowlevel.c
@@ -5,7 +5,7 @@
#include <mach/imx23-regs.h>
#include <generated/mach-types.h>
-void __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
+ENTRY_FUNCTION(start_chumby_falconwing, r0, r1, r2)
{
arm_cpu_lowlevel_init();
barebox_arm_entry(IMX_MEMORY_BASE, SZ_64M, (void *)MACH_TYPE_CHUMBY);
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index fd6b5929a3..ffaf9a9e61 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -40,6 +40,7 @@ config MACH_MX23EVK
config MACH_CHUMBY
bool "Chumby Falconwing"
+ select HAVE_PBL_MULTI_IMAGES
help
Say Y here if you are using the "chumby one" aka falconwing from
Chumby Industries
diff --git a/images/Makefile.mxs b/images/Makefile.mxs
index 4c69c347fb..ceb7b376a5 100644
--- a/images/Makefile.mxs
+++ b/images/Makefile.mxs
@@ -72,3 +72,7 @@ image-$(CONFIG_MACH_CFA10036) += barebox-crystalfonts-cfa10036-2nd.img
pblb-$(CONFIG_MACH_MX23EVK) += start_imx23_evk
FILE_barebox-freescale-mx23-evk-2nd.img = start_imx23_evk.pblb
image-$(CONFIG_MACH_MX23EVK) += barebox-freescale-mx23-evk-2nd.img
+
+pblb-$(CONFIG_MACH_CHUMBY) += start_chumby_falconwing
+FILE_barebox-chumby-falconwing-2nd.img = start_chumby_falconwing.pblb
+image-$(CONFIG_MACH_CHUMBY) += barebox-chumby-falconwing-2nd.img
--
2.23.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 13/16] ARM: mxs: Move HAVE_PBL_MULTI_IMAGES up to ARCH
2019-09-18 7:54 [PATCH 00/16] ARM: mxs: full multi image support Sascha Hauer
` (11 preceding siblings ...)
2019-09-18 7:54 ` [PATCH 12/16] ARM: mxs: chumby: " Sascha Hauer
@ 2019-09-18 7:54 ` Sascha Hauer
2019-09-18 7:54 ` [PATCH 14/16] ARM: mxs: Allow to compile all boards for a SoC together Sascha Hauer
` (2 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: Sascha Hauer @ 2019-09-18 7:54 UTC (permalink / raw)
To: Barebox List
Now that all boards in mach-mxs select HAVE_PBL_MULTI_IMAGES we can move
it up to ARCH_MXS.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-mxs/Kconfig | 7 -------
2 files changed, 1 insertion(+), 7 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b227bb78b6..e045f0ea64 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -144,6 +144,7 @@ config ARCH_MXS
select COMMON_CLK
select CLKDEV_LOOKUP
select HAS_DEBUG_LL
+ select HAVE_PBL_MULTI_IMAGES
config ARCH_NETX
bool "Hilscher NetX based"
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index ffaf9a9e61..ea877d24a3 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -34,20 +34,17 @@ choice
config MACH_MX23EVK
bool "mx23-evk"
- select HAVE_PBL_MULTI_IMAGES
help
Say Y here if you are using the Freescale i.MX23-EVK board
config MACH_CHUMBY
bool "Chumby Falconwing"
- select HAVE_PBL_MULTI_IMAGES
help
Say Y here if you are using the "chumby one" aka falconwing from
Chumby Industries
config MACH_IMX233_OLINUXINO
bool "Olimex.ltd imx223-olinuxino"
- select HAVE_PBL_MULTI_IMAGES
help
Say Y here if you are using the imx233-olinuxino
@@ -62,21 +59,18 @@ choice
config MACH_TX28
bool "KARO tx28"
- select HAVE_PBL_MULTI_IMAGES
help
Say Y here if you are using the KARO TX28 CPU module.
config MACH_MX28EVK
bool "mx28-evk"
select MXS_OCOTP
- select HAVE_PBL_MULTI_IMAGES
help
Say Y here if you are using the Freescale i.MX28-EVK board
config MACH_DUCKBILL
bool "Duckbill"
select MXS_OCOTP
- select HAVE_PBL_MULTI_IMAGES
help
Say Y here if you are using the I2SE Duckbill board
@@ -85,7 +79,6 @@ config MACH_CFA10036
select MXS_OCOTP
select I2C_GPIO
select EEPROM_AT24
- select HAVE_PBL_MULTI_IMAGES
help
Say Y here if you are using the Crystalfontz CFA-10036 module
--
2.23.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 14/16] ARM: mxs: Allow to compile all boards for a SoC together
2019-09-18 7:54 [PATCH 00/16] ARM: mxs: full multi image support Sascha Hauer
` (12 preceding siblings ...)
2019-09-18 7:54 ` [PATCH 13/16] ARM: mxs: Move HAVE_PBL_MULTI_IMAGES up to ARCH Sascha Hauer
@ 2019-09-18 7:54 ` Sascha Hauer
2019-09-18 7:54 ` [PATCH 15/16] ARM: add common i.MX28 defconfig file Sascha Hauer
2019-09-18 7:54 ` [PATCH 16/16] ARM: add common i.MX23 " Sascha Hauer
15 siblings, 0 replies; 17+ messages in thread
From: Sascha Hauer @ 2019-09-18 7:54 UTC (permalink / raw)
To: Barebox List
All boards in mach-mxs support multi image, so we no longer have to make
the board type a choice. Let the user compile all boards for a SoC
together. We cannot compile i.MX23 together with i.MX28 though, there
are still many conflicting defines which use the IMX_ namespace which
are really SoC specific.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-mxs/Kconfig | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index ea877d24a3..b3a7c6259c 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -29,9 +29,6 @@ endchoice
if ARCH_IMX23
-choice
- prompt "i.MX23 Board Type"
-
config MACH_MX23EVK
bool "mx23-evk"
help
@@ -48,15 +45,10 @@ config MACH_IMX233_OLINUXINO
help
Say Y here if you are using the imx233-olinuxino
-endchoice
-
endif
if ARCH_IMX28
-choice
- prompt "i.MX28 Board Type"
-
config MACH_TX28
bool "KARO tx28"
help
@@ -82,8 +74,6 @@ config MACH_CFA10036
help
Say Y here if you are using the Crystalfontz CFA-10036 module
-endchoice
-
endif
menu "i.MX specific settings"
--
2.23.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 15/16] ARM: add common i.MX28 defconfig file
2019-09-18 7:54 [PATCH 00/16] ARM: mxs: full multi image support Sascha Hauer
` (13 preceding siblings ...)
2019-09-18 7:54 ` [PATCH 14/16] ARM: mxs: Allow to compile all boards for a SoC together Sascha Hauer
@ 2019-09-18 7:54 ` Sascha Hauer
2019-09-18 7:54 ` [PATCH 16/16] ARM: add common i.MX23 " Sascha Hauer
15 siblings, 0 replies; 17+ messages in thread
From: Sascha Hauer @ 2019-09-18 7:54 UTC (permalink / raw)
To: Barebox List
Merge the defconfigs for the i.MX28 boards into a common
imx28_defconfig.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/configs/cfa10036_defconfig | 38 --------
arch/arm/configs/freescale-mx28-evk_defconfig | 89 ------------------
.../{duckbill_defconfig => imx28_defconfig} | 20 ++++
arch/arm/configs/tx28stk5_defconfig | 94 -------------------
4 files changed, 20 insertions(+), 221 deletions(-)
delete mode 100644 arch/arm/configs/cfa10036_defconfig
delete mode 100644 arch/arm/configs/freescale-mx28-evk_defconfig
rename arch/arm/configs/{duckbill_defconfig => imx28_defconfig} (82%)
delete mode 100644 arch/arm/configs/tx28stk5_defconfig
diff --git a/arch/arm/configs/cfa10036_defconfig b/arch/arm/configs/cfa10036_defconfig
deleted file mode 100644
index 5a4e2ab45d..0000000000
--- a/arch/arm/configs/cfa10036_defconfig
+++ /dev/null
@@ -1,38 +0,0 @@
-CONFIG_TEXT_BASE=0x43000000
-CONFIG_ARCH_MXS=y
-CONFIG_ARCH_IMX28=y
-CONFIG_MACH_CFA10036=y
-CONFIG_AEABI=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_MMU=y
-CONFIG_MALLOC_SIZE=0x800000
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_BOOTM_OFTREE=y
-CONFIG_CONSOLE_ACTIVATE_ALL=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/crystalfontz-cfa10036/env"
-CONFIG_LONGHELP=y
-CONFIG_CMD_GO=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_OFTREE=y
-# CONFIG_SPI is not set
-CONFIG_I2C=y
-CONFIG_MCI=y
-CONFIG_MCI_STARTUP=y
-CONFIG_MCI_MXS=y
-CONFIG_FS_EXT4=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FAT_LFN=y
diff --git a/arch/arm/configs/freescale-mx28-evk_defconfig b/arch/arm/configs/freescale-mx28-evk_defconfig
deleted file mode 100644
index 29db99cee6..0000000000
--- a/arch/arm/configs/freescale-mx28-evk_defconfig
+++ /dev/null
@@ -1,89 +0,0 @@
-CONFIG_ARCH_MXS=y
-CONFIG_ARCH_IMX28=y
-CONFIG_MACH_MX28EVK=y
-CONFIG_AEABI=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_ARM_UNWIND=y
-CONFIG_MMU=y
-CONFIG_MALLOC_SIZE=0x0
-CONFIG_MALLOC_TLSF=y
-CONFIG_KALLSYMS=y
-CONFIG_RELOCATABLE=y
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_MENU=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_BOOTM_VERBOSE=y
-CONFIG_BOOTM_INITRD=y
-CONFIG_BLSPEC=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_RESET_SOURCE=y
-CONFIG_CMD_DMESG=y
-CONFIG_LONGHELP=y
-CONFIG_CMD_IOMEM=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_GO=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_UIMAGE=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_LOADENV=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_CMP=y
-CONFIG_CMD_FILETYPE=y
-CONFIG_CMD_LN=y
-CONFIG_CMD_MD5SUM=y
-CONFIG_CMD_UNCOMPRESS=y
-CONFIG_CMD_LET=y
-CONFIG_CMD_MSLEEP=y
-CONFIG_CMD_READF=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MIITOOL=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_MENUTREE=y
-CONFIG_CMD_SPLASH=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_CRC=y
-CONFIG_CMD_CRC_CMP=y
-CONFIG_CMD_MM=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DETECT=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_NANDTEST=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_OF_NODE=y
-CONFIG_CMD_OF_PROPERTY=y
-CONFIG_CMD_OFTREE=y
-CONFIG_NET=y
-CONFIG_OFDEVICE=y
-CONFIG_OF_BAREBOX_DRIVERS=y
-CONFIG_DRIVER_SERIAL_AUART=y
-CONFIG_DRIVER_NET_FEC_IMX=y
-CONFIG_DRIVER_SPI_MXS=y
-CONFIG_MTD=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_SST25L=y
-CONFIG_NAND=y
-CONFIG_NAND_MXS=y
-CONFIG_VIDEO=y
-CONFIG_DRIVER_VIDEO_STM=y
-CONFIG_MCI=y
-CONFIG_MCI_STARTUP=y
-CONFIG_MCI_MXS=y
-CONFIG_MXS_APBH_DMA=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED=y
-CONFIG_FS_TFTP=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FAT_WRITE=y
-CONFIG_FS_FAT_LFN=y
diff --git a/arch/arm/configs/duckbill_defconfig b/arch/arm/configs/imx28_defconfig
similarity index 82%
rename from arch/arm/configs/duckbill_defconfig
rename to arch/arm/configs/imx28_defconfig
index c0a3c1753b..58cda937a8 100644
--- a/arch/arm/configs/duckbill_defconfig
+++ b/arch/arm/configs/imx28_defconfig
@@ -1,6 +1,9 @@
CONFIG_ARCH_MXS=y
CONFIG_ARCH_IMX28=y
+CONFIG_MACH_TX28=y
+CONFIG_MACH_MX28EVK=y
CONFIG_MACH_DUCKBILL=y
+CONFIG_MACH_CFA10036=y
CONFIG_AEABI=y
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
CONFIG_ARM_UNWIND=y
@@ -17,12 +20,15 @@ CONFIG_BOOTM_SHOW_TYPE=y
CONFIG_BOOTM_VERBOSE=y
CONFIG_BOOTM_INITRD=y
CONFIG_BLSPEC=y
+CONFIG_CONSOLE_ALLOW_COLOR=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
CONFIG_RESET_SOURCE=y
CONFIG_CMD_DMESG=y
CONFIG_LONGHELP=y
CONFIG_CMD_IOMEM=y
+CONFIG_CMD_IMD=y
CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_BOOTU is not set
CONFIG_CMD_GO=y
CONFIG_CMD_RESET=y
CONFIG_CMD_UIMAGE=y
@@ -37,6 +43,8 @@ CONFIG_CMD_CMP=y
CONFIG_CMD_FILETYPE=y
CONFIG_CMD_LN=y
CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_CMD_SHA256SUM=y
CONFIG_CMD_UNCOMPRESS=y
CONFIG_CMD_LET=y
CONFIG_CMD_MSLEEP=y
@@ -64,18 +72,23 @@ CONFIG_CMD_NANDTEST=y
CONFIG_CMD_SPI=y
CONFIG_CMD_LED_TRIGGER=y
CONFIG_CMD_USBGADGET=y
+CONFIG_CMD_BAREBOX_UPDATE=y
CONFIG_CMD_OF_NODE=y
CONFIG_CMD_OF_PROPERTY=y
CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIME=y
CONFIG_NET=y
CONFIG_OFDEVICE=y
CONFIG_OF_BAREBOX_DRIVERS=y
CONFIG_DRIVER_SERIAL_AUART=y
CONFIG_DRIVER_NET_FEC_IMX=y
CONFIG_DRIVER_SPI_MXS=y
+CONFIG_I2C=y
CONFIG_MTD=y
CONFIG_NAND=y
CONFIG_NAND_MXS=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_FASTMAP=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DFU=y
CONFIG_USB_GADGET_SERIAL=y
@@ -89,8 +102,15 @@ CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_LED_GPIO_OF=y
CONFIG_LED_TRIGGERS=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_MXS28=y
CONFIG_MXS_APBH_DMA=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED=y
+CONFIG_FS_EXT4=y
CONFIG_FS_TFTP=y
+CONFIG_FS_NFS=y
CONFIG_FS_FAT=y
CONFIG_FS_FAT_WRITE=y
CONFIG_FS_FAT_LFN=y
+CONFIG_FS_UBIFS=y
diff --git a/arch/arm/configs/tx28stk5_defconfig b/arch/arm/configs/tx28stk5_defconfig
deleted file mode 100644
index c712975fd9..0000000000
--- a/arch/arm/configs/tx28stk5_defconfig
+++ /dev/null
@@ -1,94 +0,0 @@
-CONFIG_ARCH_MXS=y
-CONFIG_ARCH_IMX28=y
-CONFIG_AEABI=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_ARM_UNWIND=y
-CONFIG_MMU=y
-CONFIG_MALLOC_SIZE=0x0
-CONFIG_MALLOC_TLSF=y
-CONFIG_KALLSYMS=y
-CONFIG_RELOCATABLE=y
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_MENU=y
-CONFIG_BOOTM_SHOW_TYPE=y
-CONFIG_BOOTM_VERBOSE=y
-CONFIG_BOOTM_INITRD=y
-CONFIG_BOOTM_OFTREE=y
-CONFIG_BOOTM_OFTREE_UIMAGE=y
-CONFIG_BLSPEC=y
-CONFIG_IMD=y
-CONFIG_PBL_CONSOLE=y
-CONFIG_DEFAULT_COMPRESSION_LZO=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_RESET_SOURCE=y
-CONFIG_DEBUG_LL=y
-CONFIG_CMD_DMESG=y
-CONFIG_LONGHELP=y
-CONFIG_CMD_IOMEM=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_GO=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_UIMAGE=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_DEFAULTENV=y
-CONFIG_CMD_LOADENV=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_MAGICVAR=y
-CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_CMP=y
-CONFIG_CMD_FILETYPE=y
-CONFIG_CMD_LN=y
-CONFIG_CMD_MD5SUM=y
-CONFIG_CMD_SHA1SUM=y
-CONFIG_CMD_SHA224SUM=y
-CONFIG_CMD_SHA256SUM=y
-CONFIG_CMD_UNCOMPRESS=y
-CONFIG_CMD_LET=y
-CONFIG_CMD_MSLEEP=y
-CONFIG_CMD_READF=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MIITOOL=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_MENUTREE=y
-CONFIG_CMD_SPLASH=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_CRC=y
-CONFIG_CMD_CRC_CMP=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DETECT=y
-CONFIG_CMD_FLASH=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_2048=y
-CONFIG_CMD_OF_NODE=y
-CONFIG_CMD_OF_PROPERTY=y
-CONFIG_CMD_OF_DISPLAY_TIMINGS=y
-CONFIG_CMD_OFTREE=y
-CONFIG_CMD_TIME=y
-CONFIG_NET=y
-CONFIG_DRIVER_SERIAL_AUART=y
-CONFIG_DRIVER_NET_FEC_IMX=y
-# CONFIG_SPI is not set
-CONFIG_MTD=y
-CONFIG_VIDEO=y
-CONFIG_DRIVER_VIDEO_STM=y
-CONFIG_MCI=y
-CONFIG_MCI_STARTUP=y
-CONFIG_MCI_MXS=y
-CONFIG_MXS_APBH_DMA=y
-CONFIG_FS_EXT4=y
-CONFIG_FS_TFTP=y
-CONFIG_FS_NFS=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FAT_WRITE=y
-CONFIG_FS_FAT_LFN=y
-CONFIG_ZLIB=y
-CONFIG_LZO_DECOMPRESS=y
--
2.23.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 16/16] ARM: add common i.MX23 defconfig file
2019-09-18 7:54 [PATCH 00/16] ARM: mxs: full multi image support Sascha Hauer
` (14 preceding siblings ...)
2019-09-18 7:54 ` [PATCH 15/16] ARM: add common i.MX28 defconfig file Sascha Hauer
@ 2019-09-18 7:54 ` Sascha Hauer
15 siblings, 0 replies; 17+ messages in thread
From: Sascha Hauer @ 2019-09-18 7:54 UTC (permalink / raw)
To: Barebox List
Merge the defconfigs for the i.MX23 boards into a common
imx23_defconfig.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/configs/chumbyone_defconfig | 46 ----------------
arch/arm/configs/freescale-mx23-evk_defconfig | 28 ----------
...33-olinuxino_defconfig => imx23_defconfig} | 54 +++++++++++--------
3 files changed, 31 insertions(+), 97 deletions(-)
delete mode 100644 arch/arm/configs/chumbyone_defconfig
delete mode 100644 arch/arm/configs/freescale-mx23-evk_defconfig
rename arch/arm/configs/{imx233-olinuxino_defconfig => imx23_defconfig} (72%)
diff --git a/arch/arm/configs/chumbyone_defconfig b/arch/arm/configs/chumbyone_defconfig
deleted file mode 100644
index 2b38b8cf88..0000000000
--- a/arch/arm/configs/chumbyone_defconfig
+++ /dev/null
@@ -1,46 +0,0 @@
-CONFIG_ARCH_MXS=y
-CONFIG_MACH_CHUMBY=y
-CONFIG_AEABI=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_MMU=y
-CONFIG_MALLOC_SIZE=0x1000000
-CONFIG_PROMPT="chumby:"
-CONFIG_GLOB=y
-CONFIG_HUSH_FANCY_PROMPT=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/chumby_falconwing/env"
-CONFIG_LONGHELP=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_GO=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_LOADENV=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_GETOPT=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_SPLASH=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-CONFIG_CMD_GPIO=y
-CONFIG_NET=y
-CONFIG_NET_NFS=y
-CONFIG_NET_NETCONSOLE=y
-CONFIG_NET_RESOLV=y
-CONFIG_NET_USB=y
-CONFIG_NET_USB_ASIX=y
-# CONFIG_SPI is not set
-CONFIG_USB_HOST=y
-CONFIG_USB_EHCI=y
-CONFIG_VIDEO=y
-CONFIG_DRIVER_VIDEO_STM=y
-CONFIG_MCI=y
-CONFIG_MCI_STARTUP=y
-CONFIG_FS_TFTP=y
diff --git a/arch/arm/configs/freescale-mx23-evk_defconfig b/arch/arm/configs/freescale-mx23-evk_defconfig
deleted file mode 100644
index 2b12e297b3..0000000000
--- a/arch/arm/configs/freescale-mx23-evk_defconfig
+++ /dev/null
@@ -1,28 +0,0 @@
-CONFIG_ARCH_MXS=y
-CONFIG_AEABI=y
-CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
-CONFIG_CMDLINE_EDITING=y
-CONFIG_AUTO_COMPLETE=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_RESET_SOURCE=y
-CONFIG_LONGHELP=y
-CONFIG_CMD_RESET=y
-CONFIG_CMD_PARTITION=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_TIMEOUT=y
-# CONFIG_SPI is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DFU=y
-CONFIG_MCI=y
-CONFIG_MCI_STARTUP=y
-CONFIG_MCI_MXS=y
-CONFIG_FS_EXT4=y
-CONFIG_FS_FAT=y
-CONFIG_FS_FAT_WRITE=y
-CONFIG_FS_FAT_LFN=y
diff --git a/arch/arm/configs/imx233-olinuxino_defconfig b/arch/arm/configs/imx23_defconfig
similarity index 72%
rename from arch/arm/configs/imx233-olinuxino_defconfig
rename to arch/arm/configs/imx23_defconfig
index 15d15a0b9d..26c63814b9 100644
--- a/arch/arm/configs/imx233-olinuxino_defconfig
+++ b/arch/arm/configs/imx23_defconfig
@@ -1,11 +1,13 @@
CONFIG_ARCH_MXS=y
+CONFIG_MACH_MX23EVK=y
+CONFIG_MACH_CHUMBY=y
CONFIG_MACH_IMX233_OLINUXINO=y
CONFIG_MXS_OCOTP=y
CONFIG_AEABI=y
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
CONFIG_ARM_UNWIND=y
CONFIG_MMU=y
-CONFIG_MALLOC_SIZE=0x1000000
+CONFIG_MALLOC_SIZE=0x0
CONFIG_MALLOC_TLSF=y
CONFIG_KALLSYMS=y
CONFIG_RELOCATABLE=y
@@ -16,11 +18,8 @@ CONFIG_MENU=y
CONFIG_BOOTM_SHOW_TYPE=y
CONFIG_BOOTM_VERBOSE=y
CONFIG_BOOTM_INITRD=y
-CONFIG_BOOTM_OFTREE=y
-CONFIG_BOOTM_OFTREE_UIMAGE=y
CONFIG_BLSPEC=y
-CONFIG_CONSOLE_ACTIVATE_ALL=y
-CONFIG_DEFAULT_COMPRESSION_LZO=y
+CONFIG_CONSOLE_ALLOW_COLOR=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
CONFIG_RESET_SOURCE=y
CONFIG_CMD_DMESG=y
@@ -31,9 +30,9 @@ CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_BOOTU is not set
CONFIG_CMD_GO=y
CONFIG_CMD_RESET=y
+CONFIG_CMD_UIMAGE=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_EXPORT=y
-CONFIG_CMD_DEFAULTENV=y
CONFIG_CMD_LOADENV=y
CONFIG_CMD_PRINTENV=y
CONFIG_CMD_MAGICVAR=y
@@ -44,7 +43,6 @@ CONFIG_CMD_FILETYPE=y
CONFIG_CMD_LN=y
CONFIG_CMD_MD5SUM=y
CONFIG_CMD_SHA1SUM=y
-CONFIG_CMD_SHA224SUM=y
CONFIG_CMD_SHA256SUM=y
CONFIG_CMD_UNCOMPRESS=y
CONFIG_CMD_LET=y
@@ -56,35 +54,42 @@ CONFIG_CMD_PING=y
CONFIG_CMD_TFTP=y
CONFIG_CMD_ECHO_E=y
CONFIG_CMD_EDIT=y
-CONFIG_CMD_MENU=y
-CONFIG_CMD_MENU_MANAGEMENT=y
CONFIG_CMD_MENUTREE=y
CONFIG_CMD_SPLASH=y
CONFIG_CMD_READLINE=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_CRC=y
CONFIG_CMD_CRC_CMP=y
-CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MM=y
CONFIG_CMD_CLK=y
CONFIG_CMD_DETECT=y
CONFIG_CMD_FLASH=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_2048=y
+CONFIG_CMD_LED=y
+CONFIG_CMD_NANDTEST=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_LED_TRIGGER=y
+CONFIG_CMD_USBGADGET=y
+CONFIG_CMD_BAREBOX_UPDATE=y
CONFIG_CMD_OF_NODE=y
CONFIG_CMD_OF_PROPERTY=y
-CONFIG_CMD_OF_DISPLAY_TIMINGS=y
CONFIG_CMD_OFTREE=y
CONFIG_CMD_TIME=y
CONFIG_NET=y
-CONFIG_NET_NFS=y
-CONFIG_NET_NETCONSOLE=y
+CONFIG_OFDEVICE=y
+CONFIG_OF_BAREBOX_DRIVERS=y
CONFIG_DRIVER_SERIAL_AUART=y
-CONFIG_NET_USB=y
-CONFIG_NET_USB_SMSC95XX=y
-# CONFIG_SPI is not set
-CONFIG_USB_HOST=y
-CONFIG_USB_EHCI=y
-CONFIG_USB_STORAGE=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
+CONFIG_MTD=y
+CONFIG_NAND=y
+CONFIG_NAND_MXS=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DFU=y
+CONFIG_USB_GADGET_SERIAL=y
+CONFIG_USB_GADGET_FASTBOOT=y
CONFIG_VIDEO=y
CONFIG_DRIVER_VIDEO_STM=y
CONFIG_MCI=y
@@ -92,14 +97,17 @@ CONFIG_MCI_STARTUP=y
CONFIG_MCI_MXS=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
+CONFIG_LED_GPIO_OF=y
CONFIG_LED_TRIGGERS=y
-CONFIG_KEYBOARD_GPIO=y
+CONFIG_EEPROM_AT24=y
+CONFIG_WATCHDOG=y
CONFIG_MXS_APBH_DMA=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED=y
CONFIG_FS_EXT4=y
CONFIG_FS_TFTP=y
CONFIG_FS_NFS=y
CONFIG_FS_FAT=y
CONFIG_FS_FAT_WRITE=y
CONFIG_FS_FAT_LFN=y
-CONFIG_ZLIB=y
-CONFIG_LZO_DECOMPRESS=y
+CONFIG_FS_UBIFS=y
--
2.23.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 17+ messages in thread